{ ****************************
{  THIS IS OPEN SOURCE CODE 
{ ****************************
{ (C) COPYRIGHT International Business Machines Corp. 2005
{ This file is licensed under the University of Tennessee license.
{ See LICENSE.txt.
{
{ File:    events/power5/events
{ Author:  Maynard Johnson
{          maynardj@us.ibm.com
{ Mods: 
{

{ counter 1 }
#0,v,g,n,n,PM_0INST_CLB_CYC,Cycles no instructions in CLB
##400C0
Cycles no instructions in CLB
#1,v,g,n,n,PM_1INST_CLB_CYC,Cycles 1 instruction in CLB
##400C1
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#2,v,g,n,n,PM_1PLUS_PPC_CMPL,One or more PPC instruction completed
##00013
A group containing at least one PPC instruction completed. For microcoded instructions that span multiple groups, this will only occur once.
#3,v,g,n,n,PM_2INST_CLB_CYC,Cycles 2 instructions in CLB
##400C2
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#4,v,g,n,n,PM_3INST_CLB_CYC,Cycles 3 instructions in CLB
##400C3
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#5,v,g,n,n,PM_4INST_CLB_CYC,Cycles 4 instructions in CLB
##400C4
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#6,v,g,n,n,PM_5INST_CLB_CYC,Cycles 5 instructions in CLB
##400C5
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#7,v,g,n,n,PM_6INST_CLB_CYC,Cycles 6 instructions in CLB
##400C6
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#8,u,g,n,s,PM_BRQ_FULL_CYC,Cycles branch queue full
##100C5
The ISU sends a signal indicating that the issue queue that feeds the ifu br unit cannot accept any more group (queue is full of groups).
#9,v,g,n,n,PM_BR_UNCOND,Unconditional branch
##23087
Unconditional branch
#10,v,g,n,n,PM_CLB_FULL_CYC,Cycles CLB full
##220E5
Cycles CLB full
#11,v,g,n,s,PM_CR_MAP_FULL_CYC,Cycles CR logical operation mapper full
##100C4
The ISU sends a signal indicating that the cr mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#12,v,g,n,s,PM_CYC,Processor cycles
##0000F
Processor cycles
#13,v,g,n,n,PM_DATA_FROM_L2,Data loaded from L2
##C3087
DL1 was reloaded from the local L2 due to a demand load
#14,v,g,n,n,PM_DATA_FROM_L25_SHR,Data loaded from L2.5 shared
##C3097
DL1 was reloaded with shared (T or SL) data from the L2 of a chip on this MCM due to a demand load
#15,v,g,n,n,PM_DATA_FROM_L275_MOD,Data loaded from L2.75 modified
##C30A3
DL1 was reloaded with modified (M) data from the L2 of another MCM due to a demand load. 
#16,v,g,n,n,PM_DATA_FROM_L3,Data loaded from L3
##C308E
DL1 was reloaded from the local L3 due to a demand load
#17,v,g,n,n,PM_DATA_FROM_L35_SHR,Data loaded from L3.5 shared
##C309E
Data loaded from L3.5 shared
#18,v,g,n,n,PM_DATA_FROM_L375_MOD,Data loaded from L3.75 modified
##C30A7
Data loaded from L3.75 modified
#19,v,g,n,n,PM_DATA_FROM_RMEM,Data loaded from remote memory
##C30A1
Data loaded from remote memory
#20,v,g,n,n,PM_DATA_TABLEWALK_CYC,Cycles doing data tablewalks
##800C7
This signal is asserted every cycle when a tablewalk is active. While a tablewalk is active any request attempting to access the TLB will be rejected and retried.
#21,v,g,n,n,PM_DSLB_MISS,Data SLB misses
##800C5
A SLB miss for a data request occurred. SLB misses trap to the operating system to resolve
#22,v,g,n,n,PM_DTLB_MISS,Data TLB misses
##800C4
A TLB miss for a data request occurred. Requests that miss the TLB may be retried until the instruction is in the next to complete group (unless HID4 is set to allow speculative tablewalks). This may result in multiple TLB misses for the same instruction.
#23,v,g,n,n,PM_DTLB_MISS_16M,Data TLB miss for 16M page
##C40C4
Data TLB miss for 16M page
#24,v,g,n,n,PM_DTLB_MISS_4K,Data TLB miss for 4K page
##C40C0
Data TLB miss for 4K page
#25,v,g,n,n,PM_DTLB_REF_16M,Data TLB reference for 16M page
##C40C6
Data TLB reference for 16M page
#26,v,g,n,n,PM_DTLB_REF_4K,Data TLB reference for 4K page
##C40C2
Data TLB reference for 4K page
#27,v,g,n,s,PM_FAB_CMD_ISSUED,Fabric command issued
##700C7
Fabric command issued
#28,v,g,n,s,PM_FAB_DCLAIM_ISSUED,dclaim issued
##720E7
dclaim issued
#29,v,g,n,s,PM_FAB_HOLDtoNN_EMPTY,Hold buffer to NN empty
##722E7
Hold buffer to NN empty
#30,v,g,n,s,PM_FAB_HOLDtoVN_EMPTY,Hold buffer to VN empty
##721E7
Hold buffer to VN empty
#31,v,g,n,s,PM_FAB_M1toP1_SIDECAR_EMPTY,M1 to P1 sidecar empty
##702C7
M1 to P1 sidecar empty
#32,v,g,n,s,PM_FAB_P1toM1_SIDECAR_EMPTY,P1 to M1 sidecar empty
##701C7
P1 to M1 sidecar empty
#33,v,g,n,s,PM_FAB_PNtoNN_DIRECT,PN to NN beat went straight to its destination
##703C7
PN to NN beat went straight to its destination
#34,v,g,n,s,PM_FAB_PNtoVN_DIRECT,PN to VN beat went straight to its destination
##723E7
PN to VN beat went straight to its destination
#35,v,g,n,s,PM_FPR_MAP_FULL_CYC,Cycles FPR mapper full
##100C1
The ISU sends a signal indicating that the FPR mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#36,v,g,n,n,PM_FPU0_1FLOP,FPU0 executed add, mult, sub, cmp or sel instruction
##000C3
This signal is active for one cycle when fp0 is executing an add, mult, sub, compare, or fsel kind of instruction. This could be fadd*, fmul*, fsub*, fcmp**, fsel where XYZ* means XYZ, XYZs, XYZ., XYZs. and XYZ** means XYZu, XYZo
#37,v,g,n,n,PM_FPU0_DENORM,FPU0 received denormalized data
##020E0
This signal is active for one cycle when one of the operands is denormalized.
#38,v,g,n,n,PM_FPU0_FDIV,FPU0 executed FDIV instruction
##000C0
This signal is active for one cycle at the end of the microcode executed when fp0 is executing a divide instruction. This could be fdiv, fdivs, fdiv. fdivs.
#39,v,g,n,n,PM_FPU0_FMA,FPU0 executed multiply-add instruction
##000C1
This signal is active for one cycle when fp0 is executing multiply-add kind of instruction. This could be fmadd*, fnmadd*, fmsub*, fnmsub* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#40,v,g,n,n,PM_FPU0_FSQRT,FPU0 executed FSQRT instruction
##000C2
This signal is active for one cycle at the end of the microcode executed when fp0 is executing a square root instruction. This could be fsqrt* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#41,v,g,n,s,PM_FPU0_FULL_CYC,Cycles FPU0 issue queue full
##100C3
The issue queue for FPU unit 0 cannot accept any more instructions. Issue is stopped
#42,v,g,n,n,PM_FPU0_SINGLE,FPU0 executed single precision instruction
##020E3
This signal is active for one cycle when fp0 is executing single precision instruction.
#43,v,g,n,n,PM_FPU0_STALL3,FPU0 stalled in pipe3
##020E1
This signal indicates that fp0 has generated a stall in pipe3 due to overflow, underflow, massive cancel, convert to integer (sometimes), or convert from integer (always). This signal is active during the entire duration of the stall. 
#44,v,g,n,n,PM_FPU0_STF,FPU0 executed store instruction
##020E2
This signal is active for one cycle when fp0 is executing a store instruction.
#45,v,g,n,n,PM_FPU1_1FLOP,FPU1 executed add, mult, sub, cmp or sel instruction
##000C7
This signal is active for one cycle when fp1 is executing an add, mult, sub, compare, or fsel kind of instruction. This could be fadd*, fmul*, fsub*, fcmp**, fsel where XYZ* means XYZ, XYZs, XYZ., XYZs. and XYZ** means XYZu, XYZo
#46,v,g,n,n,PM_FPU1_DENORM,FPU1 received denormalized data
##020E4
This signal is active for one cycle when one of the operands is denormalized.
#47,v,g,n,n,PM_FPU1_FDIV,FPU1 executed FDIV instruction
##000C4
This signal is active for one cycle at the end of the microcode executed when fp1 is executing a divide instruction. This could be fdiv, fdivs, fdiv. fdivs.
#48,v,g,n,n,PM_FPU1_FMA,FPU1 executed multiply-add instruction
##000C5
This signal is active for one cycle when fp1 is executing multiply-add kind of instruction. This could be fmadd*, fnmadd*, fmsub*, fnmsub* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#49,v,g,n,n,PM_FPU1_FSQRT,FPU1 executed FSQRT instruction
##000C6
This signal is active for one cycle at the end of the microcode executed when fp1 is executing a square root instruction. This could be fsqrt* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#50,v,g,n,s,PM_FPU1_FULL_CYC,Cycles FPU1 issue queue full
##100C7
The issue queue for FPU unit 1 cannot accept any more instructions. Issue is stopped
#51,v,g,n,n,PM_FPU1_SINGLE,FPU1 executed single precision instruction
##020E7
This signal is active for one cycle when fp1 is executing single precision instruction.
#52,v,g,n,n,PM_FPU1_STALL3,FPU1 stalled in pipe3
##020E5
This signal indicates that fp1 has generated a stall in pipe3 due to overflow, underflow, massive cancel, convert to integer (sometimes), or convert from integer (always). This signal is active during the entire duration of the stall. 
#53,v,g,n,n,PM_FPU1_STF,FPU1 executed store instruction
##020E6
This signal is active for one cycle when fp1 is executing a store instruction.
#54,v,g,n,n,PM_FPU_DENORM,FPU received denormalized data
##02088
This signal is active for one cycle when one of the operands is denormalized. Combined Unit 0 + Unit 1
#55,v,g,n,n,PM_FPU_FDIV,FPU executed FDIV instruction
##00088
This signal is active for one cycle at the end of the microcode executed when FPU is executing a divide instruction. This could be fdiv, fdivs, fdiv. fdivs. Combined Unit 0 + Unit 1
#56,v,g,n,n,PM_FPU_1FLOP,FPU executed one flop instruction 
##00090
This event counts the number of one flop instructions. These could be fadd*, fmul*, fsub*, fneg+, fabs+, fnabs+, fres+, frsqrte+, fcmp**, or fsel where XYZ* means XYZ, XYZs, XYZ., XYZs., XYZ+ means XYZ, XYZ., and XYZ** means XYZu, XYZo.
#57,c,g,n,n,PM_FPU_FULL_CYC,Cycles FPU issue queue full
##10090
Cycles when one or both FPU issue queues are full
#58,v,g,n,n,PM_FPU_SINGLE,FPU executed single precision instruction
##02090
FPU is executing single precision instruction. Combined Unit 0 + Unit 1
#59,u,g,n,n,PM_FXU_IDLE,FXU idle
##00012
FXU0 and FXU1 are both idle
#60,v,g,n,n,PM_GCT_NOSLOT_CYC,Cycles no GCT slot allocated
##00004
Cycles this thread does not have any slots allocated in the GCT.
#61,v,g,n,n,PM_GCT_FULL_CYC,Cycles GCT full
##100C0
The ISU sends a signal indicating the gct is full. 
#62,v,g,n,s,PM_GCT_USAGE_00to59_CYC,Cycles GCT less than 60% full
##0001F
Cycles GCT less than 60% full
#63,v,g,n,n,PM_GRP_BR_REDIR,Group experienced branch redirect
##120E6
Group experienced branch redirect
#64,v,g,n,n,PM_GRP_BR_REDIR_NONSPEC,Group experienced non-speculative branch redirect
##120E5
Group experienced non-speculative branch redirect
#65,v,g,n,n,PM_GRP_DISP_REJECT,Group dispatch rejected
##120E4
A group that previously attempted dispatch was rejected.
#66,v,g,n,n,PM_GRP_DISP_VALID,Group dispatch valid
##120E3
Dispatch has been attempted for a valid group.  Some groups may be rejected.  The total number of successful dispatches is the number of dispatch valid minus dispatch reject.
#67,v,g,n,n,PM_GRP_IC_MISS,Group experienced I cache miss
##120E7
Group experienced I cache miss
#68,v,g,n,n,PM_GRP_IC_MISS_BR_REDIR_NONSPEC,Group experienced non-speculative I cache miss or branch redirect
##12091
Group experienced non-speculative I cache miss or branch redirect
#69,v,g,n,n,PM_GRP_IC_MISS_NONSPEC,Group experienced non-speculative I cache miss
##12099
Group experienced non-speculative I cache miss
#70,v,g,n,n,PM_GRP_MRK,Group marked in IDU
##00014
A group was sampled (marked)
#71,v,g,n,n,PM_IC_PREF_REQ,Instruction prefetch requests
##220E6
Asserted when a non-canceled prefetch is made to the cache interface unit (CIU).
#72,v,g,n,n,PM_IERAT_XLATE_WR,Translation written to ierat
##220E7
This signal will be asserted each time the I-ERAT is written. This indicates that an ERAT miss has been serviced. ERAT misses will initiate a sequence resulting in the ERAT being written. ERAT misses that are later ignored will not be counted unless the ERAT is written before the instruction stream is changed, This should be a fairly accurate count of ERAT missed (best available).
#73,v,g,n,n,PM_INST_CMPL,Instructions completed
##00001
Number of Eligible Instructions that completed. 
#74,v,g,n,n,PM_INST_DISP,Instructions dispatched
##120E1
The ISU sends the number of instructions dispatched.
#75,v,g,n,n,PM_INST_FETCH_CYC,Cycles at least 1 instruction fetched
##220E4
Asserted each cycle when the IFU sends at least one instruction to the IDU. 
#76,v,g,n,n,PM_INST_FROM_L2,Instructions fetched from L2
##22086
An instruction fetch group was fetched from L2. Fetch Groups can contain up to 8 instructions
#77,v,g,n,n,PM_INST_FROM_L25_SHR,Instruction fetched from L2.5 shared
##22096
Instruction fetched from L2.5 shared
#78,v,g,n,n,PM_INST_FROM_L3,Instruction fetched from L3
##2208D
An instruction fetch group was fetched from L3. Fetch Groups can contain up to 8 instructions
#79,v,g,n,n,PM_INST_FROM_L35_SHR,Instruction fetched from L3.5 shared
##2209D
Instruction fetched from L3.5 shared
#80,u,g,n,n,PM_ISLB_MISS,Instruction SLB misses
##800C1
A SLB miss for an instruction fetch as occurred
#81,v,g,n,n,PM_ITLB_MISS,Instruction TLB misses
##800C0
A TLB miss for an Instruction Fetch has occurred
#82,v,g,n,s,PM_L2SA_MOD_TAG,L2 slice A transition from modified to tagged
##720E0
A cache line in the local L2 directory made a state transition from the Modified state to the Tagged state. This transition was caused by a read snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#83,v,g,n,s,PM_L2SA_RCLD_DISP,L2 Slice A RC load dispatch attempt
##701C0
L2 Slice A RC load dispatch attempt
#84,v,g,n,s,PM_L2SA_RCLD_DISP_FAIL_RC_FULL,L2 Slice A RC load dispatch attempt failed due to all RC full
##721E0
L2 Slice A RC load dispatch attempt failed due to all RC full
#85,v,g,n,s,PM_L2SA_RCST_DISP,L2 Slice A RC store dispatch attempt
##702C0
L2 Slice A RC store dispatch attempt
#86,v,g,n,s,PM_L2SA_RCST_DISP_FAIL_RC_FULL,L2 Slice A RC store dispatch attempt failed due to all RC full
##722E0
L2 Slice A RC store dispatch attempt failed due to all RC full
#87,v,g,n,s,PM_L2SA_RC_DISP_FAIL_CO_BUSY,L2 Slice A RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
##703C0
L2 Slice A RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
#88,v,g,n,s,PM_L2SA_SHR_MOD,L2 slice A transition from shared to modified
##700C0
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L , or Tagged) to the Modified state. This transition was caused by a store from either of the two local CPUs to a cache line in any of the Shared states. The event is provided on each of the three slices A,B,and C. 
#89,v,g,n,n,PM_L2SA_ST_REQ,L2 slice A store requests
##723E0
A store request as seen at the L2 directory has been made from the core. Stores are counted after gathering in the L2 store queues. The event is provided on each of the three slices A,B,and C.
#90,v,g,n,s,PM_L2SB_MOD_TAG,L2 slice B transition from modified to tagged
##720E1
A cache line in the local L2 directory made a state transition from the Modified state to the Tagged state. This transition was caused by a read snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#91,v,g,n,s,PM_L2SB_RCLD_DISP,L2 Slice B RC load dispatch attempt
##701C1
L2 Slice B RC load dispatch attempt
#92,v,g,n,s,PM_L2SB_RCLD_DISP_FAIL_RC_FULL,L2 Slice B RC load dispatch attempt failed due to all RC full
##721E1
L2 Slice B RC load dispatch attempt failed due to all RC full
#93,v,g,n,s,PM_L2SB_RCST_DISP,L2 Slice B RC store dispatch attempt
##702C1
L2 Slice B RC store dispatch attempt
#94,v,g,n,s,PM_L2SB_RCST_DISP_FAIL_RC_FULL,L2 Slice B RC store dispatch attempt failed due to all RC full
##722E1
L2 Slice B RC store dispatch attempt failed due to all RC full
#95,v,g,n,s,PM_L2SB_RC_DISP_FAIL_CO_BUSY,L2 Slice B RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
##703C1
L2 Slice B RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
#96,v,g,n,s,PM_L2SB_SHR_MOD,L2 slice B transition from shared to modified
##700C1
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L , or Tagged) to the Modified state. This transition was caused by a store from either of the two local CPUs to a cache line in any of the Shared states. The event is provided on each of the three slices A,B,and C. 
#97,v,g,n,n,PM_L2SB_ST_REQ,L2 slice B store requests
##723E1
A store request as seen at the L2 directory has been made from the core. Stores are counted after gathering in the L2 store queues. The event is provided on each of the three slices A,B,and C.
#98,v,g,n,s,PM_L2SC_MOD_TAG,L2 slice C transition from modified to tagged
##720E2
A cache line in the local L2 directory made a state transition from the Modified state to the Tagged state. This transition was caused by a read snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#99,v,g,n,s,PM_L2SC_RCLD_DISP,L2 Slice C RC load dispatch attempt
##701C2
L2 Slice C RC load dispatch attempt
#100,v,g,n,s,PM_L2SC_RCLD_DISP_FAIL_RC_FULL,L2 Slice C RC load dispatch attempt failed due to all RC full
##721E2
L2 Slice C RC load dispatch attempt failed due to all RC full
#101,v,g,n,s,PM_L2SC_RCST_DISP,L2 Slice C RC store dispatch attempt
##702C2
L2 Slice C RC store dispatch attempt
#102,v,g,n,s,PM_L2SC_RCST_DISP_FAIL_RC_FULL,L2 Slice C RC store dispatch attempt failed due to all RC full
##722E2
L2 Slice C RC store dispatch attempt failed due to all RC full
#103,v,g,n,s,PM_L2SC_RC_DISP_FAIL_CO_BUSY,L2 Slice C RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
##703C2
L2 Slice C RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
#104,v,g,n,s,PM_L2SC_SHR_MOD,L2 slice C transition from shared to modified
##700C2
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L , or Tagged) to the Modified state. This transition was caused by a store from either of the two local CPUs to a cache line in any of the Shared states. The event is provided on each of the three slices A,B,and C. 
#105,v,g,n,n,PM_L2SC_ST_REQ,L2 slice C store requests
##723E2
A store request as seen at the L2 directory has been made from the core. Stores are counted after gathering in the L2 store queues. The event is provided on each of the three slices A,B,and C.
#106,v,g,n,s,PM_L3SA_ALL_BUSY,L3 slice A active for every cycle all CI/CO machines busy
##721E3
L3 slice A active for every cycle all CI/CO machines busy
#107,v,g,n,s,PM_L3SA_MOD_TAG,L3 slice A transition from modified to TAG
##720E3
L3 slice A transition from modified to TAG
#108,v,g,n,s,PM_L3SA_REF,L3 slice A references
##701C3
L3 slice A references
#109,v,g,n,s,PM_L3SB_ALL_BUSY,L3 slice B active for every cycle all CI/CO machines busy
##721E4
L3 slice B active for every cycle all CI/CO machines busy
#110,v,g,n,s,PM_L3SB_MOD_TAG,L3 slice B transition from modified to TAG
##720E4
L3 slice B transition from modified to TAG
#111,v,g,n,s,PM_L3SB_REF,L3 slice B references
##701C4
L3 slice B references
#112,v,g,n,s,PM_L3SC_ALL_BUSY,L3 slice C active for every cycle all CI/CO machines busy
##721E5
L3 slice C active for every cycle all CI/CO machines busy
#113,v,g,n,s,PM_L3SC_MOD_TAG,L3 slice C transition from modified to TAG
##720E5
L3 slice C transition from modified to TAG
#114,v,g,n,s,PM_L3SC_REF,L3 slice C references
##701C5
L3 slice C references
#115,v,g,n,n,PM_LARX_LSU0,Larx executed on LSU0
##820E7
A larx (lwarx or ldarx) was executed on side 0 (there is no coresponding unit 1 event since larx instructions can only execute on unit 0)
#116,u,g,n,s,PM_LR_CTR_MAP_FULL_CYC,Cycles LR/CTR mapper full
##100C6
The ISU sends a signal indicating that the lr/ctr mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#117,v,g,n,n,PM_LSU0_BUSY_REJECT,LSU0 busy due to reject
##C20E3
LSU unit 0 busy due to reject
#118,v,g,n,n,PM_LSU0_DERAT_MISS,LSU0 DERAT misses
##800C2
A data request (load or store) from LSU Unit 0 missed the ERAT and resulted in an ERAT reload. Multiple instructions may miss the ERAT entry for the same 4K page, but only one reload will occur.
#119,v,g,n,n,PM_LSU0_FLUSH_LRQ,LSU0 LRQ flushes
##C00C2
A load was flushed by unit 1 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#120,u,g,n,n,PM_LSU0_FLUSH_SRQ,LSU0 SRQ flushes
##C00C3
A store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#121,v,g,n,n,PM_LSU0_FLUSH_ULD,LSU0 unaligned load flushes
##C00C0
A load was flushed from unit 0 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#122,v,g,n,n,PM_LSU0_FLUSH_UST,LSU0 unaligned store flushes
##C00C1
A store was flushed from unit 0 because it was unaligned (crossed a 4k boundary)
#123,v,g,n,n,PM_LSU0_REJECT_ERAT_MISS,LSU0 reject due to ERAT miss
##C60E3
LSU0 reject due to ERAT miss
#124,v,g,n,n,PM_LSU0_REJECT_LMQ_FULL,LSU0 reject due to LMQ full or missed data coming
##C60E1
LSU0 reject due to LMQ full or missed data coming
#125,v,g,n,n,PM_LSU0_REJECT_RELOAD_CDF,LSU0 reject due to reload CDF or tag update collision
##C60E2
LSU0 reject due to reload CDF or tag update collision
#126,v,g,n,n,PM_LSU0_REJECT_SRQ_LHS,LSU0 SRQ rejects
##C60E0
LSU0 reject due to load hit store
#127,u,g,n,n,PM_LSU0_SRQ_STFWD,LSU0 SRQ store forwarded
##C20E0
Data from a store instruction was forwarded to a load on unit 0
#128,v,g,n,n,PM_LSU1_BUSY_REJECT,LSU1 busy due to reject
##C20E7
LSU unit 1 is busy due to reject
#129,v,g,n,n,PM_LSU1_DERAT_MISS,LSU1 DERAT misses
##800C6
A data request (load or store) from LSU Unit 1 missed the ERAT and resulted in an ERAT reload. Multiple instructions may miss the ERAT entry for the same 4K page, but only one reload will occur.
#130,v,g,n,n,PM_LSU1_FLUSH_LRQ,LSU1 LRQ flushes
##C00C6
A load was flushed by unit 1 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#131,u,g,n,n,PM_LSU1_FLUSH_SRQ,LSU1 SRQ flushes
##C00C7
A store was flushed because younger load hits and older store that is already in the SRQ or in the same group. 
#132,v,g,n,n,PM_LSU1_FLUSH_ULD,LSU1 unaligned load flushes
##C00C4
A load was flushed from unit 1 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#133,u,g,n,n,PM_LSU1_FLUSH_UST,LSU1 unaligned store flushes
##C00C5
A store was flushed from unit 1 because it was unaligned (crossed a 4k boundary)
#134,v,g,n,n,PM_LSU1_REJECT_ERAT_MISS,LSU1 reject due to ERAT miss
##C60E7
LSU1 reject due to ERAT miss
#135,v,g,n,n,PM_LSU1_REJECT_LMQ_FULL,LSU1 reject due to LMQ full or missed data coming
##C60E5
LSU1 reject due to LMQ full or missed data coming
#136,v,g,n,n,PM_LSU1_REJECT_RELOAD_CDF,LSU1 reject due to reload CDF or tag update collision
##C60E6
LSU1 reject due to reload CDF or tag update collision
#137,v,g,n,n,PM_LSU1_REJECT_SRQ_LHS,LSU1 SRQ rejects
##C60E4
LSU1 reject due to load hit store
#138,u,g,n,n,PM_LSU1_SRQ_STFWD,LSU1 SRQ store forwarded
##C20E4
Data from a store instruction was forwarded to a load on unit 1
#139,v,g,n,n,PM_LSU_BUSY_REJECT,LSU busy due to reject
##C2090
LSU (unit 0 + unit 1) is busy due to reject
#140,v,g,n,s,PM_LSU_FLUSH_LRQ_FULL,Flush caused by LRQ full
##320E7
Flush caused by LRQ full
#141,u,g,n,n,PM_LSU_FLUSH_SRQ,SRQ flushes
##C0090
A store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#142,v,g,n,n,PM_LSU_FLUSH_ULD,LRQ unaligned load flushes
##C0088
A load was flushed because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#143,v,g,n,n,PM_LSU_LRQ_S0_ALLOC,LRQ slot 0 allocated
##C20E6
LRQ slot zero was allocated
#144,v,g,n,n,PM_LSU_LRQ_S0_VALID,LRQ slot 0 valid
##C20E2
This signal is asserted every cycle that the Load Request Queue slot zero is valid. The SRQ is 32 entries long and is allocated round-robin.
#145,v,g,n,n,PM_LSU_REJECT_ERAT_MISS,LSU reject due to ERAT miss
##C6090
LSU reject due to ERAT miss
#146,v,g,n,n,PM_LSU_REJECT_SRQ_LHS,LSU SRQ rejects
##C6088
LSU reject due to load hit store
#147,v,g,n,n,PM_LSU_SRQ_S0_ALLOC,SRQ slot 0 allocated
##C20E5
SRQ Slot zero was allocated
#148,v,g,n,n,PM_LSU_SRQ_S0_VALID,SRQ slot 0 valid
##C20E1
This signal is asserted every cycle that the Store Request Queue slot zero is valid. The SRQ is 32 entries long and is allocated round-robin.
#149,c,g,n,n,PM_LSU_SRQ_STFWD,SRQ store forwarded
##C2088
Data from a store instruction was forwarded to a load
#150,v,g,n,s,PM_MEM_FAST_PATH_RD_CMPL,Fast path memory read completed
##722E6
Fast path memory read completed
#151,v,g,n,s,PM_MEM_HI_PRIO_PW_CMPL,High priority partial-write completed
##727E6
High priority partial-write completed
#152,v,g,n,s,PM_MEM_HI_PRIO_WR_CMPL,High priority write completed
##726E6
High priority write completed
#153,v,g,n,s,PM_MEM_PWQ_DISP,Memory partial-write queue dispatched
##704C6
Memory partial-write queue dispatched
#154,v,g,n,s,PM_MEM_PWQ_DISP_BUSY2or3,Memory partial-write queue dispatched with 2-3 queues busy
##724E6
Memory partial-write queue dispatched with 2-3 queues busy
#155,v,g,n,s,PM_MEM_READ_CMPL,Memory read completed or canceled
##702C6
Memory read completed or canceled
#156,v,g,n,s,PM_MEM_RQ_DISP,Memory read queue dispatched
##701C6
Memory read queue dispatched
#157,v,g,n,s,PM_MEM_RQ_DISP_BUSY8to15,Memory read queue dispatched with 8-15 queues busy
##721E6
Memory read queue dispatched with 8-15 queues busy
#158,v,g,n,s,PM_MEM_WQ_DISP_BUSY1to7,Memory write queue dispatched with 1-7 queues busy
##723E6
Memory write queue dispatched with 1-7 queues busy
#159,v,g,n,s,PM_MEM_WQ_DISP_WRITE,Memory write queue dispatched due to write
##703C6
Memory write queue dispatched due to write
#160,v,g,n,n,PM_MRK_DATA_FROM_L2,Marked data loaded from L2
##C7087
DL1 was reloaded from the local L2 due to a marked demand load
#161,v,g,n,n,PM_MRK_DATA_FROM_L25_SHR,Marked data loaded from L2.5 shared
##C7097
DL1 was reloaded with shared (T or SL) data from the L2 of a chip on this MCM due to a marked demand load
#162,v,g,n,n,PM_MRK_DATA_FROM_L275_MOD,Marked data loaded from L2.75 modified
##C70A3
DL1 was reloaded with modified (M) data from the L2 of another MCM due to a marked demand load. 
#163,v,g,n,n,PM_MRK_DATA_FROM_L3,Marked data loaded from L3
##C708E
DL1 was reloaded from the local L3 due to a marked demand load
#164,v,g,n,n,PM_MRK_DATA_FROM_L35_SHR,Marked data loaded from L3.5 shared
##C709E
Marked data loaded from L3.5 shared
#165,v,g,n,n,PM_MRK_DATA_FROM_L375_MOD,Marked data loaded from L3.75 modified
##C70A7
Marked data loaded from L3.75 modified
#166,v,g,n,n,PM_MRK_DATA_FROM_RMEM,Marked data loaded from remote memory
##C70A1
Marked data loaded from remote memory
#167,v,g,n,n,PM_MRK_DTLB_MISS_16M,Marked Data TLB misses for 16M page
##C40C5
Marked Data TLB misses for 16M page
#168,v,g,n,n,PM_MRK_DTLB_MISS_4K,Marked Data TLB misses for 4K page
##C40C1
Marked Data TLB misses for 4K page
#169,v,g,n,n,PM_MRK_DTLB_REF_16M,Marked Data TLB reference for 16M page
##C40C7
Marked Data TLB reference for 16M page
#170,v,g,n,n,PM_MRK_DTLB_REF_4K,Marked Data TLB reference for 4K page
##C40C3
Marked Data TLB reference for 4K page
#171,v,g,n,n,PM_MRK_GRP_DISP,Marked group dispatched
##00002
A group containing a sampled instruction was dispatched
#172,v,g,n,n,PM_MRK_GRP_ISSUED,Marked group issued
##00015
A sampled instruction was issued
#173,v,g,n,n,PM_MRK_IMR_RELOAD,Marked IMR reloaded
##820E2
A DL1 reload occured due to marked load
#174,v,g,n,n,PM_INST_CMPL,Instructions completed
##00009
Number of PPC instructions completed. 
#175,v,g,n,n,PM_MRK_LD_MISS_L1,Marked L1 D cache load misses
##82088
Marked L1 D cache load misses
#176,v,g,n,n,PM_MRK_LD_MISS_L1_LSU0,LSU0 L1 D cache load misses
##820E0
A marked load, executing on unit 0, missed the dcache
#177,v,g,n,n,PM_MRK_LD_MISS_L1_LSU1,LSU1 L1 D cache load misses
##820E4
A marked load, executing on unit 1, missed the dcache
#178,v,g,n,n,PM_MRK_STCX_FAIL,Marked STCX failed
##820E6
A marked stcx (stwcx or stdcx) failed
#179,v,g,n,n,PM_MRK_ST_CMPL,Marked store instruction completed
##00003
A sampled store has completed (data home)
#180,v,g,n,n,PM_MRK_ST_MISS_L1,Marked L1 D cache store misses
##820E3
A marked store missed the dcache
#181,v,g,n,n,PM_PMC4_OVERFLOW,PMC4 Overflow
##0000A
PMC4 Overflow
#182,v,g,n,n,PM_PMC5_OVERFLOW,PMC5 Overflow
##0001A
PMC5 Overflow
#183,v,g,n,n,PM_PTEG_FROM_L2,PTEG loaded from L2
##83087
PTEG loaded from L2
#184,v,g,n,n,PM_PTEG_FROM_L25_SHR,PTEG loaded from L2.5 shared
##83097
PTEG loaded from L2.5 shared
#185,v,g,n,n,PM_PTEG_FROM_L275_MOD,PTEG loaded from L2.75 modified
##830A3
PTEG loaded from L2.75 modified
#186,v,g,n,n,PM_PTEG_FROM_L3,PTEG loaded from L3
##8308E
PTEG loaded from L3
#187,v,g,n,n,PM_PTEG_FROM_L35_SHR,PTEG loaded from L3.5 shared
##8309E
PTEG loaded from L3.5 shared
#188,v,g,n,n,PM_PTEG_FROM_L375_MOD,PTEG loaded from L3.75 modified
##830A7
PTEG loaded from L3.75 modified
#189,v,g,n,n,PM_PTEG_FROM_RMEM,PTEG loaded from remote memory
##830A1
PTEG loaded from remote memory
#190,v,g,n,n,PM_RUN_CYC,Run cycles
##00005
Processor Cycles gated by the run latch
#191,v,g,n,s,PM_SNOOP_DCLAIM_RETRY_QFULL,Snoop dclaim/flush retry due to write/dclaim queues full
##720E6
Snoop dclaim/flush retry due to write/dclaim queues full
#192,v,g,n,s,PM_SNOOP_PW_RETRY_RQ,Snoop partial-write retry due to collision with active read queue
##707C6
Snoop partial-write retry due to collision with active read queue
#193,v,g,n,s,PM_SNOOP_RD_RETRY_QFULL,Snoop read retry due to read queue full
##700C6
Snoop read retry due to read queue full
#194,v,g,n,s,PM_SNOOP_RD_RETRY_RQ,Snoop read retry due to collision with active read queue
##705C6
Snoop read retry due to collision with active read queue
#195,v,g,n,s,PM_SNOOP_RETRY_1AHEAD,Snoop retry due to one ahead collision
##725E6
Snoop retry due to one ahead collision
#196,u,g,n,s,PM_SNOOP_TLBIE,Snoop TLBIE
##800C3
A TLB miss for a data request occurred. Requests that miss the TLB may be retried until the instruction is in the next to complete group (unless HID4 is set to allow speculative tablewalks). This may result in multiple TLB misses for the same instruction.
#197,v,g,n,s,PM_SNOOP_WR_RETRY_RQ,Snoop write/dclaim retry due to collision with active read queue
##706C6
Snoop write/dclaim retry due to collision with active read queue
#198,v,g,n,n,PM_STCX_FAIL,STCX failed
##820E1
A stcx (stwcx or stdcx) failed
#199,v,g,n,n,PM_STCX_PASS,Stcx passes
##820E5
A stcx (stwcx or stdcx) instruction was successful
#200,v,g,n,n,PM_SUSPENDED,Suspended
##00000
Suspended
#201,u,g,n,n,PM_TB_BIT_TRANS,Time Base bit transition
##00018
When the selected time base bit (as specified in MMCR0[TBSEL])transitions from 0 to 1 
#202,v,g,n,s,PM_THRD_ONE_RUN_CYC,One of the threads in run cycles
##0000B
One of the threads in run cycles
#203,v,g,n,n,PM_THRD_PRIO_1_CYC,Cycles thread running at priority level 1
##420E0
Cycles thread running at priority level 1
#204,v,g,n,n,PM_THRD_PRIO_2_CYC,Cycles thread running at priority level 2
##420E1
Cycles thread running at priority level 2
#205,v,g,n,n,PM_THRD_PRIO_3_CYC,Cycles thread running at priority level 3
##420E2
Cycles thread running at priority level 3
#206,v,g,n,n,PM_THRD_PRIO_4_CYC,Cycles thread running at priority level 4
##420E3
Cycles thread running at priority level 4
#207,v,g,n,n,PM_THRD_PRIO_5_CYC,Cycles thread running at priority level 5
##420E4
Cycles thread running at priority level 5
#208,v,g,n,n,PM_THRD_PRIO_6_CYC,Cycles thread running at priority level 6
##420E5
Cycles thread running at priority level 6
#209,v,g,n,n,PM_THRD_PRIO_7_CYC,Cycles thread running at priority level 7
##420E6
Cycles thread running at priority level 7
#210,v,g,n,n,PM_TLB_MISS,TLB misses
##80088
TLB misses
#211,v,g,n,s,PM_XER_MAP_FULL_CYC,Cycles XER mapper full
##100C2
The ISU sends a signal indicating that the xer mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#212,v,g,n,n,PM_INST_FROM_L2MISS,Instructions fetched missed L2
##2209B
An instruction fetch group was fetched from beyond L2.

$$$$$$$$

{ counter 2 }
#0,v,g,n,n,PM_0INST_CLB_CYC,Cycles no instructions in CLB
##400C0
Cycles no instructions in CLB
#1,v,g,n,n,PM_1INST_CLB_CYC,Cycles 1 instruction in CLB
##400C1
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#2,v,g,n,n,PM_2INST_CLB_CYC,Cycles 2 instructions in CLB
##400C2
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#3,v,g,n,n,PM_3INST_CLB_CYC,Cycles 3 instructions in CLB
##400C3
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#4,v,g,n,n,PM_4INST_CLB_CYC,Cycles 4 instructions in CLB
##400C4
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#5,v,g,n,n,PM_5INST_CLB_CYC,Cycles 5 instructions in CLB
##400C5
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#6,v,g,n,n,PM_6INST_CLB_CYC,Cycles 6 instructions in CLB
##400C6
The cache line buffer (CLB) is an 8-deep, 4-wide instruction buffer. Fullness is indicated in the 8 valid bits associated with each of the 4-wide slots with full(0) correspanding to the number of cycles there are 8 instructions in the queue and full (7) corresponding to the number of cycles there is 1 instruction in the queue. This signal gives a real time history of the number of instruction quads valid in the instruction queue.
#7,u,g,n,s,PM_BRQ_FULL_CYC,Cycles branch queue full
##100C5
The ISU sends a signal indicating that the issue queue that feeds the ifu br unit cannot accept any more group (queue is full of groups).
#8,v,g,n,n,PM_BR_PRED_TA,A conditional branch was predicted, target prediction
##23087
A conditional branch was predicted, target prediction
#9,v,g,n,n,PM_CLB_FULL_CYC,Cycles CLB full
##220E5
Cycles CLB full
#10,v,g,n,n,PM_CMPLU_STALL_DCACHE_MISS,Completion stall caused by D cache miss
##1109A
Completion stall caused by D cache miss
#11,v,g,n,n,PM_CMPLU_STALL_FDIV,Completion stall caused by FDIV or FQRT instruction
##1109B
Completion stall caused by FDIV or FQRT instruction
#12,v,g,n,n,PM_CMPLU_STALL_FXU,Completion stall caused by FXU instruction
##11099
Completion stall caused by FXU instruction
#13,v,g,n,n,PM_CMPLU_STALL_LSU,Completion stall caused by LSU instruction
##11098
Completion stall caused by LSU instruction
#14,v,g,n,s,PM_CR_MAP_FULL_CYC,Cycles CR logical operation mapper full
##100C4
The ISU sends a signal indicating that the cr mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#15,v,g,n,s,PM_CYC,Processor cycles
##0000F
Processor cycles
#16,v,g,n,n,PM_DATA_FROM_L25_MOD,Data loaded from L2.5 modified
##C3097
DL1 was reloaded with modified (M) data from the L2 of a chip on this MCM due to a demand load
#17,v,g,n,n,PM_DATA_FROM_L35_MOD,Data loaded from L3.5 modified
##C309E
Data loaded from L3.5 modified
#18,v,g,n,n,PM_DATA_FROM_LMEM,Data loaded from local memory
##C3087
Data loaded from local memory
#19,v,g,n,n,PM_DATA_TABLEWALK_CYC,Cycles doing data tablewalks
##800C7
This signal is asserted every cycle when a tablewalk is active. While a tablewalk is active any request attempting to access the TLB will be rejected and retried.
#20,v,g,n,n,PM_DSLB_MISS,Data SLB misses
##800C5
A SLB miss for a data request occurred. SLB misses trap to the operating system to resolve
#21,v,g,n,n,PM_DTLB_MISS,Data TLB misses
##800C4
A TLB miss for a data request occurred. Requests that miss the TLB may be retried until the instruction is in the next to complete group (unless HID4 is set to allow speculative tablewalks). This may result in multiple TLB misses for the same instruction.
#22,v,g,n,n,PM_DTLB_MISS_16M,Data TLB miss for 16M page
##C40C4
Data TLB miss for 16M page
#23,v,g,n,n,PM_DTLB_MISS_4K,Data TLB miss for 4K page
##C40C0
Data TLB miss for 4K page
#24,v,g,n,n,PM_DTLB_REF_16M,Data TLB reference for 16M page
##C40C6
Data TLB reference for 16M page
#25,v,g,n,n,PM_DTLB_REF_4K,Data TLB reference for 4K page
##C40C2
Data TLB reference for 4K page
#26,v,g,n,s,PM_FAB_CMD_ISSUED,Fabric command issued
##700C7
Fabric command issued
#27,v,g,n,s,PM_FAB_DCLAIM_ISSUED,dclaim issued
##720E7
dclaim issued
#28,v,g,n,s,PM_FAB_HOLDtoNN_EMPTY,Hold buffer to NN empty
##722E7
Hold buffer to NN empty
#29,v,g,n,s,PM_FAB_HOLDtoVN_EMPTY,Hold buffer to VN empty
##721E7
Hold buffer to VN empty
#30,v,g,n,s,PM_FAB_M1toP1_SIDECAR_EMPTY,M1 to P1 sidecar empty
##702C7
M1 to P1 sidecar empty
#31,v,g,n,s,PM_FAB_P1toM1_SIDECAR_EMPTY,P1 to M1 sidecar empty
##701C7
P1 to M1 sidecar empty
#32,v,g,n,s,PM_FAB_PNtoNN_DIRECT,PN to NN beat went straight to its destination
##703C7
PN to NN beat went straight to its destination
#33,v,g,n,s,PM_FAB_PNtoVN_DIRECT,PN to VN beat went straight to its destination
##723E7
PN to VN beat went straight to its destination
#34,v,g,n,s,PM_FPR_MAP_FULL_CYC,Cycles FPR mapper full
##100C1
The ISU sends a signal indicating that the FPR mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#35,v,g,n,n,PM_FPU0_1FLOP,FPU0 executed add, mult, sub, cmp or sel instruction
##000C3
This signal is active for one cycle when fp0 is executing an add, mult, sub, compare, or fsel kind of instruction. This could be fadd*, fmul*, fsub*, fcmp**, fsel where XYZ* means XYZ, XYZs, XYZ., XYZs. and XYZ** means XYZu, XYZo
#36,v,g,n,n,PM_FPU0_DENORM,FPU0 received denormalized data
##020E0
This signal is active for one cycle when one of the operands is denormalized.
#37,v,g,n,n,PM_FPU0_FDIV,FPU0 executed FDIV instruction
##000C0
This signal is active for one cycle at the end of the microcode executed when fp0 is executing a divide instruction. This could be fdiv, fdivs, fdiv. fdivs.
#38,v,g,n,n,PM_FPU0_FMA,FPU0 executed multiply-add instruction
##000C1
This signal is active for one cycle when fp0 is executing multiply-add kind of instruction. This could be fmadd*, fnmadd*, fmsub*, fnmsub* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#39,v,g,n,n,PM_FPU0_FSQRT,FPU0 executed FSQRT instruction
##000C2
This signal is active for one cycle at the end of the microcode executed when fp0 is executing a square root instruction. This could be fsqrt* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#40,v,g,n,s,PM_FPU0_FULL_CYC,Cycles FPU0 issue queue full
##100C3
The issue queue for FPU unit 0 cannot accept any more instructions. Issue is stopped
#41,v,g,n,n,PM_FPU0_SINGLE,FPU0 executed single precision instruction
##020E3
This signal is active for one cycle when fp0 is executing single precision instruction.
#42,v,g,n,n,PM_FPU0_STALL3,FPU0 stalled in pipe3
##020E1
This signal indicates that fp0 has generated a stall in pipe3 due to overflow, underflow, massive cancel, convert to integer (sometimes), or convert from integer (always). This signal is active during the entire duration of the stall. 
#43,v,g,n,n,PM_FPU0_STF,FPU0 executed store instruction
##020E2
This signal is active for one cycle when fp0 is executing a store instruction.
#44,v,g,n,n,PM_FPU1_1FLOP,FPU1 executed add, mult, sub, cmp or sel instruction
##000C7
This signal is active for one cycle when fp1 is executing an add, mult, sub, compare, or fsel kind of instruction. This could be fadd*, fmul*, fsub*, fcmp**, fsel where XYZ* means XYZ, XYZs, XYZ., XYZs. and XYZ** means XYZu, XYZo
#45,v,g,n,n,PM_FPU1_DENORM,FPU1 received denormalized data
##020E4
This signal is active for one cycle when one of the operands is denormalized.
#46,v,g,n,n,PM_FPU1_FDIV,FPU1 executed FDIV instruction
##000C4
This signal is active for one cycle at the end of the microcode executed when fp1 is executing a divide instruction. This could be fdiv, fdivs, fdiv. fdivs.
#47,v,g,n,n,PM_FPU1_FMA,FPU1 executed multiply-add instruction
##000C5
This signal is active for one cycle when fp1 is executing multiply-add kind of instruction. This could be fmadd*, fnmadd*, fmsub*, fnmsub* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#48,v,g,n,n,PM_FPU1_FSQRT,FPU1 executed FSQRT instruction
##000C6
This signal is active for one cycle at the end of the microcode executed when fp1 is executing a square root instruction. This could be fsqrt* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#49,v,g,n,s,PM_FPU1_FULL_CYC,Cycles FPU1 issue queue full
##100C7
The issue queue for FPU unit 1 cannot accept any more instructions. Issue is stopped
#50,v,g,n,n,PM_FPU1_SINGLE,FPU1 executed single precision instruction
##020E7
This signal is active for one cycle when fp1 is executing single precision instruction.
#51,v,g,n,n,PM_FPU1_STALL3,FPU1 stalled in pipe3
##020E5
This signal indicates that fp1 has generated a stall in pipe3 due to overflow, underflow, massive cancel, convert to integer (sometimes), or convert from integer (always). This signal is active during the entire duration of the stall. 
#52,v,g,n,n,PM_FPU1_STF,FPU1 executed store instruction
##020E6
This signal is active for one cycle when fp1 is executing a store instruction.
#53,v,g,n,n,PM_FPU_FSQRT,FPU executed FSQRT instruction
##00090
This signal is active for one cycle at the end of the microcode executed when FPU is executing a square root instruction. This could be fsqrt* where XYZ* means XYZ, XYZs, XYZ., XYZs. Combined Unit 0 + Unit 1
#54,v,g,n,n,PM_FPU_FMA,FPU executed multiply-add instruction
##00088
This signal is active for one cycle when FPU is executing multiply-add kind of instruction. This could be fmadd*, fnmadd*, fmsub*, fnmsub* where XYZ* means XYZ, XYZs, XYZ., XYZs. Combined Unit 0 + Unit 1
#55,v,g,n,n,PM_FPU_STALL3,FPU stalled in pipe3
##02088
FPU has generated a stall in pipe3 due to overflow, underflow, massive cancel, convert to integer (sometimes), or convert from integer (always). This signal is active during the entire duration of the stall. Combined Unit 0 + Unit 1
#56,v,g,n,n,PM_FPU_STF,FPU executed store instruction
##02090
FPU is executing a store instruction. Combined Unit 0 + Unit 1
#57,u,g,n,n,PM_FXU_BUSY,FXU busy
##00012
FXU0 and FXU1 are both busy
#58,v,g,n,n,PM_FXU_FIN,FXU produced a result
##00014
The fixed point unit (Unit 0 + Unit 1) finished a marked instruction. Instructions that finish may not necessary complete.
#59,v,g,n,n,PM_GCT_NOSLOT_IC_MISS,No slot in GCT caused by I cache miss
##1009C
This thread has no slot in the GCT because of an I cache miss
#60,v,g,n,n,PM_GCT_FULL_CYC,Cycles GCT full
##100C0
The ISU sends a signal indicating the gct is full. 
#61,v,g,n,s,PM_GCT_USAGE_60to79_CYC,Cycles GCT 60-79% full
##0001F
Cycles GCT 60-79% full
#62,v,g,n,n,PM_GRP_BR_REDIR,Group experienced branch redirect
##120E6
Group experienced branch redirect
#63,v,g,n,n,PM_GRP_BR_REDIR_NONSPEC,Group experienced non-speculative branch redirect
##120E5
Group experienced non-speculative branch redirect
#64,v,g,n,n,PM_GRP_DISP,Group dispatches
##00002
A group was dispatched
#65,v,g,n,n,PM_GRP_DISP_REJECT,Group dispatch rejected
##120E4
A group that previously attempted dispatch was rejected.
#66,v,g,n,n,PM_GRP_DISP_VALID,Group dispatch valid
##120E3
Dispatch has been attempted for a valid group.  Some groups may be rejected.  The total number of successful dispatches is the number of dispatch valid minus dispatch reject.
#67,v,g,n,n,PM_GRP_IC_MISS,Group experienced I cache miss
##120E7
Group experienced I cache miss
#68,v,g,n,n,PM_HV_CYC,Hypervisor Cycles
##0000B
Cycles when the processor is executing in Hypervisor (MSR[HV] = 1 and MSR[PR]=0)
#69,v,g,n,n,PM_IC_PREF_REQ,Instruction prefetch requests
##220E6
Asserted when a non-canceled prefetch is made to the cache interface unit (CIU).
#70,v,g,n,n,PM_IERAT_XLATE_WR,Translation written to ierat
##220E7
This signal will be asserted each time the I-ERAT is written. This indicates that an ERAT miss has been serviced. ERAT misses will initiate a sequence resulting in the ERAT being written. ERAT misses that are later ignored will not be counted unless the ERAT is written before the instruction stream is changed, This should be a fairly accurate count of ERAT missed (best available).
#71,v,g,n,n,PM_INST_CMPL,Instructions completed
##00001
Number of Eligible Instructions that completed. 
#72,v,g,n,n,PM_INST_DISP,Instructions dispatched
##120E1
The ISU sends the number of instructions dispatched.
#73,v,g,n,n,PM_INST_FETCH_CYC,Cycles at least 1 instruction fetched
##220E4
Asserted each cycle when the IFU sends at least one instruction to the IDU. 
#74,v,g,n,n,PM_INST_FROM_L1,Instruction fetched from L1
##2208D
An instruction fetch group was fetched from L1. Fetch Groups can contain up to 8 instructions
#75,v,g,n,n,PM_INST_FROM_L25_MOD,Instruction fetched from L2.5 modified
##22096
Instruction fetched from L2.5 modified
#76,v,g,n,n,PM_INST_FROM_L35_MOD,Instruction fetched from L3.5 modified
##2209D
Instruction fetched from L3.5 modified
#77,v,g,n,n,PM_INST_FROM_LMEM,Instruction fetched from local memory
##22086
Instruction fetched from local memory
#78,u,g,n,n,PM_ISLB_MISS,Instruction SLB misses
##800C1
A SLB miss for an instruction fetch as occurred
#79,v,g,n,n,PM_ITLB_MISS,Instruction TLB misses
##800C0
A TLB miss for an Instruction Fetch has occurred
#80,v,g,n,s,PM_L2SA_MOD_TAG,L2 slice A transition from modified to tagged
##720E0
A cache line in the local L2 directory made a state transition from the Modified state to the Tagged state. This transition was caused by a read snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#81,v,g,n,s,PM_L2SA_RCLD_DISP,L2 Slice A RC load dispatch attempt
##701C0
L2 Slice A RC load dispatch attempt
#82,v,g,n,s,PM_L2SA_RCLD_DISP_FAIL_RC_FULL,L2 Slice A RC load dispatch attempt failed due to all RC full
##721E0
L2 Slice A RC load dispatch attempt failed due to all RC full
#83,v,g,n,s,PM_L2SA_RCST_DISP,L2 Slice A RC store dispatch attempt
##702C0
L2 Slice A RC store dispatch attempt
#84,v,g,n,s,PM_L2SA_RCST_DISP_FAIL_RC_FULL,L2 Slice A RC store dispatch attempt failed due to all RC full
##722E0
L2 Slice A RC store dispatch attempt failed due to all RC full
#85,v,g,n,s,PM_L2SA_RC_DISP_FAIL_CO_BUSY,L2 Slice A RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
##703C0
L2 Slice A RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
#86,v,g,n,s,PM_L2SA_SHR_MOD,L2 slice A transition from shared to modified
##700C0
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L , or Tagged) to the Modified state. This transition was caused by a store from either of the two local CPUs to a cache line in any of the Shared states. The event is provided on each of the three slices A,B,and C. 
#87,v,g,n,n,PM_L2SA_ST_REQ,L2 slice A store requests
##723E0
A store request as seen at the L2 directory has been made from the core. Stores are counted after gathering in the L2 store queues. The event is provided on each of the three slices A,B,and C.
#88,v,g,n,s,PM_L2SB_MOD_TAG,L2 slice B transition from modified to tagged
##720E1
A cache line in the local L2 directory made a state transition from the Modified state to the Tagged state. This transition was caused by a read snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#89,v,g,n,s,PM_L2SB_RCLD_DISP,L2 Slice B RC load dispatch attempt
##701C1
L2 Slice B RC load dispatch attempt
#90,v,g,n,s,PM_L2SB_RCLD_DISP_FAIL_RC_FULL,L2 Slice B RC load dispatch attempt failed due to all RC full
##721E1
L2 Slice B RC load dispatch attempt failed due to all RC full
#91,v,g,n,s,PM_L2SB_RCST_DISP,L2 Slice B RC store dispatch attempt
##702C1
L2 Slice B RC store dispatch attempt
#92,v,g,n,s,PM_L2SB_RCST_DISP_FAIL_RC_FULL,L2 Slice B RC store dispatch attempt failed due to all RC full
##722E1
L2 Slice B RC store dispatch attempt failed due to all RC full
#93,v,g,n,s,PM_L2SB_RC_DISP_FAIL_CO_BUSY,L2 Slice B RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
##703C1
L2 Slice B RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
#94,v,g,n,s,PM_L2SB_SHR_MOD,L2 slice B transition from shared to modified
##700C1
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L , or Tagged) to the Modified state. This transition was caused by a store from either of the two local CPUs to a cache line in any of the Shared states. The event is provided on each of the three slices A,B,and C. 
#95,v,g,n,n,PM_L2SB_ST_REQ,L2 slice B store requests
##723E1
A store request as seen at the L2 directory has been made from the core. Stores are counted after gathering in the L2 store queues. The event is provided on each of the three slices A,B,and C.
#96,v,g,n,s,PM_L2SC_MOD_TAG,L2 slice C transition from modified to tagged
##720E2
A cache line in the local L2 directory made a state transition from the Modified state to the Tagged state. This transition was caused by a read snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#97,v,g,n,s,PM_L2SC_RCLD_DISP,L2 Slice C RC load dispatch attempt
##701C2
L2 Slice C RC load dispatch attempt
#98,v,g,n,s,PM_L2SC_RCLD_DISP_FAIL_RC_FULL,L2 Slice C RC load dispatch attempt failed due to all RC full
##721E2
L2 Slice C RC load dispatch attempt failed due to all RC full
#99,v,g,n,s,PM_L2SC_RCST_DISP,L2 Slice C RC store dispatch attempt
##702C2
L2 Slice C RC store dispatch attempt
#100,v,g,n,s,PM_L2SC_RCST_DISP_FAIL_RC_FULL,L2 Slice C RC store dispatch attempt failed due to all RC full
##722E2
L2 Slice C RC store dispatch attempt failed due to all RC full
#101,v,g,n,s,PM_L2SC_RC_DISP_FAIL_CO_BUSY,L2 Slice C RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
##703C2
L2 Slice C RC dispatch attempt failed due to RC/CO pair chosen was miss and CO already busy
#102,v,g,n,s,PM_L2SC_SHR_MOD,L2 slice C transition from shared to modified
##700C2
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L , or Tagged) to the Modified state. This transition was caused by a store from either of the two local CPUs to a cache line in any of the Shared states. The event is provided on each of the three slices A,B,and C. 
#103,v,g,n,n,PM_L2SC_ST_REQ,L2 slice C store requests
##723E2
A store request as seen at the L2 directory has been made from the core. Stores are counted after gathering in the L2 store queues. The event is provided on each of the three slices A,B,and C.
#104,v,g,n,s,PM_L3SA_ALL_BUSY,L3 slice A active for every cycle all CI/CO machines busy
##721E3
L3 slice A active for every cycle all CI/CO machines busy
#105,v,g,n,s,PM_L3SA_MOD_TAG,L3 slice A transition from modified to TAG
##720E3
L3 slice A transition from modified to TAG
#106,v,g,n,s,PM_L3SA_REF,L3 slice A references
##701C3
L3 slice A references
#107,v,g,n,s,PM_L3SB_ALL_BUSY,L3 slice B active for every cycle all CI/CO machines busy
##721E4
L3 slice B active for every cycle all CI/CO machines busy
#108,v,g,n,s,PM_L3SB_MOD_TAG,L3 slice B transition from modified to TAG
##720E4
L3 slice B transition from modified to TAG
#109,v,g,n,s,PM_L3SB_REF,L3 slice B references
##701C4
L3 slice B references
#110,v,g,n,s,PM_L3SC_ALL_BUSY,L3 slice C active for every cycle all CI/CO machines busy
##721E5
L3 slice C active for every cycle all CI/CO machines busy
#111,v,g,n,s,PM_L3SC_MOD_TAG,L3 slice C transition from modified to TAG
##720E5
L3 slice C transition from modified to TAG
#112,v,g,n,s,PM_L3SC_REF,L3 slice C references
##701C5
L3 slice C references
#113,v,g,n,n,PM_LARX_LSU0,Larx executed on LSU0
##820E7
A larx (lwarx or ldarx) was executed on side 0 (there is no coresponding unit 1 event since larx instructions can only execute on unit 0)
#114,u,g,n,s,PM_LR_CTR_MAP_FULL_CYC,Cycles LR/CTR mapper full
##100C6
The ISU sends a signal indicating that the lr/ctr mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#115,v,g,n,n,PM_LSU0_BUSY_REJECT,LSU0 busy due to reject
##C20E3
LSU unit 0 busy due to reject
#116,v,g,n,n,PM_LSU0_DERAT_MISS,LSU0 DERAT misses
##800C2
A data request (load or store) from LSU Unit 0 missed the ERAT and resulted in an ERAT reload. Multiple instructions may miss the ERAT entry for the same 4K page, but only one reload will occur.
#117,v,g,n,n,PM_LSU0_FLUSH_LRQ,LSU0 LRQ flushes
##C00C2
A load was flushed by unit 1 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#118,u,g,n,n,PM_LSU0_FLUSH_SRQ,LSU0 SRQ flushes
##C00C3
A store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#119,v,g,n,n,PM_LSU0_FLUSH_ULD,LSU0 unaligned load flushes
##C00C0
A load was flushed from unit 0 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#120,v,g,n,n,PM_LSU0_FLUSH_UST,LSU0 unaligned store flushes
##C00C1
A store was flushed from unit 0 because it was unaligned (crossed a 4k boundary)
#121,v,g,n,n,PM_LSU0_REJECT_ERAT_MISS,LSU0 reject due to ERAT miss
##C60E3
LSU0 reject due to ERAT miss
#122,v,g,n,n,PM_LSU0_REJECT_LMQ_FULL,LSU0 reject due to LMQ full or missed data coming
##C60E1
LSU0 reject due to LMQ full or missed data coming
#123,v,g,n,n,PM_LSU0_REJECT_RELOAD_CDF,LSU0 reject due to reload CDF or tag update collision
##C60E2
LSU0 reject due to reload CDF or tag update collision
#124,v,g,n,n,PM_LSU0_REJECT_SRQ_LHS,LSU0 SRQ rejects
##C60E0
LSU0 reject due to load hit store
#125,u,g,n,n,PM_LSU0_SRQ_STFWD,LSU0 SRQ store forwarded
##C20E0
Data from a store instruction was forwarded to a load on unit 0
#126,v,g,n,n,PM_LSU1_BUSY_REJECT,LSU1 busy due to reject
##C20E7
LSU unit 1 is busy due to reject
#127,v,g,n,n,PM_LSU1_DERAT_MISS,LSU1 DERAT misses
##800C6
A data request (load or store) from LSU Unit 1 missed the ERAT and resulted in an ERAT reload. Multiple instructions may miss the ERAT entry for the same 4K page, but only one reload will occur.
#128,v,g,n,n,PM_LSU1_FLUSH_LRQ,LSU1 LRQ flushes
##C00C6
A load was flushed by unit 1 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#129,u,g,n,n,PM_LSU1_FLUSH_SRQ,LSU1 SRQ flushes
##C00C7
A store was flushed because younger load hits and older store that is already in the SRQ or in the same group. 
#130,v,g,n,n,PM_LSU1_FLUSH_ULD,LSU1 unaligned load flushes
##C00C4
A load was flushed from unit 1 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#131,u,g,n,n,PM_LSU1_FLUSH_UST,LSU1 unaligned store flushes
##C00C5
A store was flushed from unit 1 because it was unaligned (crossed a 4k boundary)
#132,v,g,n,n,PM_LSU1_REJECT_ERAT_MISS,LSU1 reject due to ERAT miss
##C60E7
LSU1 reject due to ERAT miss
#133,v,g,n,n,PM_LSU1_REJECT_LMQ_FULL,LSU1 reject due to LMQ full or missed data coming
##C60E5
LSU1 reject due to LMQ full or missed data coming
#134,v,g,n,n,PM_LSU1_REJECT_RELOAD_CDF,LSU1 reject due to reload CDF or tag update collision
##C60E6
LSU1 reject due to reload CDF or tag update collision
#135,v,g,n,n,PM_LSU1_REJECT_SRQ_LHS,LSU1 SRQ rejects
##C60E4
LSU1 reject due to load hit store
#136,u,g,n,n,PM_LSU1_SRQ_STFWD,LSU1 SRQ store forwarded
##C20E4
Data from a store instruction was forwarded to a load on unit 1
#137,v,g,n,n,PM_LSU_DERAT_MISS,DERAT misses
##80090
Total D-ERAT Misses (Unit 0 + Unit 1). Requests that miss the Derat are rejected and retried until the request hits in the Erat. This may result in multiple erat misses for the same instruction.
#138,v,g,n,n,PM_LSU_FLUSH_LRQ,LRQ flushes
##C0090
A load was flushed because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#139,v,g,n,s,PM_LSU_FLUSH_LRQ_FULL,Flush caused by LRQ full
##320E7
Flush caused by LRQ full
#140,v,g,n,n,PM_LSU_FLUSH_UST,SRQ unaligned store flushes
##C0088
A store was flushed because it was unaligned
#141,u,g,n,n,PM_LSU_LMQ_SRQ_EMPTY_CYC,Cycles LMQ and SRQ empty
##00015
Cycles when both the LMQ and SRQ are empty (LSU is idle)
#142,v,g,n,n,PM_LSU_LRQ_S0_ALLOC,LRQ slot 0 allocated
##C20E6
LRQ slot zero was allocated
#143,v,g,n,n,PM_LSU_LRQ_S0_VALID,LRQ slot 0 valid
##C20E2
This signal is asserted every cycle that the Load Request Queue slot zero is valid. The SRQ is 32 entries long and is allocated round-robin.
#144,v,g,n,n,PM_LSU_REJECT_LMQ_FULL,LSU reject due to LMQ full or missed data coming
##C6088
LSU reject due to LMQ full or missed data coming
#145,v,g,n,n,PM_LSU_REJECT_RELOAD_CDF,LSU reject due to reload CDF or tag update collision
##C6090
LSU reject due to reload CDF or tag update collision
#146,v,g,n,n,PM_LSU_SRQ_S0_ALLOC,SRQ slot 0 allocated
##C20E5
SRQ Slot zero was allocated
#147,v,g,n,n,PM_LSU_SRQ_S0_VALID,SRQ slot 0 valid
##C20E1
This signal is asserted every cycle that the Store Request Queue slot zero is valid. The SRQ is 32 entries long and is allocated round-robin.
#148,v,g,n,s,PM_MEM_FAST_PATH_RD_CMPL,Fast path memory read completed
##722E6
Fast path memory read completed
#149,v,g,n,s,PM_MEM_HI_PRIO_PW_CMPL,High priority partial-write completed
##727E6
High priority partial-write completed
#150,v,g,n,s,PM_MEM_HI_PRIO_WR_CMPL,High priority write completed
##726E6
High priority write completed
#151,v,g,n,s,PM_MEM_PWQ_DISP,Memory partial-write queue dispatched
##704C6
Memory partial-write queue dispatched
#152,v,g,n,s,PM_MEM_PWQ_DISP_BUSY2or3,Memory partial-write queue dispatched with 2-3 queues busy
##724E6
Memory partial-write queue dispatched with 2-3 queues busy
#153,v,g,n,s,PM_MEM_READ_CMPL,Memory read completed or canceled
##702C6
Memory read completed or canceled
#154,v,g,n,s,PM_MEM_RQ_DISP,Memory read queue dispatched
##701C6
Memory read queue dispatched
#155,v,g,n,s,PM_MEM_RQ_DISP_BUSY8to15,Memory read queue dispatched with 8-15 queues busy
##721E6
Memory read queue dispatched with 8-15 queues busy
#156,v,g,n,s,PM_MEM_WQ_DISP_BUSY1to7,Memory write queue dispatched with 1-7 queues busy
##723E6
Memory write queue dispatched with 1-7 queues busy
#157,v,g,n,s,PM_MEM_WQ_DISP_WRITE,Memory write queue dispatched due to write
##703C6
Memory write queue dispatched due to write
#158,v,g,n,n,PM_MRK_BRU_FIN,Marked instruction BRU processing finished
##00005
The branch unit finished a marked instruction. Instructions that finish may not necessary complete
#159,v,g,n,n,PM_MRK_DATA_FROM_L25_MOD,Marked data loaded from L2.5 modified
##C7097
DL1 was reloaded with modified (M) data from the L2 of a chip on this MCM due to a marked demand load
#160,v,g,n,n,PM_MRK_DATA_FROM_L25_SHR_CYC,Marked load latency from L2.5 shared
##C70A2
Marked load latency from L2.5 shared
#161,v,g,n,n,PM_MRK_DATA_FROM_L275_SHR_CYC,Marked load latency from L2.75 shared
##C70A3
Marked load latency from L2.75 shared
#162,v,g,n,n,PM_MRK_DATA_FROM_L2_CYC,Marked load latency from L2
##C70A0
Marked load latency from L2
#163,v,g,n,n,PM_MRK_DATA_FROM_L35_MOD,Marked data loaded from L3.5 modified
##C709E
Marked data loaded from L3.5 modified
#164,v,g,n,n,PM_MRK_DATA_FROM_L35_SHR_CYC,Marked load latency from L3.5 shared
##C70A6
Marked load latency from L3.5 shared
#165,v,g,n,n,PM_MRK_DATA_FROM_L375_SHR_CYC,Marked load latency from L3.75 shared
##C70A7
Marked load latency from L3.75 shared
#166,v,g,n,n,PM_MRK_DATA_FROM_L3_CYC,Marked load latency from L3
##C70A4
Marked load latency from L3
#167,v,g,n,n,PM_MRK_DATA_FROM_LMEM,Marked data loaded from local memory
##C7087
Marked data loaded from local memory
#168,v,g,n,n,PM_MRK_DTLB_MISS_16M,Marked Data TLB misses for 16M page
##C40C5
Marked Data TLB misses for 16M page
#169,v,g,n,n,PM_MRK_DTLB_MISS_4K,Marked Data TLB misses for 4K page
##C40C1
Marked Data TLB misses for 4K page
#170,v,g,n,n,PM_MRK_DTLB_REF_16M,Marked Data TLB reference for 16M page
##C40C7
Marked Data TLB reference for 16M page
#171,v,g,n,n,PM_MRK_DTLB_REF_4K,Marked Data TLB reference for 4K page
##C40C3
Marked Data TLB reference for 4K page
#172,v,g,n,n,PM_MRK_GRP_BR_REDIR,Group experienced marked branch redirect
##12091
Group experienced marked branch redirect
#173,v,g,n,n,PM_MRK_IMR_RELOAD,Marked IMR reloaded
##820E2
A DL1 reload occured due to marked load
#174,v,g,n,n,PM_INST_CMPL,Instructions completed
##00009
Number of PPC instructions completed. 
#175,v,g,n,n,PM_MRK_LD_MISS_L1_LSU0,LSU0 L1 D cache load misses
##820E0
A marked load, executing on unit 0, missed the dcache
#176,v,g,n,n,PM_MRK_LD_MISS_L1_LSU1,LSU1 L1 D cache load misses
##820E4
A marked load, executing on unit 1, missed the dcache
#177,v,g,n,n,PM_MRK_STCX_FAIL,Marked STCX failed
##820E6
A marked stcx (stwcx or stdcx) failed
#178,v,g,n,n,PM_MRK_ST_GPS,Marked store sent to GPS
##00003
A sampled store has been sent to the memory subsystem
#179,v,g,n,n,PM_MRK_ST_MISS_L1,Marked L1 D cache store misses
##820E3
A marked store missed the dcache
#180,v,g,n,n,PM_PMC1_OVERFLOW,PMC1 Overflow
##0000A
PMC1 Overflow
#181,v,g,n,n,PM_PTEG_FROM_L25_MOD,PTEG loaded from L2.5 modified
##83097
PTEG loaded from L2.5 modified
#182,v,g,n,n,PM_PTEG_FROM_L35_MOD,PTEG loaded from L3.5 modified
##8309E
PTEG loaded from L3.5 modified
#183,v,g,n,n,PM_PTEG_FROM_LMEM,PTEG loaded from local memory
##83087
PTEG loaded from local memory
#184,v,g,n,n,PM_SLB_MISS,SLB misses
##80088
SLB misses
#185,v,g,n,s,PM_SNOOP_DCLAIM_RETRY_QFULL,Snoop dclaim/flush retry due to write/dclaim queues full
##720E6
Snoop dclaim/flush retry due to write/dclaim queues full
#186,v,g,n,s,PM_SNOOP_PW_RETRY_RQ,Snoop partial-write retry due to collision with active read queue
##707C6
Snoop partial-write retry due to collision with active read queue
#187,v,g,n,s,PM_SNOOP_RD_RETRY_QFULL,Snoop read retry due to read queue full
##700C6
Snoop read retry due to read queue full
#188,v,g,n,s,PM_SNOOP_RD_RETRY_RQ,Snoop read retry due to collision with active read queue
##705C6
Snoop read retry due to collision with active read queue
#189,v,g,n,s,PM_SNOOP_RETRY_1AHEAD,Snoop retry due to one ahead collision
##725E6
Snoop retry due to one ahead collision
#190,u,g,n,s,PM_SNOOP_TLBIE,Snoop TLBIE
##800C3
A TLB miss for a data request occurred. Requests that miss the TLB may be retried until the instruction is in the next to complete group (unless HID4 is set to allow speculative tablewalks). This may result in multiple TLB misses for the same instruction.
#191,v,g,n,s,PM_SNOOP_WR_RETRY_RQ,Snoop write/dclaim retry due to collision with active read queue
##706C6
Snoop write/dclaim retry due to collision with active read queue
#192,v,g,n,n,PM_STCX_FAIL,STCX failed
##820E1
A stcx (stwcx or stdcx) failed
#193,v,g,n,n,PM_STCX_PASS,Stcx passes
##820E5
A stcx (stwcx or stdcx) instruction was successful
#194,v,g,n,n,PM_SUSPENDED,Suspended
##00000
Suspended
#195,v,g,n,s,PM_GCT_EMPTY_CYC,Cycles GCT empty
##00004
The Global Completion Table is completely empty
#196,v,g,n,n,PM_THRD_GRP_CMPL_BOTH_CYC,Cycles group completed by both threads
##00013
Cycles group completed by both threads
#197,v,g,n,n,PM_THRD_PRIO_1_CYC,Cycles thread running at priority level 1
##420E0
Cycles thread running at priority level 1
#198,v,g,n,n,PM_THRD_PRIO_2_CYC,Cycles thread running at priority level 2
##420E1
Cycles thread running at priority level 2
#199,v,g,n,n,PM_THRD_PRIO_3_CYC,Cycles thread running at priority level 3
##420E2
Cycles thread running at priority level 3
#200,v,g,n,n,PM_THRD_PRIO_4_CYC,Cycles thread running at priority level 4
##420E3
Cycles thread running at priority level 4
#201,v,g,n,n,PM_THRD_PRIO_5_CYC,Cycles thread running at priority level 5
##420E4
Cycles thread running at priority level 5
#202,v,g,n,n,PM_THRD_PRIO_6_CYC,Cycles thread running at priority level 6
##420E5
Cycles thread running at priority level 6
#203,v,g,n,n,PM_THRD_PRIO_7_CYC,Cycles thread running at priority level 7
##420E6
Cycles thread running at priority level 7
#204,v,g,n,s,PM_XER_MAP_FULL_CYC,Cycles XER mapper full
##100C2
The ISU sends a signal indicating that the xer mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.

$$$$$$$$

{ counter 3 }
#0,v,g,n,n,PM_BR_ISSUED,Branches issued
##230E4
This signal will be asserted each time the ISU issues a branch instruction. This signal will be asserted each time the ISU selects a branch instruction to issue.
#1,v,g,n,n,PM_BR_MPRED_CR,Branch mispredictions due to CR bit setting
##230E5
This signal is asserted when the branch execution unit detects a branch mispredict because the CR value is opposite of the predicted value. This signal is asserted after a branch issue event and will result in a branch redirect flush if not overridden by a flush of an older instruction.
#2,v,g,n,n,PM_BR_MPRED_TA,Branch mispredictions due to target address
##230E6
branch miss predict due to a target address prediction. This signal will be asserted each time the branch execution unit detects an incorrect target address prediction. This signal will be asserted after a valid branch execution unit issue and will cause a branch mispredict flush unless a flush is detected from an older instruction.
#3,v,g,n,n,PM_BR_PRED_CR,A conditional branch was predicted, CR prediction
##23087,230E2
A conditional branch was predicted, CR prediction
#4,v,g,n,n,PM_BR_PRED_TA,A conditional branch was predicted, target prediction
##230E3
A conditional branch was predicted, target prediction
#5,u,g,n,s,PM_CRQ_FULL_CYC,Cycles CR issue queue full
##110C1
The ISU sends a signal indicating that the issue queue that feeds the ifu cr unit cannot accept any more group (queue is full of groups).
#6,v,g,n,s,PM_CYC,Processor cycles
##0000F
Processor cycles
#7,v,g,n,n,PM_DATA_FROM_L25_MOD,Data loaded from L2.5 modified
##C30A2
DL1 was reloaded with modified (M) data from the L2 of a chip on this MCM due to a demand load
#8,v,g,n,n,PM_DATA_FROM_L275_SHR,Data loaded from L2.75 shared
##C3097
DL1 was reloaded with shared (T) data from the L2 of another MCM due to a demand load
#9,v,g,n,n,PM_DATA_FROM_L35_MOD,Data loaded from L3.5 modified
##C30A6
Data loaded from L3.5 modified
#10,v,g,n,n,PM_DATA_FROM_L375_SHR,Data loaded from L3.75 shared
##C309E
Data loaded from L3.75 shared
#11,v,g,n,n,PM_DATA_FROM_LMEM,Data loaded from local memory
##C30A0
Data loaded from local memory
#12,u,g,n,s,PM_DC_INV_L2,L1 D cache entries invalidated from L2
##C10C7
A dcache invalidated was received from the L2 because a line in L2 was castout.
#13,v,g,n,n,PM_DC_PREF_DST,DST (Data Stream Touch) stream start
##830E6
DST (Data Stream Touch) stream start
#14,v,g,n,n,PM_DC_PREF_STREAM_ALLOC,D cache new prefetch stream allocated
##830E7
A new Prefetch Stream was allocated
#15,v,g,n,n,PM_EE_OFF,Cycles MSR(EE) bit off
##130E3
The number of Cycles MSR(EE) bit was off.
#16,u,g,n,n,PM_EE_OFF_EXT_INT,Cycles MSR(EE) bit off and external interrupt pending
##130E7
Cycles MSR(EE) bit off and external interrupt pending
#17,v,g,n,n,PM_FAB_CMD_RETRIED,Fabric command retried
##710C7
Fabric command retried
#18,v,g,n,s,PM_FAB_DCLAIM_RETRIED,dclaim retried
##730E7
dclaim retried
#19,v,g,n,s,PM_FAB_M1toVNorNN_SIDECAR_EMPTY,M1 to VN/NN sidecar empty
##712C7
M1 to VN/NN sidecar empty
#20,v,g,n,s,PM_FAB_P1toVNorNN_SIDECAR_EMPTY,P1 to VN/NN sidecar empty
##711C7
P1 to VN/NN sidecar empty
#21,v,g,n,s,PM_FAB_PNtoNN_SIDECAR,PN to NN beat went to sidecar first
##713C7
PN to NN beat went to sidecar first
#22,v,g,n,s,PM_FAB_PNtoVN_SIDECAR,PN to VN beat went to sidecar first
##733E7
PN to VN beat went to sidecar first
#23,v,g,n,s,PM_FAB_VBYPASS_EMPTY,Vertical bypass buffer empty
##731E7
Vertical bypass buffer empty
#24,v,g,n,n,PM_FLUSH_BR_MPRED,Flush caused by branch mispredict
##110C6
Flush caused by branch mispredict
#25,v,g,n,s,PM_FLUSH_IMBAL,Flush caused by thread GCT imbalance
##330E3
Flush caused by thread GCT imbalance
#26,v,g,n,n,PM_FLUSH,Flushes
##110C7
Flushes
#27,v,g,n,s,PM_FLUSH_SB,Flush caused by scoreboard operation
##330E2
Flush caused by scoreboard operation
#28,v,g,n,s,PM_FLUSH_SYNC,Flush caused by sync
##330E1
Flush caused by sync
#29,v,g,n,n,PM_FPU0_FEST,FPU0 executed FEST instruction
##010C2
This signal is active for one cycle when fp0 is executing one of the estimate instructions. This could be fres* or frsqrte* where XYZ* means XYZ or XYZ. 
#30,v,g,n,n,PM_FPU0_FIN,FPU0 produced a result
##010C3
fp0 finished, produced a result This only indicates finish, not completion. 
#31,v,g,n,n,PM_FPU0_FMOV_FEST,FPU0 executed FMOV or FEST instructions
##010C0
This signal is active for one cycle when fp0 is executing a move kind of instruction or one of the estimate instructions.. This could be fmr*, fneg*, fabs*, fnabs* , fres* or frsqrte* where XYZ* means XYZ or XYZ
#32,v,g,n,n,PM_FPU0_FPSCR,FPU0 executed FPSCR instruction
##030E0
This signal is active for one cycle when fp0 is executing fpscr move related instruction. This could be mtfsfi*, mtfsb0*, mtfsb1*. mffs*, mtfsf*, mcrsf* where XYZ* means XYZ, XYZs, XYZ., XYZs
#33,v,g,n,n,PM_FPU0_FRSP_FCONV,FPU0 executed FRSP or FCONV instructions
##010C1
This signal is active for one cycle when fp0 is executing frsp or convert kind of instruction. This could be frsp*, fcfid*, fcti* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#34,v,g,n,n,PM_FPU1_FEST,FPU1 executed FEST instruction
##010C6
This signal is active for one cycle when fp1 is executing one of the estimate instructions. This could be fres* or frsqrte* where XYZ* means XYZ or XYZ. 
#35,v,g,n,n,PM_FPU1_FIN,FPU1 produced a result
##010C7
fp1 finished, produced a result. This only indicates finish, not completion. 
#36,v,g,n,n,PM_FPU1_FMOV_FEST,FPU1 executing FMOV or FEST instructions
##010C4
This signal is active for one cycle when fp1 is executing a move kind of instruction or one of the estimate instructions.. This could be fmr*, fneg*, fabs*, fnabs* , fres* or frsqrte* where XYZ* means XYZ or XYZ
#37,v,g,n,n,PM_FPU1_FRSP_FCONV,FPU1 executed FRSP or FCONV instructions
##010C5
This signal is active for one cycle when fp1 is executing frsp or convert kind of instruction. This could be frsp*, fcfid*, fcti* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#38,v,g,n,n,PM_FPU_FMOV_FEST,FPU executing FMOV or FEST instructions
##01088
This signal is active for one cycle when executing a move kind of instruction or one of the estimate instructions.. This could be fmr*, fneg*, fabs*, fnabs* , fres* or frsqrte* where XYZ* means XYZ or XYZ . Combined Unit 0 + Unit 1
#39,v,g,n,n,PM_FPU_FRSP_FCONV,FPU executed FRSP or FCONV instructions
##01090
This signal is active for one cycle when executing frsp or convert kind of instruction. This could be frsp*, fcfid*, fcti* where XYZ* means XYZ, XYZs, XYZ., XYZs. Combined Unit 0 + Unit 1
#40,v,g,n,s,PM_FXLS0_FULL_CYC,Cycles FXU0/LS0 queue full
##110C0
The issue queue for FXU/LSU unit 0 cannot accept any more instructions. Issue is stopped
#41,v,g,n,s,PM_FXLS1_FULL_CYC,Cycles FXU1/LS1 queue full
##110C4
The issue queue for FXU/LSU unit 0 cannot accept any more instructions. Issue is stopped
#42,u,g,n,n,PM_FXU0_BUSY_FXU1_IDLE,FXU0 busy FXU1 idle
##00012
FXU0 is busy while FXU1 was idle
#43,v,g,n,n,PM_FXU0_FIN,FXU0 produced a result
##130E2
The Fixed Point unit 0 finished an instruction and produced a result
#44,v,g,n,n,PM_FXU1_FIN,FXU1 produced a result
##130E6
The Fixed Point unit 1 finished an instruction and produced a result
#45,v,g,n,n,PM_FXU_FIN,FXU produced a result
##13088
The fixed point unit (Unit 0 + Unit 1) finished a marked instruction. Instructions that finish may not necessary complete.
#46,v,g,n,n,PM_GCT_NOSLOT_SRQ_FULL,No slot in GCT caused by SRQ full
##10084
This thread has no slot in the GCT because the SRQ is full
#47,v,g,n,s,PM_GCT_USAGE_80to99_CYC,Cycles GCT 80-99% full
##0001F
Cycles GCT 80-99% full
#48,v,g,n,s,PM_GPR_MAP_FULL_CYC,Cycles GPR mapper full
##130E5
The ISU sends a signal indicating that the gpr mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#49,v,g,n,n,PM_GRP_CMPL,Group completed
##00013
A group completed. Microcoded instructions that span multiple groups will generate this event once per group.
#50,v,g,n,n,PM_GRP_DISP_BLK_SB_CYC,Cycles group dispatch blocked by scoreboard
##130E1
The ISU sends a signal indicating that dispatch is blocked by scoreboard.
#51,v,g,n,n,PM_GRP_DISP_SUCCESS,Group dispatch success
##00002
Number of groups sucessfully dispatched (not rejected)
#52,v,g,n,n,PM_IC_DEMAND_L2_BHT_REDIRECT,L2 I cache demand request due to BHT redirect
##230E0
L2 I cache demand request due to BHT redirect
#53,v,g,n,n,PM_IC_DEMAND_L2_BR_REDIRECT,L2 I cache demand request due to branch redirect
##230E1
L2 I cache demand request due to branch redirect
#54,v,g,n,n,PM_IC_PREF_INSTALL,Instruction prefetched installed in prefetch
##210C7
New line coming into the prefetch buffer
#55,v,g,n,n,PM_INST_CMPL,Instructions completed
##00001
Number of Eligible Instructions that completed. 
#56,v,g,n,n,PM_INST_DISP,Instructions dispatched
##00009
The ISU sends the number of instructions dispatched.
#57,v,g,n,n,PM_INST_FROM_L275_SHR,Instruction fetched from L2.75 shared
##22096
Instruction fetched from L2.75 shared
#58,v,g,n,n,PM_INST_FROM_L375_SHR,Instruction fetched from L3.75 shared
##2209D
Instruction fetched from L3.75 shared
#59,v,g,n,n,PM_INST_FROM_PREF,Instructions fetched from prefetch
##2208D
An instruction fetch group was fetched from the prefetch buffer. Fetch Groups can contain up to 8 instructions
#60,v,g,n,n,PM_L1_DCACHE_RELOAD_VALID,L1 reload data source valid
##C30E4
The data source information is valid
#61,v,g,n,n,PM_L1_PREF,L1 cache data prefetches
##C70E7
A request to prefetch data into the L1 was made
#62,v,g,n,n,PM_L1_WRITE_CYC,Cycles writing to instruction L1
##230E7
This signal is asserted each cycle a cache write is active.
#63,v,g,n,s,PM_L2SA_MOD_INV,L2 slice A transition from modified to invalid
##730E0
A cache line in the local L2 directory made a state transition from the Modified state to the Invalid state. This transition was caused by any RWITM snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#64,v,g,n,s,PM_L2SA_RCLD_DISP_FAIL_ADDR,L2 Slice A RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
##711C0
L2 Slice A RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
#65,v,g,n,s,PM_L2SA_RCLD_DISP_FAIL_OTHER,L2 Slice A RC load dispatch attempt failed due to other reasons
##731E0
L2 Slice A RC load dispatch attempt failed due to other reasons
#66,v,g,n,s,PM_L2SA_RCST_DISP_FAIL_ADDR,L2 Slice A RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
##712C0
L2 Slice A RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
#67,v,g,n,s,PM_L2SA_RCST_DISP_FAIL_OTHER,L2 Slice A RC store dispatch attempt failed due to other reasons
##732E0
L2 Slice A RC store dispatch attempt failed due to other reasons
#68,v,g,n,s,PM_L2SA_RC_DISP_FAIL_CO_BUSY_ALL,L2 Slice A RC dispatch attempt failed due to all CO busy
##713C0
L2 Slice A RC dispatch attempt failed due to all CO busy
#69,v,g,n,s,PM_L2SA_SHR_INV,L2 slice A transition from shared to invalid
##710C0
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L, or Tagged) to the Invalid state. This transition was caused by any external snoop request. The event is provided on each of the three slices A,B,and C. NOTE: For this event to be useful the tablewalk duration event should also be counted.
#70,v,g,n,n,PM_L2SA_ST_HIT,L2 slice A store hits
##733E0
A store request made from the core hit in the L2 directory.  This event is provided on each of the three L2 slices A,B, and C.
#71,v,g,n,s,PM_L2SB_MOD_INV,L2 slice B transition from modified to invalid
##730E1
A cache line in the local L2 directory made a state transition from the Modified state to the Invalid state. This transition was caused by any RWITM snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#72,v,g,n,s,PM_L2SB_RCLD_DISP_FAIL_ADDR,L2 Slice B RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
##711C1
L2 Slice B RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
#73,v,g,n,s,PM_L2SB_RCLD_DISP_FAIL_OTHER,L2 Slice B RC load dispatch attempt failed due to other reasons
##731E1
L2 Slice B RC load dispatch attempt failed due to other reasons
#74,v,g,n,s,PM_L2SB_RCST_DISP_FAIL_ADDR,L2 Slice B RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
##712C1
L2 Slice B RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
#75,v,g,n,s,PM_L2SB_RCST_DISP_FAIL_OTHER,L2 Slice B RC store dispatch attempt failed due to other reasons
##732E1
L2 Slice B RC store dispatch attempt failed due to other reasons
#76,v,g,n,s,PM_L2SB_RC_DISP_FAIL_CO_BUSY_ALL,L2 Slice B RC dispatch attempt failed due to all CO busy
##713C1
L2 Slice B RC dispatch attempt failed due to all CO busy
#77,v,g,n,s,PM_L2SB_SHR_INV,L2 slice B transition from shared to invalid
##710C1
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L, or Tagged) to the Invalid state. This transition was caused by any external snoop request. The event is provided on each of the three slices A,B,and C. NOTE: For this event to be useful the tablewalk duration event should also be counted.
#78,v,g,n,n,PM_L2SB_ST_HIT,L2 slice B store hits
##733E1
A store request made from the core hit in the L2 directory.  This event is provided on each of the three L2 slices A,B, and C.
#79,v,g,n,s,PM_L2SC_MOD_INV,L2 slice C transition from modified to invalid
##730E2
A cache line in the local L2 directory made a state transition from the Modified state to the Invalid state. This transition was caused by any RWITM snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#80,v,g,n,s,PM_L2SC_RCLD_DISP_FAIL_ADDR,L2 Slice C RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
##711C2
L2 Slice C RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
#81,v,g,n,s,PM_L2SC_RCLD_DISP_FAIL_OTHER,L2 Slice C RC load dispatch attempt failed due to other reasons
##731E2
L2 Slice C RC load dispatch attempt failed due to other reasons
#82,v,g,n,s,PM_L2SC_RCST_DISP_FAIL_ADDR,L2 Slice C RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
##712C2
L2 Slice C RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
#83,v,g,n,s,PM_L2SC_RCST_DISP_FAIL_OTHER,L2 Slice C RC store dispatch attempt failed due to other reasons
##732E2
L2 Slice C RC store dispatch attempt failed due to other reasons
#84,v,g,n,s,PM_L2SC_RC_DISP_FAIL_CO_BUSY_ALL,L2 Slice C RC dispatch attempt failed due to all CO busy
##713C2
L2 Slice C RC dispatch attempt failed due to all CO busy
#85,v,g,n,s,PM_L2SC_SHR_INV,L2 slice C transition from shared to invalid
##710C2
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L, or Tagged) to the Invalid state. This transition was caused by any external snoop request. The event is provided on each of the three slices A,B,and C. NOTE: For this event to be useful the tablewalk duration event should also be counted.
#86,v,g,n,n,PM_L2SC_ST_HIT,L2 slice C store hits
##733E2
L2 slice C store hits
#87,v,g,n,n,PM_L2_PREF,L2 cache prefetches
##C50C3
A request to prefetch data into L2 was made
#88,v,g,n,s,PM_L3SA_HIT,L3 slice A hits
##711C3
L3 slice A hits
#89,v,g,n,s,PM_L3SA_MOD_INV,L3 slice A transition from modified to invalid
##730E3
L3 slice A transition from modified to invalid
#90,v,g,n,s,PM_L3SA_SHR_INV,L3 slice A transition from shared to invalid
##710C3
L3 slice A transition from shared to invalid
#91,v,g,n,s,PM_L3SA_SNOOP_RETRY,L3 slice A snoop retries
##731E3
L3 slice A snoop retries
#92,v,g,n,s,PM_L3SB_HIT,L3 slice B hits
##711C4
L3 slice B hits
#93,v,g,n,s,PM_L3SB_MOD_INV,L3 slice B transition from modified to invalid
##730E4
L3 slice B transition from modified to invalid
#94,v,g,n,s,PM_L3SB_SHR_INV,L3 slice B transition from shared to invalid
##710C4
L3 slice B transition from shared to invalid
#95,v,g,n,s,PM_L3SB_SNOOP_RETRY,L3 slice B snoop retries
##731E4
L3 slice B snoop retries
#96,v,g,n,s,PM_L3SC_HIT,L3 Slice C hits
##711C5
L3 Slice C hits
#97,v,g,n,s,PM_L3SC_MOD_INV,L3 slice C transition from modified to invalid
##730E5
L3 slice C transition from modified to invalid
#98,v,g,n,s,PM_L3SC_SHR_INV,L3 slice C transition from shared to invalid
##710C5
L3 slice C transition from shared to invalid
#99,v,g,n,s,PM_L3SC_SNOOP_RETRY,L3 slice C snoop retries
##731E5
L3 slice C snoop retries
#100,v,g,n,n,PM_LD_MISS_L1,L1 D cache load misses
##C1088
Total DL1 Load references that miss the DL1
#101,v,g,n,n,PM_LD_MISS_L1_LSU0,LSU0 L1 D cache load misses
##C10C2
A load, executing on unit 0, missed the dcache
#102,v,g,n,n,PM_LD_MISS_L1_LSU1,LSU1 L1 D cache load misses
##C10C6
A load, executing on unit 1, missed the dcache
#103,v,g,n,n,PM_LD_REF_L1_LSU0,LSU0 L1 D cache load references
##C10C0
A load executed on unit 0
#104,v,g,n,n,PM_LD_REF_L1_LSU1,LSU1 L1 D cache load references
##C10C4
A load executed on unit 1
#105,v,g,n,n,PM_LSU0_LDF,LSU0 executed Floating Point load instruction
##C50C0
A floating point load was executed from LSU unit 0
#106,v,g,n,n,PM_LSU0_NCLD,LSU0 non-cacheable loads
##C50C1
LSU0 non-cacheable loads
#107,v,g,n,n,PM_LSU1_LDF,LSU1 executed Floating Point load instruction
##C50C4
A floating point load was executed from LSU unit 1
#108,v,g,n,n,PM_LSU1_NCLD,LSU1 non-cacheable loads
##C50C5
LSU1 non-cacheable loads
#109,v,g,n,n,PM_LSU_FLUSH,Flush initiated by LSU
##110C5
Flush initiated by LSU
#110,v,g,n,s,PM_LSU_FLUSH_SRQ_FULL,Flush caused by SRQ full
##330E0
Flush caused by SRQ full
#111,u,g,n,s,PM_LSU_LMQ_FULL_CYC,Cycles LMQ full
##C30E7
The LMQ was full
#112,v,g,n,n,PM_LSU_LMQ_LHR_MERGE,LMQ LHR merges
##C70E5
A dcache miss occured for the same real cache line address as an earlier request already in the Load Miss Queue and was merged into the LMQ entry.
#113,v,g,n,s,PM_LSU_LMQ_S0_ALLOC,LMQ slot 0 allocated
##C30E6
The first entry in the LMQ was allocated.
#114,v,g,n,n,PM_LSU_LMQ_S0_VALID,LMQ slot 0 valid
##C30E5
This signal is asserted every cycle when the first entry in the LMQ is valid. The LMQ had eight entries that are allocated FIFO
#115,u,g,n,n,PM_LSU_LMQ_SRQ_EMPTY_CYC,Cycles LMQ and SRQ empty
##00015
Cycles when both the LMQ and SRQ are empty (LSU is idle)
#116,v,g,n,s,PM_LSU_LRQ_FULL_CYC,Cycles LRQ full
##110C2
The ISU sends this signal when the LRQ is full.
#117,u,g,n,n,PM_DC_PREF_STREAM_ALLOC_BLK,D cache out of prefech streams
##C50C2
D cache out of prefech streams
#118,v,g,n,s,PM_LSU_SRQ_FULL_CYC,Cycles SRQ full
##110C3
The ISU sends this signal when the srq is full.
#119,u,g,n,n,PM_LSU_SRQ_SYNC_CYC,SRQ sync duration
##830E5
This signal is asserted every cycle when a sync is in the SRQ.
#120,v,g,n,n,PM_LWSYNC_HELD,LWSYNC held at dispatch
##130E0
LWSYNC held at dispatch
#121,v,g,n,s,PM_MEM_LO_PRIO_PW_CMPL,Low priority partial-write completed
##737E6
Low priority partial-write completed
#122,v,g,n,s,PM_MEM_LO_PRIO_WR_CMPL,Low priority write completed
##736E6
Low priority write completed
#123,v,g,n,s,PM_MEM_PW_CMPL,Memory partial-write completed
##734E6
Memory partial-write completed
#124,v,g,n,s,PM_MEM_PW_GATH,Memory partial-write gathered
##714C6
Memory partial-write gathered
#125,v,g,n,s,PM_MEM_RQ_DISP_BUSY1to7,Memory read queue dispatched with 1-7 queues busy
##711C6
Memory read queue dispatched with 1-7 queues busy
#126,v,g,n,s,PM_MEM_SPEC_RD_CANCEL,Speculative memory read canceled
##712C6
Speculative memory read canceled
#127,v,g,n,s,PM_MEM_WQ_DISP_BUSY8to15,Memory write queue dispatched with 8-15 queues busy
##733E6
Memory write queue dispatched with 8-15 queues busy
#128,v,g,n,s,PM_MEM_WQ_DISP_DCLAIM,Memory write queue dispatched due to dclaim/flush
##713C6
Memory write queue dispatched due to dclaim/flush
#129,v,g,n,n,PM_MRK_DATA_FROM_L25_MOD,Marked data loaded from L2.5 modified
##C70A2
DL1 was reloaded with modified (M) data from the L2 of a chip on this MCM due to a marked demand load
#130,v,g,n,n,PM_MRK_DATA_FROM_L275_SHR,Marked data loaded from L2.75 shared
##C7097
DL1 was reloaded with shared (T) data from the L2 of another MCM due to a marked demand load
#131,v,g,n,n,PM_MRK_DATA_FROM_L35_MOD,Marked data loaded from L3.5 modified
##C70A6
Marked data loaded from L3.5 modified
#132,v,g,n,n,PM_MRK_DATA_FROM_L375_SHR,Marked data loaded from L3.75 shared
##C709E
Marked data loaded from L3.75 shared
#133,v,g,n,n,PM_MRK_DATA_FROM_LMEM,Marked data loaded from local memory
##C70A0
Marked data loaded from local memory
#134,v,g,n,n,PM_MRK_DSLB_MISS,Marked Data SLB misses
##C50C7
Marked Data SLB misses
#135,v,g,n,n,PM_MRK_DTLB_MISS,Marked Data TLB misses
##C50C6
Marked Data TLB misses
#136,v,g,n,n,PM_MRK_FPU_FIN,Marked instruction FPU processing finished
##00014
One of the Floating Point Units finished a marked instruction. Instructions that finish may not necessary complete
#137,v,g,n,n,PM_MRK_INST_FIN,Marked instruction finished
##00005
One of the execution units finished a marked instruction. Instructions that finish may not necessary complete
#138,v,g,n,n,PM_MRK_L1_RELOAD_VALID,Marked L1 reload data source valid
##C70E4
The source information is valid and is for a marked load
#139,v,g,n,n,PM_MRK_LSU0_FLUSH_LRQ,LSU0 marked LRQ flushes
##810C2
A marked load was flushed by unit 0 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#140,u,g,n,n,PM_MRK_LSU0_FLUSH_SRQ,LSU0 marked SRQ flushes
##810C3
A marked store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#141,v,g,n,n,PM_MRK_LSU0_FLUSH_UST,LSU0 marked unaligned store flushes
##810C1
A marked store was flushed from unit 0 because it was unaligned
#142,v,g,n,n,PM_MRK_LSU0_FLUSH_ULD,LSU0 marked unaligned load flushes
##810C0
A marked load was flushed from unit 0 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#143,v,g,n,n,PM_MRK_LSU1_FLUSH_LRQ,LSU1 marked LRQ flushes
##810C6
A marked load was flushed by unit 1 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#144,u,g,n,n,PM_MRK_LSU1_FLUSH_SRQ,LSU1 marked SRQ flushes
##810C7
A marked store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#145,v,g,n,n,PM_MRK_LSU1_FLUSH_ULD,LSU1 marked unaligned load flushes
##810C4
A marked load was flushed from unit 1 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#146,u,g,n,n,PM_MRK_LSU1_FLUSH_UST,LSU1 marked unaligned store flushes
##810C5
A marked store was flushed from unit 1 because it was unaligned (crossed a 4k boundary)
#147,v,g,n,n,PM_MRK_LSU_FLUSH_LRQ,Marked LRQ flushes
##81088
A marked load was flushed because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#148,v,g,n,n,PM_MRK_LSU_FLUSH_UST,Marked unaligned store flushes
##81090
A marked store was flushed because it was unaligned
#149,u,g,n,n,PM_MRK_LSU_SRQ_INST_VALID,Marked instruction valid in SRQ
##C70E6
This signal is asserted every cycle when a marked request is resident in the Store Request Queue
#150,v,g,n,n,PM_MRK_ST_CMPL_INT,Marked store completed with intervention
##00003
A marked store previously sent to the memory subsystem completed (data home) after requiring intervention
#151,v,g,n,n,PM_PMC2_OVERFLOW,PMC2 Overflow
##0000A
PMC2 Overflow
#152,v,g,n,n,PM_PMC6_OVERFLOW,PMC6 Overflow
##0001A
PMC6 Overflow
#153,v,g,n,n,PM_PTEG_FROM_L25_MOD,PTEG loaded from L2.5 modified
##830A2
PTEG loaded from L2.5 modified
#154,v,g,n,n,PM_PTEG_FROM_L275_SHR,PTEG loaded from L2.75 shared
##83097
PTEG loaded from L2.75 shared
#155,v,g,n,n,PM_PTEG_FROM_L35_MOD,PTEG loaded from L3.5 modified
##830A6
PTEG loaded from L3.5 modified
#156,v,g,n,n,PM_PTEG_FROM_L375_SHR,PTEG loaded from L3.75 shared
##8309E
PTEG loaded from L3.75 shared
#157,v,g,n,n,PM_PTEG_FROM_LMEM,PTEG loaded from local memory
##830A0
PTEG loaded from local memory
#158,v,g,n,s,PM_SNOOP_PARTIAL_RTRY_QFULL,Snoop partial write retry due to partial-write queues full
##730E6
Snoop partial write retry due to partial-write queues full
#159,v,g,n,s,PM_SNOOP_PW_RETRY_WQ_PWQ,Snoop partial-write retry due to collision with active write or partial-write queue
##717C6
Snoop partial-write retry due to collision with active write or partial-write queue
#160,v,g,n,s,PM_SNOOP_RD_RETRY_WQ,Snoop read retry due to collision with active write queue
##715C6
Snoop read retry due to collision with active write queue
#161,v,g,n,s,PM_SNOOP_WR_RETRY_QFULL,Snoop read retry due to read queue full
##710C6
Snoop read retry due to read queue full
#162,v,g,n,s,PM_SNOOP_WR_RETRY_WQ,Snoop write/dclaim retry due to collision with active write queue
##716C6
Snoop write/dclaim retry due to collision with active write queue
#163,v,g,n,n,PM_STOP_COMPLETION,Completion stopped
##00018
RAS Unit has signaled completion to stop
#164,v,g,n,n,PM_ST_MISS_L1,L1 D cache store misses
##C10C3
A store missed the dcache
#165,v,g,n,n,PM_ST_REF_L1,L1 D cache store references
##C1090
Total DL1 Store references
#166,v,g,n,n,PM_ST_REF_L1_LSU0,LSU0 L1 D cache store references
##C10C1
A store executed on unit 0
#167,v,g,n,n,PM_ST_REF_L1_LSU1,LSU1 L1 D cache store references
##C10C5
A store executed on unit 1
#168,v,g,n,n,PM_SUSPENDED,Suspended
##00000
Suspended
#169,v,g,n,s,PM_CLB_EMPTY_CYC,Cycles CLB empty
##410C6
Cycles CLB completely empty
#170,v,g,n,s,PM_THRD_L2MISS_BOTH_CYC,Cycles both threads in L2 misses
##410C7
Cycles both threads in L2 misses
#171,v,g,n,n,PM_THRD_PRIO_DIFF_0_CYC,Cycles no thread priority difference
##430E3
Cycles no thread priority difference
#172,v,g,n,n,PM_THRD_PRIO_DIFF_1or2_CYC,Cycles thread priority difference is 1 or 2
##430E4
Cycles thread priority difference is 1 or 2
#173,v,g,n,n,PM_THRD_PRIO_DIFF_3or4_CYC,Cycles thread priority difference is 3 or 4
##430E5
Cycles thread priority difference is 3 or 4
#174,v,g,n,n,PM_THRD_PRIO_DIFF_5or6_CYC,Cycles thread priority difference is 5 or 6
##430E6
Cycles thread priority difference is 5 or 6
#175,v,g,n,n,PM_THRD_PRIO_DIFF_minus1or2_CYC,Cycles thread priority difference is -1 or -2
##430E2
Cycles thread priority difference is -1 or -2
#176,v,g,n,n,PM_THRD_PRIO_DIFF_minus3or4_CYC,Cycles thread priority difference is -3 or -4
##430E1
Cycles thread priority difference is -3 or -4
#177,v,g,n,n,PM_THRD_PRIO_DIFF_minus5or6_CYC,Cycles thread priority difference is -5 or -6
##430E0
Cycles thread priority difference is -5 or -6
#178,v,g,n,s,PM_THRD_SEL_OVER_CLB_EMPTY,Thread selection overides caused by CLB empty
##410C2
Thread selection overides caused by CLB empty
#179,v,g,n,s,PM_THRD_SEL_OVER_GCT_IMBAL,Thread selection overides caused by GCT imbalance
##410C4
Thread selection overides caused by GCT imbalance
#180,v,g,n,s,PM_THRD_SEL_OVER_ISU_HOLD,Thread selection overides caused by ISU holds
##410C5
Thread selection overides caused by ISU holds
#181,v,g,n,s,PM_THRD_SEL_OVER_L2MISS,Thread selection overides caused by L2 misses
##410C3
Thread selection overides caused by L2 misses
#182,v,g,n,s,PM_THRD_SEL_T0,Decode selected thread 0
##410C0
Decode selected thread 0
#183,v,g,n,s,PM_THRD_SEL_T1,Decode selected thread 1
##410C1
Decode selected thread 1
#184,v,g,n,s,PM_THRD_SMT_HANG,SMT hang detected
##330E7
SMT hang detected
#185,v,g,t,n,PM_THRESH_TIMEO,Threshold timeout
##0000B
The threshold timer expired
#186,v,g,n,n,PM_TLBIE_HELD,TLBIE held at dispatch
##130E4
TLBIE held at dispatch
#187,v,g,n,n,PM_DATA_FROM_L2MISS,Data loaded missed L2
##C309B
DL1 was reloaded from beyond L2.
#188,v,g,n,n,PM_MRK_DATA_FROM_L2MISS,Marked data loaded missed L2
##C709B
DL1 was reloaded from beyond L2 due to a marked demand load.
#189,v,g,n,n,PM_PTEG_FROM_L2MISS,PTEG loaded from L2 miss
##8309B
PTEG loaded from L2 miss

$$$$$$$$

{ counter 4 }
#0,v,g,n,n,PM_0INST_FETCH,No instructions fetched
##2208D
No instructions were fetched this cycles (due to IFU hold, redirect, or icache miss)
#1,v,g,n,n,PM_BR_ISSUED,Branches issued
##230E4
This signal will be asserted each time the ISU issues a branch instruction. This signal will be asserted each time the ISU selects a branch instruction to issue.
#2,v,g,n,n,PM_BR_MPRED_CR,Branch mispredictions due to CR bit setting
##230E5
This signal is asserted when the branch execution unit detects a branch mispredict because the CR value is opposite of the predicted value. This signal is asserted after a branch issue event and will result in a branch redirect flush if not overridden by a flush of an older instruction.
#3,v,g,n,n,PM_BR_MPRED_TA,Branch mispredictions due to target address
##230E6
branch miss predict due to a target address prediction. This signal will be asserted each time the branch execution unit detects an incorrect target address prediction. This signal will be asserted after a valid branch execution unit issue and will cause a branch mispredict flush unless a flush is detected from an older instruction.
#4,v,g,n,n,PM_BR_PRED_CR,A conditional branch was predicted, CR prediction
##230E2
A conditional branch was predicted, CR prediction
#5,v,g,n,n,PM_BR_PRED_CR_TA,A conditional branch was predicted, CR and target prediction
##23087
A conditional branch was predicted, CR and target prediction
#6,v,g,n,n,PM_BR_PRED_TA,A conditional branch was predicted, target prediction
##230E3
A conditional branch was predicted, target prediction
#7,v,g,n,n,PM_CMPLU_STALL_DIV,Completion stall caused by DIV instruction
##11099
Completion stall caused by DIV instruction
#8,v,g,n,n,PM_CMPLU_STALL_ERAT_MISS,Completion stall caused by ERAT miss
##1109B
Completion stall caused by ERAT miss
#9,v,g,n,n,PM_CMPLU_STALL_FPU,Completion stall caused by FPU instruction
##11098
Completion stall caused by FPU instruction
#10,v,g,n,n,PM_CMPLU_STALL_REJECT,Completion stall caused by reject
##1109A
Completion stall caused by reject
#11,u,g,n,s,PM_CRQ_FULL_CYC,Cycles CR issue queue full
##110C1
The ISU sends a signal indicating that the issue queue that feeds the ifu cr unit cannot accept any more group (queue is full of groups).
#12,v,g,n,s,PM_CYC,Processor cycles
##0000F
Processor cycles
#13,v,g,n,n,PM_DATA_FROM_L275_MOD,Data loaded from L2.75 modified
##C3097
DL1 was reloaded with modified (M) data from the L2 of another MCM due to a demand load. 
#14,v,g,n,n,PM_DATA_FROM_L375_MOD,Data loaded from L3.75 modified
##C309E
Data loaded from L3.75 modified
#15,v,g,n,n,PM_DATA_FROM_RMEM,Data loaded from remote memory
##C3087
Data loaded from remote memory
#16,u,g,n,s,PM_DC_INV_L2,L1 D cache entries invalidated from L2
##C10C7
A dcache invalidated was received from the L2 because a line in L2 was castout.
#17,v,g,n,n,PM_DC_PREF_DST,DST (Data Stream Touch) stream start
##830E6
DST (Data Stream Touch) stream start
#18,v,g,n,n,PM_DC_PREF_STREAM_ALLOC,D cache new prefetch stream allocated
##830E7
A new Prefetch Stream was allocated
#19,v,g,n,n,PM_EE_OFF,Cycles MSR(EE) bit off
##130E3
The number of Cycles MSR(EE) bit was off.
#20,u,g,n,n,PM_EE_OFF_EXT_INT,Cycles MSR(EE) bit off and external interrupt pending
##130E7
Cycles MSR(EE) bit off and external interrupt pending
#21,v,g,n,n,PM_EXT_INT,External interrupts
##00003
An external interrupt occurred
#22,v,g,n,n,PM_FAB_CMD_RETRIED,Fabric command retried
##710C7
Fabric command retried
#23,v,g,n,s,PM_FAB_DCLAIM_RETRIED,dclaim retried
##730E7
dclaim retried
#24,v,g,n,s,PM_FAB_M1toVNorNN_SIDECAR_EMPTY,M1 to VN/NN sidecar empty
##712C7
M1 to VN/NN sidecar empty
#25,v,g,n,s,PM_FAB_P1toVNorNN_SIDECAR_EMPTY,P1 to VN/NN sidecar empty
##711C7
P1 to VN/NN sidecar empty
#26,v,g,n,s,PM_FAB_PNtoNN_SIDECAR,PN to NN beat went to sidecar first
##713C7
PN to NN beat went to sidecar first
#27,v,g,n,s,PM_FAB_PNtoVN_SIDECAR,PN to VN beat went to sidecar first
##733E7
PN to VN beat went to sidecar first
#28,v,g,n,s,PM_FAB_VBYPASS_EMPTY,Vertical bypass buffer empty
##731E7
Vertical bypass buffer empty
#29,v,g,n,n,PM_FLUSH_BR_MPRED,Flush caused by branch mispredict
##110C6
Flush caused by branch mispredict
#30,v,g,n,s,PM_FLUSH_IMBAL,Flush caused by thread GCT imbalance
##330E3
Flush caused by thread GCT imbalance
#31,v,g,n,n,PM_FLUSH,Flushes
##110C7
Flushes
#32,v,g,n,s,PM_FLUSH_SB,Flush caused by scoreboard operation
##330E2
Flush caused by scoreboard operation
#33,v,g,n,s,PM_FLUSH_SYNC,Flush caused by sync
##330E1
Flush caused by sync
#34,v,g,n,n,PM_FPU0_FEST,FPU0 executed FEST instruction
##010C2
This signal is active for one cycle when fp0 is executing one of the estimate instructions. This could be fres* or frsqrte* where XYZ* means XYZ or XYZ. 
#35,v,g,n,n,PM_FPU0_FIN,FPU0 produced a result
##010C3
fp0 finished, produced a result This only indicates finish, not completion. 
#36,v,g,n,n,PM_FPU0_FMOV_FEST,FPU0 executed FMOV or FEST instructions
##010C0
This signal is active for one cycle when fp0 is executing a move kind of instruction or one of the estimate instructions.. This could be fmr*, fneg*, fabs*, fnabs* , fres* or frsqrte* where XYZ* means XYZ or XYZ
#37,v,g,n,n,PM_FPU0_FPSCR,FPU0 executed FPSCR instruction
##030E0
This signal is active for one cycle when fp0 is executing fpscr move related instruction. This could be mtfsfi*, mtfsb0*, mtfsb1*. mffs*, mtfsf*, mcrsf* where XYZ* means XYZ, XYZs, XYZ., XYZs
#38,v,g,n,n,PM_FPU0_FRSP_FCONV,FPU0 executed FRSP or FCONV instructions
##010C1
This signal is active for one cycle when fp0 is executing frsp or convert kind of instruction. This could be frsp*, fcfid*, fcti* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#39,v,g,n,n,PM_FPU1_FEST,FPU1 executed FEST instruction
##010C6
This signal is active for one cycle when fp1 is executing one of the estimate instructions. This could be fres* or frsqrte* where XYZ* means XYZ or XYZ. 
#40,v,g,n,n,PM_FPU1_FIN,FPU1 produced a result
##010C7
fp1 finished, produced a result. This only indicates finish, not completion. 
#41,v,g,n,n,PM_FPU1_FMOV_FEST,FPU1 executing FMOV or FEST instructions
##010C4
This signal is active for one cycle when fp1 is executing a move kind of instruction or one of the estimate instructions.. This could be fmr*, fneg*, fabs*, fnabs* , fres* or frsqrte* where XYZ* means XYZ or XYZ
#42,v,g,n,n,PM_FPU1_FRSP_FCONV,FPU1 executed FRSP or FCONV instructions
##010C5
This signal is active for one cycle when fp1 is executing frsp or convert kind of instruction. This could be frsp*, fcfid*, fcti* where XYZ* means XYZ, XYZs, XYZ., XYZs.
#43,v,g,n,n,PM_FPU_FEST,FPU executed FEST instruction
##01090
This signal is active for one cycle when executing one of the estimate instructions. This could be fres* or frsqrte* where XYZ* means XYZ or XYZ. Combined Unit 0 + Unit 1.
#44,v,g,n,n,PM_FPU_FIN,FPU produced a result
##01088
FPU finished, produced a result This only indicates finish, not completion. Combined Unit 0 + Unit 1
#45,v,g,n,s,PM_FXLS0_FULL_CYC,Cycles FXU0/LS0 queue full
##110C0
The issue queue for FXU/LSU unit 0 cannot accept any more instructions. Issue is stopped
#46,v,g,n,s,PM_FXLS1_FULL_CYC,Cycles FXU1/LS1 queue full
##110C4
The issue queue for FXU/LSU unit 0 cannot accept any more instructions. Issue is stopped
#47,c,g,n,n,PM_FXLS_FULL_CYC,Cycles FXLS queue is full
##11090
Cycles when one or both FXU/LSU issue queue are full
#48,v,g,n,n,PM_FXU0_FIN,FXU0 produced a result
##130E2
The Fixed Point unit 0 finished an instruction and produced a result
#49,u,g,n,n,PM_FXU1_BUSY_FXU0_IDLE,FXU1 busy FXU0 idle
##00012
FXU0 was idle while FXU1 was busy
#50,v,g,n,n,PM_FXU1_FIN,FXU1 produced a result
##130E6
The Fixed Point unit 1 finished an instruction and produced a result
#51,v,g,n,n,PM_GCT_NOSLOT_BR_MPRED,No slot in GCT caused by branch mispredict
##1009C
This thread has no slot in the GCT because of branch mispredict
#52,v,g,n,n,PM_GCT_FULL_CYC,Cycles GCT full
##0001F
The ISU sends a signal indicating the gct is full. 
#53,v,g,n,s,PM_GPR_MAP_FULL_CYC,Cycles GPR mapper full
##130E5
The ISU sends a signal indicating that the gpr mapper cannot accept any more groups. Dispatch is stopped. Note: this condition indicates that a pool of mapper is full but the entire mapper may not be.
#54,v,g,n,n,PM_GRP_DISP_BLK_SB_CYC,Cycles group dispatch blocked by scoreboard
##130E1
The ISU sends a signal indicating that dispatch is blocked by scoreboard.
#55,v,g,n,n,PM_GRP_DISP_REJECT,Group dispatch rejected
##00002
A group that previously attempted dispatch was rejected.
#56,v,g,n,n,PM_IC_DEMAND_L2_BHT_REDIRECT,L2 I cache demand request due to BHT redirect
##230E0
L2 I cache demand request due to BHT redirect
#57,v,g,n,n,PM_IC_DEMAND_L2_BR_REDIRECT,L2 I cache demand request due to branch redirect
##230E1
L2 I cache demand request due to branch redirect
#58,v,g,n,n,PM_IC_PREF_INSTALL,Instruction prefetched installed in prefetch
##210C7
New line coming into the prefetch buffer
#59,v,g,n,n,PM_INST_CMPL,Instructions completed
##00001
Number of Eligible Instructions that completed. 
#60,v,g,n,n,PM_INST_DISP,Instructions dispatched
##00009
The ISU sends the number of instructions dispatched.
#61,v,g,n,n,PM_INST_FROM_L275_MOD,Instruction fetched from L2.75 modified
##22096
Instruction fetched from L2.75 modified
#62,v,g,n,n,PM_INST_FROM_L375_MOD,Instruction fetched from L3.75 modified
##2209D
Instruction fetched from L3.75 modified
#63,v,g,n,n,PM_INST_FROM_RMEM,Instruction fetched from remote memory
##22086
Instruction fetched from remote memory
#64,v,g,n,n,PM_L1_DCACHE_RELOAD_VALID,L1 reload data source valid
##C30E4
The data source information is valid
#65,v,g,n,n,PM_L1_PREF,L1 cache data prefetches
##C70E7
A request to prefetch data into the L1 was made
#66,v,g,n,n,PM_L1_WRITE_CYC,Cycles writing to instruction L1
##230E7
This signal is asserted each cycle a cache write is active.
#67,v,g,n,s,PM_L2SA_MOD_INV,L2 slice A transition from modified to invalid
##730E0
A cache line in the local L2 directory made a state transition from the Modified state to the Invalid state. This transition was caused by any RWITM snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#68,v,g,n,s,PM_L2SA_RCLD_DISP_FAIL_ADDR,L2 Slice A RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
##711C0
L2 Slice A RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
#69,v,g,n,s,PM_L2SA_RCLD_DISP_FAIL_OTHER,L2 Slice A RC load dispatch attempt failed due to other reasons
##731E0
L2 Slice A RC load dispatch attempt failed due to other reasons
#70,v,g,n,s,PM_L2SA_RCST_DISP_FAIL_ADDR,L2 Slice A RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
##712C0
L2 Slice A RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
#71,v,g,n,s,PM_L2SA_RCST_DISP_FAIL_OTHER,L2 Slice A RC store dispatch attempt failed due to other reasons
##732E0
L2 Slice A RC store dispatch attempt failed due to other reasons
#72,v,g,n,s,PM_L2SA_RC_DISP_FAIL_CO_BUSY_ALL,L2 Slice A RC dispatch attempt failed due to all CO busy
##713C0
L2 Slice A RC dispatch attempt failed due to all CO busy
#73,v,g,n,s,PM_L2SA_SHR_INV,L2 slice A transition from shared to invalid
##710C0
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L, or Tagged) to the Invalid state. This transition was caused by any external snoop request. The event is provided on each of the three slices A,B,and C. NOTE: For this event to be useful the tablewalk duration event should also be counted.
#74,v,g,n,n,PM_L2SA_ST_HIT,L2 slice A store hits
##733E0
A store request made from the core hit in the L2 directory.  This event is provided on each of the three L2 slices A,B, and C.
#75,v,g,n,s,PM_L2SB_MOD_INV,L2 slice B transition from modified to invalid
##730E1
A cache line in the local L2 directory made a state transition from the Modified state to the Invalid state. This transition was caused by any RWITM snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#76,v,g,n,s,PM_L2SB_RCLD_DISP_FAIL_ADDR,L2 Slice B RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
##711C1
L2 Slice B RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
#77,v,g,n,s,PM_L2SB_RCLD_DISP_FAIL_OTHER,L2 Slice B RC load dispatch attempt failed due to other reasons
##731E1
L2 Slice B RC load dispatch attempt failed due to other reasons
#78,v,g,n,s,PM_L2SB_RCST_DISP_FAIL_ADDR,L2 Slice B RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
##712C1
L2 Slice B RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
#79,v,g,n,s,PM_L2SB_RCST_DISP_FAIL_OTHER,L2 Slice B RC store dispatch attempt failed due to other reasons
##732E1
L2 Slice B RC store dispatch attempt failed due to other reasons
#80,v,g,n,s,PM_L2SB_RC_DISP_FAIL_CO_BUSY_ALL,L2 Slice B RC dispatch attempt failed due to all CO busy
##713C1
L2 Slice B RC dispatch attempt failed due to all CO busy
#81,v,g,n,s,PM_L2SB_SHR_INV,L2 slice B transition from shared to invalid
##710C1
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L, or Tagged) to the Invalid state. This transition was caused by any external snoop request. The event is provided on each of the three slices A,B,and C. NOTE: For this event to be useful the tablewalk duration event should also be counted.
#82,v,g,n,n,PM_L2SB_ST_HIT,L2 slice B store hits
##733E1
A store request made from the core hit in the L2 directory.  This event is provided on each of the three L2 slices A,B, and C.
#83,v,g,n,s,PM_L2SC_MOD_INV,L2 slice C transition from modified to invalid
##730E2
A cache line in the local L2 directory made a state transition from the Modified state to the Invalid state. This transition was caused by any RWITM snoop request that hit against a modified entry in the local L2. The event is provided on each of the three slices A,B,and C.
#84,v,g,n,s,PM_L2SC_RCLD_DISP_FAIL_ADDR,L2 Slice C RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
##711C2
L2 Slice C RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ
#85,v,g,n,s,PM_L2SC_RCLD_DISP_FAIL_OTHER,L2 Slice C RC load dispatch attempt failed due to other reasons
##731E2
L2 Slice C RC load dispatch attempt failed due to other reasons
#86,v,g,n,s,PM_L2SC_RCST_DISP_FAIL_ADDR,L2 Slice C RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
##712C2
L2 Slice C RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ
#87,v,g,n,s,PM_L2SC_RCST_DISP_FAIL_OTHER,L2 Slice C RC store dispatch attempt failed due to other reasons
##732E2
L2 Slice C RC store dispatch attempt failed due to other reasons
#88,v,g,n,s,PM_L2SC_RC_DISP_FAIL_CO_BUSY_ALL,L2 Slice C RC dispatch attempt failed due to all CO busy
##713C2
L2 Slice C RC dispatch attempt failed due to all CO busy
#89,v,g,n,s,PM_L2SC_SHR_INV,L2 slice C transition from shared to invalid
##710C2
A cache line in the local L2 directory made a state transition from Shared (Shared, Shared L, or Tagged) to the Invalid state. This transition was caused by any external snoop request. The event is provided on each of the three slices A,B,and C. NOTE: For this event to be useful the tablewalk duration event should also be counted.
#90,v,g,n,n,PM_L2SC_ST_HIT,L2 slice C store hits
##733E2
L2 slice C store hits
#91,v,g,n,n,PM_L2_PREF,L2 cache prefetches
##C50C3
A request to prefetch data into L2 was made
#92,v,g,n,s,PM_L3SA_HIT,L3 slice A hits
##711C3
L3 slice A hits
#93,v,g,n,s,PM_L3SA_MOD_INV,L3 slice A transition from modified to invalid
##730E3
L3 slice A transition from modified to invalid
#94,v,g,n,s,PM_L3SA_SHR_INV,L3 slice A transition from shared to invalid
##710C3
L3 slice A transition from shared to invalid
#95,v,g,n,s,PM_L3SA_SNOOP_RETRY,L3 slice A snoop retries
##731E3
L3 slice A snoop retries
#96,v,g,n,s,PM_L3SB_HIT,L3 slice B hits
##711C4
L3 slice B hits
#97,v,g,n,s,PM_L3SB_MOD_INV,L3 slice B transition from modified to invalid
##730E4
L3 slice B transition from modified to invalid
#98,v,g,n,s,PM_L3SB_SHR_INV,L3 slice B transition from shared to invalid
##710C4
L3 slice B transition from shared to invalid
#99,v,g,n,s,PM_L3SB_SNOOP_RETRY,L3 slice B snoop retries
##731E4
L3 slice B snoop retries
#100,v,g,n,s,PM_L3SC_HIT,L3 Slice C hits
##711C5
L3 Slice C hits
#101,v,g,n,s,PM_L3SC_MOD_INV,L3 slice C transition from modified to invalid
##730E5
L3 slice C transition from modified to invalid
#102,v,g,n,s,PM_L3SC_SHR_INV,L3 slice C transition from shared to invalid
##710C5
L3 slice C transition from shared to invalid
#103,v,g,n,s,PM_L3SC_SNOOP_RETRY,L3 slice C snoop retries
##731E5
L3 slice C snoop retries
#104,v,g,n,n,PM_LD_MISS_L1_LSU0,LSU0 L1 D cache load misses
##C10C2
A load, executing on unit 0, missed the dcache
#105,v,g,n,n,PM_LD_MISS_L1_LSU1,LSU1 L1 D cache load misses
##C10C6
A load, executing on unit 1, missed the dcache
#106,v,g,n,n,PM_LD_REF_L1,L1 D cache load references
##C1090
Total DL1 Load references
#107,v,g,n,n,PM_LD_REF_L1_LSU0,LSU0 L1 D cache load references
##C10C0
A load executed on unit 0
#108,v,g,n,n,PM_LD_REF_L1_LSU1,LSU1 L1 D cache load references
##C10C4
A load executed on unit 1
#109,v,g,n,n,PM_LSU0_LDF,LSU0 executed Floating Point load instruction
##C50C0
A floating point load was executed from LSU unit 0
#110,v,g,n,n,PM_LSU0_NCLD,LSU0 non-cacheable loads
##C50C1
LSU0 non-cacheable loads
#111,v,g,n,n,PM_LSU1_LDF,LSU1 executed Floating Point load instruction
##C50C4
A floating point load was executed from LSU unit 1
#112,v,g,n,n,PM_LSU1_NCLD,LSU1 non-cacheable loads
##C50C5
LSU1 non-cacheable loads
#113,v,g,n,n,PM_LSU_FLUSH,Flush initiated by LSU
##110C5
Flush initiated by LSU
#114,v,g,n,s,PM_LSU_FLUSH_SRQ_FULL,Flush caused by SRQ full
##330E0
Flush caused by SRQ full
#115,v,g,n,n,PM_LSU_LDF,LSU executed Floating Point load instruction
##C5090
LSU executed Floating Point load instruction
#116,u,g,n,s,PM_LSU_LMQ_FULL_CYC,Cycles LMQ full
##C30E7
The LMQ was full
#117,v,g,n,n,PM_LSU_LMQ_LHR_MERGE,LMQ LHR merges
##C70E5
A dcache miss occured for the same real cache line address as an earlier request already in the Load Miss Queue and was merged into the LMQ entry.
#118,v,g,n,s,PM_LSU_LMQ_S0_ALLOC,LMQ slot 0 allocated
##C30E6
The first entry in the LMQ was allocated.
#119,v,g,n,n,PM_LSU_LMQ_S0_VALID,LMQ slot 0 valid
##C30E5
This signal is asserted every cycle when the first entry in the LMQ is valid. The LMQ had eight entries that are allocated FIFO
#120,v,g,n,s,PM_LSU_LRQ_FULL_CYC,Cycles LRQ full
##110C2
The ISU sends this signal when the LRQ is full.
#121,u,g,n,n,PM_DC_PREF_STREAM_ALLOC_BLK,D cache out of prefech streams
##C50C2
D cache out of prefech streams
#122,u,g,n,n,PM_LSU_SRQ_EMPTY_CYC,Cycles SRQ empty
##00015
The Store Request Queue is empty
#123,v,g,n,s,PM_LSU_SRQ_FULL_CYC,Cycles SRQ full
##110C3
The ISU sends this signal when the srq is full.
#124,u,g,n,n,PM_LSU_SRQ_SYNC_CYC,SRQ sync duration
##830E5
This signal is asserted every cycle when a sync is in the SRQ.
#125,v,g,n,n,PM_LWSYNC_HELD,LWSYNC held at dispatch
##130E0
LWSYNC held at dispatch
#126,v,g,n,s,PM_MEM_LO_PRIO_PW_CMPL,Low priority partial-write completed
##737E6
Low priority partial-write completed
#127,v,g,n,s,PM_MEM_LO_PRIO_WR_CMPL,Low priority write completed
##736E6
Low priority write completed
#128,v,g,n,s,PM_MEM_PW_CMPL,Memory partial-write completed
##734E6
Memory partial-write completed
#129,v,g,n,s,PM_MEM_PW_GATH,Memory partial-write gathered
##714C6
Memory partial-write gathered
#130,v,g,n,s,PM_MEM_RQ_DISP_BUSY1to7,Memory read queue dispatched with 1-7 queues busy
##711C6
Memory read queue dispatched with 1-7 queues busy
#131,v,g,n,s,PM_MEM_SPEC_RD_CANCEL,Speculative memory read canceled
##712C6
Speculative memory read canceled
#132,v,g,n,s,PM_MEM_WQ_DISP_BUSY8to15,Memory write queue dispatched with 8-15 queues busy
##733E6
Memory write queue dispatched with 8-15 queues busy
#133,v,g,n,s,PM_MEM_WQ_DISP_DCLAIM,Memory write queue dispatched due to dclaim/flush
##713C6
Memory write queue dispatched due to dclaim/flush
#134,v,g,n,n,PM_MRK_CRU_FIN,Marked instruction CRU processing finished
##00005
The Condition Register Unit finished a marked instruction. Instructions that finish may not necessary complete
#135,v,g,n,n,PM_MRK_DATA_FROM_L25_MOD_CYC,Marked load latency from L2.5 modified
##C70A2
Marked load latency from L2.5 modified
#136,v,g,n,n,PM_MRK_DATA_FROM_L275_MOD,Marked data loaded from L2.75 modified
##C7097
DL1 was reloaded with modified (M) data from the L2 of another MCM due to a marked demand load. 
#137,v,g,n,n,PM_MRK_DATA_FROM_L275_MOD_CYC,Marked load latency from L2.75 modified
##C70A3
Marked load latency from L2.75 modified
#138,v,g,n,n,PM_MRK_DATA_FROM_L35_MOD_CYC,Marked load latency from L3.5 modified
##C70A6
Marked load latency from L3.5 modified
#139,v,g,n,n,PM_MRK_DATA_FROM_L375_MOD,Marked data loaded from L3.75 modified
##C709E
Marked data loaded from L3.75 modified
#140,v,g,n,n,PM_MRK_DATA_FROM_L375_MOD_CYC,Marked load latency from L3.75 modified
##C70A7
Marked load latency from L3.75 modified
#141,v,g,n,n,PM_MRK_DATA_FROM_LMEM_CYC,Marked load latency from local memory
##C70A0
Marked load latency from local memory
#142,v,g,n,n,PM_MRK_DATA_FROM_RMEM,Marked data loaded from remote memory
##C7087
Marked data loaded from remote memory
#143,v,g,n,n,PM_MRK_DATA_FROM_RMEM_CYC,Marked load latency from remote memory
##C70A1
Marked load latency from remote memory
#144,v,g,n,n,PM_MRK_DSLB_MISS,Marked Data SLB misses
##C50C7
Marked Data SLB misses
#145,v,g,n,n,PM_MRK_DTLB_MISS,Marked Data TLB misses
##C50C6
Marked Data TLB misses
#146,v,g,n,n,PM_MRK_GRP_CMPL,Marked group completed
##00013
A group containing a sampled instruction completed. Microcoded instructions that span multiple groups will generate this event once per group.
#147,v,g,n,n,PM_MRK_GRP_IC_MISS,Group experienced marked I cache miss
##12091
Group experienced marked I cache miss
#148,v,g,n,n,PM_MRK_GRP_TIMEO,Marked group completion timeout
##0000B
The sampling timeout expired indicating that the previously sampled instruction is no longer in the processor
#149,v,g,n,n,PM_MRK_L1_RELOAD_VALID,Marked L1 reload data source valid
##C70E4
The source information is valid and is for a marked load
#150,v,g,n,n,PM_MRK_LSU0_FLUSH_LRQ,LSU0 marked LRQ flushes
##810C2
A marked load was flushed by unit 0 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#151,u,g,n,n,PM_MRK_LSU0_FLUSH_SRQ,LSU0 marked SRQ flushes
##810C3
A marked store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#152,v,g,n,n,PM_MRK_LSU0_FLUSH_UST,LSU0 marked unaligned store flushes
##810C1
A marked store was flushed from unit 0 because it was unaligned
#153,v,g,n,n,PM_MRK_LSU0_FLUSH_ULD,LSU0 marked unaligned load flushes
##810C0
A marked load was flushed from unit 0 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#154,v,g,n,n,PM_MRK_LSU1_FLUSH_LRQ,LSU1 marked LRQ flushes
##810C6
A marked load was flushed by unit 1 because a younger load executed before an older store executed and they had overlapping data OR two loads executed out of order and they have byte overlap and there was a snoop in between to an overlapped byte.
#155,u,g,n,n,PM_MRK_LSU1_FLUSH_SRQ,LSU1 marked SRQ flushes
##810C7
A marked store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#156,v,g,n,n,PM_MRK_LSU1_FLUSH_ULD,LSU1 marked unaligned load flushes
##810C4
A marked load was flushed from unit 1 because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#157,u,g,n,n,PM_MRK_LSU1_FLUSH_UST,LSU1 marked unaligned store flushes
##810C5
A marked store was flushed from unit 1 because it was unaligned (crossed a 4k boundary)
#158,c,g,n,n,PM_MRK_LSU_FIN,Marked instruction LSU processing finished
##00014
One of the Load/Store Units finished a marked instruction. Instructions that finish may not necessary complete
#159,v,g,n,n,PM_MRK_LSU_FLUSH_SRQ,Marked SRQ flushes
##81088
A marked store was flushed because younger load hits and older store that is already in the SRQ or in the same group.
#160,v,g,n,n,PM_MRK_LSU_FLUSH_ULD,Marked unaligned load flushes
##81090
A marked load was flushed because it was unaligned (crossed a 64byte boundary, or 32 byte if it missed the L1)
#161,u,g,n,n,PM_MRK_LSU_SRQ_INST_VALID,Marked instruction valid in SRQ
##C70E6
This signal is asserted every cycle when a marked request is resident in the Store Request Queue
#162,v,g,n,n,PM_PMC3_OVERFLOW,PMC3 Overflow
##0000A
PMC3 Overflow
#163,v,g,n,n,PM_PTEG_FROM_L275_MOD,PTEG loaded from L2.75 modified
##83097
PTEG loaded from L2.75 modified
#164,v,g,n,n,PM_PTEG_FROM_L375_MOD,PTEG loaded from L3.75 modified
##8309E
PTEG loaded from L3.75 modified
#165,v,g,n,n,PM_PTEG_FROM_RMEM,PTEG loaded from remote memory
##83087
PTEG loaded from remote memory
#166,v,g,n,s,PM_SNOOP_PARTIAL_RTRY_QFULL,Snoop partial write retry due to partial-write queues full
##730E6
Snoop partial write retry due to partial-write queues full
#167,v,g,n,s,PM_SNOOP_PW_RETRY_WQ_PWQ,Snoop partial-write retry due to collision with active write or partial-write queue
##717C6
Snoop partial-write retry due to collision with active write or partial-write queue
#168,v,g,n,s,PM_SNOOP_RD_RETRY_WQ,Snoop read retry due to collision with active write queue
##715C6
Snoop read retry due to collision with active write queue
#169,v,g,n,s,PM_SNOOP_WR_RETRY_QFULL,Snoop read retry due to read queue full
##710C6
Snoop read retry due to read queue full
#170,v,g,n,s,PM_SNOOP_WR_RETRY_WQ,Snoop write/dclaim retry due to collision with active write queue
##716C6
Snoop write/dclaim retry due to collision with active write queue
#171,v,g,n,n,PM_ST_MISS_L1,L1 D cache store misses
##C10C3
A store missed the dcache
#172,v,g,n,n,PM_ST_REF_L1_LSU0,LSU0 L1 D cache store references
##C10C1
A store executed on unit 0
#173,v,g,n,n,PM_ST_REF_L1_LSU1,LSU1 L1 D cache store references
##C10C5
A store executed on unit 1
#174,v,g,n,n,PM_SUSPENDED,Suspended
##00000
Suspended
#175,v,g,n,s,PM_CLB_EMPTY_CYC,Cycles CLB empty
##410C6
Cycles CLB completely empty
#176,v,g,n,s,PM_THRD_L2MISS_BOTH_CYC,Cycles both threads in L2 misses
##41084,410C7
Cycles both threads in L2 misses
#177,v,g,n,n,PM_THRD_PRIO_DIFF_0_CYC,Cycles no thread priority difference
##430E3
Cycles no thread priority difference
#178,v,g,n,n,PM_THRD_PRIO_DIFF_1or2_CYC,Cycles thread priority difference is 1 or 2
##430E4
Cycles thread priority difference is 1 or 2
#179,v,g,n,n,PM_THRD_PRIO_DIFF_3or4_CYC,Cycles thread priority difference is 3 or 4
##430E5
Cycles thread priority difference is 3 or 4
#180,v,g,n,n,PM_THRD_PRIO_DIFF_5or6_CYC,Cycles thread priority difference is 5 or 6
##430E6
Cycles thread priority difference is 5 or 6
#181,v,g,n,n,PM_THRD_PRIO_DIFF_minus1or2_CYC,Cycles thread priority difference is -1 or -2
##430E2
Cycles thread priority difference is -1 or -2
#182,v,g,n,n,PM_THRD_PRIO_DIFF_minus3or4_CYC,Cycles thread priority difference is -3 or -4
##430E1
Cycles thread priority difference is -3 or -4
#183,v,g,n,n,PM_THRD_PRIO_DIFF_minus5or6_CYC,Cycles thread priority difference is -5 or -6
##430E0
Cycles thread priority difference is -5 or -6
#184,v,g,n,s,PM_THRD_SEL_OVER_CLB_EMPTY,Thread selection overides caused by CLB empty
##410C2
Thread selection overides caused by CLB empty
#185,v,g,n,s,PM_THRD_SEL_OVER_GCT_IMBAL,Thread selection overides caused by GCT imbalance
##410C4
Thread selection overides caused by GCT imbalance
#186,v,g,n,s,PM_THRD_SEL_OVER_ISU_HOLD,Thread selection overides caused by ISU holds
##410C5
Thread selection overides caused by ISU holds
#187,v,g,n,s,PM_THRD_SEL_OVER_L2MISS,Thread selection overides caused by L2 misses
##410C3
Thread selection overides caused by L2 misses
#188,v,g,n,s,PM_THRD_SEL_T0,Decode selected thread 0
##410C0
Decode selected thread 0
#189,v,g,n,s,PM_THRD_SEL_T1,Decode selected thread 1
##410C1
Decode selected thread 1
#190,v,g,n,s,PM_THRD_SMT_HANG,SMT hang detected
##330E7
SMT hang detected
#191,v,g,n,n,PM_TLBIE_HELD,TLBIE held at dispatch
##130E4
TLBIE held at dispatch
#192,v,g,n,n,PM_WORK_HELD,Work held
##0000C
RAS Unit has signaled completion to stop and there are groups waiting to complete

$$$$$$$$

{ counter 5 }
#0,v,g,n,n,PM_INST_CMPL,Instructions completed
##00009
Number of PPC instructions completed. 

$$$$$$$$

{ counter 6 }
#0,v,g,n,n,PM_RUN_CYC,Run cycles
##00005
Processor Cycles gated by the run latch