PARTITION-PIB PIB-DEFINITIONS ::= BEGIN
IMPORTS
ibrpib
FROM TUBS-SMI
Unsigned32, Integer32,
MODULE-IDENTITY, OBJECT-TYPE, TEXTUAL-CONVENTION
FROM COPS-PR-SPPI
InstanceId
FROM COPS-PR-SPPI-TC
TruthValue
FROM SNMPv2-TC
InetAddress
FROM INET-ADDRESS-MIB;
switchPartitionPib MODULE-IDENTITY
SUBJECT-CATEGORIES { all }
LAST-UPDATED "200201010000Z" -- modified
ORGANIZATION "IETF"
CONTACT-INFO "
Todd A. Anderson
Intel
2111 NE 25th Avenue
Hillsboro, OR 97124 USA
Phone: +1 503 712 1760
Email: todd.a.anderson@intel.com
Avri Doria
Nortel Networks
600 Technology Park Drive
Billerica MA 01821
Phone: +1 401 663 5024
Email: avri@nortelnetworks.com
Jiang Yong
Telia Research AB
123 86 Farsta
Sweden
Phone: +46 (0) 8 713 81 25
Email: yong.b.jiang@telia.se
Jerry Sydir
CPlane Inc.
5150 El Camino Real Suite B-31
Los Altos, CA 94022
Phone: +1(650) 938-8066 x102
sydir@cplane.com
Balaji Srinivasan
CPlane Inc.
5150 El Camino Real Suite B-31
Los Altos, CA 94022
phone: +1(650) 938-8066 x103
balaji@cplane.com"
DESCRIPTION
"The PIB module specifies a set of policy rule classes
for partitioning a single switch into a set of virtual
switches."
::= { ibrpib 19 }
vSConfig OBJECT IDENTIFIER ::= { switchPartitionPib 1 }
PortDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The following type is used to specify the direction of the
label ranges and the bandwidth in the physical port of the
switch as well as the virtual port of the virtual switch."
SYNTAX INTEGER {
incoming(1),
outgoing(2)
}
RatioString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model a floating number,
specifically here the cell loss ratio and a
probability number. It is required to be of the form
m:n, where m and n are both integers and represent a
floating number m divided by n."
SYNTAX OCTET STRING (SIZE(3))
VectorString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model a 2-dimentional
number (x,y). Here it is used to specify the vpi/vci
range for an ATM interface. 2 vectors, (minVpi,
minVci) and (maxVpi, maxVci), make up a label range.
It is required to have the format x:y"
SYNTAX OCTET STRING (SIZE(3..8))
PortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model the port type of the
switch"
SYNTAX INTEGER {
atm(1),
frameRelay(2),
ethernetSwitch(3),
mpls(4),
ipRouting(5)
}
--
--================================================================
--This table performParamTable is used to represent the
--performance targets associated with the equivalent bandwidths
--for each port. This table allows the bandwidth, buffer space,
--and queue schedulers assigned to a VS to be simply abstracted
--using a single parameter: the Equivalent bandwidth per port
--assigned to the VS. Each entry in the VS interface bandwidth
--table uses its serviceParamIndex to point to a row in this
--table. Then the equivalent bandwidth points to a performance
--target set by the service descriptor parameters. The performance
--target is most common in the form of a loss target but also a
--delay target can be used.
--================================================================
performParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF PerformParamEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured performance targets
for this switch"
::= { switchPartitionPib 2 }
performParamEntry OBJECT-TYPE
SYNTAX PerformParamEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives each performance target
parameters"
PIB-INDEX { performParamIndex }
::= { performParamTable 1 }
PerformParamEntry ::=
SEQUENCE {
performParamIndex InstanceId,
performPLR RatioString,
performMaxDelay INTEGER,
performDelayOverProb RatioString
}
performParamIndex OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Identifies each performance target"
::= { performParamEntry 1 }
performPLR OBJECT-TYPE
SYNTAX RatioString
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This indicates the packet loss ratio "
::= { performParamEntry 2 }
performMaxDelay OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION " This indicates the maximum packet delay "
::= { performParamEntry 3 }
performDelayOverProb OBJECT-TYPE
SYNTAX RatioString
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION " This indicates the possibility that the packet
delay is bigger than the maximum delay allowed"
::= { performParamEntry 4 }
--===================================
--End of performParamTable
--===================================
vSConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSConfigEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Each row in this table describes a virtual switch
that has been created on this switch"
::= { vSConfig 1 }
vSConfigEntry OBJECT-TYPE
SYNTAX VSConfigEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "Describes a virtual switch"
PIB-INDEX { vSConfigVSID }
::= { vSConfigTable 1 }
VSConfigEntry ::=
SEQUENCE {
vSConfigVSID InstanceId,
vSAdminStatus INTEGER,
vSOperStatus INTEGER,
vSNumPorts INTEGER,
vSNumRoutingEntries INTEGER
}
vSConfigVSID OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Identifies the virtual switch within this switch"
::= { vSConfigEntry 1 }
vSAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The administrative state of the virtual switch. A
virtual switch's administrative status can not be
'up' until all the necessary parameters for this
virtual switch have been specified"
::={ vSConfigEntry 2 }
vSOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
PIB-ACCESS notify
STATUS current -- war vorher: mandatory
DESCRIPTION "The current operational state of the virtual
switch"
::={ vSConfigEntry 3 }
vSNumPorts OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The number of virtual ports in this virtual
switch"
::= {vSConfigEntry 4 }
vSNumRoutingEntries OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION
"The number of routing table entries allocated to
this virtual switch. This value is ignored if the
switch has only per port routing tables (i.e., no
switch-wide routing table)"
::= {vSConfigEntry 5 }
--===============================
-- END OF VSConfigTable
--===============================
vSCtrlConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSCtrlConfigEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per controller configured for
the VS"
::={vSConfig 2}
vSCtrlConfigEntry OBJECT-TYPE
SYNTAX VSCtrlConfigEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "Configuration for each controller for the VS"
PIB-INDEX { vSCtrlConfigVSID }
::= {vSCtrlConfigTable 1}
VSCtrlConfigEntry ::=
SEQUENCE {
vSCtrlConfigVSID InstanceId,
vSCtrlID INTEGER,
vSSciType INTEGER,
vSSciTransportType INTEGER,
vSSciTCPPortNumber INTEGER,
vSSciPortInterfaceNum INTEGER,
vSSciVpiNumber INTEGER,
vSSciVciNumber INTEGER
}
vSCtrlConfigVSID OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Identifies the virtual switch within this switch"
::= { vSCtrlConfigEntry 1 }
vSCtrlID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Identifies the virtual switch controller across
the SCI"
::= { vSCtrlConfigEntry 2 }
vSSciType OBJECT-TYPE
SYNTAX INTEGER {
gsmp(1),
megacop(2),
cops-pr(3)
}
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The switch control protocol used to control this
virtual switch"
::= { vSCtrlConfigEntry 3 }
vSSciTransportType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
tcp(2),
atm(3)
}
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Transport protocol used to transport SCI PDUs"
::= { vSCtrlConfigEntry 4 }
vSSciTCPPortNumber OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The local port number used to access the virtual
switch. Meaningful only when the transport type is
TCP"
::= { vSCtrlConfigEntry 5 }
vSSciPortInterfaceNum OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This is the physical interface over which control
messages are exchanged. "
::= { vSCtrlConfigEntry 6 }
vSSciVpiNumber OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The VPI on which the control messages are
exchanged. Meaningful only when the SCI transport
is ATM"
::= { vSCtrlConfigEntry 7 }
vSSciVciNumber OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The VCI on which the control messages are
exchanged. Meaningful only when the SCI transport
is ATM"
::= { vSCtrlConfigEntry 8 }
--===============================
--END OF VSCtrlConfigTable
--===============================
vSPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSPortConfigEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Resource configuration for the virtual ports"
::= { vSConfig 3 }
vSPortConfigEntry OBJECT-TYPE
SYNTAX VSPortConfigEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port resource configured
for the virtual switch"
PIB-INDEX { vSPortConfigVSID }
UNIQUENESS { vSPortConfigVSID, vSPortConfigPortID }
::= { vSPortConfigTable 1 }
VSPortConfigEntry ::=
SEQUENCE {
vSPortConfigVSID InstanceId,
vSPortConfigPortID INTEGER,
vSPhysicalPortNumber INTEGER,
vSPortConfigPortNumBWs INTEGER,
vSPortConfigNumLabelRanges INTEGER,
vSPortNumRoutingEntries INTEGER
}
vSPortConfigVSID OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This is the virtual switch ID of the virtual
switch"
::= { vSPortConfigEntry 1 }
vSPortConfigPortID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This is the virtual port id in the current virtual
switch"
::= { vSPortConfigEntry 2 }
vSPhysicalPortNumber OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The physical port number that is mapped to virtual
port"
::= { vSPortConfigEntry 3 }
vSPortConfigPortNumBWs OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Number of equivalent bandwidth pointing to
different performance targets (packet loss ratio
and delay) in both incoming and outgoing directions
for this port."
::= { vSPortConfigEntry 4 }
vSPortConfigNumLabelRanges OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Number of label ranges for this port. The label
can be of different types depending on the
interface service type."
::= { vSPortConfigEntry 5}
vSPortNumRoutingEntries OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The number of routing table entries allocated to
this virtual port from the physical port. This
value is used only if the switch has per port
routing tables"
::= {vSPortConfigEntry 6 }
--================================
-- END OF VSPortConfigTable
--================================
--
--================================================================
-- The table VSConfigBWTable gives the equivalent bandwidth
--pointing to different service category for input and output at
--the virtual ports. The table has 3 indices; virtual switch ID,
--port ID and Bandwidth ID
--================================================================
vSPortConfigBWTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSPortConfigBWEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured bandwidth information
for the various virtual ports"
::= { vSConfig 4 }
vSPortConfigBWEntry OBJECT-TYPE
SYNTAX VSPortConfigBWEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the configured bandwidth
information for the various virtual ports"
PIB-INDEX { vSPortConfigBWVSID }
UNIQUENESS { vSPortConfigBWVSID,
vSPortConfigBWPortID,
vSPortConfigBWID }
::= { vSPortConfigBWTable 1 }
VSPortConfigBWEntry ::=
SEQUENCE {
vSPortConfigBWVSID InstanceId,
vSPortConfigBWPortID INTEGER,
vSPortConfigBWID INTEGER,
vSPortConfigEqiBW INTEGER,
vSPortConfigIndex OBJECT IDENTIFIER,
vSPortConfigBWPortDirection PortDirection
}
vSPortConfigBWVSID OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This is the virtual switch ID of the virtual
switch"
::= { vSPortConfigBWEntry 1 }
vSPortConfigBWPortID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This is the virtual port id in the current virtual
switch"
::= { vSPortConfigBWEntry 2 }
vSPortConfigBWID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "This is the equivalent bandwidth ID in the current
virtual switch"
::= { vSPortConfigBWEntry 3 }
vSPortConfigEqiBW OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the equivalent bandwidth assigned
to this VS "
::= { vSPortConfigBWEntry 4 }
vSPortConfigIndex OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION " Indicates an entry in the performParamTable
which represents the performance target
associated to by this equivalent bandwidth "
::= { vSPortConfigBWEntry 5 }
vSPortConfigBWPortDirection OBJECT-TYPE
SYNTAX PortDirection
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the direction for which this equivalent
bandwidth is valid"
::= { vSPortConfigBWEntry 6 }
--==================================
-- END OF VSPortConfigBWTable
--==================================
--
--================================================================
-- The VSLabelRangeConfigTable gives the label ranges for input
-- and output at the virtual ports.
-- The tables have 3 indices; virtual switch ID, port ID and Range
-- ID
--================================================================
vSPortConfigLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSPortConfigLabelRangeEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured label range
information for the various virtual ports"
::= { vSConfig 5 }
vSPortConfigLabelRangeEntry OBJECT-TYPE
SYNTAX VSPortConfigLabelRangeEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port label ranges
configured for the virtual switch."
PIB-INDEX { vSPortConfigLabelRangeID }
UNIQUENESS {
vSPortConfigLabelRangeID }
::= { vSPortConfigLabelRangeTable 1 }
VSPortConfigLabelRangeEntry ::=
SEQUENCE {
vSPortConfigLabelRangeID InstanceId,
vSPortConfigPortDirection PortDirection,
vSPortConfigLabelRangeType INTEGER,
vSPortConfigLabelRangeIndex INTEGER
}
vSPortConfigLabelRangeID OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Identifies the label range"
::= { vSPortConfigLabelRangeEntry 1 }
vSPortConfigPortDirection OBJECT-TYPE
SYNTAX PortDirection
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the direction for which this range is
valid"
::= { vSPortConfigLabelRangeEntry 2 }
vSPortConfigLabelRangeType OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the type of protocol for this label
range."
::= { vSPortConfigLabelRangeEntry 3 }
vSPortConfigLabelRangeIndex OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "The index into the protocol-dependent label
range table for this virtual switch."
::= { vSPortConfigLabelRangeEntry 4 }
--====================================
-- END OF VSPortConfigLabelRangeTable
--====================================
--
--================================================================
-- The table VSAtmLabelRangeTable is used to give the VPI/VCI
-- label ranges at the ATM virtual switch level.
--================================================================
vSAtmLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSAtmLabelRangeEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured ATM label range
information for the various switch ports on this
virtual switch."
::= { vSConfig 6 }
vSAtmLabelRangeEntry OBJECT-TYPE
SYNTAX VSAtmLabelRangeEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port ATM label ranges and
capabilities."
PIB-INDEX { vSAtmLabelRangeIndex }
::= { vSAtmLabelRangeTable 1 }
VSAtmLabelRangeEntry ::=
SEQUENCE {
vSAtmLabelRangeIndex InstanceId,
vSAtmLabelRangeMinVpiVci VectorString,
vSAtmLabelRangeMaxVpiVci VectorString,
vSAtmLabelRangeAllowsVP TruthValue,
vSAtmLabelRangeAllowsP2MP TruthValue,
vSAtmLabelRangeAllowsMP2P TruthValue,
vSAtmLabelRangeMaxMulticast INTEGER
}
vSAtmLabelRangeIndex OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Index into this table."
::= { vSAtmLabelRangeEntry 1 }
vSAtmLabelRangeMinVpiVci OBJECT-TYPE
SYNTAX VectorString
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Lower bound of the vpi and vci range."
::= { vSAtmLabelRangeEntry 2 }
vSAtmLabelRangeMaxVpiVci OBJECT-TYPE
SYNTAX VectorString
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Upper bound of the vpi and vci range."
::= { vSAtmLabelRangeEntry 3 }
vSAtmLabelRangeAllowsVP OBJECT-TYPE
SYNTAX TruthValue
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates whether this label range can be used for
VP connections."
::= { vSAtmLabelRangeEntry 4 }
vSAtmLabelRangeAllowsP2MP OBJECT-TYPE
SYNTAX TruthValue
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates whether this label range can be used to
create point-to-multipoint connections."
::= { vSAtmLabelRangeEntry 5 }
vSAtmLabelRangeAllowsMP2P OBJECT-TYPE
SYNTAX TruthValue
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates whether this label range can be used to
create multipoint-to-point connections."
::= { vSAtmLabelRangeEntry 6 }
vSAtmLabelRangeMaxMulticast OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the maximum number of multicast
connections that can be created within this range."
::= { vSAtmLabelRangeEntry 7 }
--====================================
-- END OF VSAtmLabelRangeTable
--====================================
--
--================================================================
-- The table VSFrLabelRangeTable is used to give the DLCI label
-- ranges on a Frame Relay interface for a virtual switch.
--================================================================
vSFrLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSFrLabelRangeEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured label range
information for the various frame relay ports."
::= { vSConfig 7 }
vSFrLabelRangeEntry OBJECT-TYPE
SYNTAX VSFrLabelRangeEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port label ranges"
PIB-INDEX { vSFrLabelRangeIndex }
::= { vSFrLabelRangeTable 1 }
VSFrLabelRangeEntry ::=
SEQUENCE {
vSFrLabelRangeIndex InstanceId,
vSFrLabelRangeMinDLCI INTEGER,
vSFrLabelRangeMaxDLCI INTEGER
}
vSFrLabelRangeIndex OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Index into this table."
::= { vSFrLabelRangeEntry 1 }
vSFrLabelRangeMinDLCI OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Lower bound of the DLCI range for this Frame Relay
interface."
::= { vSFrLabelRangeEntry 2 }
vSFrLabelRangeMaxDLCI OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Upper bound of the DLCI range for this Frame Relay
interface."
::= { vSFrLabelRangeEntry 3 }
--====================================
-- END OF VSFrLabelRangeTable
--====================================
--
--================================================================
-- The table VSVlanLabelRangeTable is used to give the VLAN ID
-- label ranges on a VLAN-aware Ethernet interface for a virtual
-- switch.
--================================================================
vSVlanLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSVlanLabelRangeEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured label range
information for the VLAN-aware Ethernet ports."
::= { vSConfig 8 }
vSVlanLabelRangeEntry OBJECT-TYPE
SYNTAX VSVlanLabelRangeEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port VLAN ID ranges"
PIB-INDEX { vSVlanLabelRangeIndex }
::= { vSVlanLabelRangeTable 1 }
VSVlanLabelRangeEntry ::=
SEQUENCE {
vSVlanLabelRangeIndex InstanceId,
vSVlanLabelRangeMinID INTEGER,
vSVlanLabelRangeMaxID INTEGER
}
vSVlanLabelRangeIndex OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Index into this table."
::= { vSVlanLabelRangeEntry 1 }
vSVlanLabelRangeMinID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Lower bound of the VLAN ID range on this VLAN-
aware Ethernet switch interface."
::= { vSVlanLabelRangeEntry 2 }
vSVlanLabelRangeMaxID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Upper bound of the VLAN ID range on this VLAN-
aware Ethernet switch interface."
::= { vSVlanLabelRangeEntry 3 }
--====================================
-- END OF VSVlanLabelRangeTable
--====================================
--
--================================================================
-- The table mplsLabelRangeTable is used to give the label ranges
-- on a MPLS interface.
--================================================================
vSMplsLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSMplsLabelRangeEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured label range
information for MPLS ports."
::= { vSConfig 9 }
vSMplsLabelRangeEntry OBJECT-TYPE
SYNTAX VSMplsLabelRangeEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port MPLS ranges."
PIB-INDEX { vSMplsLabelRangeIndex }
::= { vSMplsLabelRangeTable 1 }
VSMplsLabelRangeEntry ::=
SEQUENCE {
vSMplsLabelRangeIndex InstanceId,
vSMplsLabelRangeMinID INTEGER,
vSMplsLabelRangeMaxID INTEGER
}
vSMplsLabelRangeIndex OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Index into this table."
::= { vSMplsLabelRangeEntry 1 }
vSMplsLabelRangeMinID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Lower bound of the MPLS label range."
::= { vSMplsLabelRangeEntry 2 }
vSMplsLabelRangeMaxID OBJECT-TYPE
SYNTAX INTEGER
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Upper bound of the MPLS label range."
::= { vSMplsLabelRangeEntry 3 }
--====================================
-- END OF VSMplsLabelRangeTable
--====================================
--================================================================
-- The table VSIpLabelRangeTable is used to give the IP ranges on
-- an IP interface for a virtual switch.
--================================================================
vSIpLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VSIpLabelRangeEntry
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Table giving the configured IP ranges for IP
ports."
::= { vSConfig 10 }
vSIpLabelRangeEntry OBJECT-TYPE
SYNTAX VSIpLabelRangeEntry
STATUS current -- war vorher: mandatory
DESCRIPTION "This table gives the per port IP ranges."
PIB-INDEX { vSIpLabelRangeIndex }
::= { vSIpLabelRangeTable 1 }
VSIpLabelRangeEntry ::=
SEQUENCE {
vSIpLabelRangeIndex InstanceId,
vSIpLabelRangeIP InetAddress,
vSIpLabelRangeIPMask InetAddress
}
vSIpLabelRangeIndex OBJECT-TYPE
SYNTAX InstanceId
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Index into this table."
::= { vSIpLabelRangeEntry 1 }
vSIpLabelRangeIP OBJECT-TYPE
SYNTAX InetAddress
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the IP address for a particular network."
::= { vSIpLabelRangeEntry 2 }
vSIpLabelRangeIPMask OBJECT-TYPE
SYNTAX InetAddress
PIB-ACCESS install
STATUS current -- war vorher: mandatory
DESCRIPTION "Indicates the subnet's mask address."
::= { vSIpLabelRangeEntry 3 }
--====================================
-- END OF VSIpLabelRangeTable
--====================================
END