PARTITION-PIB PIB-DEFINITIONS ::= BEGIN 

IMPORTS 

    ibrpib

            FROM TUBS-SMI

    Unsigned32, Integer32, 

    MODULE-IDENTITY, OBJECT-TYPE, TEXTUAL-CONVENTION

            FROM COPS-PR-SPPI

    InstanceId 

            FROM COPS-PR-SPPI-TC

    TruthValue

            FROM SNMPv2-TC

    InetAddress

            FROM INET-ADDRESS-MIB;

switchPartitionPib  MODULE-IDENTITY 

    SUBJECT-CATEGORIES { all } 

    LAST-UPDATED "200201010000Z"  -- modified

    ORGANIZATION "IETF" 

    CONTACT-INFO " 

          Todd A. Anderson 

          Intel 

          2111 NE 25th Avenue 

          Hillsboro, OR 97124 USA 

          Phone: +1 503 712 1760 

          Email: todd.a.anderson@intel.com 

          Avri Doria 

          Nortel Networks 

          600 Technology Park Drive 

          Billerica  MA 01821 

          Phone: +1 401 663 5024 

          Email: avri@nortelnetworks.com 

          Jiang Yong 

          Telia Research AB 

          123 86 Farsta 

          Sweden 

          Phone: +46 (0) 8 713 81 25 

          Email: yong.b.jiang@telia.se 

          Jerry Sydir                     

          CPlane Inc.                     

          5150 El Camino Real Suite B-31 

          Los Altos, CA 94022 

          Phone: +1(650) 938-8066 x102 

          sydir@cplane.com 

          Balaji Srinivasan                     

          CPlane Inc.                     

          5150 El Camino Real Suite B-31 

          Los Altos, CA 94022 

          phone: +1(650) 938-8066 x103 

          balaji@cplane.com" 

    DESCRIPTION 

"The PIB module specifies a set of policy rule classes  

for partitioning a single switch into a set of virtual  

switches." 

    ::= { ibrpib 19 } 

vSConfig  OBJECT IDENTIFIER ::= { switchPartitionPib 1 } 

PortDirection ::= TEXTUAL-CONVENTION 

    STATUS        current 

    DESCRIPTION 

      "The following type is used to specify the direction of the 

      label ranges and the bandwidth in the physical port of the  

      switch as well as  the virtual port of the virtual switch." 

    SYNTAX  INTEGER { 

        incoming(1), 

        outgoing(2) 

    } 

RatioString ::= TEXTUAL-CONVENTION 

   STATUS       current 

   DESCRIPTION 

     "This data type is used to model a floating number,  

     specifically here the cell loss ratio and a  

     probability number. It is required to be of the form  

     m:n, where m and n are both integers and represent a  

     floating number m divided by n." 

   SYNTAX       OCTET STRING (SIZE(3)) 

VectorString ::= TEXTUAL-CONVENTION 

   STATUS       current 

   DESCRIPTION 

     "This data type is used to model a 2-dimentional  

     number (x,y). Here it is used to specify the vpi/vci  

     range for an ATM interface. 2 vectors, (minVpi,  

     minVci) and (maxVpi, maxVci), make up a label range.  

     It is required to have the format x:y" 

   SYNTAX       OCTET STRING (SIZE(3..8)) 

PortType ::= TEXTUAL-CONVENTION 

        STATUS          current 

        DESCRIPTION  

          "This data type is used to model the port type of the  

          switch" 

        SYNTAX          INTEGER { 

          atm(1), 

          frameRelay(2), 

          ethernetSwitch(3), 

          mpls(4), 

          ipRouting(5) 

        } 

-- 

--================================================================ 

--This table performParamTable is used to represent the 

--performance targets associated with the equivalent bandwidths  

--for each port. This table allows the bandwidth, buffer space,  

--and queue schedulers assigned to a VS to be  simply abstracted  

--using a single parameter: the Equivalent bandwidth per port 

--assigned to the VS. Each entry in the VS interface bandwidth  

--table uses its serviceParamIndex to point to a row in this  

--table. Then the equivalent bandwidth points to a performance  

--target set by the service descriptor parameters. The performance  

--target is most common in the form of a loss target but also a  

--delay target can be used.  

--================================================================ 

performParamTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF PerformParamEntry 

   PIB-ACCESS install

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured performance targets  

               for this switch" 

   ::= { switchPartitionPib 2 } 

performParamEntry OBJECT-TYPE 

   SYNTAX PerformParamEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives each performance target  

               parameters" 

   PIB-INDEX { performParamIndex } 

   ::= { performParamTable 1 } 

PerformParamEntry ::= 

   SEQUENCE { 

      performParamIndex       InstanceId, 

      performPLR              RatioString, 

      performMaxDelay         INTEGER, 

      performDelayOverProb    RatioString 

   } 

performParamIndex OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Identifies each performance target" 

   ::= { performParamEntry 1 } 

performPLR OBJECT-TYPE 

   SYNTAX RatioString 

   PIB-ACCESS install

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This indicates the packet loss ratio " 

   ::= { performParamEntry 2 } 

performMaxDelay OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install

   STATUS current -- war vorher: mandatory 

   DESCRIPTION " This indicates the maximum packet delay " 

   ::= { performParamEntry 3 } 

performDelayOverProb OBJECT-TYPE 

   SYNTAX RatioString 

   PIB-ACCESS install

   STATUS current -- war vorher: mandatory 

   DESCRIPTION " This indicates the possibility that the packet   

               delay is bigger than the maximum delay allowed" 

   ::= { performParamEntry 4 } 

--=================================== 

--End of performParamTable 

--=================================== 

vSConfigTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSConfigEntry 

   PIB-ACCESS install

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Each row in this table describes a virtual switch  

               that has been created on this switch" 

   ::= { vSConfig 1 } 

vSConfigEntry OBJECT-TYPE 

   SYNTAX VSConfigEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Describes a virtual switch" 

   PIB-INDEX { vSConfigVSID } 

   ::= { vSConfigTable 1 } 

VSConfigEntry ::=  

   SEQUENCE { 

      vSConfigVSID              InstanceId, 

      vSAdminStatus             INTEGER, 

      vSOperStatus              INTEGER, 

      vSNumPorts                INTEGER, 

      vSNumRoutingEntries       INTEGER 

} 

vSConfigVSID OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Identifies the virtual switch within this switch" 

   ::= { vSConfigEntry 1 } 

vSAdminStatus OBJECT-TYPE 

   SYNTAX INTEGER { 

             up(1), 

             down(2), 

             testing(3) 

   } 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The administrative state of the virtual switch. A 

                virtual switch's administrative status can not be  

                'up' until all the necessary parameters for this  

                virtual switch have been specified" 

   ::={ vSConfigEntry 2 } 

vSOperStatus OBJECT-TYPE 

   SYNTAX INTEGER { 

             up(1), 

             down(2) 

          } 

   PIB-ACCESS notify

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The current operational state of the virtual  

               switch" 

   ::={ vSConfigEntry 3 } 

vSNumPorts OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The number of virtual ports in this virtual  

               switch" 

   ::= {vSConfigEntry 4 } 

vSNumRoutingEntries OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION  

     "The number of routing table entries allocated to  

     this virtual switch.  This value is ignored if the  

     switch has only per port routing tables (i.e., no  

     switch-wide routing table)" 

   ::= {vSConfigEntry 5 } 

--=============================== 

-- END OF VSConfigTable 

--=============================== 

vSCtrlConfigTable OBJECT-TYPE 

  SYNTAX SEQUENCE OF VSCtrlConfigEntry 

  PIB-ACCESS install 

  STATUS current -- war vorher: mandatory 

  DESCRIPTION "This table gives the per controller configured for  

              the VS" 

  ::={vSConfig 2} 

vSCtrlConfigEntry OBJECT-TYPE 

  SYNTAX VSCtrlConfigEntry 

  STATUS current -- war vorher: mandatory 

  DESCRIPTION "Configuration for each controller for the VS" 

  PIB-INDEX { vSCtrlConfigVSID } 

  ::= {vSCtrlConfigTable 1} 

VSCtrlConfigEntry ::= 

  SEQUENCE { 

      vSCtrlConfigVSID            InstanceId, 

      vSCtrlID                    INTEGER, 

      vSSciType                   INTEGER, 

      vSSciTransportType          INTEGER, 

      vSSciTCPPortNumber          INTEGER, 

      vSSciPortInterfaceNum       INTEGER, 

      vSSciVpiNumber              INTEGER, 

      vSSciVciNumber              INTEGER 

} 

vSCtrlConfigVSID OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Identifies the virtual switch within this switch" 

   ::= { vSCtrlConfigEntry 1 } 

vSCtrlID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Identifies the virtual switch controller across  

               the SCI" 

   ::= { vSCtrlConfigEntry 2 } 

vSSciType OBJECT-TYPE 

   SYNTAX INTEGER { 

            gsmp(1), 

            megacop(2), 

            cops-pr(3) 

          } 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The switch control protocol used to control this 

                virtual switch" 

   ::= { vSCtrlConfigEntry 3 } 

vSSciTransportType OBJECT-TYPE 

   SYNTAX INTEGER { 

       ethernet(1), 

       tcp(2), 

       atm(3) 

   } 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Transport protocol used to transport SCI PDUs" 

   ::= { vSCtrlConfigEntry 4 } 

vSSciTCPPortNumber OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The local port number used to access the virtual  

               switch. Meaningful only when the transport type is  

               TCP" 

   ::= { vSCtrlConfigEntry 5 } 

vSSciPortInterfaceNum OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This is the physical interface over which control 

                messages are exchanged. " 

   ::= { vSCtrlConfigEntry 6 } 

vSSciVpiNumber OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The VPI on which the control messages are  

               exchanged. Meaningful only when the SCI transport  

               is ATM" 

   ::= { vSCtrlConfigEntry 7 } 

vSSciVciNumber OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The VCI on which the control messages are  

               exchanged. Meaningful only when the SCI transport  

               is ATM" 

   ::= { vSCtrlConfigEntry 8 } 

--=============================== 

--END OF VSCtrlConfigTable 

--=============================== 

vSPortConfigTable OBJECT-TYPE 

   SYNTAX    SEQUENCE OF VSPortConfigEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory

   DESCRIPTION "Resource configuration for the virtual ports" 

   ::= { vSConfig 3 } 

vSPortConfigEntry OBJECT-TYPE 

   SYNTAX VSPortConfigEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the per port resource configured  

               for the virtual switch" 

   PIB-INDEX { vSPortConfigVSID } 

   UNIQUENESS { vSPortConfigVSID, vSPortConfigPortID } 

   ::= { vSPortConfigTable 1 } 

VSPortConfigEntry ::= 

   SEQUENCE { 

      vSPortConfigVSID             InstanceId, 

      vSPortConfigPortID           INTEGER, 

      vSPhysicalPortNumber         INTEGER, 

      vSPortConfigPortNumBWs       INTEGER, 

      vSPortConfigNumLabelRanges   INTEGER, 

      vSPortNumRoutingEntries      INTEGER 

} 

vSPortConfigVSID OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This is the virtual switch ID of the virtual  

               switch" 

   ::= { vSPortConfigEntry 1 } 

vSPortConfigPortID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This is the virtual port id in the current virtual          

               switch" 

   ::= { vSPortConfigEntry 2 } 

vSPhysicalPortNumber OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The physical port number that is mapped to virtual  

               port" 

   ::= { vSPortConfigEntry 3 } 

vSPortConfigPortNumBWs OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Number of equivalent bandwidth pointing to  

               different performance targets (packet loss ratio  

               and delay) in both incoming and outgoing directions  

               for this port." 

   ::= { vSPortConfigEntry 4 } 

vSPortConfigNumLabelRanges OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Number of label ranges for this port. The label  

               can be of different types depending on the  

               interface service type." 

   ::= { vSPortConfigEntry 5} 

vSPortNumRoutingEntries OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The number of routing table entries allocated to   

               this virtual port from the physical port.  This  

               value is used only if the switch has per port  

               routing tables" 

   ::= {vSPortConfigEntry 6 } 

--================================ 

-- END OF VSPortConfigTable  

--================================ 

-- 

--================================================================ 

-- The table VSConfigBWTable gives the equivalent bandwidth  

--pointing to different service category for input and output at  

--the virtual ports. The table has 3 indices; virtual switch ID,  

--port ID and Bandwidth ID 

--================================================================ 

vSPortConfigBWTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSPortConfigBWEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured bandwidth information  

                for the various virtual ports" 

   ::= { vSConfig 4 } 

vSPortConfigBWEntry OBJECT-TYPE 

   SYNTAX VSPortConfigBWEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the configured bandwidth  

               information for the various virtual ports" 

   PIB-INDEX { vSPortConfigBWVSID } 

   UNIQUENESS { vSPortConfigBWVSID, 

                vSPortConfigBWPortID, 

                vSPortConfigBWID } 

   ::= { vSPortConfigBWTable 1 } 

VSPortConfigBWEntry ::= 

   SEQUENCE { 

      vSPortConfigBWVSID               InstanceId, 

      vSPortConfigBWPortID             INTEGER, 

      vSPortConfigBWID                 INTEGER, 

      vSPortConfigEqiBW                INTEGER, 

      vSPortConfigIndex                OBJECT IDENTIFIER, 

      vSPortConfigBWPortDirection      PortDirection 

} 

vSPortConfigBWVSID OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This is the virtual switch ID of the virtual  

               switch" 

   ::= { vSPortConfigBWEntry 1 } 

vSPortConfigBWPortID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This is the virtual port id in the current virtual  

               switch" 

   ::= { vSPortConfigBWEntry 2 } 

vSPortConfigBWID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This is the equivalent bandwidth ID in the current 

                virtual switch" 

   ::= { vSPortConfigBWEntry 3 } 

vSPortConfigEqiBW OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates the equivalent bandwidth assigned 

                to this VS " 

   ::= { vSPortConfigBWEntry 4 } 

vSPortConfigIndex OBJECT-TYPE 

   SYNTAX OBJECT IDENTIFIER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION " Indicates an entry in the performParamTable 

                 which represents the performance target 

                 associated to by this equivalent bandwidth " 

   ::= { vSPortConfigBWEntry 5 } 

vSPortConfigBWPortDirection OBJECT-TYPE 

   SYNTAX PortDirection 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates the direction for which this equivalent 

                bandwidth is valid" 

   ::= { vSPortConfigBWEntry 6 } 

--================================== 

-- END OF VSPortConfigBWTable  

--================================== 

-- 

--================================================================ 

-- The VSLabelRangeConfigTable gives the label ranges for input  

-- and output at the virtual ports. 

-- The tables have 3 indices; virtual switch ID, port ID and Range  

-- ID 

--================================================================ 

vSPortConfigLabelRangeTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSPortConfigLabelRangeEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured label range  

               information for the various virtual ports" 

   ::= { vSConfig 5 } 

vSPortConfigLabelRangeEntry OBJECT-TYPE 

   SYNTAX VSPortConfigLabelRangeEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the per port label ranges  

               configured for the virtual switch." 

   PIB-INDEX { vSPortConfigLabelRangeID } 

   UNIQUENESS { 

                vSPortConfigLabelRangeID } 

   ::= { vSPortConfigLabelRangeTable 1 } 

VSPortConfigLabelRangeEntry ::= 

   SEQUENCE { 

      vSPortConfigLabelRangeID          InstanceId, 

      vSPortConfigPortDirection         PortDirection, 

      vSPortConfigLabelRangeType        INTEGER, 

      vSPortConfigLabelRangeIndex       INTEGER 

}  

vSPortConfigLabelRangeID OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Identifies the label range" 

   ::= { vSPortConfigLabelRangeEntry 1 } 

vSPortConfigPortDirection OBJECT-TYPE 

   SYNTAX PortDirection 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates the direction for which this range is  

               valid" 

   ::= { vSPortConfigLabelRangeEntry 2 } 

vSPortConfigLabelRangeType OBJECT-TYPE 

   SYNTAX INTEGER  

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates the type of protocol for this label  

               range." 

   ::= { vSPortConfigLabelRangeEntry 3 } 

vSPortConfigLabelRangeIndex OBJECT-TYPE 

   SYNTAX INTEGER  

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "The index into the protocol-dependent label  

                range table for this virtual switch." 

   ::= { vSPortConfigLabelRangeEntry 4 } 

--==================================== 

-- END OF VSPortConfigLabelRangeTable   

--==================================== 

-- 

--================================================================ 

-- The table VSAtmLabelRangeTable is used to give the VPI/VCI 

-- label ranges at the ATM virtual switch level.  

--================================================================ 

vSAtmLabelRangeTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSAtmLabelRangeEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured ATM label range  

               information for the various switch ports on this  

               virtual switch." 

   ::= { vSConfig 6 } 

vSAtmLabelRangeEntry OBJECT-TYPE 

   SYNTAX VSAtmLabelRangeEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the per port ATM label ranges and 

                capabilities." 

   PIB-INDEX { vSAtmLabelRangeIndex } 

   ::= { vSAtmLabelRangeTable 1 } 

VSAtmLabelRangeEntry ::= 

   SEQUENCE { 

      vSAtmLabelRangeIndex              InstanceId, 

      vSAtmLabelRangeMinVpiVci          VectorString, 

      vSAtmLabelRangeMaxVpiVci          VectorString, 

      vSAtmLabelRangeAllowsVP           TruthValue, 

      vSAtmLabelRangeAllowsP2MP         TruthValue, 

      vSAtmLabelRangeAllowsMP2P         TruthValue, 

      vSAtmLabelRangeMaxMulticast       INTEGER 

} 

vSAtmLabelRangeIndex OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Index into this table." 

   ::= { vSAtmLabelRangeEntry 1 } 

vSAtmLabelRangeMinVpiVci OBJECT-TYPE 

   SYNTAX VectorString 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Lower bound of the vpi and vci range." 

   ::= { vSAtmLabelRangeEntry 2 } 

vSAtmLabelRangeMaxVpiVci OBJECT-TYPE 

   SYNTAX VectorString 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Upper bound of the vpi and vci range." 

   ::= { vSAtmLabelRangeEntry 3 } 

vSAtmLabelRangeAllowsVP OBJECT-TYPE 

   SYNTAX TruthValue 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates whether this label range can be used for  

               VP connections." 

   ::= { vSAtmLabelRangeEntry 4 } 

vSAtmLabelRangeAllowsP2MP OBJECT-TYPE 

   SYNTAX TruthValue 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates whether this label range can be used to  

               create point-to-multipoint connections." 

   ::= { vSAtmLabelRangeEntry 5 } 

vSAtmLabelRangeAllowsMP2P OBJECT-TYPE 

   SYNTAX TruthValue 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates whether this label range can be used to  

               create multipoint-to-point connections." 

   ::= { vSAtmLabelRangeEntry 6 } 

vSAtmLabelRangeMaxMulticast OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Indicates the maximum number of multicast  

               connections that can be created within this range." 

   ::= { vSAtmLabelRangeEntry 7 } 

--==================================== 

-- END OF VSAtmLabelRangeTable   

--==================================== 

-- 

--================================================================ 

-- The table VSFrLabelRangeTable is used to give the DLCI label  

-- ranges on a Frame Relay interface for a virtual switch. 

--================================================================ 

vSFrLabelRangeTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSFrLabelRangeEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured label range  

               information for the various frame relay ports." 

   ::= { vSConfig 7 } 

vSFrLabelRangeEntry OBJECT-TYPE 

   SYNTAX VSFrLabelRangeEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the per port label ranges" 

   PIB-INDEX { vSFrLabelRangeIndex } 

   ::= { vSFrLabelRangeTable 1 } 

VSFrLabelRangeEntry ::= 

   SEQUENCE { 

      vSFrLabelRangeIndex             InstanceId, 

      vSFrLabelRangeMinDLCI           INTEGER, 

      vSFrLabelRangeMaxDLCI           INTEGER 

} 

vSFrLabelRangeIndex OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Index into this table." 

   ::= { vSFrLabelRangeEntry 1 } 

vSFrLabelRangeMinDLCI OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Lower bound of the DLCI range for this Frame Relay  

                interface." 

   ::= { vSFrLabelRangeEntry 2 } 

vSFrLabelRangeMaxDLCI OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Upper bound of the DLCI range for this Frame Relay 

                interface." 

   ::= { vSFrLabelRangeEntry 3 } 

--==================================== 

-- END OF VSFrLabelRangeTable   

--==================================== 

-- 

--================================================================ 

-- The table VSVlanLabelRangeTable is used to give the VLAN ID  

-- label ranges on a VLAN-aware Ethernet interface for a virtual  

-- switch. 

--================================================================ 

vSVlanLabelRangeTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSVlanLabelRangeEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured label range  

               information for the VLAN-aware Ethernet ports." 

   ::= { vSConfig 8 } 

vSVlanLabelRangeEntry OBJECT-TYPE 

   SYNTAX VSVlanLabelRangeEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the per port VLAN ID ranges" 

   PIB-INDEX { vSVlanLabelRangeIndex } 

   ::= { vSVlanLabelRangeTable 1 } 

VSVlanLabelRangeEntry ::= 

   SEQUENCE { 

      vSVlanLabelRangeIndex           InstanceId, 

      vSVlanLabelRangeMinID           INTEGER, 

      vSVlanLabelRangeMaxID           INTEGER 

} 

vSVlanLabelRangeIndex OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Index into this table." 

   ::= { vSVlanLabelRangeEntry 1 } 

vSVlanLabelRangeMinID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Lower bound of the VLAN ID range on this VLAN- 

               aware Ethernet switch interface." 

   ::= { vSVlanLabelRangeEntry 2 } 

vSVlanLabelRangeMaxID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Upper bound of the VLAN ID range on this VLAN-     

               aware Ethernet switch interface." 

   ::= { vSVlanLabelRangeEntry 3 } 

--==================================== 

-- END OF VSVlanLabelRangeTable   

--==================================== 

-- 

--================================================================ 

-- The table mplsLabelRangeTable is used to give the label ranges 

-- on a MPLS interface. 

--================================================================ 

vSMplsLabelRangeTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSMplsLabelRangeEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured label range  

               information for MPLS ports." 

   ::= { vSConfig 9 } 

vSMplsLabelRangeEntry OBJECT-TYPE 

   SYNTAX VSMplsLabelRangeEntry 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "This table gives the per port MPLS ranges." 

   PIB-INDEX { vSMplsLabelRangeIndex } 

   ::= { vSMplsLabelRangeTable 1 } 

VSMplsLabelRangeEntry ::= 

   SEQUENCE { 

      vSMplsLabelRangeIndex           InstanceId, 

      vSMplsLabelRangeMinID           INTEGER, 

      vSMplsLabelRangeMaxID           INTEGER 

} 

vSMplsLabelRangeIndex OBJECT-TYPE 

   SYNTAX InstanceId 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Index into this table." 

   ::= { vSMplsLabelRangeEntry 1 } 

vSMplsLabelRangeMinID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Lower bound of the MPLS label range." 

   ::= { vSMplsLabelRangeEntry 2 } 

vSMplsLabelRangeMaxID OBJECT-TYPE 

   SYNTAX INTEGER 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Upper bound of the MPLS label range." 

   ::= { vSMplsLabelRangeEntry 3 } 

--==================================== 

-- END OF VSMplsLabelRangeTable   

--==================================== 

--================================================================ 

-- The table VSIpLabelRangeTable is used to give the IP ranges on  

-- an IP interface for a virtual switch. 

--================================================================ 

vSIpLabelRangeTable OBJECT-TYPE 

   SYNTAX SEQUENCE OF VSIpLabelRangeEntry 

   PIB-ACCESS install 

   STATUS current -- war vorher: mandatory 

   DESCRIPTION "Table giving the configured IP ranges for IP  

               ports." 

   ::= { vSConfig 10 } 

vSIpLabelRangeEntry OBJECT-TYPE 

   SYNTAX VSIpLabelRangeEntry 

   STATUS current -- war vorher: mandatory