#!/bin/sh
#set -x
#//%LICENSE////////////////////////////////////////////////////////////////
#//
#// Licensed to The Open Group (TOG) under one or more contributor license
#// agreements. Refer to the OpenPegasusNOTICE.txt file distributed with
#// this work for additional information regarding copyright ownership.
#// Each contributor licenses this file to you under the OpenPegasus Open
#// Source License; you may not use this file except in compliance with the
#// License.
#//
#// Permission is hereby granted, free of charge, to any person obtaining a
#// copy of this software and associated documentation files (the "Software"),
#// to deal in the Software without restriction, including without limitation
#// the rights to use, copy, modify, merge, publish, distribute, sublicense,
#// and/or sell copies of the Software, and to permit persons to whom the
#// Software is furnished to do so, subject to the following conditions:
#//
#// The above copyright notice and this permission notice shall be included
#// in all copies or substantial portions of the Software.
#//
#// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
#// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
#// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
#// IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
#// CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
#// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
#// SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#//
#//////////////////////////////////////////////////////////////////////////
##==============================================================================
##
## Check for existence of pegasus config.mak. If this does not exist, it means
## that the distribution is incomplete or that the configure file has been run
## from the wrong directory.
##
##==============================================================================
tiny=0
prefix=""
test_option=0
disable_tests=0
disable_tests=0
interop_name=""
enable_pertinst=0
dis_wsman=0
config=mak/config.mak
echo ===================
echo WARNING: This script is experimental and has known problems. Please
echo use it at your own risk and review the results carefully in the \
echo options.mak file that it creates. Until this script is completed
echo the traditional OpenPegasus build configuration through environment
echo variables will remain in place and is the prefered setup tool
echo ===================
if [ ! -f "$config" ]; then
echo "$0: Error: ./configure must be run from root of Pegasus distribution."
echo
exit 1
fi
##==============================================================================
##
## Collection command line options.
##
##==============================================================================
help=
for opt
do
optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
case $opt in
-h | --help)
help=1
;;
--prefix=*)
prefix=$optarg
;;
--test)
test_option=1
;;
--tiny)
tiny=1
disable_trace=1
disable_tests=1
interop_name=interop
enable_perinst=1
;;
--flavor=*)
flavor=$optarg
;;
--disable-wsman)
dis_wsman=1
;;
*)
echo "$0: unknown option: $opt"
exit 1
;;
esac
done
##==============================================================================
##
## Print help message if --help given on command line.
##
##==============================================================================
if [ "$help" = "1" ]; then
cat<<END
Usage: ./configure [OPTION]...
Configures OpenPegasus build options.
WARNING: This script is experimental and has known problems. Please
use it at your own risk and review the results carefully in the
options.mak file that it creates.Until this script is completed
the traditional OpenPegasus build configuration through environment
variables will remain in place and is the prefered setup tool
Configure examples.
$ ./configure
$ make
Options:
--help
Print this help message.
--prefix=DIR
Install under DIR
--test
Build with test options included.
--tiny
Build tiny version of pegasus with support to SSL,SLP,ICU and
PAM all disabled.
--flavor
Building pegasus with the given flavor tag.
END
fi
##==============================================================================
##
## Guess the platform.
##
##==============================================================================
if [ "$help" != "1" ]; then
if [ -z "$platform" ]; then
machine=`(uname -m) 2>/dev/null` || machine=unknown
system=`(uname -s) 2>/dev/null` || system=unknown
token="$machine:$system"
case "$token" in
i686:Linux)
platform=LINUX_IX86_GNU
libbase=lib
;;
x86_64:Linux)
platform=LINUX_X86_64_GNU
libbase=lib64
;;
sun*:SunOS)
platform=SOLARIS_SPARC_64_CC
libbase=lib/64
;;
i86pc:SunOS)
platform=SOLARIS_X86_64_CC
libbase=lib/64
;;
ia64:HP-UX)
platform=HPUX_IA64_ACC
libbase=lib/64
;;
9000/800:HP-UX)
platform=HPUX_PARISC_ACC
libbase=lib
;;
ia64:Linux)
platform=LINUX_IA64_GNU
libbase=lib/64
;;
ppc:Linux)
platform=LINUX_PPC_GNU
libbase=lib
;;
ppc64:Linux)
platform=LINUX_PPC64_GNU
libbase=lib/64
;;
s390x:Linux)
platform=LINUX_ZSERIES64_GNU
libbase=lib/64
;;
s390:Linux)
platform=LINUX_ZSERIES_GNU
libbase=lib/64
;;
*)
unresolved=1
;;
esac
if [ "unresolved" = "1" ]; then
Machine=`(Uname -m) 2>/dev/null`||Machine=unknown
System=`(Uname -s) 2>/dev/null`||System=unknown
Token="$Machine:$System"
case "$Token" in
alpha:VMS)
platform=VMS_ALPHA_DECCXX
libbase=lib
;;
IA64:OpenVMS)
platform=VMS_IA64_DECCXX
libbase=lib/64
;;
*)
echo "$0: Failed to guess platform"
echo " machine=$machine"
echo " system=$system"
exit 1
;;
esac
fi
fi
##==============================================================================
##
## Resolve default directory names.
##
##==============================================================================
# --prefix:
if [ -z "$prefix" ]; then
prefix=`pwd`
fi
# --bindir:
if [ -z "$bindir" ]; then
bindir=$prefix/bin
fi
# --sbindir:
if [ -z "$sbindir" ]; then
sbindir=$prefix/sbin
fi
# --libdir:
if [ -z "$libdir" ]; then
libdir=$prefix/$libbase
fi
# --includedir:
if [ -z "$includedir" ]; then
includedir=$prefix/include
fi
if [ -z "$with_pam" ]; then
with_pam=/etc/pam.d
fi
##=============================================================================
##
##Check for Pre-Requsite
##
##============================================================================
path="$PATH"
IFS=":"
ccYes=0
missing=0
cmdlist="cc:gcc:g++:make"
for cc in $cmdlist
do
echo "checking for $cc"
for i in $path
do
if test -f $i/$cc; then
ccYes=1
break
fi
done
if [ "$ccYes" = "1" ];
then
echo "$cc :yes"
else
echo "$cc :no"
missing=1
break
fi
done
if [ "missing" = "1" ]; then
echo "$0: missing dependency $cc"
exit 1;
fi
##==============================================================================
##
## Detect openssl.
##
##==============================================================================
enable_ssl=0
with_ssl=""
if [ "$tiny" != "1" ] ;then
sslcmd="openssl"
sslYes=0
echo "checking for $sslcmd"
for i in $path
do
if test -f $i/$sslcmd; then
sslYes=1
withssl=$i
break
fi
done
if [ "$sslYes" = "1" ]; then
echo "ssl: Yes = $withssl/$sslcmd"
with_ssl=${withssl%/*}
else
echo "ssl: No"
fi
if [ ! -z "$with_ssl" ]; then
if [ ! -d "$with_ssl" ]; then
echo "$0: Error: No such directory: --with-ssl=$with_ssl"
exit 1;
fi
if [ ! -f "$with_ssl/include/openssl/ssl.h" ]; then
echo "$0: missing dependency: \$with_ssl/include/openssl/ssl.h"
missing=1
fi
if [ ! -f "$with_ssl/$libbase/libssl.so" ]; then
echo "$0: missing dependency: \$with_ssl/$libbase/libssl.so"
missing=1
fi
if [ "$missing" = "1" ]; then
echo "$0: where --with-ssl=$with_ssl"
unset with_ssl
else
enable_ssl=1
fi
fi
fi
##==============================================================================
##
## Detect openslp.
## Note that if openslp is not found it should use pegasus slp.
##
##==============================================================================
enable_slp=0
with_openslp=""
enable_openslp=0
if [ "$tiny" != "1" ] ;then
slpcmd="slptool"
slpYes=0
echo "checking for openslp"
for i in $path
do
if test -f $i/$slpcmd; then
slpYes=1
withslp=$i
break
fi
done
if [ "$slpYes" = "1" ]; then
echo "slp: Yes = $withslp/$slpcmd"
with_openslp=${withslp%/*}
else
echo "slp: No"
fi
if [ ! -z "$with_openslp" ]; then
if [ ! -d "$with_openslp" ]; then
echo "$0: Error: No such directory: --with-openslp=$with_openslp"
exit 1;
fi
if [ ! -f "$with_openslp/include/slp.h" ]; then
echo "$0: missing dependency: \$with_openslp/include/slp.h"
missing=1
fi
if [ ! -f "$with_openslp/$libbase/libslp.so" ]; then
echo "$0: missing dependency: \$with_openslp/$libbase/libslp.so"
missing=1
fi
if [ "$missing" = "1" ]; then
echo "$0: where --with-openslp=$with_openslp"
enable_slp=1
else
enable_openslp=1
fi
fi
fi
##==============================================================================
##
## Detect sqlite.
##
##==============================================================================
enable_sql=0
if [ "$tiny" != "1" ] ;then
sqlcmd="sqlite3"
sqlYes=0
echo "checking for sql"
for i in $path
do
if test -f $i/$sqlcmd; then
sqlYes=1
withsql=$i
break
fi
done
if [ "$sqlYes" = "1" ]; then
echo "sql: Yes = $withsql/$sqlcmd"
with_sql=${withsql%/*}
else
echo "sql: No"
fi
if [ ! -z "$with_sql" ]; then
if [ ! -d "$with_sql" ]; then
echo "$0: Error: No such directory: $with_sql"
exit 1;
fi
if [ ! -f "$with_sql/lib64/libsqlite3.so" ]; then
echo "$0: missing dependency: \$with_sql/lib64/libsqlite3.so"
missing=1
fi
if [ ! -f "$with_sql/include/sqlite3.h" ]; then
echo "$0:missing dependency :\$with_sql/include/sqlite3.h"
missing=1
fi
if [ "$missing" = "1" ]; then
echo "$0: sql not installed properly at $with_sql"
else
enable_sql=1
fi
fi
fi
##==============================================================================
##
## Detect net-snmp.
##
##==============================================================================
enable_snmp=0
if [ "$tiny" != "1" ]; then
snmpcmd="net-snmp-config"
snmpYes=0
echo "checking for net-snmp"
for i in $path
do
if test -f $i/$snmpcmd; then
snmpYes=1
withsnmp=$i
break
fi
done
if [ "$snmpYes" = "1" ]; then
echo "snmp: Yes = $withsnmp/$snmpcmd"
with_snmp=${withsnmp%/*}
else
echo "snmp: No"
fi
if [ ! -z "$with_snmp" ]; then
if [ ! -d "$with_snmp" ]; then
echo "$0: Error: No such directory: $with_snmp"
exit 1;
fi
if [ ! -f "$with_snmp/lib64/libnetsnmp.so" ]; then
echo "$0: missing dependency: "
missing=1
fi
if [ "$missing" = "1" ]; then
echo "$0: snmp not installed properly at $with_snmp"
else
enable_snmp=1
fi
fi
fi
##=============================================================================
##
##Detect icu ( Currently supported till 3.6)
##
##=============================================================================
supporticu=0
if [ "$tiny" != "1" ] ;then
icucmd="icu-config"
gencmd="genrb"
icuYes=0
echo "checking for icu"
for i in $path
do
if test -f $i/$icucmd ;then
if test -f $i/$gencmd ; then
icuYes=1
withicu=$i
break
fi
fi
done
if [ "$icuYes" = "1" ]; then
echo "icu: Yes = $withicu/$icucmd"
with_icu=${withicu%/*}
else
echo "icu: No"
fi
if [ "$icuYes" = "1" ]; then
icuversion=$(icu-config --version)
echo $icuversion
IFS='.'
op=0
for i in $icuversion
do
if [ "$op" = "0" ]; then
icumajor=$i
fi
if [ "$op" = "1" ]; then
icuminor=$i
fi
if [ "$op" -gt "1" ]; then
break
fi
op=$((op+1))
done
IFS='@@@'
supporticu=0
if [ "$icumajor" -le "3" -a "$icuminor" -le "6" ]; then
supporticu=1
fi
if [ "$supporticu" = "1" ]; then
if test -f $with_icu/$libbase/libicul18n.so; then
echo " missing dependency "
missing=1
supporticu=0
fi
fi
fi
fi
##=============================================================================
##
##Detect libz
##
##=============================================================================
libzpath=/usr
enable_libz=1
if [ ! -f "$libzpath/$libbase/libz.so" ]; then
echo " libz not found"
enable_libz=0
fi
if [ ! -f "$libzpath/include/zlib.h" ]; then
echo " libz not found"
enable_libz=0
fi
if [ "$libbase" = "lib64" ]; then
enable_32bit=1
fi
##==============================================================================
##
## These options (if non-empty) must denote absolute directory names.
##
##==============================================================================
for i in \
prefix \
bindir \
sbindir \
libdir \
includedir \
datadir
do
eval v=$`echo $i`
case $v in
/* | "")
;;
*)
echo "$0: Error: Must be an absolute directory name: --$i=$v"
exit 1;
;;
esac
done
if [ "$tiny" != "1" ] ;then
for i in \
with_ssl \
with_pam
do
eval v=$`echo $i`
case $v in
/* | "")
;;
*)
echo "$0: Error: Must be an absolute directory name: --$i=$v"
exit 1;
;;
esac
done
fi
##==============================================================================
##
## Check whether the test user will be able to access pegasus home.
##
##==============================================================================
if [ "$test_option" = "-1" ] ; then
with_test_user=guest
with_test_user_pass=guest
uid=`id -u`
cwd=`/bin/pwd`
if [ "$uid" = "0" -a "$disable_tests" != "1" ]; then
if [ "$enable_pam" = "1" -o "$enable_pam_standalone" = "1" ]; then
su $with_test_user -c "/bin/true"
if [ "$?" != "0" ]; then
echo "$0: The test user account ($with_test_user) does not exist on this system. Please create a test user with this name or designate an existing one with the --with-test-user option."
exit 1
fi
su $with_test_user -c "cd $cwd 2> /dev/null"
if [ "$?" != "0" ]; then
echo "$0: The test user account ($with_test_user) has insufficient privileges to access the pegasus root directory ($cwd), which will cause the user-context tests to fail. Please configure from a different directory."
exit 1
fi
else
echo "Warning: Using --with-test-user without --enable_pam or --enable-pam-standalone"
fi
fi
fi
##==============================================================================
##
## Detect pam
##
##==============================================================================
enable_pam=0
if [ "$tiny" != "1" ] ;then
pamcmd="pam_console_apply"
pamYes=0
IFS=':'
echo "checking for pam"
for i in $path
do
if test -f $i/$pamcmd; then
pamYes=1
withpam=$i
break
fi
done
if [ "$pamYes" = "1" ]; then
echo "pam: Yes = $withpam/$pamcmd"
with_pam=${withpam%/*}
if [ "$with_pam" = "" ]; then
with_pam=/
fi
else
echo "pam: No"
fi
if [ ! -z "$with_pam" ]
then
if [ ! -f "/usr/include/security/pam_appl.h" -a \
! -f "/usr/local/include/security/pam_appl.h" ]
then
echo "$0: <security/pam_appl.h> is missing (required by --enable_pam)"
exit 1
else
enable_pam=1
fi
fi
fi
##==============================================================================
##
## Create options.mak
##
##==============================================================================
options=options.mak
rm -f $options
echo "# This file was generated by configure." >> $options
echo "# ./configure $*" >> $options
echo " " >> $options
echo "## WARNING: The configure script is experimental and has known problems." >> $options
echo "## Use it at your own risk and review the results carefully in this" >> $options
echo "## options.mak file that it created." >> $options
PEGASUS_HOME=$prefix
PEGASUS_ROOT=$prefix
PEGASUS_PLATFORM=$platform
echo "export ROOT=$prefix" >> $options
#echo "export PATH=$PATH:$cwd/$platform/bin" >> $options
#echo "export LD_LIBRARY_PATH=$cwd/$platform/lib:$libdir" >> $options
echo "export PEGASUS_PLATFORM=$platform" >> $options
echo "export PEGASUS_ROOT=$prefix" >> $options
echo "export PEGASUS_HOME=$prefix" >> $options
if [ "$tiny" != "1" ];
then
enable_debug=1
interop_name=root/PG_InterOp
echo "export PEGASUS_ENABLE_AUDIT_LOGGER=true" >> $options
echo "export PEGASUS_ENABLE_DMTF_INDICATION_PROFILE_SUPPORT=true" >> $options
echo "export PEGASUS_ENABLE_EMAIL_HANDLER=true" >> $options
echo "export PEGASUS_ENABLE_INDICATION_COUNT=true" >> $options
echo "export PEGASUS_ENABLE_INTEROP_PROVIDER=true" >> $options
if [ "$dis_wsman" != "1" ]; then
echo "export PEGASUS_ENABLE_PROTOCOL_WSMAN=true" >> $options
fi
echo "export PEGASUS_ENABLE_SYSTEM_LOG_HANDLER=true" >> $options
echo "export PEGASUS_ENABLE_USERGROUP_AUTHORIZATION=true" >> $options
#echo "export PEGASUS_ENABLE_PRIVILEGE_SEPARATION=true" >>$options
fi
if [ "$disable_oop" = "1" ]
then
echo "export PEGASUS_DEFAULT_ENABLE_OOP=false" >> $options
echo "export PEGASUS_DISABLE_PROV_USERCTXT=1" >> $options
echo "export PEGASUS_DISABLE_PRIVILEGED_TESTS=true" >> $options
fi
echo "export PEGASUS_ENABLE_CQL=true" >> $options
echo "export PEGASUS_ENABLE_WQL=true" >> $options
if [ "$disable_ipv6" = "1" ];
then
echo "export PEGASUS_ENABLE_IPV6=false" >> $options
else
echo "export PEGASUS_ENABLE_IPV6=true" >> $options
fi
echo "export PEGASUS_INTEROP_NAMESPACE=$interop_name" >> $options
if [ "$disable_trace" = "1" ];
then
echo "export PEGASUS_REMOVE_TRACE=1" >> $options
fi
if [ "$disable_tests" = "1" ];
then
echo "export PEGASUS_SKIP_MOST_TEST_DIRS=true" >> $options
fi
if [ "$enable_perinst" = "1" ];
then
echo "export PEGASUS_DISABLE_PERFINST=true" >> $options
echo "export PEGASUS_INDICATION_PERFINST=true" >> $options
fi
if [ "$enable_debug" = 1 ]
then
echo "export PEGASUS_DEBUG=1" >> $options
fi
if [ "$enable_mrr_generation" = 1 ]
then
echo "export PEGASUS_ENABLE_MRR_GENERATION=1" >> $options
fi
if [ "$enable_mrr" = 1 ]
then
echo "export PEGASUS_ENABLE_MRR=1" >> $options
fi
if [ "$enable_pam" = "1" ]; then
echo "export PEGASUS_PAM_AUTHENTICATION=true" >> $options
echo "export PEGASUS_USE_PAM_STANDALONE_PROC=false" >> $options
\cp -f $PEGASUS_ROOT/rpm/wbem /etc/pam.d
chmod 0644 /etc/pam.d/wbem
fi
if [ "$enable_pam_standalone" = "1" ]; then
echo "export PEGASUS_PAM_AUTHENTICATION=true" >> $options
echo "export PEGASUS_USE_PAM_STANDALONE_PROC=true" >> $options
\cp -f $PEGASUS_ROOT/rpm/wbem /etc/pam.d
chmod 0644 /etc/pam.d/wbem
fi
if [ "$enable_binary_repository" = "1" ]; then
echo "export PEGASUS_REPOSITORY_MODE=BIN" >> $options
fi
if [ "$enable_libz" = "1" ]; then
echo "export PEGASUS_ENABLE_COMPRESSED_REPOSITORY=1" >> $options
fi
if [ "$enable_ssl" = "1" ]; then
echo "export PEGASUS_HAS_SSL=true" >> $options
echo "export PEGASUS_ENABLE_SSL_CRL_VERIFICATION=true" >> $options
fi
if [ ! -z "$with_ssl" ]; then
echo "export OPENSSL_HOME=$with_ssl" >> $options
fi
if [ "$enable_slp" = "1" ]; then
echo "export PEGASUS_ENABLE_SLP=true" >> $options
fi
if [ "$enable_sql" = "1" ]; then
echo "export PEGASUS_USE_SQLITE_REPOSITORY=true" >> $options
echo "export SQLITE_HOME=$with_sql">> $options
fi
if [ "$enable_snmp" = "1" ]; then
echo "export PEGASUS_ENABLE_NET_SNMPV3=true" >> $options
echo "export PEGASUS_USE_NET_SNMP=true" >> $options
fi
if [ "$enable_openslp" = "1" ]; then
echo "export PEGASUS_ENABLE_SLP=true" >> $options
echo "export PEGASUS_USE_EXTERNAL_SLP=openslp" >> $options
fi
#if [ ! -z "$with_external_slp" ]; then
# echo "export PEGASUS_ENABLE_SLP=true" >> $options
# echo "export PEGASUS_USE_EXTERNAL_SLP=$with_external_slp" >> $options
#fi
if [ ! -z "$with_external_slp_dir" ]; then
echo "export PEGASUS_EXTERNAL_SLP_HOME=$with_external_slp_dir" >> $options
fi
if [ ! -z "$with_openslp" ]; then
echo "export PEGASUS_EXTERNAL_SLP_HOME=$with_openslp" >> $options
fi
if [ "$disable_cmpi" != "1" ]; then
echo "export PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER=true" >> $options
fi
if [ ! -z "$flavor" ]; then
echo "export PEGASUS_FLAVOR=tog">>$options
fi
if [ "$supporticu" = "1" ]; then
echo "export PEGASUS_HAS_MESSAGES=true">>$options
echo "export PEGASUS_HAS_ICU=true">>$options
echo "export PEGASUS_USE_DEFAULT_MESSAGES=true">>$options
# echo "export ICU_INSTALL=$with_icu">>$options
fi
if [ "$enable_32bit" = "1" ]; then
#echo "export PEGASUS_INTERNAL_ENABLE_32BIT_PROVIDER_SUPPORT=true" >> $options
echo "export PEGASUS_PLATFORM_FOR_32BIT_PROVIDER_SUPPORT=$platform" >> $options
fi
if [ "$test_option" = "1" ]; then
echo "export PEGASUS_CCOVER=true" >> $options
echo "export PEGASUS_DISABLE_PRIVILEGED_TESTS=false" >> $options
echo "export PEGASUS_ENABLE_GCOV=true" >> $options
echo "export PEGASUS_ENABLE_SORTED_DIFF=true" >> $options
echo "export PEGASUS_TEST_ENABLE_DEBUG_TRACE=true" >> $options
echo "export PEGASUS_TEST_ISGROUP_GROUP=root" >> $options
echo "export PEGASUS_TEST_ISGROUP_USER_FAILURE=test" >> $options
echo "export PEGASUS_TEST_ISGROUP_USER_SUCCESS=root" >> $options
echo "export PEGASUS_TEST_SDK=true" >> $options
echo "export PEGASUS_TEST_USER_DEFINED=false" >> $options
echo "#export PEGASUS_TEST_USER_ID=" >> $options
echo "#export PEGASUS_TEST_USER_PASS=" >> $options
echo "export PEGASUS_TEST_VALGRIND_LOG_DIR=." >> $options
echo "export PEGASUS_OVERRIDE_SSL_CERT_VERIFICATION_RESULT=true" >> $options
echo "export PEGASUS_TMP=." >> $options
echo "export PLATFORM_CORE_PATTERN=true" >> $options
fi
echo "export PATH=$bindir:$PATH" >> $options
echo "export LD_LIBRARY_PATH=$libdir:$LD_LIBRARY_PATH" >> $options
IFS="@@@"
export PATH=$bindir:$PATH
export LD_LIBRARY_PATH=$libdir:$LD_LIBRARY_PATH
export PEGASUS_HOME PEGASUS_ROOT PEGASUS_PLATFORM
echo "created $options"
## if the output file exists, make a backup
if [ -f $options ]; then
echo backup $options to $options.bak
cp -f $options $options.bak
fi
. ./$options
##==============================================================================
##
## Create GNUmakefile
##
##==============================================================================
cat > GNUmakefile << END
include options.mak
export PATH := \$(PATH):\$(PEGASUS_HOME)/bin
export LD_LIBRARY_PATH := \$(LD_LIBRARY_PATH):\$(PEGASUS_HOME)/bin
include Makefile
distclean:
rm -f GNUmakefile
rm -f options.mak
rm -f options.mak.bak
END
echo "created GNUmakefile"
##==============================================================================
##
## Print final message:
##
##==============================================================================
echo "configured for $platform"
echo ===================
echo WARNING: This script is experimental and has known problems. Please
echo use it at your own risk and review the results carefully in the \
echo options.mak file that it creates. Until this script is completed
echo the traditional OpenPegasus build configuration through environment
echo variables will remain in place and is the prefered setup tool
echo ===================
echo
fi
#set +x