<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>CFBundleDevelopmentRegion</key>
	<string>English</string>
	<key>CFBundleExecutable</key>
	<string>MAGIC_TARGET</string>
	<key>CFBundleIdentifier</key>
	<string>org.debian.alioth.pcsclite.smartcardccid</string>
	<key>CFBundleInfoDictionaryVersion</key>
	<string>6.0</string>
	MAGIC_CLASS
	<key>CFBundlePackageType</key>
	<string>BNDL</string>
	<key>CFBundleShortVersionString</key>
	<string>MAGIC_VERSION</string>
	<key>CFBundleSignature</key>
	<string>????</string>
	<key>CFBundleVersion</key>
	<string>0.0.1d1</string>
	<key>ifdCapabilities</key>
	<string>0x00000000</string>

	<!-- Possible values for ifdCapabilities bits
	1: IFD_GENERATE_HOTPLUG
	   plugging the reader calls pcscd \-\-hotplug

	Default value is 0x00000000
	-->

	<key>ifdProtocolSupport</key>
	<string>0x00000001</string>
	<key>ifdVersionNumber</key>
	<string>0x00000001</string>

	<key>ifdLogLevel</key>
	<string>0x0003</string>

	<!-- Possible values for ifdLogLevel
	1: CRITICAL  important error messages
	2: INFO      informative messages like what reader was detected
	4: COMM      a dump of all the bytes exchanged between the host and
	             the reader
	8: PERIODIC  periodic info when pcscd test if a card is present
	             (every 1/10 of a second)

	The final value is a OR of these values

	Default value: 3 (CRITICAL + INFO)
	-->

	<key>ifdDriverOptions</key>
	<string>0x0000</string>

	<!-- Possible values for ifdDriverOptions
	0x01: DRIVER_OPTION_CCID_EXCHANGE_AUTHORIZED
		the CCID Exchange command is allowed. You can use it through
		SCardControl(hCard, IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE, ...)

	0x02: DRIVER_OPTION_GEMPC_TWIN_KEY_APDU
		If set the GemPC Twin and GemPC Key readers with be configured
		so that the T=1 TPDU protocol is done by the firmware instead of
		the driver.
		This switches the reader in APDU mode and also in EMV mode so
		may not work with non EMV cards.

	0x04: DRIVER_OPTION_USE_BOGUS_FIRMWARE
		Some reader firmwares have bugs. By default the driver refuses
		to work with such firmware versions. If your reader is rejected
		because of the firmware (log message: "Firmware (x.y) is
		bogus!") you can:
		- upgrade your reader firmware (not all readers can do that)
		or
		- get another reader with a new/bugfree firmware
		or
		- activate this option but you will have problems depending on
		  the bug

	0x08: free

	bits 4 & 5: (values 0x00, 0x10, 0x20, 0x30)
	 0x00: power on the card at 5V, then 1.8V then 3V (default value)
	 0x10: power on the card at 3V, then 5V then 1.8V
	 0x20: power on the card at 1.8V, then 3V and then 5V
	 0x30: let the reader decide

	0x40: DRIVER_OPTION_DISABLE_PIN_RETRIES
		The Gemalto pinpad reader sends a VERIFY command with no PIN
		value in order to retreive the remaining retries from the card.
		Some cards (like the OpenPGP card) do not support this.

	Default value: 0
	-->

	<key>ifdManufacturerString</key>
	<string>Ludovic Rousseau (ludovic.rousseau@free.fr)</string>

	<key>ifdProductString</key>
	<string>Generic CCID driver</string>

	<key>ifdVendorID</key>
	<array>
		MAGIC_VENDOR
	</array>

	<key>ifdProductID</key>
	<array>
		MAGIC_PRODUCT
	</array>

	<key>ifdFriendlyName</key>
	<array>
		MAGIC_FRIENDLYNAME
	</array>

	<key>Copyright</key>
	<string>This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version.</string>

</dict>
</plist>