/****************************/
/* THIS IS OPEN SOURCE CODE */
/****************************/
/**
* @file papi_hl.c
* @author Philip Mucci
* mucci@cs.utk.edu
* @author Kevin London
* london@cs.utk.edu
* @author dan terpstra
* terpstra@cs.utk.edu
* @brief This file contains the 'high level' interface to PAPI.
* BASIC is a high level language. ;-) */
#include "papi.h"
#include "papi_internal.h"
#include "papi_memory.h"
#include <string.h>
/* high level papi functions*/
/*
* Which high-level interface are we using?
*/
#define HL_STOP 0
#define HL_START 1
#define HL_FLIP 2
#define HL_FLOP 3
#define HL_IPC 4
#define HL_EPC 5
#define HL_READ 6
#define HL_ACCUM 7
/** \internal
* This is stored per thread
*/
typedef struct _HighLevelInfo
{
int EventSet; /**< EventSet of the thread */
short int num_evts; /**< number of events in the eventset */
short int running; /**< STOP, START, or RATE */
long long initial_real_time; /**< Start real time */
long long initial_proc_time; /**< Start processor time */
long long last_real_time; /**< Previous value of real time */
long long last_proc_time; /**< Previous value of processor time */
long long total_ins; /**< Total instructions */
} HighLevelInfo;
int _hl_rate_calls( float *real_time, float *proc_time, int *events,
long long *values, long long *ins, float *rate, int mode );
void _internal_cleanup_hl_info( HighLevelInfo * state );
int _internal_check_state( HighLevelInfo ** state );
int _internal_start_hl_counters( HighLevelInfo * state );
int _internal_hl_read_cnts( long long *values, int array_len, int flag );
/* CHANGE LOG:
- ksl 10/17/03
Pretty much a complete rewrite of the high level interface. Now
the interface is thread safe and you don't have to worry as much
about mixing the various high level calls.
- dkt 11/19/01:
After much discussion with users and developers, removed FMA and SLOPE
fudge factors. SLOPE was not being used, and we decided the place to
apply FMA was at a higher level where there could be a better understanding
of platform discrepancies and code implications.
ALL PAPI CALLS NOW RETURN EXACTLY WHAT THE HARDWARE REPORTS
- dkt 08/14/01:
Added reinitialization of values and proc_time to new reinit code.
Added SLOPE and FMA constants to correct for systemic errors on a
platform-by-platform basis.
SLOPE is a factor subtracted from flpins on each call to compensate
for platform overhead in the call.
FMA is a shifter that doubles floating point counts on platforms that
count FMA as one op instead of two.
NOTE: We are making the FLAWED assumption that ALL flpins are FMA!
This will result in counts that are TOO HIGH on the affected platforms
in instances where the code is NOT mostly FMA.
- dkt 08/01/01:
NOTE: Calling semantics have changed!
Now, if flpins < 0 (an invalid value) a PAPI_reset is issued to reset the
counter values. The internal start time is also reset. This should be a
benign change, exept in the rare case where a user passes an uninitialized
(and possibly negative) value for flpins to the routine *AFTER* it has been
called the first time. This is unlikely, since the first call clears and
returns th is value.
- dkt 08/01/01:
Internal sequencing changes:
-- initial PAPI_get_real_usec() call moved above PAPI_start to avoid unwanted flops.
-- PAPI_accum() replaced with PAPI_start() / PAPI_stop pair for same reason.
*/
/** @internal
* This function is called to determine the state of the system.
* We may as well set the HighLevelInfo so you don't have to look it
* up again.
*/
int
_internal_check_state( HighLevelInfo ** outgoing )
{
int retval;
HighLevelInfo *state = NULL;
/* Only allow one thread at a time in here */
if ( init_level == PAPI_NOT_INITED ) {
retval = PAPI_library_init( PAPI_VER_CURRENT );
if ( retval != PAPI_VER_CURRENT ) {
return ( retval );
} else {
_papi_hwi_lock( HIGHLEVEL_LOCK );
init_level = PAPI_HIGH_LEVEL_INITED;
_papi_hwi_unlock( HIGHLEVEL_LOCK );
}
}
/*
* Do we have the thread specific data setup yet?
*/
if ( ( retval =
PAPI_get_thr_specific( PAPI_HIGH_LEVEL_TLS, ( void ** ) &state ) )
!= PAPI_OK || state == NULL ) {
state = ( HighLevelInfo * ) papi_malloc( sizeof ( HighLevelInfo ) );
if ( state == NULL )
return ( PAPI_ENOMEM );
memset( state, 0, sizeof ( HighLevelInfo ) );
state->EventSet = -1;
if ( ( retval = PAPI_create_eventset( &state->EventSet ) ) != PAPI_OK )
return ( retval );
if ( ( retval =
PAPI_set_thr_specific( PAPI_HIGH_LEVEL_TLS,
state ) ) != PAPI_OK )
return ( retval );
}
*outgoing = state;
return ( PAPI_OK );
}
/** @internal
* Make sure to allocate space for values
*/
int
_internal_start_hl_counters( HighLevelInfo * state )
{
return ( PAPI_start( state->EventSet ) );
}
void
_internal_cleanup_hl_info( HighLevelInfo * state )
{
state->num_evts = 0;
state->running = HL_STOP;
state->initial_real_time = -1;
state->initial_proc_time = -1;
state->total_ins = 0;
return;
}
/** @class PAPI_flips
* @brief Simplified call to get Mflips/s (floating point instruction rate), real and processor time.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_flips( float *rtime, float *ptime, long long *flpins, float *mflips );
*
* @param *rtime
* total realtime since the first call
* @param *ptime
* total process time since the first call
* @param *flpins
* total floating point instructions since the first call
* @param *mflips
* incremental (Mega) floating point instructions per seconds since the last call
*
* @retval PAPI_EINVAL
* The counters were already started by something other than PAPI_flips().
* @retval PAPI_ENOEVNT
* The floating point instructions event does not exist.
* @retval PAPI_ENOMEM
* Insufficient memory to complete the operation.
*
* The first call to PAPI_flips() will initialize the PAPI High Level interface,
* set up the counters to monitor the PAPI_FP_INS event and start the counters.
*
* Subsequent calls will read the counters and return total real time,
* total process time, total floating point instructions since the start of the
* measurement and the Mflip/s rate since latest call to PAPI_flips().
* A call to PAPI_stop_counters() will stop the counters from running and then
* calls such as PAPI_start_counters() or other rate calls can safely be used.
*
* PAPI_flips returns information related to floating point instructions using
* the PAPI_FP_INS event. This is intended to measure instruction rate through the
* floating point pipe with no massaging.
*
* @see PAPI_flops()
* @see PAPI_ipc()
* @see PAPI_epc()
* @see PAPI_stop_counters()
*/
int
PAPI_flips( float *rtime, float *ptime, long long *flpins, float *mflips )
{
int retval;
int events[1] = {PAPI_FP_INS};
long long values = 0;
if ( rtime == NULL || ptime == NULL || flpins == NULL || mflips == NULL )
return PAPI_EINVAL;
retval = _hl_rate_calls( rtime, ptime, events, &values, flpins, mflips, HL_FLIP );
return ( retval );
}
/** @class PAPI_flops
* @brief Simplified call to get Mflops/s (floating point operation rate), real and processor time.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_flops( float *rtime, float *ptime, long long *flpops, float *mflops );
*
* @param *rtime
* total realtime since the first call
* @param *ptime
* total process time since the first call
* @param *flpops
* total floating point operations since the first call
* @param *mflops
* incremental (Mega) floating point operations per seconds since the last call
*
* @retval PAPI_EINVAL
* The counters were already started by something other than PAPI_flops().
* @retval PAPI_ENOEVNT
* The floating point operations event does not exist.
* @retval PAPI_ENOMEM
* Insufficient memory to complete the operation.
*
* The first call to PAPI_flops() will initialize the PAPI High Level interface,
* set up the counters to monitor the PAPI_FP_OPS event and start the counters.
*
* Subsequent calls will read the counters and return total real time,
* total process time, total floating point operations since the start of the
* measurement and the Mflop/s rate since latest call to PAPI_flops().
* A call to PAPI_stop_counters() will stop the counters from running and then
* calls such as PAPI_start_counters() or other rate calls can safely be used.
*
* PAPI_flops returns information related to theoretical floating point operations
* rather than simple instructions. It uses the PAPI_FP_OPS event which attempts to
* 'correctly' account for, e.g., FMA undercounts and FP Store overcounts, etc.
*
* @see PAPI_flips()
* @see PAPI_ipc()
* @see PAPI_epc()
* @see PAPI_stop_counters()
*/
int
PAPI_flops( float *rtime, float *ptime, long long *flpops, float *mflops )
{
int retval;
int events[1] = {PAPI_FP_OPS};
long long values = 0;
if ( rtime == NULL || ptime == NULL || flpops == NULL || mflops == NULL )
return PAPI_EINVAL;
retval = _hl_rate_calls( rtime, ptime, events, &values, flpops, mflops, HL_FLOP );
return ( retval );
}
/** @class PAPI_ipc
* @brief Simplified call to get instructions per cycle, real and processor time.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_ipc( float *rtime, float *ptime, long long *ins, float *ipc );
*
* @param *rtime
* total realtime since the first call
* @param *ptime
* total process time since the first call
* @param *ins
* total instructions since the first call
* @param *ipc
* incremental instructions per cycle since the last call
*
* @retval PAPI_EINVAL
* The counters were already started by something other than PAPI_ipc().
* @retval PAPI_ENOEVNT
* The floating point operations event does not exist.
* @retval PAPI_ENOMEM
* Insufficient memory to complete the operation.
*
* The first call to PAPI_ipc() will initialize the PAPI High Level interface,
* set up the counters to monitor PAPI_TOT_INS and PAPI_TOT_CYC events
* and start the counters.
*
* Subsequent calls will read the counters and return total real time,
* total process time, total instructions since the start of the
* measurement and the IPC rate since the latest call to PAPI_ipc().
*
* A call to PAPI_stop_counters() will stop the counters from running and then
* calls such as PAPI_start_counters() or other rate calls can safely be used.
*
* PAPI_ipc should return a ratio greater than 1.0, indicating instruction level
* parallelism within the chip. The larger this ratio the more effeciently the program
* is running.
*
* @see PAPI_flips()
* @see PAPI_flops()
* @see PAPI_epc()
* @see PAPI_stop_counters()
*/
int
PAPI_ipc( float *rtime, float *ptime, long long *ins, float *ipc )
{
long long values[2] = { 0, 0 };
int events[2] = {PAPI_TOT_INS, PAPI_TOT_CYC};
int retval = 0;
if ( rtime == NULL || ptime == NULL || ins == NULL || ipc == NULL )
return PAPI_EINVAL;
retval = _hl_rate_calls( rtime, ptime, events, values, ins, ipc, HL_IPC );
return ( retval );
}
/** @class PAPI_epc
* @brief Simplified call to get arbitrary events per cycle, real and processor time.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_epc( int event, float *rtime, float *ptime, long long *ref, long long *core, long long *evt, float *epc );
*
* @param event
* event code to be measured (0 defaults to PAPI_TOT_INS)
* @param *rtime
* total realtime since the first call
* @param *ptime
* total process time since the first call
* @param *ref
* incremental reference clock cycles since the last call
* @param *core
* incremental core clock cycles since the last call
* @param *evt
* total events since the first call
* @param *epc
* incremental events per cycle since the last call
*
* @retval PAPI_EINVAL
* The counters were already started by something other than PAPI_epc().
* @retval PAPI_ENOEVNT
* One of the requested events does not exist.
* @retval PAPI_ENOMEM
* Insufficient memory to complete the operation.
*
* The first call to PAPI_epc() will initialize the PAPI High Level interface,
* set up the counters to monitor the user specified event, PAPI_TOT_CYC,
* and PAPI_REF_CYC (if it exists) and start the counters.
*
* Subsequent calls will read the counters and return total real time,
* total process time, total event counts since the start of the
* measurement and the core and reference cycle count and EPC rate since the
* latest call to PAPI_epc().
* A call to PAPI_stop_counters() will stop the counters from running and then
* calls such as PAPI_start_counters() or other rate calls can safely be used.
*
* PAPI_epc can provide a more detailed look at algorithm efficiency in light of clock
* variability in modern cpus. MFLOPS is no longer an adequate description of peak
* performance if clock rates can arbitrarily speed up or slow down. By allowing a
* user specified event and reporting reference cycles, core cycles and real time,
* PAPI_epc provides the information to compute an accurate effective clock rate, and
* an accurate measure of computational throughput.
*
* @see PAPI_flips()
* @see PAPI_flops()
* @see PAPI_ipc()
* @see PAPI_stop_counters()
*/
int
PAPI_epc( int event, float *rtime, float *ptime, long long *ref, long long *core, long long *evt, float *epc )
{
long long values[3] = { 0, 0, 0 };
int events[3] = {PAPI_TOT_INS, PAPI_TOT_CYC, PAPI_REF_CYC};
int retval = 0;
if ( rtime == NULL || ptime == NULL || ref == NULL ||core == NULL || evt == NULL || epc == NULL )
return PAPI_EINVAL;
// if an event is provided, use it; otherwise use TOT_INS
if (event != 0 ) events[0] = event;
if ( PAPI_query_event( ( int ) PAPI_REF_CYC ) != PAPI_OK )
events[2] = 0;
retval = _hl_rate_calls( rtime, ptime, events, values, evt, epc, HL_EPC );
*core = values[1];
*ref = values[2];
return ( retval );
}
int
_hl_rate_calls( float *real_time, float *proc_time, int *events,
long long *values, long long *ins, float *rate, int mode )
{
long long rt, pt; // current elapsed real and process times in usec
int num_events = 2;
int retval = 0;
HighLevelInfo *state = NULL;
if ( ( retval = _internal_check_state( &state ) ) != PAPI_OK ) {
return ( retval );
}
if ( state->running != HL_STOP && state->running != mode ) {
return PAPI_EINVAL;
}
if ( state->running == HL_STOP ) {
switch (mode) {
case HL_FLOP:
case HL_FLIP:
num_events = 1;
break;
case HL_IPC:
break;
case HL_EPC:
if ( events[2] != 0 ) num_events = 3;
break;
default:
return PAPI_EINVAL;
}
if (( retval = PAPI_add_events( state->EventSet, events, num_events )) != PAPI_OK ) {
_internal_cleanup_hl_info( state );
PAPI_cleanup_eventset( state->EventSet );
return retval;
}
state->total_ins = 0;
state->initial_real_time = state->last_real_time = PAPI_get_real_usec( );
state->initial_proc_time = state->last_proc_time = PAPI_get_virt_usec( );
if ( ( retval = PAPI_start( state->EventSet ) ) != PAPI_OK ) {
return retval;
}
/* Initialize the interface */
state->running = mode;
*real_time = 0.0;
*proc_time = 0.0;
*rate = 0.0;
} else {
if ( ( retval = PAPI_stop( state->EventSet, values ) ) != PAPI_OK ) {
state->running = HL_STOP;
return retval;
}
/* Read elapsed real and process times */
rt = PAPI_get_real_usec();
pt = PAPI_get_virt_usec();
/* Convert to seconds with multiplication because it is much faster */
*real_time = ((float)( rt - state->initial_real_time )) * .000001;
*proc_time = ((float)( pt - state->initial_proc_time )) * .000001;
state->total_ins += values[0];
switch (mode) {
case HL_FLOP:
case HL_FLIP:
/* Calculate MFLOP and MFLIP rates */
if ( pt > 0 ) {
*rate = (float)values[0] / (pt - state->last_proc_time);
} else *rate = 0;
break;
case HL_IPC:
case HL_EPC:
/* Calculate IPC */
if (values[1]!=0) {
*rate = (float) ((float)values[0] / (float) ( values[1]));
}
break;
default:
return PAPI_EINVAL;
}
state->last_real_time = rt;
state->last_proc_time = pt;
if ( ( retval = PAPI_start( state->EventSet ) ) != PAPI_OK ) {
state->running = HL_STOP;
return retval;
}
}
*ins = state->total_ins;
return PAPI_OK;
}
/** @class PAPI_num_counters
* @brief Get the number of hardware counters available on the system.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_num_counters( void );
*
* @post
* Initializes the library to PAPI_HIGH_LEVEL_INITED if necessary.
*
* @retval PAPI_EINVAL
* papi.h is different from the version used to compile the PAPI library.
* @retval PAPI_ENOMEM
* Insufficient memory to complete the operation.
* @retval PAPI_ESYS
* A system or C library call failed inside PAPI, see the errno variable.
*
* @par Examples:
* @code
* int num_hwcntrs;
* // The installation does not support PAPI
* if ((num_hwcntrs = PAPI_num_counters()) < 0 )
* handle_error(1);
* // The installation supports PAPI, but has no counters
* if ((num_hwcntrs = PAPI_num_counters()) == 0 )
* fprintf(stderr,"Info:: This machine does not provide hardware counters.\n");
* @endcode
*
* PAPI_num_counters() returns the optimal length of the values array for the high level functions.
* This value corresponds to the number of hardware counters supported by the current CPU component.
*
* @note This function only works for the CPU component. To determine the number of counters on
* another component, use the low level PAPI_num_cmp_hwctrs().
*/
int
PAPI_num_counters( void )
{
int retval;
HighLevelInfo *tmp = NULL;
/* Make sure the Library is initialized, etc... */
if ( ( retval = _internal_check_state( &tmp ) ) != PAPI_OK )
return ( retval );
return ( PAPI_get_opt( PAPI_MAX_HWCTRS, NULL ) );
}
/** @class PAPI_start_counters
* @brief Start counting hardware events.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_start_counters( int *events, int array_len );
*
* @param *events
* an array of codes for events such as PAPI_INT_INS or a native event code
* @param array_len
* the number of items in the *events array
*
* @retval PAPI_EINVAL
* One or more of the arguments is invalid.
* @retval PAPI_EISRUN
* Counters have already been started, you must call PAPI_stop_counters()
* before you call this function again.
* @retval PAPI_ESYS
* A system or C library call failed inside PAPI, see the errno variable.
* @retval PAPI_ENOMEM
* Insufficient memory to complete the operation.
* @retval PAPI_ECNFLCT
* The underlying counter hardware cannot count this event and other events
* in the EventSet simultaneously.
* @retval PAPI_ENOEVNT
* The PAPI preset is not available on the underlying hardware.
*
* PAPI_start_counters() starts counting the events named in the *events array.
* This function cannot be called if the counters have already been started.
* The user must call PAPI_stop_counters() to stop the events explicitly if
* he/she wants to call this function again.
* It is the user's responsibility to choose events that can be counted
* simultaneously by reading the vendor's documentation.
* The length of the *events array should be no longer than the value returned
* by PAPI_num_counters().
*
* @code
if( PAPI_start_counters( Events, num_hwcntrs ) != PAPI_OK )
handle_error(1);
* @endcode
*
* @see PAPI_stop_counters() PAPI_add_event() PAPI_create_eventset()
*/
int
PAPI_start_counters( int *events, int array_len )
{
int i, retval;
HighLevelInfo *state = NULL;
if ( events == NULL || array_len <= 0 )
return PAPI_EINVAL;
if ( ( retval = _internal_check_state( &state ) ) != PAPI_OK )
return ( retval );
if ( state->running != 0 )
return ( PAPI_EINVAL );
/* load events to the new EventSet */
for ( i = 0; i < array_len; i++ ) {
retval = PAPI_add_event( state->EventSet, events[i] );
if ( retval == PAPI_EISRUN )
return ( retval );
if ( retval ) {
/* remove any prior events that may have been added
* and cleanup the high level information
*/
_internal_cleanup_hl_info( state );
PAPI_cleanup_eventset( state->EventSet );
return ( retval );
}
}
/* start the EventSet */
if ( ( retval = _internal_start_hl_counters( state ) ) == PAPI_OK ) {
state->running = HL_START;
state->num_evts = ( short ) array_len;
}
return ( retval );
}
/*========================================================================*/
/* int PAPI_read_counters(long long *values, int array_len) */
/* */
/* Read the running counters into the values array. This call */
/* implicitly initializes the internal counters to zero and allows */
/* them continue to run upon return. */
/*========================================================================*/
int
_internal_hl_read_cnts( long long *values, int array_len, int flag )
{
int retval;
HighLevelInfo *state = NULL;
if ( ( retval = _internal_check_state( &state ) ) != PAPI_OK )
return ( retval );
if ( state->running != HL_START || array_len < state->num_evts )
return ( PAPI_EINVAL );
if ( flag == HL_ACCUM )
return ( PAPI_accum( state->EventSet, values ) );
else if ( flag == HL_READ ) {
if ( ( retval = PAPI_read( state->EventSet, values ) ) != PAPI_OK )
return ( retval );
return ( PAPI_reset( state->EventSet ) );
}
/* Invalid flag passed in */
return ( PAPI_EINVAL );
}
/** @class PAPI_read_counters
* @brief Read and reset counters.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_read_counters( long long *values, int array_len );
*
* @param *values
* an array to hold the counter values of the counting events
* @param arry_len
* the number of items in the *events array
*
* @pre
* These calls assume an initialized PAPI library and a properly added event set.
*
* @post
* The counters are reset and left running after the call.
*
* @retval PAPI_EINVAL
* One or more of the arguments is invalid.
* @retval PAPI_ESYS
* A system or C library call failed inside PAPI, see the errno variable.
*
* PAPI_read_counters() copies the event counters into the array *values.
*
* @code
do_100events();
if ( PAPI_read_counters( values, num_hwcntrs ) != PAPI_OK )
handlw_error(1);
// values[0] now equals 100
do_100events();
if ( PAPI_accum_counters( values, num_hwcntrs ) != PAPI_OK )
handle_error(1);
// values[0] now equals 200
values[0] = -100;
do_100events();
if ( PAPI_accum_counters(values, num_hwcntrs ) != PAPI_OK )
handle_error();
// values[0] now equals 0
* @endcode
*
* @see PAPI_set_opt() PAPI_start_counters()
*/
int
PAPI_read_counters( long long *values, int array_len )
{
return ( _internal_hl_read_cnts( values, array_len, HL_READ ) );
}
/** @class PAPI_accum_counters
* @brief Accumulate and reset counters.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_accum_counters( long long *values, int array_len );
*
* @param *values
* an array to hold the counter values of the counting events
* @param arry_len
* the number of items in the *events array
*
* @pre
* These calls assume an initialized PAPI library and a properly added event set.
*
* @post
* The counters are reset and left running after the call.
*
* @retval PAPI_EINVAL
* One or more of the arguments is invalid.
* @retval PAPI_ESYS
* A system or C library call failed inside PAPI, see the errno variable.
*
* PAPI_accum_counters() adds the event counters into the array *values.
*
* @code
do_100events();
if ( PAPI_read_counters( values, num_hwcntrs ) != PAPI_OK )
handlw_error(1);
// values[0] now equals 100
do_100events();
if ( PAPI_accum_counters( values, num_hwcntrs ) != PAPI_OK )
handle_error(1);
// values[0] now equals 200
values[0] = -100;
do_100events();
if ( PAPI_accum_counters(values, num_hwcntrs ) != PAPI_OK )
handle_error();
// values[0] now equals 0
* @endcode
*
* @see PAPI_set_opt() PAPI_start_counters()
*/
int
PAPI_accum_counters( long long *values, int array_len )
{
if ( values == NULL || array_len <= 0 )
return PAPI_EINVAL;
return ( _internal_hl_read_cnts( values, array_len, HL_ACCUM ) );
}
/** @class PAPI_stop_counters
* @brief Stop counting hardware events and reset values to zero.
*
* @par C Interface:
* \#include <papi.h> @n
* int PAPI_stop_counters( long long *values, int array_len );
*
* @param *values
* an array where to put the counter values
* @param array_len
* the number of items in the *values array
*
* @post
* After this function is called, the values are reset to zero.
*
* @retval PAPI_EINVAL
* One or more of the arguments is invalid.
* @retval PAPI_ENOTRUN
* The EventSet is not started yet.
* @retval PAPI_ENOEVST
* The EventSet has not been added yet.
*
* The PAPI_stop_counters() function stops the counters and copies the counts
* into the *values array.
* The counters must have been started by a previous call to PAPI_start_counters().
*
* \code
int Events[2] = { PAPI_TOT_CYC, PAPI_TOT_INS };
long long values[2];
if ( PAPI_start_counters( Events, 2 ) != PAPI_OK )
handle_error(1);
your_slow_code();
if ( PAPI_stop_counters( values, 2 ) != PAPI_OK )
handle_error(1);
* \endcode
*
* @see PAPI_read_counters() PAPI_start_counters() PAPI_set_opt()
*/
int
PAPI_stop_counters( long long *values, int array_len )
{
int retval;
HighLevelInfo *state = NULL;
if ( ( retval = _internal_check_state( &state ) ) != PAPI_OK )
return ( retval );
if ( state->running == 0 )
return ( PAPI_ENOTRUN );
if ( state->running == HL_START ) {
if ( array_len < state->num_evts || values == NULL) {
return ( PAPI_EINVAL );
} else {
retval = PAPI_stop( state->EventSet, values );
}
}
if ( state->running > HL_START ) {
long long tmp_values[3];
retval = PAPI_stop( state->EventSet, tmp_values );
}
if ( retval == PAPI_OK ) {
_internal_cleanup_hl_info( state );
PAPI_cleanup_eventset( state->EventSet );
}
APIDBG( "PAPI_stop_counters returns %d\n", retval );
return retval;
}
void
_papi_hwi_shutdown_highlevel( )
{
HighLevelInfo *state = NULL;
if ( PAPI_get_thr_specific( PAPI_HIGH_LEVEL_TLS, ( void ** ) &state ) ==
PAPI_OK ) {
if ( state )
papi_free( state );
}
}