#!/bin/bash
# BEGIN_ICS_COPYRIGHT8 ****************************************
#
# Copyright (c) 2015-2020, Intel Corporation
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of Intel Corporation nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# END_ICS_COPYRIGHT8 ****************************************
# [ICS VERSION STRING: unknown]
# perform installation verification on hosts in a cluster
# optional override of defaults
if [ -f /etc/opa/opafastfabric.conf ]
then
. /etc/opa/opafastfabric.conf
fi
. /usr/lib/opa/tools/opafastfabric.conf.def
. /usr/lib/opa/tools/ff_funcs
if [ x"$FF_IPOIB_SUFFIX" = xNONE ]
then
export FF_IPOIB_SUFFIX=""
fi
# identify how we are being run, affects valid options and usage
mode=invalid
cmd=`basename $0`
case $cmd in
opahostadmin|opaswitchadmin|opachassisadmin) mode=$cmd;;
esac
if [ "$mode" = "invalid" ]
then
echo "Invalid executable name for this file: $cmd; expected opahostadmin, opaswitchadmin or opachassisadmin" >&2
exit 1
fi
Usage_opahostadmin_full()
{
echo "Usage: opahostadmin [-c] [-i ipoib_suffix] [-f hostfile] [-h 'hosts'] " >&2
echo " [-r release] [-I install_options] [-U upgrade_options] [-d dir]" >&2
echo " [-T product] [-P packages] [-m netmask] [-S] operation ..." >&2
echo " or" >&2
echo " opahostadmin --help" >&2
echo " --help - produce full help text" >&2
echo " -c - clobber result files from any previous run before starting this run" >&2
echo " -i ipoib_suffix - suffix to apply to host names to create ipoib host names" >&2
echo " default is '$FF_IPOIB_SUFFIX'" >&2
echo " -f hostfile - file with hosts in cluster, default is $CONFIG_DIR/opa/hosts" >&2
echo " -h hosts - list of hosts to execute operation against" >&2
echo " -r release - IntelOPA release to load/upgrade to, default is $FF_PRODUCT_VERSION" >&2
echo " -d dir - directory to get product.release.tgz from for load/upgrade" >&2
echo " -I install_options - IntelOPA install options" >&2
echo " -U upgrade_options - IntelOPA upgrade options" >&2
echo " -T product - IntelOPA product type to install" >&2
echo " default is $FF_PRODUCT" >&2
echo " Other options include: IntelOPA-Basic.<distro>," >&2
echo " IntelOPA-IFS.<distro>" >&2
echo " Where <distro> is the distro and CPU, such as RHEL7-x86_64" >&2
echo " -P packages - IntelOPA packages to install, default is '$FF_PACKAGES'" >&2
echo " See IntelOPA INSTALL -C for a complete list of packages" >&2
echo " -m netmask - IPoIB netmask to use for configipoib" >&2
echo " -S - securely prompt for password for user on remote system" >&2
echo " operation - operation to perform. operation can be one or more of:" >&2
echo " load - initial install of all hosts" >&2
echo " upgrade - upgrade install of all hosts" >&2
echo " configipoib - create ifcfg-ib1 using host IP addr from /etc/hosts" >&2
echo " reboot - reboot hosts, ensure they go down and come back" >&2
echo " sacache - confirm sacache has all hosts in it" >&2
echo " ipoibping - verify this host can ping each host via IPoIB" >&2
echo " mpiperf - verify latency and bandwidth for each host" >&2
echo " mpiperfdeviation - check for latency and bandwidth tolerance" >&2
echo " deviation between hosts" >&2
echo " Environment:" >&2
echo " HOSTS - list of hosts, used if -h option not supplied" >&2
echo " HOSTS_FILE - file containing list of hosts, used in absence of -f and -h" >&2
echo " FF_MAX_PARALLEL - maximum concurrent operations" >&2
echo " FF_SERIALIZE_OUTPUT - serialize output of parallel operations (yes or no)" >&2
echo " FF_TIMEOUT_MULT - Multiplier for all timeouts associated with this command." >&2
echo " Used if the systems are slow for some reason." >&2
echo "for example:" >&2
echo " opahostadmin -c reboot" >&2
echo " opahostadmin upgrade" >&2
echo " opahostadmin -h 'elrond arwen' reboot" >&2
echo " HOSTS='elrond arwen' opahostadmin reboot" >&2
echo "During run the following files are produced:" >&2
echo " test.res - appended with summary results of run" >&2
echo " test.log - appended with detailed results of run" >&2
echo " save_tmp/ - contains a directory per failed operation with detailed logs" >&2
echo " test_tmp*/ - intermediate result files while operation is running" >&2
echo "-c option will remove all of the above" >&2
exit 0
}
Usage_opachassisadmin_full()
{
echo "Usage: opachassisadmin [-c] [-F chassisfile] [-H 'chassis'] " >&2
echo " [-P packages] [-a action] [-I fm_bootstate]" >&2
echo " [-S] [-d upload_dir] [-s securityfiles] operation ..." >&2
echo " or" >&2
echo " opachassisadmin --help" >&2
echo " --help - produce full help text" >&2
echo " -c - clobber result files from any previous run before starting this run" >&2
echo " -F chassisfile - file with chassis in cluster" >&2
echo " default is $CONFIG_DIR/opa/chassis" >&2
echo " -H chassis - list of chassis to execute operation against" >&2
echo " -P packages - filenames/directories of firmware" >&2
echo " images to install. For directories specified, all" >&2
echo " .pkg, .dpkg and .spkg files in directory tree will be used." >&2
echo " shell wildcards may also be used within quotes." >&2
echo " or for fmconfig, filename of FM config file to use" >&2
echo " or for fmgetconfig, filename to upload to (default" >&2
echo " opafm.xml)" >&2
echo " -a action - action for supplied file" >&2
echo " For Chassis upgrade:" >&2
echo " push - ensure firmware is in primary or alternate" >&2
echo " select - ensure firmware is in primary" >&2
echo " run - ensure firmware is in primary and running" >&2
echo " default is push" >&2
echo " For Chassis fmconfig:" >&2
echo " push - ensure config file is in chassis" >&2
echo " run - after push, restart FM on master, stop on slave" >&2
echo " runall - after push, restart FM on all MM" >&2
echo " For Chassis fmcontrol:" >&2
echo " stop - stop FM on all MM" >&2
echo " run - make sure FM running on master, stopped on slave" >&2
echo " runall - make sure FM running on all MM" >&2
echo " restart- restart FM on master, stop on slave" >&2
echo " restartall- restart FM on all MM" >&2
echo " For Chassis fmsecurityfiles:" >&2
echo " push - ensure FM security files are in chassis" >&2
echo " restart- after push, restart FM on master, stop on slave" >&2
echo " restartall - after push, restart FM on all MM" >&2
echo " -I fm_bootstate fmconfig and fmcontrol install options" >&2
echo " disable - disable FM start at chassis boot" >&2
echo " enable - enable FM start on master at chassis boot" >&2
echo " enableall - enable FM start on all MM at chassis boot" >&2
echo " -d upload_dir - directory to upload FM config files to, default is uploads" >&2
echo " -S - securely prompt for password for admin on chassis" >&2
echo " -s securityFiles - security files to install, default is '*.pem'" >&2
echo " For Chassis fmsecurityfiles, filenames/directories of" >&2
echo " security files to install. For directories specified," >&2
echo " all security files in directory tree will be used." >&2
echo " shell wildcards may also be used within quotes." >&2
echo " or for Chassis fmgetsecurityfiles, filename to upload to" >&2
echo " (default *.pem)" >&2
echo " operation - operation to perform. operation can be one or more of:" >&2
echo " reboot - reboot chassis, ensure they go down and come back" >&2
echo " configure - run wizard to set up chassis configuration" >&2
echo " upgrade - upgrade install of all chassis" >&2
echo " getconfig - get basic configuration of chassis" >&2
echo " fmconfig - FM config operation on all chassis" >&2
echo " fmgetconfig - Fetch FM config from all chassis" >&2
echo " fmcontrol - Control FM on all chassis" >&2
echo " fmsecurityfiles - FM security files operation on all chassis" >&2
echo " fmgetsecurityfiles - Fetch FM security files from all chassis" >&2
echo " Environment:" >&2
echo " CHASSIS - list of chassis, used if -H and -F option not supplied" >&2
echo " CHASSIS_FILE - file containing list of chassis, used in absence of -F and -H" >&2
echo " FF_MAX_PARALLEL - maximum concurrent operations" >&2
echo " FF_SERIALIZE_OUTPUT - serialize output of parallel operations (yes or no)" >&2
echo " FF_TIMEOUT_MULT - Multiplier for all timeouts associated with this command." >&2
echo " Used if the systems are slow for some reason." >&2
echo " UPLOADS_DIR - directory to upload to, used in absence of -d" >&2
echo "for example:" >&2
echo " opachassisadmin -c reboot" >&2
echo " opachassisadmin -P /root/ChassisFw4.2.0.0.1 upgrade" >&2
echo " opachassisadmin -H 'chassis1 chassis2' reboot" >&2
echo " CHASSIS='chassis1 chassis2' opachassisadmin reboot" >&2
echo " opachassisadmin -a run -P '*.pkg' upgrade" >&2
echo "During run the following files are produced:" >&2
echo " test.res - appended with summary results of run" >&2
echo " test.log - appended with detailed results of run" >&2
echo " save_tmp/ - contains a directory per failed operation with detailed logs" >&2
echo " test_tmp*/ - intermediate result files while operation is running" >&2
echo "-c option will remove all of the above" >&2
exit 0
}
Usage_opaswitchadmin_full()
{
echo "Usage: opaswitchadmin [-c] [-N 'nodes'] [-L nodefile] [-O] [-P packages]" >&2
echo " [-a action] [-t portsfile] [-p ports] operation ..." >&2
echo " or" >&2
echo " opaswitchadmin --help" >&2
echo " --help - produce full help text" >&2
echo " -c - clobber result files from any previous run before starting this run" >&2
echo " -N nodes - list of OPA switches to execute operation against" >&2
echo " -L nodefile - file with OPA switches in cluster" >&2
echo " default is $CONFIG_DIR/opa/switches" >&2
echo " -P packages - for upgrade, filename/directory of firmware" >&2
echo " image to install. For directory specified," >&2
echo " .emfw file in directory tree will be used." >&2
echo " shell wildcards may also be used within quotes." >&2
echo " -t portsfile - file with list of local HFI ports used to access" >&2
echo " fabric(s) for switch access, default is /etc/opa/ports" >&2
echo " -p ports - list of local HFI ports used to access fabric(s) for switch access" >&2
echo " default is 1st active port" >&2
echo " This is specified as hfi:port" >&2
echo " 0:0 = 1st active port in system" >&2
echo " 0:y = port y within system" >&2
echo " x:0 = 1st active port on HFI x" >&2
echo " x:y = HFI x, port y" >&2
echo " The first HFI in the system is 1. The first port on an HFI is 1." >&2
echo " -a action - action for firmware file for Switch upgrade" >&2
echo " select - ensure firmware is in primary" >&2
echo " run - ensure firmware is in primary and running" >&2
echo " default is select" >&2
echo " -O - override: for firmware upgrade, bypass version checks and force update" >&2
echo " unconditionally" >&2
echo " operation - operation to perform. operation can be one or more of:" >&2
echo " reboot - reboot switches, ensure they go down and come back" >&2
echo " configure - run wizard to set up switch configuration" >&2
echo " NOTE: You must reboot the switch for any new settings to be applied." >&2
echo " upgrade - upgrade install of all switches" >&2
echo " info - report f/w & h/w version, part number, and data rate capability of" >&2
echo " all OPA switches" >&2
echo " hwvpd - complete hardware VPD report of all OPA switches" >&2
echo " ping - ping all OPA switches - test for presence" >&2
echo " fwverify - report integrity of failsafe firmware of all OPA switches" >&2
echo " getconfig - get port configurations of a externally managed switch" >&2
echo " Environment:" >&2
echo " OPASWITCHES - list of nodes, used if -N and -L option not supplied" >&2
echo " OPASWITCHES_FILE - file containing list of nodes, used in absence of -N and" >&2
echo " -L" >&2
echo " FF_MAX_PARALLEL - maximum concurrent operations" >&2
echo " FF_SERIALIZE_OUTPUT - serialize output of parallel operations (yes or no)" >&2
echo " FF_TIMEOUT_MULT - Multiplier for all timeouts associated with this command." >&2
echo " Used if the systems are slow for some reason." >&2
echo "for example:" >&2
echo " opaswitchadmin -c reboot" >&2
echo " opaswitchadmin -P /root/ChassisFw4.2.0.0.1 upgrade" >&2
echo " opaswitchadmin -a run -P '*.emfw' upgrade" >&2
echo "During run the following files are produced:" >&2
echo " test.res - appended with summary results of run" >&2
echo " test.log - appended with detailed results of run" >&2
echo " save_tmp/ - contains a directory per failed operation with detailed logs" >&2
echo " test_tmp*/ - intermediate result files while operation is running" >&2
echo "-c option will remove all of the above" >&2
exit 0
}
Usage_full()
{
case $mode in
opahostadmin) Usage_opahostadmin_full;;
opachassisadmin) Usage_opachassisadmin_full;;
opaswitchadmin) Usage_opaswitchadmin_full;;
esac
}
Usage_opahostadmin()
{
echo "Usage: opahostadmin [-c] [-f hostfile] [-r release] [-d dir]" >&2
echo " [-T product] [-P packages] [-S] operation ..." >&2
echo " or" >&2
echo " opahostadmin --help" >&2
echo " --help - produce full help text" >&2
echo " -c - clobber result files from any previous run before starting this run" >&2
echo " -f hostfile - file with hosts in cluster, default is $CONFIG_DIR/opa/hosts" >&2
echo " -r release - IntelOPA release to load/upgrade to, default is $FF_PRODUCT_VERSION" >&2
echo " -d dir - directory to get product.release.tgz from for load/upgrade" >&2
echo " -T product - IntelOPA product type to install" >&2
echo " default is $FF_PRODUCT" >&2
echo " Other options include: IntelOPA-Basic.<distro>, IntelOPA-IFS.<distro>" >&2
echo " Where <distro> is the distro and CPU, such as RHEL7-x86_64" >&2
echo " -P packages - IntelOPA packages to install, default is '$FF_PACKAGES'" >&2
echo " See IntelOPA INSTALL -C for a complete list of packages" >&2
echo " -S - securely prompt for password for user on remote system" >&2
echo " operation - operation to perform. operation can be one or more of:" >&2
echo " load - initial install of all hosts" >&2
echo " upgrade - upgrade install of all hosts" >&2
echo " configipoib - create ifcfg-ib1 using host IP addr from /etc/hosts" >&2
echo " reboot - reboot hosts, ensure they go down and come back" >&2
echo " sacache - confirm sacache has all hosts in it" >&2
echo " ipoibping - verify this host can ping each host via IPoIB" >&2
echo " mpiperf - verify latency and bandwidth for each host" >&2
echo " mpiperfdeviation - check for latency and bandwidth tolerance" >&2
echo " deviation between hosts" >&2
echo "for example:" >&2
echo " opahostadmin -c reboot" >&2
echo " opahostadmin upgrade" >&2
echo "During run the following files are produced:" >&2
echo " test.res - appended with summary results of run" >&2
echo " test.log - appended with detailed results of run" >&2
echo " save_tmp/ - contains a directory per failed test with detailed logs" >&2
echo " test_tmp*/ - intermediate result files while test is running" >&2
echo "-c option will remove all of the above" >&2
exit 2
}
Usage_opachassisadmin()
{
echo "Usage: opachassisadmin [-c] [-F chassisfile] " >&2
echo " [-P packages] [-I fm_bootstate] [-a action]" >&2
echo " [-S] [-d upload_dir] [-s securityfiles] operation ..." >&2
echo " or" >&2
echo " opachassisadmin --help" >&2
echo " --help - produce full help text" >&2
echo " -c - clobber result files from any previous run before starting this run" >&2
echo " -F chassisfile - file with chassis in cluster" >&2
echo " default is $CONFIG_DIR/opa/chassis" >&2
echo " -P packages - filenames/directories of firmware" >&2
echo " images to install. For directories specified, all" >&2
echo " .pkg, .dpkg and .spkg files in directory tree will be used." >&2
echo " shell wildcards may also be used within quotes." >&2
echo " or for fmconfig, filename of FM config file to use" >&2
echo " or for fmgetconfig, filename to upload to (default" >&2
echo " opafm.xml)" >&2
echo " -a action - action for supplied file" >&2
echo " For Chassis upgrade:" >&2
echo " push - ensure firmware is in primary or alternate" >&2
echo " select - ensure firmware is in primary" >&2
echo " run - ensure firmware is in primary and running" >&2
echo " default is push" >&2
echo " For Chassis fmconfig:" >&2
echo " push - ensure config file is in chassis" >&2
echo " run - after push, restart FM on master, stop on slave" >&2
echo " runall - after push, restart FM on all MM" >&2
echo " For Chassis fmcontrol:" >&2
echo " stop - stop FM on all MM" >&2
echo " run - make sure FM running on master, stopped on slave" >&2
echo " runall - make sure FM running on all MM" >&2
echo " restart- restart FM on master, stop on slave" >&2
echo " restartall- restart FM on all MM" >&2
echo " For Chassis fmsecurityfiles:" >&2
echo " push - ensure FM security files are in chassis" >&2
echo " restart- after push, restart FM on master, stop on slave" >&2
echo " restartall - after push, restart FM on all MM" >&2
echo " -I fm_bootstate fmconfig and fmcontrol install options" >&2
echo " disable - disable FM start at chassis boot" >&2
echo " enable - enable FM start on master at chassis boot" >&2
echo " enableall - enable FM start on all MM at chassis boot" >&2
echo " -d upload_dir - directory to upload FM config files to, default is uploads" >&2
echo " -S - securely prompt for password for admin on chassis" >&2
echo " -s securityFiles - security files to install, default is '*.pem'" >&2
echo " For Chassis fmsecurityfiles, filenames/directories of" >&2
echo " security files to install. For directories specified," >&2
echo " all security files in directory tree will be used." >&2
echo " shell wildcards may also be used within quotes." >&2
echo " or for Chassis fmgetsecurityfiles, filename to upload to" >&2
echo " (default *.pem)" >&2
echo " operation - operation to perform. operation can be one or more of:" >&2
echo " reboot - reboot chassis, ensure they go down and come back" >&2
echo " configure - run wizard to set up chassis configuration" >&2
echo " upgrade - upgrade install of all chassis" >&2
echo " getconfig - get basic configuration of chassis" >&2
echo " fmconfig - FM config operation on all chassis" >&2
echo " fmgetconfig - Fetch FM config from all chassis" >&2
echo " fmcontrol - Control FM on all chassis" >&2
echo " fmsecurityfiles - FM security files operation on all chassis" >&2
echo " fmgetsecurityfiles - Fetch FM security files from all chassis" >&2
echo "for example:" >&2
echo " opachassisadmin -c reboot" >&2
echo " opachassisadmin -P /root/ChassisFw4.2.0.0.1 upgrade" >&2
echo " opachassisadmin -a run -P '*.pkg' upgrade" >&2
echo "During run the following files are produced:" >&2
echo " test.res - appended with summary results of run" >&2
echo " test.log - appended with detailed results of run" >&2
echo " save_tmp/ - contains a directory per failed operation with detailed logs" >&2
echo " test_tmp*/ - intermediate result files while operation is running" >&2
echo "-c option will remove all of the above" >&2
exit 2
}
Usage_opaswitchadmin()
{
echo "Usage: opaswitchadmin [-c] [-L nodefile] [-O] [-P packages]" >&2
echo " [-a action] operation ..." >&2
echo " or" >&2
echo " opaswitchadmin --help" >&2
echo " --help - produce full help text" >&2
echo " -c - clobber result files from any previous run before starting this run" >&2
echo " -L nodefile - file with OPA switches in cluster" >&2
echo " default is $CONFIG_DIR/opa/switches" >&2
echo " -P packages - for upgrade, filename/directory of firmware" >&2
echo " image to install. For directory specified," >&2
echo " .emfw file in directory tree will be used." >&2
echo " shell wildcards may also be used within quotes." >&2
echo " -a action - action for firmware file for Switch upgrade" >&2
echo " select - ensure firmware is in primary" >&2
echo " run - ensure firmware is in primary and running" >&2
echo " default is select" >&2
echo " -O - override: for firmware upgrade, bypass version checks and force update" >&2
echo " unconditionally" >&2
echo " operation - operation to perform. operation can be one or more of:" >&2
echo " reboot - reboot switches, ensure they go down and come back" >&2
echo " configure - run wizard to set up switch configuration" >&2
echo " NOTE: You must reboot the switch for any new settings to be applied." >&2
echo " upgrade - upgrade install of all switches" >&2
echo " info - report f/w & h/w version, part number, and data rate capability of" >&2
echo " all OPA switches" >&2
echo " hwvpd - complete hardware VPD report of all OPA switches" >&2
echo " ping - ping all OPA switches - test for presence" >&2
echo " fwverify - report integrity of failsafe firmware of all OPA switches" >&2
echo " getconfig - get port configurations of a externally managed switch" >&2
echo "for example:" >&2
echo " opaswitchadmin -c reboot" >&2
echo " opaswitchadmin -P /root/ChassisFw4.2.0.0.1 upgrade" >&2
echo " opaswitchadmin -a run -P '*.emfw' upgrade" >&2
echo "During run the following files are produced:" >&2
echo " test.res - appended with summary results of run" >&2
echo " test.log - appended with detailed results of run" >&2
echo " save_tmp/ - contains a directory per failed operation with detailed logs" >&2
echo " test_tmp*/ - intermediate result files while operation is running" >&2
echo "-c option will remove all of the above" >&2
exit 2
}
Usage()
{
case $mode in
opahostadmin) Usage_opahostadmin;;
opachassisadmin) Usage_opachassisadmin;;
opaswitchadmin) Usage_opaswitchadmin;;
esac
}
if [ x"$1" = "x--help" ]
then
Usage_full
fi
# default to install wrapper version
if [ -e /etc/opa/version_wrapper ]
then
CFG_RELEASE=`cat /etc/opa/version_wrapper 2>/dev/null`;
fi
if [ x"$CFG_RELEASE" = x ]
then
# if no wrapper, use version of FF itself as filled in at build time
# version string is filled in by prep, special marker format for it to use
CFG_RELEASE="THIS_IS_THE_ICS_VERSION_NUMBER:@(#)000.000.000.000B000"
fi
export CFG_RELEASE=`echo $CFG_RELEASE|sed -e 's/THIS_IS_THE_ICS_VERSION_NUMBER:@(#.//' -e 's/%.*//'`
# THIS_IS_THE_ICS_INTERNAL_VERSION_NUMBER:@(#)000.000.000.000B000
# test automation configuration defaults
export CFG_INIC_SUFFIX=
export CFG_IPOIB_SUFFIX="$FF_IPOIB_SUFFIX"
export CFG_USERNAME="$FF_USERNAME"
export CFG_PASSWORD="$FF_PASSWORD"
export CFG_ROOTPASS="$FF_ROOTPASS"
export CFG_LOGIN_METHOD="$FF_LOGIN_METHOD"
export CFG_CHASSIS_LOGIN_METHOD="$FF_CHASSIS_LOGIN_METHOD"
export CFG_CHASSIS_ADMIN_PASSWORD="$FF_CHASSIS_ADMIN_PASSWORD"
export CFG_FAILOVER="n"
export CFG_FTP_SERVER=""
export CFG_IPOIB="y"
export CFG_IPOIB_MTU="2030"
export CFG_IPOIB_COMBOS=TBD
export CFG_INIC=n
export CFG_SDP=n
export CFG_SRP=n
export CFG_MPI=y
export CFG_UDAPL=n
export TEST_TIMEOUT_MULT="$FF_TIMEOUT_MULT"
export TEST_RESULT_DIR="$FF_RESULT_DIR"
export TEST_MAX_PARALLEL="$FF_MAX_PARALLEL"
export TEST_CONFIG_FILE="/dev/null"
export TL_DIR=/usr/lib/opa/tools
export TEST_IDENTIFY=no
export TEST_SHOW_CONFIG=no
export TEST_SHOW_START=yes
export CFG_PRODUCT="${FF_PRODUCT:-IntelOPA-Basic}"
export CFG_INSTALL_OPTIONS="$FF_INSTALL_OPTIONS"
export CFG_UPGRADE_OPTIONS="$FF_UPGRADE_OPTIONS"
export CFG_IPOIB_NETMASK="$FF_IPOIB_NETMASK"
export CFG_IPOIB_CONNECTED="$FF_IPOIB_CONNECTED"
export CFG_MPI_ENV="$FF_MPI_ENV"
export TEST_SERIALIZE_OUTPUT="$FF_SERIALIZE_OUTPUT"
clobber=n
host=0
chassis=0
opaswitch=0
dir=.
packages="notsupplied"
action=default
Sopt=n
sopt=n
bypassSwitchCheck=n
fwOverride=n
securityFiles="notsupplied"
case $mode in
opahostadmin) host=1; options='cd:h:f:i:r:I:U:P:T:m:S';;
opachassisadmin) chassis=1; options='a:I:cH:F:P:d:Ss:';;
opaswitchadmin) opaswitch=1; options='a:Bcd:P:p:t:L:N:O';;
esac
while getopts "$options" param
do
case $param in
a)
action="$OPTARG";;
B)
bypassSwitchCheck=y;;
c)
clobber=y;;
d)
dir="$OPTARG"
export UPLOADS_DIR="$dir";;
h)
host=1
HOSTS="$OPTARG";;
H)
chassis=1
CHASSIS="$OPTARG";;
N)
opaswitch=1
OPASWITCHES="$OPTARG";;
f)
host=1
HOSTS_FILE="$OPTARG";;
F)
chassis=1
CHASSIS_FILE="$OPTARG";;
L)
opaswitch=1
OPASWITCHES_FILE="$OPTARG";;
i)
export CFG_IPOIB_SUFFIX="$OPTARG"
export FF_IPOIB_SUFFIX="$OPTARG";;
r)
export FF_PRODUCT_VERSION="$OPTARG";;
I)
export CFG_INSTALL_OPTIONS="$OPTARG";;
U)
export CFG_UPGRADE_OPTIONS="$OPTARG";;
P)
packages="$OPTARG";;
T)
export CFG_PRODUCT="$OPTARG";;
m)
export CFG_IPOIB_NETMASK="$OPTARG";;
p)
export PORTS="$OPTARG";;
t)
export PORTS_FILE="$OPTARG";;
s)
securityFiles="$OPTARG";;
S)
Sopt=y;;
O)
fwOverride=y;;
?)
Usage;;
esac
done
shift $((OPTIND -1))
if [ $# -lt 1 ]
then
Usage
fi
for tkn in $*
do
if [[ $tkn == -* ]]
then
Usage
fi
done
# given optarg selections, this error should not be able to happen
if [[ $(($chassis+$host+$opaswitch)) -gt 1 ]]
then
echo "$cmd: conflicting arguments, more than one of host, chassis or opaswitches specified" >&2
Usage
fi
# given mode checks, this error should not be able to happen
if [[ $(($chassis+$host+$opaswitch)) -eq 0 ]]
then
host=1
fi
if [ ! -d "$FF_RESULT_DIR" ]
then
echo "$cmd: Invalid FF_RESULT_DIR: $FF_RESULT_DIR: No such directory" >&2
exit 1
fi
if [ $chassis -eq 1 ]
then
check_chassis_args $cmd
if [ "$action" = "default" ]
then
action=push
fi
if [ "$CFG_INSTALL_OPTIONS" = "$FF_INSTALL_OPTIONS" ]
then
export CFG_INSTALL_OPTIONS=
fi
elif [ $opaswitch -eq 1 ]
then
check_ib_transport_args $cmd
check_ports_args $cmd
if [ "$action" = "default" ]
then
action=select
fi
else
check_host_args $cmd
if [ "$packages" = "notsupplied" ]
then
packages="$FF_PACKAGES"
fi
if [ "x$packages" != "x" ]
then
for p in $packages
do
CFG_INSTALL_OPTIONS="$CFG_INSTALL_OPTIONS -i $p"
done
fi
if [ "x$CFG_INSTALL_OPTIONS" = "x" ]
then
CFG_INSTALL_OPTIONS='-i iba -i ipoib -i mpi'
fi
fi
export CFG_HOSTS="$HOSTS"
export CFG_CHASSIS="$CHASSIS"
export CFG_OPASWITCHES="$OPASWITCHES"
export CFG_PORTS="$PORTS"
export CFG_MPI_PROCESSES="$HOSTS"
#export CFG_PERF_PAIRS=TBD
export CFG_SCPFROMDIR="$dir"
if [ x"$FF_PRODUCT_VERSION" != x ]
then
CFG_RELEASE="$FF_PRODUCT_VERSION"
fi
# use NONE so ff_function's inclusion of defaults works properly
if [ x"$FF_IPOIB_SUFFIX" = x ]
then
export FF_IPOIB_SUFFIX="NONE"
export CFG_IPOIB_SUFFIX="NONE"
fi
if [ "$clobber" = "y" ]
then
( cd $TEST_RESULT_DIR; rm -rf test.res save_tmp test.log test_tmp* *.dmp )
fi
# create an empty test.log file
( cd $TEST_RESULT_DIR; >> test.log )
run_test()
{
# $1 = test suite name
TCLLIBPATH="$TL_DIR /usr/lib/tcl" expect -f $TL_DIR/$1.exp | tee -a $TEST_RESULT_DIR/test.res
}
if [ $chassis -eq 1 ]
then
if [ "$Sopt" = y ]
then
read -sp "Password for admin on all chassis: " password
echo
export CFG_CHASSIS_ADMIN_PASSWORD="$password"
fi
for test_suite in $*
do
case $test_suite in
reboot)
run_test chassis_$test_suite;;
configure)
export CFG_CFGTEMPDIR="$(mktemp -d --tmpdir opacfgtmp.XXXXXX)"
# Update traps to delete all temporary directories.
trap "rm -rf $CFG_CFGTEMPDIR; exit 1" 1 2 3 9 15
trap "rm -rf $CFG_CFGTEMPDIR" EXIT
/usr/lib/opa/tools/chassis_setup $CFG_CFGTEMPDIR $CFG_CHASSIS
if [ $? = 0 ]
then
export SYSLOG_SERVER=`grep "Syslog Server IP_Address" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export SYSLOG_PORT=`grep "Syslog Port" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export SYSLOG_FACILITY=`grep "Syslog Facility" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export NTP_SERVER=`grep "NTP Server" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export TZ_OFFSET=`grep "Timezone offset" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export DST_START=`grep "Start DST" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export DST_END=`grep "End DST" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export LINKWIDTH_SETTING=`grep "Link Width Selection" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export SET_NAME=`grep "Set OPA Node Desc" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
export LINKCRCMODE=`grep "Link CRC Mode" $CFG_CFGTEMPDIR/.chassisSetup.out | cut -d : -f 2`
run_test chassis_$test_suite
else
echo "Chassis setup wizard exited abnormally ... aborting"
fi;;
getconfig)
run_test chassis_$test_suite;;
upgrade)
if [ "$packages" = "notsupplied" -o "$packages" = "" ]
then
echo "$cmd: -P option required for chassis upgrade" >&2
Usage
fi
if [ "$action" != "push" -a "$action" != "select" -a "$action" != "run" ]
then
echo "$cmd: Invalid firmware upgrade action: $action" >&2
Usage
fi
# check fw files exist, expand directories
CFG_FWFILES=""
for fwfile in $packages
do
# expand directory, also filters files without .pkg/.dpkg/.spkg suffix
# this also expands wildcards in "$packages"
fwfiles=`find $fwfile -type f -name '*.pkg'`
fwfiles="$fwfiles `find $fwfile -type f -name '*.[ds]pkg'`"
if [ $? != 0 -o x"$fwfiles" == x -o x"$fwfiles" == x" " ]
then
echo "$cmd: $fwfile: No .pkg nor .dpkg nor .spkg files found" >&2
Usage
fi
CFG_FWFILES="$CFG_FWFILES $fwfiles"
done
export CFG_FWFILES
export CFG_FWACTION="$action"
run_test chassis_$test_suite;;
fmconfig)
if [ "$packages" = "notsupplied" -o "$packages" = "" ]
then
echo "$cmd: -P option required for chassis fmconfig" >&2
Usage
fi
if [ "$action" != "push" -a "$action" != "run" -a "$action" != "runall" ]
then
echo "$cmd: Invalid FM config action: $action" >&2
Usage
fi
if [ "$CFG_INSTALL_OPTIONS" != "" -a "$CFG_INSTALL_OPTIONS" != "disable" -a "$CFG_INSTALL_OPTIONS" != "enable" -a "$CFG_INSTALL_OPTIONS" != "enableall" ]
then
echo "$cmd: Invalid FM bootstate: $CFG_INSTALL_OPTIONS" >&2
Usage
fi
export CFG_FMFILE="$packages"
export CFG_FWACTION="$action"
run_test chassis_$test_suite;;
fmcontrol)
if [ "$action" != "stop" -a "$action" != "run" -a "$action" != "runall" -a "$action" != "restart" -a "$action" != "restartall" ]
then
echo "$cmd: Invalid FM config action: $action" >&2
Usage
fi
if [ "$CFG_INSTALL_OPTIONS" != "" -a "$CFG_INSTALL_OPTIONS" != "disable" -a "$CFG_INSTALL_OPTIONS" != "enable" -a "$CFG_INSTALL_OPTIONS" != "enableall" ]
then
echo "$cmd: Invalid FM bootstate: $CFG_INSTALL_OPTIONS" >&2
fi
export CFG_FWACTION="$action"
run_test chassis_$test_suite;;
fmgetconfig)
if [ "$packages" = "notsupplied" -o "$packages" = "" ]
then
packages="opafm.xml"
#echo "$cmd: -P option required for chassis fmgetconfig" >&2
#Usage
fi
export CFG_FMFILE="$packages"
run_test chassis_$test_suite;;
fmsecurityfiles)
if [ "$securityFiles" = "notsupplied" -o "$securityFiles" = "" ]
then
echo "$cmd: -s option required for chassis fmsecurityfiles" >&2
Usage
fi
if [ "$action" != "push" -a "$action" != "restart" -a "$action" != "restartall" ]
then
echo "$cmd: Invalid security files upgrade action: $action" >&2
Usage
fi
# check security files exist, expand directories
CFG_SECFILES=""
for securityfile in $securityFiles
do
# expand directory, also filters files without .pem suffix
# this also expands wildcards in "$securityFiles"
securityfiles=`find $securityfile -type f -name '*.pem'`
if [ $? != 0 -o x"$securityfiles" == x ]
then
echo "$cmd: $securityfile: No .pem files found" >&2
Usage
fi
CFG_SECFILES="$CFG_SECFILES $securityfiles"
done
export CFG_SECFILES
export CFG_SECACTION="$action"
run_test chassis_$test_suite;;
fmgetsecurityfiles)
if [ "$securityFiles" = "notsupplied" -o "$securityFiles" = "" ]
then
securityFiles="*.pem"
fi
export CFG_SECFILE="$securityFiles"
run_test chassis_$test_suite;;
*)
echo "Invalid Operation name: $test_suite" >&2
Usage;
;;
esac
done
elif [ $opaswitch -eq 1 ]
then
if [ "$bypassSwitchCheck" = y ]
then
export CFG_SWITCH_BYPASS_SWITCH_CHECK=y
else
export CFG_SWITCH_BYPASS_SWITCH_CHECK=n
fi
for test_suite in $*
do
case $test_suite in
reboot)
run_test switch_$test_suite;;
info)
run_test switch_$test_suite;;
hwvpd)
run_test switch_$test_suite;;
ping)
run_test switch_$test_suite;;
fwverify)
run_test switch_$test_suite;;
configure)
CFG_CFGTEMPDIR="$(mktemp -d --tmpdir opacfgtmp.XXXXXX)"
# Update traps to delete all temporary directories.
trap "rm -rf $CFG_CFGTEMPDIR; exit 1" 1 2 3 9 15
trap "rm -rf $CFG_CFGTEMPDIR" EXIT
/usr/lib/opa/tools/switch_setup $CFG_CFGTEMPDIR
if [ $? = 0 ]
then
export LINKWIDTH_SETTING=`grep "Link Width Selection" $CFG_CFGTEMPDIR/.switchSetup.out | cut -d : -f 2`
export NODEDESC_SETTING=`grep "Node Description Selection" $CFG_CFGTEMPDIR/.switchSetup.out | cut -d : -f 2`
export FMENABLED_SETTING=`grep "FM Enabled Selection" $CFG_CFGTEMPDIR/.switchSetup.out | cut -d : -f 2`
export LINKCRCMODE_SETTING=`grep "Link CRC Mode Selection" $CFG_CFGTEMPDIR/.switchSetup.out | cut -d : -f 2`
run_test switch_$test_suite
else
echo "Ext mgd switch setup wizard exited abnormally ... aborting"
fi;;
upgrade)
if [ "$packages" = "notsupplied" -o "$packages" = "" ]
then
echo "$cmd: -P option required for switch upgrade" >&2
Usage
fi
if [ "$action" != "select" -a "$action" != "run" ]
then
echo "$cmd: Invalid firmware upgrade action: $action" >&2
echo "$cmd: 'run' and 'select' are the only supported actions" >&2
Usage
fi
# check fw files exist, expand directories
CFG_FWFILES=""
CFG_FWBINFILES=""
CFG_TMPDIR_LIST=""
for fwfile in $packages
do
echo "$cmd: processing package file: $fwfile" >&2
# expand directory, also filters files without .emfw suffix
# this also expands wildcards in "$packages"
fwfiles=`find $fwfile -type f -name '*.emfw'`
if [ $? != 0 -o x"$fwfiles" == x ]
then
echo "$cmd: $fwfile: No .emfw files found" >&2
Usage
fi
CFG_FWFILES="$fwfiles"
echo "$cmd: found package file: $fwfiles" >&2
# copy file to temporary directory
for tarball in $CFG_FWFILES
do
# create temporary work directory
CFG_FWFILE="$tarball"
CFG_FWTEMPDIR="$(mktemp -d --tmpdir opafwtmp.XXXXXX)"
# Update traps to delete all temporary directories.
CFG_TMPDIR_LIST="$CFG_TMPDIR_LIST $CFG_FWTEMPDIR"
trap "rm -rf $CFG_TMPDIR_LIST; exit 1" 1 2 3 9 15
trap "rm -rf $CFG_TMPDIR_LIST" EXIT
CFG_FWRELEASEFILE="$CFG_FWTEMPDIR/release.emfw.txt"
cp -f $tarball $CFG_FWTEMPDIR
# remove previous firmware image .bin files, and extract
# .bin files from .emfw file.
rm -rf '$CFG_FWTEMPDIR/*.bin'
tar --directory $CFG_FWTEMPDIR -zxf $tarball
# search for text file that contains release related information
# about the firmware image .bin files
if [ ! -f "$CFG_FWRELEASEFILE" ]
then
echo "$cmd: No release.emfw.txt file found for package file: $tarball" >&2
Usage
fi
fwreleaseinfo=`cat $CFG_FWRELEASEFILE`
CFG_FWRELINFO="$fwreleaseinfo"
fwreleaseversioninfo=`cat $CFG_FWRELEASEFILE | grep _ | sed "s/_/./g"`
CFG_FWRELEASEVERSIONINFO=$fwreleaseversioninfo
CFG_FWSPEED=`cat $CFG_FWRELEASEFILE | grep DR`
if [ "$CFG_FWSPEED" = "" ]
then
CFG_FWSPEED="QDR"
fi
CFG_FWASICVER=`grep "V[0-9]" $CFG_FWRELEASEFILE`
if [ "$CFG_FWASICVER" = "" ]
then
CFG_FWASICVER="V0"
fi
CFG_SWITCH_DEVICE=`head -n 1 $CFG_FWRELEASEFILE`
# expand directory, also filters files without .bin suffix
fwfiles=`find $CFG_FWTEMPDIR -type f -name '*.bin'`
if [ $? != 0 -o x"$fwfiles" == x ]
then
echo "$cmd: $tarball: No .bin files found" >&2
Usage
fi
CFG_FWBINFILES="$fwfiles"
CFG_FWOVERRIDE=$fwOverride
export CFG_FWFILES
export CFG_FWFILE
export CFG_FWBINFILES
export CFG_FWTEMPDIR
export CFG_FWRELINFO
export CFG_FWSPEED
export CFG_FWASICVER
export CFG_SWITCH_DEVICE
export CFG_FWRELEASEVERSIONINFO
export CFG_FWACTION="$action"
export CFG_FWOVERRIDE
echo "$cmd: upgrading with switch firmware image: $tarball : version $fwreleaseversioninfo" >&2
run_test switch_$test_suite
done
done
;;
getconfig)
run_test switch_$test_suite;;
*)
echo "Invalid Operation name: $test_suite" >&2
Usage;
;;
esac
done
else
if [ "$Sopt" = y ]
then
read -sp "Password for $CFG_USERNAME on all hosts: " password
echo
export CFG_PASSWORD="$password"
if [ "$CFG_USERNAME" != "root" ]
then
read -sp "Password for root on all hosts: " password
echo
export CFG_ROOTPASS="$password"
else
export CFG_ROOTPASS="$CFG_PASSWORD"
fi
fi
for test_suite in $*
do
case $test_suite in
load|upgrade)
if [ ! -f "$dir/$CFG_PRODUCT.$CFG_RELEASE.tgz" ]
then
echo "$cmd: $dir/$CFG_PRODUCT.$CFG_RELEASE.tgz not found" >&2
exit 1
fi
run_test $test_suite;;
reboot|sacache|configipoib|ipoibping|mpiperf|mpiperfdeviation)
run_test $test_suite;;
*)
echo "Invalid Operation name: $test_suite" >&2
Usage;
;;
esac
done
fi