#! /bin/bash
# BEGIN_ICS_COPYRIGHT8 ****************************************
#
# Copyright (c) 2015, Intel Corporation
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of Intel Corporation nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# END_ICS_COPYRIGHT8 ****************************************
# [ICS VERSION STRING: unknown]
# initialize
# BASE PATH TO MPI EXECUTABLES: To use an alternate location,
# either edit this line or set MPICH_PREFIX in your environment.
# see iba_select_mpi for the set of default MPI selections
# default to MPI used for build
MPICH_PREFIX=
mpirunfile=
vfselectmethod=sid_qlc
vfname=
vfsid=
dsprtg=
qname=
mrailmap=
MPI_CMD_ARGS=
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$MPICH_PREFIX/lib64/
LSB_DJOB_NUMPROC=3
# Usage - display usage syntax and exit
Usage()
{
echo "Usage: submit.openmpi.job [-p num_proceses] [-V vf_select_method] [-s vf_sid] [-n vf_name] [-d dsp_rtg] [-q queue_name] [-m <unit:port>[,<unit:port>]] mpi_run_file"
echo " where vf_select_method is one of:"
echo " vf_name: Name of virtual fabric - use -n to define vf name"
echo " sid : ServiceId of virtual fabric - use -s option to define service id"
echo " sid_qlc: ServiceId of virtual fabric - use -s option to define service id, uses dist_sa (default)"
echo " where dsp_rtg is one of: 1-adaptive, 2-static_src, 3-static_dest, 4-static_base"
echo " where queue_name is a valid LSF queue name (use bqueues for a list)"
echo " where unit:port is the unit/port pair is used to setup a rail"
exit 2
}
# process opts and args
while getopts V:s:n:d:p:q:m: param
do
case $param in
V)
export vfselectmethod=$OPTARG;;
s)
export vfsid=$OPTARG;;
n)
export vfname=$OPTARG;;
d)
export dsprtg=$OPTARG;;
p)
export LSB_DJOB_NUMPROC=$OPTARG;;
q)
export qname=$OPTARG;;
m)
export mrailmap=$OPTARG;;
?)
Usage
esac
done
shift $(($OPTIND -1))
mpirunfile=$1
# validate args
if [ "$mpirunfile" = "" ]
then
echo "Must provide an mpi_run_file"
Usage
fi
if [ ! -f $mpirunfile ]
then
echo "mpi_run_file \"$mpirunfile\" does not exist"
Usage
fi
if [ "$dsprtg" != "" ]
then
if [ $dsprtg -lt 1 -o $dsprtg -gt 4 ]
then
echo dispersive routing value must be between 1 and 4
Usage
fi
fi
# get opagetvf_func definition
. /usr/bin/opagetvf_env
case $vfselectmethod in
vf_name)
opagetvf2_func "-d '$vfname'" OMPI_MCA_btl_openib_pkey OMPI_MCA_btl_openib_ib_service_level OMPI_MCA_btl_openib_mtu
if [ $? -ne 0 ]
then
echo "Failed to get environment variables for VF with Name \"$vfname\""
Usage
fi
export OMPI_MCA_mtl_psm_ib_pkey=$OMPI_MCA_btl_openib_pkey
export OMPI_MCA_mtl_psm_ib_service_level=$OMPI_MCA_btl_openib_ib_service_level
export PSM_MTU=$OMPI_MCA_btl_openib_mtu;;
sid)
opagetvf2_func "-S '$vfsid'" OMPI_MCA_btl_openib_pkey OMPI_MCA_btl_openib_ib_service_level OMPI_MCA_btl_openib_mtu
if [ $? -ne 0 ]
then
echo "Failed to get environment variables for VF with SID \"$vfsid\""
Usage
fi
export OMPI_MCA_mtl_psm_ib_pkey=$OMPI_MCA_btl_openib_pkey
export OMPI_MCA_mtl_psm_ib_service_level=$OMPI_MCA_btl_openib_ib_service_level
export PSM_MTU=$OMPI_MCA_btl_openib_mtu;;
sid_qlc)
export OMPI_MCA_mtl_psm_path_query=opp
export OMPI_MCA_mtl_psm_ib_service_id=$vfsid;;
*)
echo Unknown vfselectmethod $vfselectmethod
Usage;;
esac
if [ "$dsprtg" != "" ]
then
case $dsprtg in
1)
export routing=adaptive;;
2)
export routing=static_src;;
3)
export routing=static_dest;;
4)
export routing=static_base;;
esac
export MPI_CMD_ARGS="PSM_PATH_SELECTION=$routing"
fi
if [ "$MPICH_PREFIX" = "" ]
then
. /usr/bin/iba_select_mpi
if ! valid_mpich_prefix
then
find_mpi $prefix/mpi/gcc/openmpi*qlc
fi
fi
if [ "$mrailmap" != "" ]
then
. /usr/bin/opagetvf_env
iba_getpsm_func $mrailmap
if [ $? -ne 0 ]
then
echo "Failed to get environment variable for PSM with value \"$mrailmap\""
Usage
else
export MPI_CMD_ARGS="$MPI_CMD_ARGS PSM_MULTIRAIL=1 PSM_MULTIRAIL_MAP=$mrailmap"
fi
fi
temp=
for arg in $MPI_CMD_ARGS
do
temp="$temp -x '$arg'"
done
MPI_CMD_ARGS="$temp"
# submit the job
echo "#! /bin/sh" > .run.openmpi-q
echo "#BSUB -n $LSB_DJOB_NUMPROC" >> .run.openmpi-q
echo "#BSUB -o %J.out" >> .run.openmpi-q
echo "#BSUB -e %J.err" >> .run.openmpi-q
if [ "$qname" != "" ]
then
echo "#BSUB -q $qname" >> .run.openmpi-q
fi
echo $MPICH_PREFIX/bin/mpirun -np $LSB_DJOB_NUMPROC -hostfile \$LSB_DJOB_HOSTFILE $MPI_CMD_ARGS $* >> .run.openmpi-q
bsub < .run.openmpi-q
rm .run.openmpi-q
exit 0