#!/bin/bash
# BEGIN_ICS_COPYRIGHT8 ****************************************
#
# Copyright (c) 2015-2017, Intel Corporation
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of Intel Corporation nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# END_ICS_COPYRIGHT8 ****************************************
# [ICS VERSION STRING: unknown]
# Analyze fabric, chassis and SMs for errors and/or changes relative to baseline
# optional override of defaults
if [ -f /etc/opa/opafastfabric.conf ]
then
. /etc/opa/opafastfabric.conf
fi
. /usr/lib/opa/tools/opafastfabric.conf.def
. /usr/lib/opa/tools/ff_funcs
trap "exit 1" SIGHUP SIGTERM SIGINT
Usage_full()
{
echo "Usage: opaallanalysis [-b|-e] [-s] [-d dir] [-c file] [-t portsfile] [-p ports]" >&2
echo " [-F chassisfile] [-H 'chassis']">&2
echo " [-G esmchassisfile] [-E 'esmchassis']" >&2
echo " [-T topology_input]" >&2
echo " or" >&2
echo " opaallanalysis --help" >&2
echo " --help - produce full help text" >&2
echo " -b - baseline mode, default is compare/check mode" >&2
echo " -e - evaluate health only, default is compare/check mode" >&2
echo " -s - save history of failures (errors/differences)" >&2
echo " -d dir - top level directory for saving baseline and history of failed checks" >&2
echo " default is /var/usr/lib/opa/analysis" >&2
echo " -c file - error thresholds config file" >&2
echo " default is $CONFIG_DIR/opa/opamon.conf" >&2
echo " -t portsfile - file with list of local HFI ports used to access" >&2
echo " fabric(s) for analysis, default is $CONFIG_DIR/opa/ports" >&2
echo " -p ports - list of local HFI ports used to access fabric(s) for analysis" >&2
echo " default is 1st active port" >&2
echo " This is specified as hfi:port" >&2
echo " 0:0 = 1st active port in system" >&2
echo " 0:y = port y within system" >&2
echo " x:0 = 1st active port on HFI x" >&2
echo " x:y = HFI x, port y" >&2
echo " The first HFI in the system is 1. The first port on an HFI is 1." >&2
echo " -T topology_input - name of a topology input file to use." >&2
echo " Any %P markers in this filename will be replaced with the" >&2
echo " hfi:port being operated on (such as 0:0 or 1:2)" >&2
echo " default is $CONFIG_DIR/opa/topology.%P.xml" >&2
echo " if NONE is specified, will not use any topology_input files" >&2
echo " See opareport for more information on topology_input files" >&2
echo " -F chassisfile - file with chassis in cluster" >&2
echo " default is $CONFIG_DIR/opa/chassis" >&2
echo " -H chassis - list of chassis to analyze" >&2
echo " -G esmchassisfile - file with SM chassis in cluster" >&2
echo " default is $CONFIG_DIR/opa/esm_chassis" >&2
echo " -E esmchassis - list of SM chassis to analyze" >&2
echo " Environment:" >&2
echo " PORTS - list of ports, used in absence of -t and -p" >&2
echo " PORTS_FILE - file containing list of ports, used in absence of -t and -p" >&2
echo " FF_TOPOLOGY_FILE - file containing topology_input, used in absence of -T" >&2
echo " CHASSIS - list of chassis, used if -F and -H options not supplied" >&2
echo " CHASSIS_FILE - file containing list of chassis, used if -F and -H options not" >&2
echo " supplied" >&2
echo " ESM_CHASSIS - list of SM chassis, used if -G and -E not supplied" >&2
echo " ESM_CHASSIS_FILE - file containing list of SM chassis, used if -G and -E not" >&2
echo " supplied" >&2
echo " FF_ANALYSIS_DIR - top level directory for baselines and failed health checks" >&2
echo " FF_CHASSIS_CMDS - list of commands to issue during analysis," >&2
echo " unused if -e option supplied" >&2
echo " FF_CHASSIS_HEALTH - single command to issue to check overall health during analysis," >&2
echo " unused if -b option supplied" >&2
echo "for example:" >&2
echo " opaallanalysis" >&2
echo " opaallanalysis -p '1:1 1:2 2:1 2:2'" >&2
exit 0
}
Usage()
{
echo "Usage: opaallanalysis [-b|-e] [-s] [-F chassisfile] [-G esmchassisfile]" >&2
echo " or" >&2
echo " opaallanalysis --help" >&2
echo " --help - produce full help text" >&2
echo " -b - baseline mode, default is compare/check mode" >&2
echo " -e - evaluate health only, default is compare/check mode" >&2
echo " -s - save history of failures (errors/differences)" >&2
echo " -F chassisfile - file with chassis in cluster" >&2
echo " default is $CONFIG_DIR/opa/chassis" >&2
echo " -G esmchassisfile - file with SM chassis in cluster" >&2
echo " default is $CONFIG_DIR/opa/esm_chassis" >&2
echo "for example:" >&2
echo " opaallanalysis" >&2
exit 2
}
if [ x"$1" = "x--help" ]
then
Usage_full
fi
getbaseline=n
healthonly=n
savehistory=n
opts=""
configfile=$CONFIG_DIR/opa/opamon.conf
status=ok
while getopts besd:c:p:t:T:H:F:E:G: param
do
case $param in
b) opts="$opts -b"; getbaseline=y;;
e) opts="$opts -e"; healthonly=y;;
s) opts="$opts -s"; savehistory=y;;
d) export FF_ANALYSIS_DIR="$OPTARG";;
c) configfile="$OPTARG";;
p) export PORTS="$OPTARG";;
t) export PORTS_FILE="$OPTARG";;
T) export FF_TOPOLOGY_FILE="$OPTARG";;
H) export CHASSIS="$OPTARG";;
F) export CHASSIS_FILE="$OPTARG";;
E) export ESM_CHASSIS="$OPTARG";;
G) export ESM_CHASSIS_FILE="$OPTARG";;
?) Usage;;
esac
done
shift $((OPTIND -1))
if [ $# -ge 1 ]
then
Usage
fi
if [ "$getbaseline" = y -a "$healthonly" = y ]
then
Usage
fi
# first verify all arguments
for i in $FF_ALL_ANALYSIS
do
case $i in
fabric)
check_ports_args opaallanalysis;;
chassis)
check_chassis_args opaallanalysis;;
hostsm)
;;
esm)
check_esm_chassis_args opaallanalysis;;
*)
echo "opaallanalysis: Invalid setting in FF_ALL_ANALYSIS: $i" >&2
exit 1;;
esac
done
export FF_CURTIME="${FF_CURTIME:-`date +%Y-%m-%d-%H:%M:%S`}"
#-----------------------------------------------------------------
for i in $FF_ALL_ANALYSIS
do
case $i in
fabric)
/usr/sbin/opafabricanalysis $opts -c "$configfile"
if [ $? != 0 ]
then
status=bad
fi
;;
chassis)
/usr/sbin/opachassisanalysis $opts
if [ $? != 0 ]
then
status=bad
fi
;;
hostsm)
/usr/sbin/opahostsmanalysis $opts
if [ $? != 0 ]
then
status=bad
fi
;;
esm)
/usr/sbin/opaesmanalysis $opts
if [ $? != 0 ]
then
status=bad
fi
;;
esac
done
if [ "$status" != "ok" ]
then
if [[ $healthonly == n ]]
then
echo "opaallanalysis: Possible errors or changes found" >&2
else
echo "opaallanalysis: Possible errors found" >&2
fi
exit 1
else
if [[ $getbaseline == n ]]
then
echo "opaallanalysis: All OK"
else
echo "opaallanalysis: Baselined"
fi
exit 0
fi