# BEGIN_ICS_COPYRIGHT8 ****************************************
#
# Copyright (c) 2015, Intel Corporation
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of Intel Corporation nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# END_ICS_COPYRIGHT8 ****************************************
# [ICS VERSION STRING: unknown]
#=============================================================================#
# Test Suite Description:
#-----------------------------------------------------------------------------#
## configure
## -------
## configure all chassis
#=============================================================================#
# manditory setup
log_user 0; # disable detailed logging to stdout
# uncomment the following to debug the test
#strace 20
#log_user 1
#exp_internal 1
#cmd_trace on
#strace 4
set install_exit_code 0
proc suite_setup {} {
# example of conditional setup
#test_execute {load populate} {
#do some installation or configuration stuff
#}
}
proc case_setup {} {
# setup to do at start of each test case
# Usage:
# pass as argument to start_suite
# Arguments:
# None
# This procedure will be run at the start of every test case
# It provides an opportunity for uniform cleanup/setup for each test case
}
proc case_cleanup { failed } {
# cleanup to do after each test case
# Usage:
# pass as argument to start_suite
# Arguments:
# failed - set to 1 if test case failed in which case additional
# information/files may be desired in test_tmp
# set to 0 if test case passed
# This procedure will be run at the end of every test case
# It provides an opportunity for uniform cleanup after each test case
global env
test_execute {} {
if { $failed } {
global chassis
# could put cleanup here
target_chassis_admin_sh_exit
}
}
}
array set ch_config_link_crc {
0 "16b"
1 "14b_or_16b"
2 "48b_or_16b"
3 "48b_or_14b_or_16b"
4 "per_lane_or_16b"
5 "per_lane_or_14b_or_16b"
6 "per_lane_or_48b_or_16b"
7 "per_lane_or_48b_or_14b_or_16b"
-1 "no change"
}
array set ch_config_linkwidths {
1 1X
2 2X
3 1X/2X
4 3X
5 1X/3X
6 2X/3X
7 1X/2X/3X
8 4X
9 1X/4X
10 2X/4X
11 1X/2X/4X
12 3X/4X
13 1X/3X/4X
14 2X/3X/4X
15 1X/2X/3X/4X
0 "no change"
}
proc ch_get_array_entry { arrayname key } {
variable $arrayname
upvar #0 $arrayname myarray
if {![info exists myarray($key)]} {
return "Invalid Input: $key"
} else {
return $myarray($key)
}
}
proc ch_get_ip { ip } {
if { [string equal "$ip" "0.0.0.0"] == 0 } {
return $ip
} else {
return "not being set"
}
}
proc ch_get_syslog_facility { facility } {
if { [string equal "$facility" "-1"] == 0 } {
return $facility
} else {
return "not being set"
}
}
proc ch_get_syslog_port { port } {
if { [string equal "$port" "-1"] == 0 } {
return $port
} else {
return "not being set"
}
}
proc ch_get_tzoffset { offset } {
if { [string equal "$offset" "100"] == 0 } {
return $offset
} else {
return "not being set"
}
}
proc ch_get_dst { start end } {
if { [string equal "$start" "0 0 0"] == 0 } {
return "<$start>/<$end>"
} else {
return "not being set"
}
}
proc ch_get_setname { setname } {
if { [string equal "$setname" "y"] == 0 } {
return "not being set"
} else {
return "being set to match chassis Ethernet name"
}
}
test_suite "configure" "configure" "configure all chassis:
SYSLOG_SERVER: [ch_get_ip $env(SYSLOG_SERVER)]
SYSLOG_PORT: [ch_get_syslog_port $env(SYSLOG_PORT)]
SYSLOG_FACILITY: [ch_get_syslog_facility $env(SYSLOG_FACILITY)]
NTP_SERVER: [ch_get_ip $env(NTP_SERVER)]
TZ_OFFSET: [ch_get_tzoffset $env(TZ_OFFSET)]
DST START/END: [ch_get_dst $env(DST_START) $env(DST_END)]
LINKWIDTH: [ch_get_array_entry ch_config_linkwidths $env(LINKWIDTH_SETTING)]
NODEDESC: [ch_get_setname $env(SET_NAME)]
LINKCRCMODE: [ch_get_array_entry ch_config_link_crc $env(LINKCRCMODE)]
File: /usr/lib/opa/tools/chassis_configure.exp" suite_setup noop {
global chassis
# Global Initializations for Test Suite:
# --------------------------------------
# ADD ANY GLOBAL INITIALIZATION HERE, SUCH AS:
# set env(MY_ENV_VAR) value
# also validate the environment
# if the environment is bad call fail_suite "information" abort_now
# abort_now should be 0 if it is safe to proceed and simply ignore all
# test_case calls. it should be 1 if that is not possible.
# Procedures used to support Test Suite:
# --------------------------------------
# The actual test cases:
# ----------------------
parallel chassis $env(CFG_CHASSIS) {
set chassis [chassis_strip_slots "$chassis"]
local_sh
send_unix_cmd "grep $chassis $env(CFG_CFGTEMPDIR)/.chassisSetup.out | grep IP_Addr"
set out [expect_list 60 { ": [0-9.]+" } ]
regexp {([0-9.]+)} $out c chassisIP
local_sh_exit
test_case_chassis_configure $chassis $chassisIP
}
}