/* $XConsortium: SpinBox3.dat /main/5 1996/04/30 13:56:42 schuldy $ */
/*
* (c) Copyright 1989, 1990, 1991, 1992, 1993 OPEN SOFTWARE FOUNDATION, INC.
* ALL RIGHTS RESERVED
* Motif
*
* Copyright (c) 1987-2012, The Open Group. All rights reserved.
*
* These libraries and programs are free software; you can
* redistribute them and/or modify them under the terms of the GNU
* Lesser General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* These libraries and programs are distributed in the hope that
* they will be useful, but WITHOUT ANY WARRANTY; without even the
* implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU Lesser General Public License for more
* details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with these librararies and programs; if not, write
* to the Free Software Foundation, Inc., 51 Franklin Street, Fifth
* Floor, Boston, MA 02110-1301 USA
*/
/*
* HISTORY
*/
#) A SpinBox will appear on your screen. It will have 2 children of the
type specified on the command line, one of type NUMERIC, and the other of
type STRING. There will be a Separator between the 2 children.
#) Both arrows of the SpinBox should be sensitive.
#) The two arrows should be at the leftmost edge of the SpinBox,
and horizontally adjacent to each other.
#) The height of the arrows should be 25 pixels.
#) The visible item in the STRING child should be "February". The
visible item in the NUMERIC child should be 2.
#) Set the focus to the STRING child.
#) Press MB1 on the right-pointing arrow. Hold it down for a few seconds.
Release MB1. The value displayed in the STRING child should be incremented
by 1; i.e, "March" will now be the displayed value. The valueChangedCallback
should be invoked twice with the reasons XmCR_OK and XmCR_SPIN_NEXT. The
modifyVerifyCallback should be invoked with the reason XmCR_SPIN_NEXT.
C)
#) Set the focus to the NUMERIC child.
#) Click on the left-pointing arrow until the value displayed in the
NUMERIC child is 3. You should not be able to decrement the value any
further. The value should wrap to 15 after 3.
#) Click on the right-pointing arrow until the value displayed in the
NUMERIC widget is 15. You should not be able to go to increment the value
any further. The value should wrap to 3 after 15.
C)
#) Press MB1 on the right-pointing arrow. After about 10 seconds,
the value displayed in the NUMERIC child should be incremented by 3.
Do not release MB1. After about 10 seconds, the value displayed in the
NUMERIC child should again be incremented by 3.
The reason for the valueChangedCallback and the modifyVerifyCallback
should be XmCR_SPIN_NEXT.
Release MB1. The reason for the valueChangedCallback should be XmCR_OK.
C)
#) The two arrows of the SpinBox should be at the rightmost edge of the
SpinBox, and horizontally adjacent to each other.
#) The height of the arrows should now be 50 pixels.
#) The visible item in the STRING child should be "June". The
visible item in the NUMERIC child should be 0.7. (The number of
decimal places that the integer value is displayed with has been increased
to 1.)
#) Set the focus to the STRING child. The right-pointing arrow should be
insensitive, and the left-pointing arrow, sensitive.
#) Set the focus to the NUMERIC child. The right-pointing arrow should be
sensitive, and the left-pointing arrow, insensitive.
#) With the focus on the NUMERIC child, press MB1 on the right-pointing
arrow. Hold it down. After about 10 seconds, the value displayed in the
NUMERIC child should be incremented to 0.8.
Do not release MB1. After about 10 seconds, the value displayed in the
NUMERIC child should again be incremented to 0.9.
The reason for the valueChangedCallback and the
modifyVerifyCallback should be XmCR_SPIN_NEXT.
C)
#) The two arrows should now be at either end of the SpinBox.
#) Set the focus to the STRING child. The left arrow should be sensitive,
and the right, insensitive.
#) Set the focus to the NUMERIC child. The right arrow should be sensitive,
and the left, insensitive.
#) The value of the numeric child should be 0.1.
#) With the focus on the NUMERIC child, press MB1 on the right-pointing arrow,
and hold. The value displayed in the NUMERIC child should remain the same.
Release MB1. The value in the NUMERIC child should increment to 1.1 with
no perceptible delay.
C)
#) The two arrows should now be at the leftmost edge of the SpinBox,
and horizontally adjacent to each other.
#) Both arrows of the SpinBox should now be insensitive.
#) Set the focus in turn to the NUMERIC and STRING child. Both
arrows should continue to be insensitive.
C)
#) The two arrows should now be at the rightmost edge of the SpinBox,
and horizontally adjacent to each other.
#) Both arrows of the SpinBox should be insensitive.
C)
#) The two arrows should now be to the right of the text widgets, with an
upward pointing arrow displayed above a downward one.
#) Both arrows should be insensitive. (SpinBox3 TP 8: Motif/CDE
Convergence)
C)
#) The two arrows should be to the left of the text widgets, one above the
other.
#) The upward arrow will be insensitive, and the downward arrow will be
sensitive. (SpinBox 3 TP 9: Motif/CDE Convergence)
C)
#) The two arrows should be to the right of the text widgets, one above the
other.
#) The upward arrow will be sensitive, and the downward arrow will be
insensitive. (SpinBox 3 TP 10: Motif/CDE Convergence)
C)
#) The two arrows should appear to the left of the SpinBox text widgets, with
the downward arrow to the left of the upward arrow. (SpinBox 3 TP 11:
Motif/CDE Convergence)
C)
#) Set the focus on the STRING SpinBox. Its layout should appear unchanged.
#) The downward pointing arrow is sensitive, and the upward arrow is
insensitive. (SpinBox 3 TP 12: Motif/CDE Convergence)
C)
#) Set the focus on the NUMERIC SpinBox. Its layout should appear unchanged.
#) The downward pointing arrow is insensitive, and the upward arrow is
sensitive. (SpinBox 3 TP 13: Motif/CDE Convergence)
C)
#) The two arrows should appear to the right of the SpinBox text widgets, with
the downward arrow to the left of the upward arrow. (SpinBox 3 TP 14:
Motif/CDE Convergence)
C)
#) Set the focus on the STRING SpinBox. Its layout should appear unchanged.
#) The downward pointing arrow is sensitive, and the upward arrow is
insensitive. (SpinBox 3 TP 15: Motif/CDE Convergence)
C)
#) Set the focus on the NUMERIC SpinBox. Its layout should appear unchanged.
#) The downward pointing arrow is insensitive, and the upward arrow is
sensitive. (SpinBox 3 TP 16: Motif/CDE Convergence)
C)
#) The two arrows should appear to both sides of the SpinBox text widgets, with
the downward arrow to the left of the upward arrow. (SpinBox 3 TP 17:
Motif/CDE Convergence)
C)
#) Set the focus on the STRING SpinBox. Its layout should appear unchanged.
#) The downward pointing arrow is sensitive, and the upward arrow is
insensitive. (SpinBox 3 TP 18: Motif/CDE Convergence)
C)
#) Set the focus on the NUMERIC SpinBox. Its layout should appear unchanged.
#) The downward pointing arrow is insensitive, and the upward arrow is
sensitive. (SpinBox 3 TP 19: Motif/CDE Convergence)
C)
E)