XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.101.2.36 1999/12/28 12:13:34 hohndel Exp $
/******************************************************************************/
/*
 * This file is to provide a quick method for most people to change the
 * behaviour of their XFree86 installation without having to fully
 * understand the workings of site.def and all the various '.cf' files.
 *
 * These are the most common settings you would choose for compiling and
 * installing XFree86 on the systems supported by it.
 *
 * A good way to use this file is to copy it to host.def, and make the
 * changes there.  That way, future patches to this file won't fail.
 * The host.def file will never be patched.
 *
 * The distributed version of this file should contain no uncommented
 * definitions.  Such default definitions belong in xfree86.cf.
 */
/******************************************************************************/

/*
 * If you have build-specific modifications in your host.def file, but
 * want an empty host.def file installed when doing 'make install',
 * uncomment the following
 *
#define InstallEmptyHostDef
 */

/*
 * If using GCC 2.x on a system where it isn't the default, uncomment
 * the following
 *
#define HasGcc2		YES
#define HasGcc		YES
 */

/*
 * If using GCC 2.x with C++ on a system where it isn't the default, uncomment
 * the following.
 *
#define HasGcc2ForCplusplus	YES
 */

/*
 * The default optimisation flags for GCC 2.x.  -fno-strength-reduce is
 * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
 * If you are using a version that doesn't have this bug, you can
 * uncomment the following line, and remove '-fno-strength-reduce'
 * If you are building binaries for a 486, it may be beneficial to add
 * -m486
 *
#define DefaultGcc2i386Opt	-O2 -fno-strength-reduce
 */

/*
 * For Linux, this should match the Binutils version you have.  This example
 * is for 2.6.0.7.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxBinUtilsMajorVersion	26
 */

/*
 * For Linux, these should match the libc version you have.  This example
 * is for libc.5.4.x.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxCLibMajorVersion	5
#define LinuxClibMinorVersion	4
 */

/*
 * If you want to use the GNU malloc library, uncomment this
 *
#define UseGnuMalloc		YES
 */

/*
 * Set this to whatever is required to access the GNU malloc library.
 * The default is '-lgmalloc' unless is specified in the OS's .cf file.
 *
#define GnuMallocLibrary	-L/usr/local/lib -lgmalloc
 */

/*
 * To disable the internal Xserver malloc, set this to NO
 *
#define UseInternalMalloc	YES
 */

/*
 * Some Linux releases don't have a libtermcap.  In this case you may need
 * to uncomment the following
 *
#define TermcapLibrary		-lncurses
 */

/*
 * If you have Tk (which is required to build XF86Setup), uncomment this
 * Note: version 4.0 or 4.1 is required, and XF86Setup links it statically by
 * default.
 *
#define HasTk			YES
 */

/*
 * Set the paths and names for your Tk library if they don't match the
 * defaults (check your OS .cf file or Imake.tmpl for the defaults).
 *
 * Common values for TkLibName are tk4.0, tk4.1, etc.
 *
 * Some Linux releases need TkIncDir set to /usr/include/tcl, and some
 * need it set to /usr/X11R6/include.
 *
 * Some Linux releases need TkLibDir set to /usr/X11R6/lib
 *
#define TkLibDir		/usr/local/lib
#define TkIncDir		/usr/local/include
#define TkLibName		tk
 */

/*
 * By default, XF86Setup is linked with a static Tk library.  To change
 * that, uncomment the following line.
 *
#define XF86SetupUsesStaticTk	NO
 */

/*
 * If you have Tcl (which is required to build XF86Setup), uncomment this
 * Note: version 7.4 or 7.5 is required, and XF86Setup links it statically by
 * default.
 *
#define HasTcl			YES
 */

/*
 * Set the paths and names for your Tcl library if they don't match the
 * defaults (check your OS .cf file or Imake.tmpl for the defaults).
 *
 * Common values for TclLibName are tcl7.4, tcl7.5, etc.
 *
 * Some Linux releases need TclIncDir set to /usr/include/tcl.
 *
#define TclLibDir		/usr/local/lib
#define TclIncDir		/usr/local/include
#define TclLibName		tcl
 */

/*
 * By default, XF86Setup is linked with a static Tcl library.  To change
 * that, uncomment the following line.
 *
#define XF86SetupUsesStaticTcl	NO
 */

/*
 * Which servers do you wish to build, you can save a lot of disk space
 * by only compiling the server you will be using.  It will also save you
 * considerable compile time. The default is to build all servers supported
 * on your platform.
 *
 * The following servers are supported in Intel x86 platforms
 *
#define XF86SVGAServer          NO
#define XF86VGA16Server         NO
#define XF86VGA16DualServer	NO
#define XF86MonoServer          NO
#define XF86MonoDualServer	NO
#define XF86S3Server            NO
#define XF86S3VServer           NO
#define XF86I8514Server         NO
#define XF86Mach8Server         NO
#define XF86Mach32Server        NO
#define XF86Mach64Server        NO
#define XF86P9000Server		NO
#define XF86AGXServer		NO
#define XF86W32Server		NO
#define XF86I128Server		NO
#define XF86GLINTServer		NO
#define XF86FBDevServer		NO
 */

/*
 * Which servers do you wish to build, you can save a lot of disk space
 * by only compiling the server you will be using.  It will also save you
 * considerable compile time.
 *
 * The following servers are supported on Digital Alpha platforms:
 *
#define XF86SVGAServer          NO
#define XF86MonoServer          NO
#define XF86S3Server            NO
#define XF86S3VServer           NO
#define XF86P9000Server		NO
#define XF86TGAServer		NO
#define XF86GLINTServer		NO
#define XF86Mach64Server	NO
#define XF86I128Server		NO
 */

/*
 * Which servers do you wish to build, you can save a lot of disk space
 * by only compiling the server you will be using.  It will also save you
 * considerable compile time.
 *
 * The following server is supported on Mips/Arc platforms:
 *
#define XF86S3Server            NO
 */

/*
 * PC98 X servers
 *
 * Uncommenting the following automatically enables all PC98 servers
 *
#define BuildPC98Servers	YES
 */

/*
 * To enable/disable individual PC98 servers, use these
 *
#define XF98EGCServer		YES
#define XF98GANBWAPServer	YES
#define XF98NEC480Server	YES
#define XF98NKVNECServer	YES
#define XF98WABSServer		YES
#define XF98WABEPServer		YES
#define XF98WSNAServer		YES
#define XF98TGUIServer		YES
#define XF98MGAServer		YES
#define XF98SVGAServer		YES
#define XF98NECS3Server		YES
#define XF98PWSKBServer		YES
#define XF98PWLBServer		YES
#define XF98GA968Server		YES
 */

/*
 * The following server is supported on Motorola 68k platforms:
 *
#define XF68FBDevServer		NO
 */

/*
 * To disable building the Xnest server, uncomment this.
 *
#define XnestServer		NO
 */

/*
 * To disable building Xvfb, uncomment this.
 *
#define XVirtualFramebufferServer	NO
 */

/*
 * Set the default server (ie the one that gets the sym-link to "X")
 *
#define ServerToInstall		XF86_S3
 */


/*
 * Server configuration parameters.  The defaults are shown here:
 */

/*
 * SVGA server:
 *
#define XF86SvgaDrivers		nv et4000 et3000 pvga1 gvga r128 ati sis tvga8900 \
				cirrus ncr77c22 compaq mga oak al2101 ali \
				cl64xx video7 ark mx realtek apm s3_savage \
				s3v s3_svga neo chips cyrix rendition p9x00 \
				spc8110 i740 tdfx i810 smi generic
 */

/*
 * VGA16 server:
 *
#define XF86Vga16Drivers	et4000 et3000 ncr77c22 ati sis tvga8900 oak \
				cl64xx generic 
 */

/*
 * VGA2 driver in Mono server:
 *
#define XF86Vga2Drivers		et4000 et3000 pvga1 gvga ati sis tvga8900 \
				cirrus ncr77c22 oak cl64xx generic
 */

/*
 * Mono driver in Mono or VGA16 server:
 *
#define XF86MonoDrivers		hgc1280 sigma apollo hercules
 */

/*
 * ET4000/W32 server:
 *
#define XF86W32Drivers		et4000w32
 */

/*
 * BSD Console driver support (for FreeBSD and NetBSD).
 *
 * By default, support is included for pccons and pcvt for NetBSD, and
 * pccons, syscons and pcvt for FreeBSD.
 *
 * To change the list of supported drivers, set the following parameter.
 * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT,
 * -DCODRV_SUPPORT.  The following example includes support for syscons and
 * pcvt only.
 *
#define XFree86ConsoleDefines	-DSYSCONS_SUPPORT -DPCVT_SUPPORT
 */

/*
 * The X servers need to run as root on most OSs.  We're now using a
 * wrapper in that case, but we still need to make it known that the
 * servers need SetUID.  When only using xdm, this (and the wrapper)
 * are not required.  Disabling this automatically disables use of the
 * wrapper.
 *
 * If you're only starting the Xservers with xdm set this to NO
 *
#define XserverNeedsSetUID	NO
 */

/*
 * To disable building the font server, uncomment this.
 *
#define BuildFontServer		NO
 */

/*
 * Do you want to Build Fonts (Usually you only want to build and install
 * fonts once, if this is a first time install you will want to build the
 * fonts)
 *
#define BuildFonts		NO
 */

/*
 * To not build/install the 75dpi fonts, uncomment the following
 *
#define Build75DpiFonts		NO
 */

/*
 * To not build/install the 100dpi fonts, uncomment the following
 *
#define Build100DpiFonts	NO
 */

/*
 * To not build/install the Speedo fonts, uncomment the following
 *
#define BuildSpeedoFonts	NO
 */

/*
 * To not build/install the Type1 fonts, uncomment the following
 *
#define BuildType1Fonts		NO
 */

/*
 * To not build/install the Cyrillic fonts, uncomment the following
 *
#define BuildCyrillicFonts	NO
 */

/*
 * To not install the local font directory, uncomment the following
 *
#define MakeLocalFontDir	NO
 */

/*
 * To build only the servers with a cut-down source tree, uncomment
 * this.
 *
#define BuildServersOnly	YES
 */

/*
 * To disable building XInput support, uncomment this
 *
#define BuildXInputExt		NO
 */

/*
 * Select the XInput devices you want by setting them to YES.       
 *
 * Note: Joystick support is only included for Linux and FreeBSD at the
 * moment.  For Linux it requires the Joystick module to be installed (it
 * isn't part of the standard kernel distribution).  For FreeBSD, a kernel
 * will need to be built with the Joystick driver in order to be able to
 * use this.
 *
#define JoystickSupport		NO
#define WacomSupport		YES
#define MicroTouchSupport	YES 
#define ElographicsSupport	YES 
#define DynaproSupport		YES 
#define SummaSketchSupport	YES
#define AceCadSupport		YES
#define DialBoxSupport		YES
#define CalcompSupport		YES
 */

/*
 * if your system supports dynamic loading of modules using
 * dlopen set this to YES.
 *
#define BuildDynamicLoading	YES
 */

/*
 * To disable the ScreenSaver Extension, uncomment this line.
 *
#define BuildScreenSaverExt	NO
 */

/*
 * If you don't want to build PEX, uncomment this.
 *
#define BuildPexExt		NO
 */

/*
 * If you don't want to build XIE, uncomment this.
 *
#define BuildXIE		NO
 */

/*
 * If you don't want to build support for an external GLX server module or
 * library, uncomment this.
 *
 * NOTE: XFree86 3.3 does not include GLX server source, module, or
 *       functional libraries. Building in support does not require
 *       availability of a GLX package, but will allow it to be used
 *       when released (by dynamic load or relinking).  
 *
#define BuildGlxExt             NO
 */

/*
 * If you aren't building with support for loadable modules and wish
 * to statically link external GLX server libs instead of the default
 * non-functional stub library, uncomment the following define and
 * specify the space-seperated pathnames of those libraries here.
 *
#define GlxStaticServerLib	/full/path/name/to/glx/servGL/libServerGlx.a \
				/full/path/name/to/glx/servGL/libMesaGlx.a
 */ 

/*
 * If you want to build only the DIS (Document Imaging Subset of XIE)
 * uncomment this line.  This option is only relevant when XIE is built.
 *
#define BuildDIS		YES
 */

/*
 * By default, the sample config files for xinit, xdm and xfs are installed
 * only when there is no pre-existing version installed.  Uncommenting the
 * following lines will force the sample versions to be installed even if
 * it means over-writing existing versions.
 *
#define InstallXinitConfig	YES
#define InstallXdmConfig	YES
#define InstallFSConfig		YES
 */

/*
 * By default the application defaults files are always installed.
 * Uncommenting the the following will prevent exising application
 * defaults files from being over-written.
 *
#define InstallAppDefFiles	NO
 */

/*
 * If you are running Solaris x86, and want to disable building support
 * for the aperture driver, uncomment this.
 *
#define HasSolx86ApertureDriver	NO
 */

/*
 * If you are running NetBSD 0.9C or later, or OpenBSD and want to disable
 * building support for the NetBSD aperture driver, uncomment this.
 *
#define HasNetBSDApertureDriver NO
 */

/*
 * If you are running SVR3 and have the mmap driver installed (for linear
 * framebuffer access) uncomment this.
 *
#define HasSVR3mmapDrv	YES
 */

/*
 * If you are using an SVR3 (like ISC 4.x) which supports long file names,
 * you can * uncomment this to have manual pages installed under their
 * full names
 *
#define ExpandManNames		YES
 */

/*
 * For a POSIXized build on Interactive uncomment this
 * Could be used with gcc 'till Version 2.6.3
 * Should be used with gcc 2.7.2. 
 *
#define UsePosix		YES
 */

/*
 * If you want XDMAUTH support (if you have Wraphelp.c), uncomment this.
 *
#define HasXdmAuth		YES
 */

/*
 * If you have Linux DECnet support, and want to build XFree86 with support
 * for connections over DECnet, uncomment this.
 *
#define HasDECnet		YES
 */

/*
 * To forceably build static libraries in addition to shared libraries,
 * uncomment this.
 *
#define ForceNormalLib		YES
 */

/*
 * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
 * not the Linux ELF versions.
 *
#define LinuxElfDefault		NO
 */

/*
 * To use ELF format shared libraries for supported OSs, uncomment this.
 *
 * For Linux the default setting of this is the same as the setting of
 * LinuxElfDefault.
 *
 * For FreeBSD this should automatically be set correctly by imake.  Only
 * change it here if you need to override the automatic setting.
 *
#define UseElfFormat		YES
 */

/*
 * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
 * a.out compatibility libraries.  To enable that, uncomment this.
 *
#define BuildAoutLibraries	YES
 */

/*
 * If you have trouble with make bombing out in Xlib, try uncommenting this.
 * You will not get dependencies as a result, but better than nothing.
 *
#define MakeHashTableBug        YES
 */

/*
 * If you do not want your man pages compress under SVR3 systems that
 * support it, uncomment this.
 *
#define CompressManPages        NO
 */

/*
 * LinuxDoc stuff.  Uncomment those of these you want.  Check in
 * lnxdoc.tmpl for other things you might need to define/change here.
 *
#define HasLinuxDoc		YES
#define HasLatex		YES
#define HasDvips		YES
#define BuildLinuxDocHtml	YES
#define BuildAllDocs		YES
 */

/*
 * To install Japanese versions of the documentation uncomment this.
 *
#define InstallJapaneseDocs	YES
 */

/*
 * By default, XF86Contrib is defined so build only those parts of
 * of the contrib distribution supported by XFree86.  To prevent this
 * from being defined, uncomment the following.
 *
#define DontDefineXF86Contrib
 */

/*
 * By default, gccmakedep uses mktemp for security reasons.
 * Uncomment this, if your system lacks mktemp.
 *
#define HasMktemp		NO
 */