# Contributed by John Smith.
# lm_sensors configuration file for the MSI GF615M-P33 rev 1.3 (MS-7597)
# 2011-07-14, Kid from Belgrade
# tweaked from config for MSI P35 Neo / MSI MS-7360 motherboard
# 2007-09-21, Andre Jagusch
# Comments welcome!
chip "f71889ed-*"
# Temperature
label temp1 "CPU"
label temp2 "System"
ignore temp3
# Fans
label fan1 "CPU"
label fan2 "System"
label fan3 "Misc"
# sensors in2, in3, in6, in7 and in8 may be ignored since
# they are not shown in BIOS for MS-7597
# in6 is always 0.00
# Voltage
label in0 "+3.3V"
label in1 "Vcore"
# ignore in2
# ignore in3
label in2 "Vdimm"
label in3 "Vchip"
label in4 "+5V"
label in5 "+12V"
ignore in6
# ignore in7
# ignore in8
label in7 "3VSB"
label in8 "Battery"
# never change the in0, in7 and in8 compute, these are hardwired in the chip!
# +5V, +12V and +3.3V computes looking fine for MS-7597, nothing changed
compute in0 (@ * 2), (@ / 2)
compute in2 (@ * 2), (@ / 2)
compute in3 (@ * 2), (@ / 2)
compute in4 (@ * 5.25), (@ / 5.25)
compute in5 (@ * 11), (@ / 11)
compute in6 (@ * 6.585), (@ / 6.585)
compute in7 (@ * 2), (@ / 2)
compute in8 (@ * 2), (@ / 2)
# On Fintek, first sensor is below or near the CPU socket (how to determine this?)
# CPU temperature is also measurable by on-die sensor on K10 series.
# Now I have not found this anywhere and correction is correlated with Fintek,
# tweaked for Athlon II x2 250, may differ for others.
chip "k10temp-*"
label temp1 "CPU K10 Temp"
compute temp1 (@ + 5.5), (@ - 5.5)