# Configuration files contributed by Ian Pilcher.
# The first one is for old BIOS versions:
################################################################################
#
#
# lm_sensors configuration for Intel DQ67SW
#
# NOTES:
#
# BIOS = SWQ6710H.86A.0050.2011.0401.1409 (01-Apr-2011)
#
# IDU = Intel Desktop Utilities version 3.1.3.030
# (Windows 7 Professional SP1, 64-bit)
#
# The minimum, maximum, and hysteresis values are generally the
# more conservative of the IDU- or BIOS-provided values.
#
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
#
# Minimum fan RPMs should be adjusted to reflect the behavior of
# the installed fans.
#
# "Memory DIMM Temperature" is presumably measured by a diode
# somewhere in the vicinity of the DIMM slots; "System Temperature
# might be a better name.
#
# 80 degrees Celcius might be a bit high for the "Memory DIMM
# Temperature" limit.
#
#
################################################################################
chip "nct6775-*"
ignore cpu0_vid
########################################################################
#
# Voltages
#
########################################################################
#
# Processor Vcc
#
label in0 "VCORE"
set in0_min 0.2 # from IDU (BIOS = 0.00)
set in0_max 1.6 # from IDU (BIOS = 1.74)
#
# +12 Volts
#
label in1 "+12V"
compute in1 16*@, @/16
set in1_min 10.8 # from IDU (BIOS does not set)
set in1_max 13.2 # from IDU (BIOS does not set)
#
# AVCC(?) - Not shown in BIOS or IDU
#
label in2 "AVCC"
set in2_min 3.1 # same as +3.3V (BIOS = 2.98)
set in2_max 3.5 # same as +3.3V (BIOS = 3.63)
#
# +3.3 Volts
#
label in3 "+3.3V"
set in3_min 3.1 # from IDU (BIOS = 2.98)
set in3_max 3.5 # from IDU (BIOS = 3.63)
#
# +5 Volts
#
label in4 "+5V"
compute in4 4*@, @/4
set in4_min 4.7 # from IDU (BIOS does not set)
set in4_max 5.3 # from IDU (BIOS does not set)
#
# SDRAM Vcc
#
label in5 "+1.5V"
set in5_min 1.4 # from IDU (BIOS does not set)
set in5_max 1.6 # from IDU (BIOS does not set)
#
# PCH Vcc
#
label in6 "PCH"
set in6_min 0.6 # from IDU (BIOS does not set)
set in6_max 1.6 # from IDU (BIOS does not set)
#
# +3.3 Volt Standby
#
label in7 "VSB"
set in7_min 3.0 # from IDU (BIOS = 2.98)
set in7_max 3.6 # from IDU (BIOS = 3.63)
#
# VBAT(?) - Not shown in BIOS or IDU
#
label in8 "VBAT"
#set in8_min 2.7 # from BIOS
#set in8_max 3.3 # from BIOS
########################################################################
#
# Fans
#
########################################################################
ignore fan4
#
# Chassis Inlet Fan
#
label fan1 "FRONT"
set fan1_min 250 # from IDU (BIOS does not set)
#
# Processor Fan
#
label fan2 "CPU"
set fan2_min 250 # from IDU (BIOS does not set)
#
# Chassis Outlet Fan
#
label fan3 "REAR"
set fan3_min 250 # from IDU (BIOS does not set)
########################################################################
#
# Temperatures
#
########################################################################
ignore temp8
#
# Memory DIMM Temperature
#
label temp1 "DIMM"
set temp1_max 80 # same as VR (IDU = 90)
set temp1_max_hyst 75 # same as VR
#
# VR Temperature
#
label temp2 "VR"
set temp2_max 80 # from BIOS (IDU = 90)
set temp2_max_hyst 75 # from BIOS
#
# Processor Temperature
#
label temp3 "CPU"
set temp3_max 80 # from BIOS (IDU = 87)
set temp3_max_hyst 75 # from BIOS
#
# PCH Temperature
#
label temp4 "PCH"
And the second one is for new BIOS versions:
################################################################################
#
#
# lm_sensors configuration for Intel DQ67SW (with newer BIOS)
#
# NOTES:
#
# Temperature input mappings were changed by a BIOS update
# between SWQ6710H.86A.0050.2011.0401.1409 (01-Apr-2011) and
# SWQ6710H.86A.0065.2012.0917.1519 (17-Sep-2012).
#
# Minimum and maximum values are the defaults from BIOS version
# SWQ6710H.86A.0065.2012.0917.1519 (17-Sep-2012).
#
# Intel Desktop Utilities 3.2.3.052 appears to get its default
# values from the BIOS.
#
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
#
# Minimum fan RPMs should be adjusted to reflect the behavior of
# the installed fans.
#
# "Memory DIMM Temperature" is presumably measured by a diode
# somewhere in the vicinity of the DIMM slots; "System Temperature
# might be a better name. If this is correct, 90 degrees seems
# like an extremely high threshhold for this reading.
#
# All hysteresis values are set to 75 degrees, which seems to be
# the default for the chip/driver.
#
#
################################################################################
chip "nct6775-*"
ignore cpu0_vid
########################################################################
#
# Voltages
#
########################################################################
#
# Processor Vcc
#
label in0 "VCORE"
set in0_min 0.2
set in0_max 1.6
#
# +12 Volts
#
label in1 "+12V"
compute in1 16*@, @/16
set in1_min 10.8
set in1_max 13.2
#
# AVCC(?) - Not shown in BIOS or IDU; min/max taken from +3.3V
#
label in2 "AVCC"
set in2_min 3.1
set in2_max 3.5
#
# +3.3 Volts
#
label in3 "+3.3V"
set in3_min 3.1
set in3_max 3.5
#
# +5 Volts
#
label in4 "+5V"
compute in4 4*@, @/4
set in4_min 4.7
set in4_max 5.3
#
# Memory Vcc
#
label in5 "+1.5V"
set in5_min 1.4
set in5_max 1.6
#
# PCH Vcc
#
label in6 "PCH"
set in6_min 0.6
set in6_max 1.6
#
# +3.3 Volt Standby
#
label in7 "VSB"
set in7_min 3.0
set in7_max 3.6
#
# VBAT(?) - Not shown in BIOS or IDU; min/max taken from old BIOS
#
label in8 "VBAT"
#set in8_min 2.7
#set in8_max 3.3
########################################################################
#
# Fans
#
########################################################################
ignore fan4
#
# Chassis Inlet Fan
#
label fan1 "FRONT"
set fan1_min 250 # from IDU (BIOS does not set)
#
# Processor Fan
#
label fan2 "CPU"
set fan2_min 250 # from IDU (BIOS does not set)
#
# Chassis Outlet Fan
#
label fan3 "REAR"
set fan3_min 250 # from IDU (BIOS does not set)
########################################################################
#
# Temperatures
#
########################################################################
ignore temp3
ignore temp8
#
# Memory DIMM Temperature
#
label temp1 "DIMM"
set temp1_max 90
set temp1_max_hyst 75
#
# VR Temperature
#
label temp2 "VR"
set temp2_max 90
set temp2_max_hyst 75
#
# Processor Temperature
#
label temp6 "CPU"
set temp6_max 99
set temp6_max_hyst 75
#
# PCH Temperature
#
label temp7 "PCH"
set temp7_max 114
set temp7_max_hyst 75