# Configuration file contributed by Eric Le Bras.
# Configuration file for Intel D201GLY2 motherboard
# Hardware monitor subsystem controlled by Winbond W83627DHG-B I/O controller.
# Created using information from BIOS and board documentation.
chip "w83627dhg-*"
label in1 "+12V"
label in4 "+5V"
label in6 "+1.5V"
# in5 is obviously unconnected, so ignore it
ignore in5
compute in1 @*(55/8), @/(55/8)
compute in4 @*(1+18/10), @/(1+18/10)
set in1_min 12.0 * 0.95
set in1_max 12.0 * 1.05
set in4_min 5.0 * 0.95
set in4_max 5.0 * 1.05
set in6_min 1.5 * 0.90
set in6_max 1.5 * 1.10
label fan1 "Chassis fan"
label fan2 "CPU fan"
# By default the D201GLY2 has a passive heatsink. If the optional active
# heatsink is present, then one of the following lines is to be commented out
# (very likely fan2, though not tried).
ignore fan2
ignore fan3
ignore fan4
label temp1 "Sys temp"
label temp2 "CPU temp"
ignore temp3
set temp1_max 50
set temp1_max_hyst 48
ignore cpu0_vid
ignore intrusion0