# lm_sensors configuration file for DFI Itox EL620-C industrial motherboard
# 2012-06-20, Paul Crawford <psc@sat.dundee.ac.uk>
# Based on feedback from DFI and the schematic sheet 15 of 24, revision A1, 28 October 2011

# Winbond W83627DHG configuration for EL620-C
chip "w83627dhg-*"

    label in0 "VCore"
    label in1 "+5V"
    label in2 "AVCC"
    label in3 "+3.3V"
    label in4 "+1.1V"
    label in5 "Vmemory"
    label in6 "+12V"
    label in7 "Vstandby"
    label in8 "VBAT"
    
# +12V and +5V use dividers from schematic
    compute in1 @*(1+(30.1/10)),  @/(1+(30.1/10))
    compute in6 @*(1+(60.4/10)),  @/(1+(60.4/10))

# We need to set voltage limits.
    set in0_min   0.80
    set in0_max   1.55

    set in1_min   5.0*0.95
    set in1_max   5.0*1.05

    set in2_min   3.3*0.95
    set in2_max   3.3*1.05

    set in3_min   3.3*0.95
    set in3_max   3.3*1.05

    set in4_min   1.1*0.95
    set in4_max   1.1*1.05

# DDR3 voltage range
    set in5_min   1.30
    set in5_max   1.58

# Original ATX spec was +/-10% on +12V, but recent ATX12V version 2.2 spec is 5% (still 10% on unmonitored -12V)
    set in6_min   12.0*0.95
    set in6_max   12.0*1.05

    set in7_min   3.3*0.95
    set in7_max   3.3*1.05

# Battery voltage, assume CR2032 Lithium-Manganese Dioxide Battery.
# This actually seems not to be needed as hard-coded?
    set in8_min   2.7
    set in8_max   3.3

# Fans
   label fan1		"System Fan"
   label fan2		"CPU Fan"
   label fan3		"2nd Fan"
   ignore fan4
   ignore fan5
   
# Fan minimums, disable fan1 & fan3 as a case fan is not always connected
  set fan1_min    0
  set fan2_min    500
  set fan3_min    0  

# Temperatures. Can we assume temp2 limit for CPU is set by BIOS?

   label temp1     "System Temp"
   label temp2     "CPU Temp"
   label temp3     "NB Temp"

   set temp1_max       65
   set temp1_max_hyst  55

   set temp3_max       65
   set temp3_max_hyst  55

# Not sure what this is, always reported 0.000 and the VID0-VID7 pins are not connected on schematic.
   ignore cpu0_vid
	
# From the Intel CPU itself? Seems not to need any special configuration.
#chip "coretemp-*"