# lm_sensors configuration file for the CFX3200-M2/G infinity motherboard
# 2007-07-06, George Multescu
chip "it8716-*"
# Voltages
label in0 "VCore" #-->cpu voltage
label in1 "VDDR"
label in2 "+3.3V" # VCC3
label in3 "+5V" # VCC
label in4 "V_NBr" #--> notrh bridge voltage
label in5 "+12V"
ignore in6
label in7 "5VSB" # VCCH
label in8 "VBat"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in5 ((30/10)+1.02)*@ , @/((30/10)+1.02) #-->not sure about this one, check this value(+12v) against bios
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# If vid (nominal CPU voltage) isn't correct, hardcode the correct value
# instead.
# set in0_min vid * 0.95
# set in0_max vid * 1.05
# set in1_min 1.8 * 0.95
# set in1_max 1.8 * 1.05
# set in2_min 3.3 * 0.95
# set in2_max 3.3 * 1.05
# set in3_min 5 * 0.95
# set in3_max 5 * 1.05
set in4_min 1.18 * 0.95
set in4_max 1.18 * 1.05
set in5_max 12 * 1.05
set in5_min 12 * 0.95
# set in6_max -5 * 0.95
# set in6_min -5 * 1.05
# set in7_min 5 * 0.95
# set in7_max 5 * 1.05
# The chip does not support in8 min/max
# Temperatures
label temp1 "System Temp"
label temp2 "CPU Temp"
label temp3 "ChipsetTemp"
# set temp1_over 60
# set temp1_low 10
# set temp2_over 50
# set temp2_low 10
# Fans
label fan1 "Chipset Fan"
label fan2 "CPU Fan"
label fan3 "System fan"
# set fan1_min 2000
# set fan2_min 2000