# Contributed by Matt Roberds.
# Second cut at a minimal sensors3.conf for Asus M2N-SLI Deluxe motherboard
# Based on existing entries in sensors3.conf and Jean Delvare's configuration
# for the Asus M2N32-SLI
# Matt Roberds, 21 Feb 2008
chip "it8716-*"
# Voltages
label in0 "VCore"
label in1 "VDDR" # Not in BIOS
ignore in2 # 3.3 V is monitored by adt7475
label in3 "+5V" # VCC
label in4 "+12V"
ignore in5 # -12 V not monitored
ignore in6 # -5 V not monitored
label in7 "5VSB" # Not in BIOS
label in8 "VBat" # Not in BIOS
# Vcore, VDDR, and Vbat are connected directly, so no compute
# line is needed for these. For +5V, +12V and 5VSB, the default
# resistors seem to have been used.
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in4 ((30/10)+1)*@ , @/((30/10)+1)
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# Temperatures
# Not sure. temp1 always reads close to what k8temp reports for Core0,
# and to what the BIOS reports as the CPU temperature. temp2 is between
# temp1 and temp3; it is close to what the BIOS reports as the motherboard
# temperature. temp3 always reads approximate ambient temperature.
label temp1 "CPU Temp"
label temp2 "MB Temp"
label temp3 "MB Temp"
# Fans
label fan1 "CPU Fan"
label fan2 "Chassis Fan 1"
label fan3 "Power Supply Fan"
# Ignore fans you don't have
# ignore fan2
# ignore fan3
chip "adt7475-*"
# Note: this section depends on some further hacks I have made to
# Jordan Crouse's driver
# Voltages
ignore in1
label in2 "+3.3V"
# Temperatures
# temp1 and temp3 don't appear to be hooked up; temp2 is on board the
# adt7475 chip itself.
ignore temp1
label temp2 "ADT7475 Temp"
ignore temp3
# Fans
label fan1 "Chassis Fan 4"
label fan2 "Chassis Fan 2"
label fan3 "Chassis Fan 3"
ignore fan4
# Ignore fans you don't have
# ignore fan1
# ignore fan2
# ignore fan3
chip "k8temp-*"
label temp1 "core0 temp"
label temp3 "core1 temp"