# lm_sensors configuration file for the ASRock M2NF3-VSTA motherboard
# 2008-01-01, Hans de Goede <j.w.r.degoede@hhs.nl>
# Comments welcome!
# Winbond W83627EHF configuration for ASRock AM2NF3-VSTA
chip "w83627ehf-*" "w83627dhg-*"
label in0 "VCore"
label in1 "VCore2"
label in2 "AVCC"
label in3 "3VCC"
label in6 "12V"
label in7 "VSB"
label in8 "VBAT"
label in9 "5V"
# +12V and +5V use dividers recommended by datasheet
compute in6 @*(1+(56/10)), @/(1+(56/10))
compute in9 @*(1+(22/10)), @/(1+(22/10))
# in4 and in5 are not used (they seem to be hooked up to 3.3v/2, but thats
# already monitored)
ignore in4
ignore in5
# we need to set all voltage limits (hurray for a well written BIOS)
# Note you may need to adapt in0 and in1 depending on your CPU
set in0_min 0.9
set in0_max 1.5
set in1_min 0.9
set in1_max 1.5
set in2_min 3.3*0.95
set in2_max 3.3*1.05
set in3_min 3.3*0.95
set in3_max 3.3*1.05
set in6_min 12.0*0.9
set in6_max 12.0*1.1
set in7_min 3.3*0.95
set in7_max 3.3*1.05
set in8_min 3.0
set in8_max 3.3*1.05
set in9_min 5.0*0.95
set in9_max 5.0*1.05
# Fans
label fan1 "Case Fan"
label fan2 "CPU Fan"
ignore fan3
ignore fan5
# Fan minumums, disable fan1 min as a case fan isn't always connected,
set fan1_min 0
# set fan2_min 1700
# Temperatures
label temp1 "Sys Temp"
label temp2 "CPU Temp"
label temp3 "CPU2 Temp"
set temp1_max 45
set temp1_max_hyst 40
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp2 "Core0 Temp"
label temp3 "Core1 Temp"
label temp4 "Core1 Temp"