### Sensors configuration for ASRock G41C-GS motherboard
### 2014-02-19, ianp <snailbox88-dev -at- yahoo -dot- com>
### Thanks to Jean Delvare and Guenter Roeck
### Comments are welcome.
chip "w83627dhg-*"
### Voltages
ignore in1 # Ignored until
ignore in4 # properly identified
label in5 "+5V"
label in6 "+12V"
ignore cpu0_vid # Always at 0 in my case, so ignore it
### Scale +5V and +12V.
compute in5 @*3, @/3
compute in6 @*(1+56/10), @/(1+56/10)
### Set in0 according to CPU nominal voltage.
set in0_min 0.8500
set in0_max 1.3625
set in5_min 5 * 0.95
set in5_max 5 * 1.05
set in6_min 12 * 0.95
set in6_max 12 * 1.05
### Temperatures
# temp3 is not identified
label temp1 "N/B Temp"
label temp2 "CPU Temp"
### Set according to CPU and preference.
set temp1_max 60
set temp1_max_hyst 55
set temp2_max 60
set temp2_max_hyst 55
### Fans
### Ignore fan4 and fan5. There are
### only 3 fan connectors on this board.
label fan1 "POW Fan"
label fan2 "CPU Fan"
label fan3 "CHA Fan"
ignore fan4
ignore fan5
### Set according to preference.
set fan1_min 0
set fan2_min 900
set fan3_min 0