Blob Blame History Raw
SCSI-MIB DEFINITIONS ::= BEGIN

   IMPORTS
   MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
   NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32,
   Counter64, Gauge32,
   mib-2                                     FROM SNMPv2-SMI
   TEXTUAL-CONVENTION, TimeStamp, TruthValue,
   RowStatus, RowPointer, AutonomousType,
   StorageType                               FROM SNMPv2-TC
   MODULE-COMPLIANCE, OBJECT-GROUP,
   NOTIFICATION-GROUP                        FROM SNMPv2-CONF
   SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB;

scsiMIB MODULE-IDENTITY
     LAST-UPDATED "200603300000Z"        -- 30th March 2006
     ORGANIZATION "IETF"
     CONTACT-INFO "
          Michele Hallak-Stamler



          Sanrad Intelligent Network
          27 Habarzel Street
          Tel Aviv, Israel
          Phone: +972 3 7674809
          E-mail: michele@sanrad.com

          Yaron Lederman
          Siliquent Technologies Ltd.
          21 Etzel Street
          Ramat Gan, Israel
          Phone: +972 54 5308833
          E-mail: yaronled@bezeqint.net

          Mark Bakke
          Postal: Cisco Systems, Inc
          7900 International Drive, Suite 400
          Bloomington, MN
          USA 55425
          E-mail: mbakke@cisco.com

          Marjorie Krueger
          Postal: Hewlett-Packard
          8000 Foothills Blvd.
          Roseville, CA 95747
          E-mail: marjorie_krueger@hp.com

          Keith McCloghrie
          Cisco Systems, Inc.
          Postal: 170 West Tasman Drive
          San Jose, CA USA 95134
          Phone: +1 408 526-5260
          E-mail: kzm@cisco.com

         "
     DESCRIPTION
          "The SCSI MIB Module.
          Copyright (C) The Internet Society (2006).  This version of
          this MIB module is part of RFC 4455; see the RFC
          itself for full legal notices."

   -- Revision History

     REVISION     "200603300000Z"
     DESCRIPTION  " Initial version published as RFC 4455."
::= { mib-2 139}

--****************** Textual Conventions **************************
ScsiLUN  ::= TEXTUAL-CONVENTION



     STATUS current
     DESCRIPTION
        "This textual convention represents a SCSI Logical Unit
        Number (LUN).  The format of a LUN is documented in Tables
        A.2 and A.3 of SAM-2 [SAM2]."
     REFERENCE
      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
     SYNTAX OCTET STRING (SIZE ( 2 | 8))

ScsiIndexValue ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
        "An arbitrary integer value, greater than zero, for use
        as a unique index value."
     SYNTAX Unsigned32 (1..4294967295)

ScsiPortIndexValueOrZero ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
      "This textual convention is an extension of the ScsiIndexValue
       convention.  The latter defines a greater than zero value used
       to identify an index.  This extension permits the additional
       value of zero and is applicable only to indices of SCSI port.
       Usage of the zero is object-specific and must therefore be
       defined as part of the description of any object that uses
       this syntax.  Examples of the usage of zero might include
       situations where the index was unknown, or when none or all
       indices need to be referenced."
     SYNTAX Unsigned32 (0..4294967295)

ScsiIndexValueOrZero ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
      "This textual convention is an extension of the ScsiIndexValue
       convention.  The latter defines a greater than zero value used
       to identify an index.  This extension permits the additional
       value of zero.  Usage of the zero is object-specific and must
       therefore be defined as part of the description of any object
       that uses this syntax.  Examples of the usage of zero might
       include situations where index was unknown, or when none or
       all indices need to be referenced."
     SYNTAX Unsigned32 (0..4294967295)

ScsiIdentifier ::= TEXTUAL-CONVENTION



     STATUS current
     DESCRIPTION
       "This textual convention represents a generic SCSI port
       identifier.
       The format depends on the transport used and is documented
       in Tables A.2 and A.3 of SAM-2 [SAM2]."
     REFERENCE
      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
     SYNTAX OCTET STRING (SIZE (0..262))

ScsiName ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
       "This textual convention represents the name of a SCSI
       initiator device, a SCSI target device, a SCSI initiator port
       or a SCSI target port.
       The format depends on the transport used and is documented
       in Tables A.4 and A.5 of SAM-2 [SAM2].
      Every object defined using this syntax must define whether it
      is
      a) always used for a port,
      b) always used for a device, or
      c) the circumstances under which it is used for a port or
      device."
     REFERENCE
      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
     SYNTAX OCTET STRING (SIZE (0..262))

ScsiLuNameOrZero  ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
       "This textual convention represents either the name of a SCSI
       logical unit or a zero-length string.  Objects defined with
       this syntax must specify the meaning of the zero-length
       string.
       The format of the name of a LU is defined as:
       - a zero-length octet string or
       - a string of eight bytes."
     REFERENCE
      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
      T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]"
     SYNTAX OCTET STRING (SIZE (0 | 8))



ScsiDeviceOrPort ::= TEXTUAL-CONVENTION



     STATUS current
     DESCRIPTION
       "This type specifies whether a particular configuration is
       applicable to a port or to a device."
     SYNTAX INTEGER  {
         device(1),
         port(2),
         other(3)
      }

ScsiIdCodeSet ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
       "This textual convention specifies the code set for the
       identifier contained in an Identification Descriptor returned
       in a logical unit's Device Identification Page, and is
       formatted as defined in T10 SPC-2 (see REFERENCE) Table 172 -
       Code Set"
     REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
     SYNTAX Unsigned32 (0..15)

ScsiIdAssociation ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
       "This textual convention specifies what the identifier is
       associated with (e.g., with the addressed physical/logical
       device or with a particular port) for the identifier
       contained in an Identification Descriptor returned in a
       logical unit's Device Identification Page, and is
       formatted as defined in T10 SPC-2 (see REFERENCE)
       Table 173 - Association."
     REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
     SYNTAX Unsigned32 (0..3)

ScsiIdType ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
      "This textual convention specifies the type for the identifier
       contained in an Identification Descriptor returned in a



       logical unit's Device Identification Page, and is formatted
       as defined in T10 SPC-2 (see REFERENCE) table 174 - Identifier
       Type."
     REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
     SYNTAX Unsigned32 (0..15)

ScsiIdValue ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
      "This textual convention represents an identifier.  The objects
       of type ScsiIdCodeSet, ScsiIdAssociation, ScsiIdType define
       together the format.
       The format is the same as contained in an Identification
       Descriptor returned in a logical unit's Device Identification
       Page, and is formatted as defined in T10 SPC-2
       (see REFERENCE)."
    REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
     SYNTAX OCTET STRING (SIZE (0..255))

ScsiHrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS current
     DESCRIPTION
       "The index value for a software module's row in the Host
       Resources MIBs hrSWInstalledTable.  A zero value indicates
       that no row in the hrSWInstalledTable is applicable."
     REFERENCE
       "hrSWInstalledTable is defined in the Host Resources MIB,
       [RFC2790]."
     SYNTAX   Integer32 (0..2147483647)


--****************** Structure of the MIB **************************
scsiNotifications OBJECT IDENTIFIER ::= { scsiMIB 0 }
scsiAdmin         OBJECT IDENTIFIER ::= { scsiMIB 1 }
scsiObjects       OBJECT IDENTIFIER ::= { scsiMIB 2 }
scsiConformance   OBJECT IDENTIFIER ::= { scsiMIB 3 }

scsiTransportTypes   OBJECT IDENTIFIER ::= { scsiAdmin 1 }
scsiGeneral          OBJECT IDENTIFIER ::= { scsiObjects 1 }
scsiInitiatorDevice  OBJECT IDENTIFIER ::= { scsiObjects 2 }
scsiTargetDevice     OBJECT IDENTIFIER ::= { scsiObjects 3 }



scsiLogicalUnit      OBJECT IDENTIFIER ::= { scsiObjects 4 }

--****************** Transport Types *******************************
-- The following object identifiers allow determining the different
-- transports (service delivery subsystems) in use under the SCSI
-- layer.

scsiTransportOther   OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION
     "This identity identifies a transport that has no identity; it
     might happen because the transport is unknown or might not
     have been defined when this MIB module was created."
::= { scsiTransportTypes 1 }

scsiTransportSPI     OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION
     "This identity identifies a parallel SCSI transport."
   REFERENCE
     "T10 - SCSI Parallel Interface - 4 (SPI-4)
     - ANSI INCITS 362-2002 [SPI4]"
::= { scsiTransportTypes 2 }

scsiTransportFCP     OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION
     "This identity identifies a Fibre Channel Protocol for SCSI,
     Second Version."
   REFERENCE
     "T10 - SCSI Fibre Channel Protocol - 2 (FCP-2)
     - ANSI INCITS 350-2003 [FCP2]"
::= { scsiTransportTypes 3 }

scsiTransportSRP  OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION
     "This identity identifies a protocol for transporting SCSI over
     Remote Direct Memory Access (RDMA) interfaces, e.g., InfiniBand
     (tm)."
   REFERENCE
     "T10 - SCSI RDMA Protocol (SRP)
      - ANSI INCITS 365-2002 [SRP]."
::= { scsiTransportTypes 4 }

scsiTransportISCSI   OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION



     "This identity identifies an iSCSI transport."
   REFERENCE
     "IETF IPS WG - Internet Small Computer Systems Interface
      (iSCSI) [RFC3720] "
::= { scsiTransportTypes 5 }

scsiTransportSBP  OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION
     "This identity identifies the Serial Bus Protocol 3."
   REFERENCE
     "T10 - Serial Bus Protocol 3 (SBP-3)
     - ANSI INCITS 375-2004 [SBP3]."
::= { scsiTransportTypes 6 }

scsiTransportSAS  OBJECT-IDENTITY
   STATUS   current
   DESCRIPTION
     "This identity identifies the Serial Attach SCSI Protocol."
   REFERENCE
     "T10 - Serial Attached SCSI - 1.1 (SAS - 1.1)
     - #1601-D Rev-10 [SAS-1.1]."
::= { scsiTransportTypes 7 }

--****************** Instance Table *****************************
scsiInstanceTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF ScsiInstanceEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "A list of SCSI instances present on the system.
     The SCSI instance is the top-level entity, to which everything
     else belongs.  An SNMP agent could represent more than one
     instance if it represents either a stack of devices, or virtual
     partitions of a larger device, or a host running multiple SCSI
     implementations from different vendors."
::= { scsiGeneral 1 }

scsiInstanceEntry OBJECT-TYPE
   SYNTAX         ScsiInstanceEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
     "An entry (row) containing management information applicable to
     a particular SCSI instance."
   INDEX { scsiInstIndex }
::= { scsiInstanceTable 1 }




ScsiInstanceEntry ::= SEQUENCE {
   scsiInstIndex              ScsiIndexValue,
   scsiInstAlias              SnmpAdminString,
   scsiInstSoftwareIndex      ScsiHrSWInstalledIndexOrZero,
   scsiInstVendorVersion      SnmpAdminString,
   scsiInstScsiNotificationsEnable  TruthValue,
   scsiInstStorageType        StorageType
}

scsiInstIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object represents an arbitrary integer used to uniquely
     identify a particular SCSI instance."
::= { scsiInstanceEntry 1 }

scsiInstAlias OBJECT-TYPE
   SYNTAX      SnmpAdminString (SIZE(0..79))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "This object represents an administrative string, configured by
     the administrator.  It can be a zero-length string."
::= { scsiInstanceEntry 2 }

scsiInstSoftwareIndex    OBJECT-TYPE
   SYNTAX      ScsiHrSWInstalledIndexOrZero
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "If this management instance corresponds to an installed
     software module, then this object's value is the value of the
     hrSWInstalledIndex of that module.  If there is no
     correspondence to an installed software module (or no module
     that has an hrSWInstalledIndex value), then the value of this
     object is zero."
   REFERENCE
     "hrSWInstalledIndex is defined in the Host Resources MIB,
     [RFC2790]."
::= { scsiInstanceEntry 3 }

scsiInstVendorVersion OBJECT-TYPE
   SYNTAX      SnmpAdminString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION



     "This object represents a text string set by the manufacturer
     describing the version of this instance.  The format of this
     string is determined solely by the manufacturer and is for
     informational purposes only.  It is unrelated to the SCSI
     specification version numbers."
::= { scsiInstanceEntry 4 }

scsiInstScsiNotificationsEnable  OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "This object indicates whether notifications defined in this
      MIB module will be generated."
   DEFVAL { true }
::= { scsiInstanceEntry 5 }

scsiInstStorageType OBJECT-TYPE
    SYNTAX       StorageType
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
           "This object specifies the memory realization for
           this SCSI entity.
           Specifically, each row in the following tables:

                      scsiIntrDevTable
                      scsiDscTgtTable
                      scsiAuthorizedIntrTable
                      scsiLunMapTable

           has a StorageType as specified by the instance of
           this object that is INDEXed by the same value of
           scsiInstIndex.
           This value of this object is also used to indicate
           the persistence across reboots of writable values in
           its row of the scsiInstanceTable.
           Conceptual rows having the value 'permanent' need not
           allow write-access to any columnar objects in the row,
           nor to any object belonging to a table whose entry is
           INDEXed by the same value of scsiInstIndex."
    DEFVAL { nonVolatile }
::= { scsiInstanceEntry 6 }


--******************** Device Table ********************************
scsiDeviceTable  OBJECT-TYPE
   SYNTAX           SEQUENCE OF ScsiDeviceEntry



   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "A list of SCSI devices contained in each of the SCSI manageable
     instances that this agent is reporting."
::= { scsiGeneral 2 }

scsiDeviceEntry OBJECT-TYPE
   SYNTAX         ScsiDeviceEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
     "An entry (row) containing management information applicable to
     a particular SCSI device included in this SCSI manageable
     instance identifiable by the value of scsiInstIndex."
   INDEX {scsiInstIndex, scsiDeviceIndex}
::= { scsiDeviceTable 1 }

ScsiDeviceEntry ::= SEQUENCE {
   scsiDeviceIndex      ScsiIndexValue,
   scsiDeviceAlias      SnmpAdminString,
   scsiDeviceRole       BITS,
   scsiDevicePortNumber Unsigned32
}

scsiDeviceIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object is an arbitrary integer used to uniquely identify
     a particular device within a particular SCSI instance."
::= { scsiDeviceEntry 1 }

scsiDeviceAlias OBJECT-TYPE
   SYNTAX      SnmpAdminString (SIZE(0..79))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "This object contains an administrative name for this device.
     If no name is assigned, the value of this object is the
     zero-length string.
     The StorageType of this object is specified by the instance
     of scsiInstStorageType that is INDEXed by the same value of
     scsiInstIndex."
::= { scsiDeviceEntry 2 }

scsiDeviceRole OBJECT-TYPE



   SYNTAX      BITS {
         target(0),
         initiator(1)
   }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object determines whether this device is acting as a
     SCSI initiator device, or as a SCSI target device, or as both."
::= { scsiDeviceEntry 3 }

scsiDevicePortNumber OBJECT-TYPE
   SYNTAX      Unsigned32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of ports contained in this
     device."
::= { scsiDeviceEntry 4 }


--****************** Port Table ************************************
scsiPortTable  OBJECT-TYPE
   SYNTAX  SEQUENCE OF ScsiPortEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "A list of SCSI ports for each SCSI device in each instance."
::= { scsiGeneral 3 }

scsiPortEntry OBJECT-TYPE
   SYNTAX            ScsiPortEntry
   MAX-ACCESS        not-accessible
   STATUS            current
   DESCRIPTION
     "An entry (row) containing management information applicable to
     a particular SCSI port of a particular SCSI device in a
     particular SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex }
::= { scsiPortTable  1 }

ScsiPortEntry ::= SEQUENCE {
   scsiPortIndex        ScsiIndexValue,
   scsiPortRole         BITS,
   scsiPortTransportPtr    RowPointer,
   scsiPortBusyStatuses Counter32
}




scsiPortIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     port of a given device within a particular SCSI instance."
::= { scsiPortEntry 1 }

scsiPortRole OBJECT-TYPE
   SYNTAX      BITS {
         target(0),
         initiator(1)
   }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates whether this port is acting as a
     SCSI initiator port, or as a SCSI target port or as both."
::= { scsiPortEntry 2 }

scsiPortTransportPtr OBJECT-TYPE
   SYNTAX      RowPointer
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object is a pointer to the corresponding row in the
     scsiTransportTable.  This row contains information on the
     transport such as transport type and port name."
::= { scsiPortEntry 3 }

scsiPortBusyStatuses OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of port busy statuses sent or
     received by this port.  Note: Initiator ports only receive busy
     status and SCSI target ports only send busy status.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiPortEntry 4 }


--******************** Table of supported transports ***************
scsiTransportTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF ScsiTransportEntry
   MAX-ACCESS  not-accessible



   STATUS      current
   DESCRIPTION
     "This table contains the device transport-specific information
     for each transport connected to each device in
     scsiDeviceTable."
::= { scsiGeneral 5 }

scsiTransportEntry OBJECT-TYPE
   SYNTAX      ScsiTransportEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An entry (row) containing parameters applicable to a transport
     used by a particular device of a particular SCSI manageable
     instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiTransportIndex}
::= { scsiTransportTable 1 }

ScsiTransportEntry ::= SEQUENCE {
   scsiTransportIndex   ScsiIndexValue,
   scsiTransportType    AutonomousType,
   scsiTransportPointer RowPointer,
   scsiTransportDevName ScsiName
}

scsiTransportIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     transport within a given device within a particular SCSI
     instance."
::= { scsiTransportEntry 1 }

scsiTransportType OBJECT-TYPE
   SYNTAX      AutonomousType
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object identifies the transport type of this row of the
     transport table.  For example, if this object has the value
     scsiTransportFCP, then the identified transport is FCP."
::= { scsiTransportEntry 2 }

scsiTransportPointer OBJECT-TYPE
   SYNTAX      RowPointer
   MAX-ACCESS  read-only



   STATUS      current
   DESCRIPTION
     "This object represents a pointer to a conceptual row in a
     'transport' MIB module allowing a manager to get useful
     information for the transport described by this entry.
     For example, if the transport of this device is iSCSI, this
     object will point to the iSCSI Instance of the iSCSI MIB
     module.
     If there is no MIB for this transport, this object has the
     value 0.0."
::= { scsiTransportEntry 3 }

scsiTransportDevName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the name of this device in one of the
     format(s) appropriate for this type of transport."
::= { scsiTransportEntry 4 }

--******************** SCSI Initiator Device Table ***************
scsiIntrDevTable  OBJECT-TYPE
   SYNTAX           SEQUENCE OF ScsiIntrDevEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "This table contains information for each local SCSI initiator
     device in each instance."
::= { scsiInitiatorDevice 1}

scsiIntrDevEntry OBJECT-TYPE
   SYNTAX           ScsiIntrDevEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "An entry (row) containing information applicable to a SCSI
     initiator device within a particular SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex }
::= { scsiIntrDevTable  1 }

ScsiIntrDevEntry ::= SEQUENCE {
   scsiIntrDevTgtAccessMode   INTEGER,
   scsiIntrDevOutResets       Counter32
}

scsiIntrDevTgtAccessMode   OBJECT-TYPE
   SYNTAX      INTEGER {



         unknown(1),
         autoEnable(2),
         manualEnable(3)
   }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
     "This object controls whether or not a discovered SCSI target
     device is immediately authorized:
         - autoEnable (2) means that when a SCSI initiator device
         discovers a SCSI target device, it can use it immediately.
         - manualEnable (3) means that the SCSI initiator device
         must wait for an operator to set scsiIntrDscTgtConfigured
         = true before it is authorized.
     The StorageType of this object is specified by the instance
     of scsiInstStorageType that is INDEXed by the same value of
     scsiInstIndex."
::= { scsiIntrDevEntry 1 }

scsiIntrDevOutResets OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the total number of times that this SCSI
     initiator device has issued
     - a LOGICAL UNIT RESET or TARGET RESET task management request,
       or
     - any other SCSI transport protocol-specific action or event
       that causes a Logical Unit Reset or a Hard Reset at one or
       more SCSI target ports ([SAM2] chapters 5.9.6, 5.9.7).
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
   REFERENCE
      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
      T10 Project 1157-D, 12 September 2002
      Chapters 5.9.6 & 5.9.7 [SAM2]"
::= { scsiIntrDevEntry 2 }


-- The following section describes managed objects related to
-- SCSI initiator ports.

scsiIntrPortTable OBJECT-TYPE
   SYNTAX          SEQUENCE OF ScsiIntrPortEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION



     "This table contains all the SCSI initiator ports for each
     local SCSI initiator or target/initiator devices in each SCSI
     instance."
::= { scsiInitiatorDevice 2 }

scsiIntrPortEntry OBJECT-TYPE
   SYNTAX          ScsiIntrPortEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "An entry (row) containing information applicable to a
     particular SCSI initiator port of a particular SCSI device
     within a SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex }
::= { scsiIntrPortTable 1 }

ScsiIntrPortEntry ::= SEQUENCE {
   scsiIntrPortName           ScsiName,
   scsiIntrPortIdentifier     ScsiIdentifier,
   scsiIntrPortOutCommands    Counter32,
   scsiIntrPortWrittenMegaBytes  Counter32,
   scsiIntrPortReadMegaBytes  Counter32,
   scsiIntrPortHSOutCommands  Counter64
}

scsiIntrPortName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the name of the port assigned for use
     by the SCSI protocol.  The format will depend on the type of
     transport this port is using."
::= { scsiIntrPortEntry 1 }


scsiIntrPortIdentifier OBJECT-TYPE
   SYNTAX      ScsiIdentifier
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the identifier of the port in one of
     the format(s) appropriate for the type of transport in use."
::= { scsiIntrPortEntry 2 }

scsiIntrPortOutCommands OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "commands"



   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands sent by this
     SCSI initiator port.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiIntrPortEntry 3 }

scsiIntrPortWrittenMegaBytes  OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the amount of data in megabytes sent
     by this SCSI initiator port.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiIntrPortEntry 4 }

scsiIntrPortReadMegaBytes  OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the amount of data in megabytes
     received by this SCSI initiator port.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiIntrPortEntry 5 }

scsiIntrPortHSOutCommands  OBJECT-TYPE
   SYNTAX      Counter64
   UNITS       "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands sent by this
     SCSI initiator port.  This object provides support for systems
     that can quickly generate a large number of commands because
     they run at high speed.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiIntrPortEntry 6 }





--******************** Discovered SCSI Target Device group ********
scsiRemoteTgtDev OBJECT IDENTIFIER ::= { scsiInitiatorDevice 3 }

-- SCSI target device discovered or authorized to attach each of the
-- SCSI initiator ports of each SCSI initiator device of each
-- instance.

scsiDscTgtTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF ScsiDscTgtEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table includes all the remote (not in the local system)
     SCSI target ports that are authorized to attach to each local
     SCSI initiator port of this SCSI instance."
::= { scsiRemoteTgtDev 1 }

scsiDscTgtEntry OBJECT-TYPE
   SYNTAX         ScsiDscTgtEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
     "Each entry (row) contains information about the SCSI target
     device or port to which this SCSI initiator port (or all SCSI
     initiator ports in the SCSI initiator entry indexed by
     scsiInstIndex, scsiDeviceIndex) will attempt to attach.  The
     entry is either for all local ports (if scsiDscTgtIntrPortIndex
     is zero) or only for the specific SCSI initiator port
     identified by scsiDscTgtIntrPortIndex.  Note that if an entry in
     this table is deleted, any corresponding entries in the
     scsiDscLunsTable must be deleted as well.
     The StorageType of a row in this table is specified by the
     instance of scsiInstStorageType that is INDEXed by the same
     value of scsiInstIndex."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
   scsiDscTgtIndex }
::= { scsiDscTgtTable 1 }

ScsiDscTgtEntry ::= SEQUENCE {
   scsiDscTgtIntrPortIndex ScsiPortIndexValueOrZero,
   scsiDscTgtIndex         ScsiIndexValue,
   scsiDscTgtDevOrPort     ScsiDeviceOrPort,
   scsiDscTgtName          ScsiName,
   scsiDscTgtConfigured    TruthValue,
   scsiDscTgtDiscovered    TruthValue,
   scsiDscTgtInCommands    Counter32,
   scsiDscTgtWrittenMegaBytes Counter32,
   scsiDscTgtReadMegaBytes Counter32,



   scsiDscTgtHSInCommands  Counter64,
   scsiDscTgtLastCreation  TimeStamp,
   scsiDscTgtRowStatus     RowStatus
}

scsiDscTgtIntrPortIndex OBJECT-TYPE
   SYNTAX      ScsiPortIndexValueOrZero
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object relates to a particular local device within a
     particular SCSI instance and specifies
     - the index of the local SCSI initiator port,
     - or zero, if this entry refers to the local device and
     therefore refers to all the local SCSI initiator ports."
::= { scsiDscTgtEntry 1 }

scsiDscTgtIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object is an arbitrary integer used to uniquely identify
     a particular SCSI target device either discovered by, or
     configured for use with, one or more ports scsiDscTgtName of
     a particular device within a particular SCSI instance."
::= { scsiDscTgtEntry 2 }

scsiDscTgtDevOrPort OBJECT-TYPE
   SYNTAX      ScsiDeviceOrPort
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object indicates whether this entry describes a
     configured SCSI target device name (and applies to all ports
     on the identified SCSI target device) or an individual SCSI
     target port."
::= { scsiDscTgtEntry 3 }

scsiDscTgtName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object represents the name of this configured or
     discovered SCSI target device or port depending on the value
     of scsiDscTgtDevOrPort."
   ::= { scsiDscTgtEntry 4 }



scsiDscTgtConfigured OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object means
      -true(1): this entry has been configured by an administrator.
      -false(2): this entry has been added from a discovery
     mechanism (e.g., SendTargets, SLP, iSNS).
     An administrator can modify this value from false to true."
   DEFVAL { true }
::= { scsiDscTgtEntry 5 }

scsiDscTgtDiscovered OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object means
      -true(1): this entry has been discovered by the SCSI instance
      as result of an automatic discovery process.
      -false(2):this entry has been added by manual configuration.
     This entry is read-only because an administrator cannot change
     it.
     Note that it is an implementation decision to determine how
     long to retain a row with configured=false, such as when the
     SCSI target device is no longer visible/accessible to the local
     SCSI initiator device."
::= { scsiDscTgtEntry 6 }

scsiDscTgtInCommands OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "This object represents the number of commands received from
      this SCSI target port or device.
      Discontinuities in the value of this counter can occur at re-
      initialization of the management system, and at other times as
      indicated by the value of scsiDscTgtLastCreation."
::= { scsiDscTgtEntry 7 }

scsiDscTgtWrittenMegaBytes OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current



   DESCRIPTION
     "This object represents the amount of megabytes of data sent as
     the result of WRITE commands to this SCSI target port or device.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiDscTgtLastCreation."
::= { scsiDscTgtEntry 8 }

scsiDscTgtReadMegaBytes OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the amount of megabytes received as the
     result of READ commands to this SCSI target port or device.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiDscTgtLastCreation."
::= { scsiDscTgtEntry 9 }

scsiDscTgtHSInCommands OBJECT-TYPE
   SYNTAX      Counter64
   UNITS       "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands received by this
     SCSI target port or device.  This object provides support for
     system that can quickly generate a large number of commands
     because they run at high speed.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiDscTgtLastCreation."
::= { scsiDscTgtEntry 10 }

scsiDscTgtLastCreation OBJECT-TYPE
   SYNTAX      TimeStamp
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the value of sysUpTime when this row
     was created."
::= { scsiDscTgtEntry 11 }

scsiDscTgtRowStatus OBJECT-TYPE
   SYNTAX      RowStatus
   MAX-ACCESS  read-create



   STATUS      current
   DESCRIPTION
     "This object allows an administrator to configure dynamically a
     new entry in this table via SNMP or eventually delete it.
     An administrator is not allowed to delete an entry for which
     the value of the object scsiIntrDscTgtDiscovered is equal to
     true.
     Note that when an entry in this table is deleted, then any
     corresponding entries in the scsiDscLunsTable must also be
     automatically deleted.

     A newly created row cannot be made active until a value has
     been set for scsiDscTgtName.  In this case, the value of the
     corresponding instance of the scsiDscTgtRowStatus column will
     stay 'notReady'.
     The RowStatus TC [RFC2579] requires that this DESCRIPTION
     clause states under which circumstances other objects in this
     row can be modified:
     The value of this object has no effect on whether other objects
     in this conceptual row can be modified."
::= { scsiDscTgtEntry 12 }


--********************** LUNs discovered ***************************
scsiDscLunTable OBJECT-TYPE
   SYNTAX          SEQUENCE OF ScsiDscLunEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "This table includes all the remote (not in the local system)
     logical unit numbers (LUNs) discovered via each local SCSI
     initiator port of each local device within a particular SCSI
     instance."
::= { scsiRemoteTgtDev 2 }

scsiDscLunEntry OBJECT-TYPE
   SYNTAX          ScsiDscLunEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "An entry (row) represents a discovered LUN at a particular
     SCSI target device (scsiDscTgtIndex), where the LUN was
     discovered by a particular local SCSI initiator device within a
     particular SCSI instance, possibly via a particular local
     SCSI initiator port.
     Note that when an entry in the scsiDscTgtTable is deleted,
     all corresponding entries in this table should automatically be
     deleted."



   INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
   scsiDscTgtIndex, scsiDscLunIndex }
::= { scsiDscLunTable 1 }

ScsiDscLunEntry ::= SEQUENCE {
   scsiDscLunIndex   ScsiIndexValue,
   scsiDscLunLun     ScsiLUN
}

scsiDscLunIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object is an arbitrary integer used to uniquely identify
     a particular LUN discovered by a particular SCSI initiator port
     or a particular SCSI initiator device within a particular SCSI
     instance.
     Entries in the scsiDscLunIdTable are associated with a LUN by
     having the value of this object in their INDEX."
::= { scsiDscLunEntry 1 }

scsiDscLunLun  OBJECT-TYPE
   SYNTAX      ScsiLUN
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object contains the Logical Unit Number (LUN) of the
     discovered logical unit."
::= { scsiDscLunEntry 2 }


--******************** LU Identifiers discovered *******************
scsiDscLunIdTable OBJECT-TYPE
   SYNTAX          SEQUENCE OF ScsiDscLunIdEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "This table includes all the known LU identifiers of the remote
     (not in the local system) logical units discovered via each
     local SCSI initiator port or device of this SCSI instance."
::= { scsiRemoteTgtDev 3 }

scsiDscLunIdEntry OBJECT-TYPE
   SYNTAX           ScsiDscLunIdEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION



     "An entry (row) represents the LU identifier of a discovered
     LUN at a particular SCSI target device (scsiDscTgtIndex), where
     the LUN was discovered by a particular local SCSI initiator
     device within a particular SCSI instance, possibly via a
     particular local SCSI initiator port."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex,
   scsiDscTgtIndex, scsiDscLunIndex, scsiDscLunIdIndex }
::= { scsiDscLunIdTable 1 }

ScsiDscLunIdEntry ::= SEQUENCE {
   scsiDscLunIdIndex       ScsiIndexValue,
   scsiDscLunIdCodeSet     ScsiIdCodeSet,
   scsiDscLunIdAssociation ScsiIdAssociation,
   scsiDscLunIdType        ScsiIdType,
   scsiDscLunIdValue       ScsiIdValue
}

scsiDscLunIdIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object is an arbitrary integer used to uniquely identify
     a particular LUN identifier discovered by each SCSI initiator
     device or particular SCSI initiator port within a particular
     SCSI instance."
::= { scsiDscLunIdEntry 1 }

scsiDscLunIdCodeSet OBJECT-TYPE
   SYNTAX          ScsiIdCodeSet
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION
     "This object specifies the code set in use with this
     identifier.  The value is represented in the same format as
     is contained in the identifier's Identification Descriptor
     within the logical unit's Device Identification Page."
   REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
::= { scsiDscLunIdEntry 2 }

scsiDscLunIdAssociation OBJECT-TYPE
   SYNTAX          ScsiIdAssociation
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION



     "This object specifies what the identifier is associated with
     (e.g., with the addressed physical/logical device or with a
     particular port).  The value is represented in the same format
     as is contained in the identifier's Identification Descriptor
     within the logical unit's Device Identification Page."
   REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
::= { scsiDscLunIdEntry 3 }

scsiDscLunIdType OBJECT-TYPE
   SYNTAX          ScsiIdType
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION
     "This object specifies the type of the identifier.
     The value is represented in the same format as is contained in
     the identifier's Identification Descriptor within the logical
     unit's Device Identification Page."
   REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
::= { scsiDscLunIdEntry 4 }

scsiDscLunIdValue OBJECT-TYPE
   SYNTAX         ScsiIdValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
     "This object represents the actual value of this identifier.
     The format is defined by the objects scsiDscLunIdCodeSet,
     scsiDscLunIdAssociation, scsiDscLunIdType.
     The value is represented in the same format as is contained in
     the identifier's Identification Descriptor within the logical
     unit's Device Identification Page."
     REFERENCE
       "ANSI - SCSI Primary Commands - 2 (SPC-2),
       ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
       Vital Product Data Parameters [SPC2]"
::= { scsiDscLunIdEntry 5 }

--***** Table of SCSI Target Device Attached to local SCSI
--***** Initiator Ports
scsiAttTgtPortTable OBJECT-TYPE
   SYNTAX   SEQUENCE OF ScsiAttTgtPortEntry
   MAX-ACCESS  not-accessible



   STATUS      current
   DESCRIPTION
     "This table includes all the remote (not in the local system)
     SCSI target ports that are currently attached to each local
     SCSI initiator port of this SCSI instance."
::= { scsiRemoteTgtDev 4 }

scsiAttTgtPortEntry OBJECT-TYPE
   SYNTAX           ScsiAttTgtPortEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "An entry (row) represents a remote SCSI target port
     (scsiAttTgtPortIndex) currently attached to a particular
     SCSI initiator port (scsiPortIndex) of a particular SCSI
     initiator device within a particular SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex,
   scsiAttTgtPortIndex }
::= { scsiAttTgtPortTable 1 }

ScsiAttTgtPortEntry ::= SEQUENCE {
   scsiAttTgtPortIndex     ScsiIndexValue,
   scsiAttTgtPortDscTgtIdx ScsiIndexValueOrZero,
   scsiAttTgtPortName      ScsiName,
   scsiAttTgtPortIdentifier   ScsiIdentifier
}

scsiAttTgtPortIndex  OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An arbitrary integer used to uniquely identify a particular
     SCSI target currently attached to a particular SCSI initiator
     port of a particular SCSI initiator device within a particular
     SCSI instance."
::= { scsiAttTgtPortEntry 1 }

scsiAttTgtPortDscTgtIdx OBJECT-TYPE
   SYNTAX      ScsiIndexValueOrZero
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object contains the value of the scsiDscTgtIntrPortIndex
     index variable for the row in the scsiDscTgtTable representing
     this currently attached SCSI target port.  If the currently
     attached SCSI target port is not represented in the
     scsiDscTgtTable, then the value of this object is zero."



::= { scsiAttTgtPortEntry 2 }

scsiAttTgtPortName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object contains the name of the attached SCSI target
     port."
::= { scsiAttTgtPortEntry 3 }

scsiAttTgtPortIdentifier OBJECT-TYPE
   SYNTAX      ScsiIdentifier
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object contains the identifier of the attached SCSI
     target port."
::= { scsiAttTgtPortEntry 4 }

-- *****************************************************************
-- ***** Table of SCSI Target devices
--
scsiTgtDevTable OBJECT-TYPE
   SYNTAX   SEQUENCE OF ScsiTgtDevEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "This table contains information about each local SCSI target
     device."
::= { scsiTargetDevice 1 }

scsiTgtDevEntry OBJECT-TYPE
   SYNTAX           ScsiTgtDevEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "An entry (row) containing information applicable to a
     particular local SCSI target device within a particular SCSI
     instance."
   INDEX { scsiInstIndex, scsiDeviceIndex }
::= { scsiTgtDevTable 1 }

ScsiTgtDevEntry ::= SEQUENCE {
   scsiTgtDevNumberOfLUs   Gauge32,
   scsiTgtDeviceStatus     INTEGER,
   scsiTgtDevNonAccessibleLUs Gauge32,
   scsiTgtDevResets        Counter32



}

scsiTgtDevNumberOfLUs OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object is the number of logical units accessible via this
     local SCSI target device."
::= { scsiTgtDevEntry 1 }

scsiTgtDeviceStatus  OBJECT-TYPE
   SYNTAX      INTEGER {
      unknown(1),
      available(2),
      broken(3),
      readying(4),
      abnormal(5),
      nonAddrFailure(6),
      nonAddrFailReadying(7),
      nonAddrFailAbnormal(8)
   }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the status of this SCSI device,
     summarizing the state of both the addressable devices (i.e.,
     the logical units) and the non-addressable devices within this
     SCSI device:
          - unknown(1): This value is used when the status cannot be
          determined
          - available(2): All addressable and non-addressable
          devices within the SCSI device are fully operational (i.e.,
          no logical units have an abnormal status).
          - broken(3): The SCSI device is not operational and cannot
          be made operational without external intervention.
          - readying(4): One or more logical units within the SCSI
          device are being initialized and access to the SCSI device
          is temporarily limited (i.e., one or more of the logical
          units have a readying status).
          - abnormal(5): One or more addressable devices within the
          SCSI device are indicating a status other than available;
          nevertheless, the SCSI device is operational (i.e., one or
          more of the logical units have an abnormal status).
          - nonAddrFailure(6): One or more non-addressable devices
          within the SCSI device have failed; nevertheless, the SCSI
          device is operational (i.e., no logical units have an
          abnormal or readying status).



          - nonAddrFailReadying(7): One or more non-addressable
          devices within the SCSI device have failed; nevertheless,
          one or more logical units within the SCSI device are being
          initialized and access to the SCSI device is temporarily
          limited.
          - nonAddrFailAbnormal(8): One or more non-addressable
          devices within the SCSI device have failed and one or more
          addressable devices within the SCSI device are indicating a
          status other than available; however, the SCSI device is
          operational.
     "
   REFERENCE
     "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
     6.3.1.8 REPORT STATES service action [SCC2]"
::= { scsiTgtDevEntry 2}

scsiTgtDevNonAccessibleLUs OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object is the number of logical units existing but not
     currently accessible via this local SCSI target device."
::= { scsiTgtDevEntry 3 }

scsiTgtDevResets     OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object counts the number of hard resets encountered
     by this SCSI target device.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
   REFERENCE
      "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
      T10 Project 1157-D, 12 September 2002 - Chapter 5.9.7 [SAM2]"
::= { scsiTgtDevEntry 4 }


--******************** SCSI Target Port Table *********************
scsiTgtPortTable OBJECT-TYPE
   SYNTAX   SEQUENCE OF ScsiTgtPortEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table includes all the local SCSI target ports of all the
     local SCSI target devices."



::= { scsiTargetDevice 2 }

scsiTgtPortEntry OBJECT-TYPE
   SYNTAX   ScsiTgtPortEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An entry (row) containing information applicable to a
     particular local SCSI target port of a particular local SCSI
     target device within a particular SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex}
::= { scsiTgtPortTable 1 }

ScsiTgtPortEntry ::= SEQUENCE {
   scsiTgtPortName         ScsiName,
   scsiTgtPortIdentifier   ScsiIdentifier,
   scsiTgtPortInCommands   Counter32,
   scsiTgtPortWrittenMegaBytes   Counter32,
   scsiTgtPortReadMegaBytes   Counter32,
   scsiTgtPortHSInCommands Counter64
}

scsiTgtPortName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the name of the port assigned for use
     in the SCSI protocol."
::= { scsiTgtPortEntry 1 }

scsiTgtPortIdentifier OBJECT-TYPE
   SYNTAX      ScsiIdentifier
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the identifier of the port in one of
     the format(s) appropriate for the type of transport."
::= { scsiTgtPortEntry 2 }

scsiTgtPortInCommands OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands received by this
     SCSI target port.



     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiTgtPortEntry 3 }

scsiTgtPortWrittenMegaBytes OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the amount of data written in megabytes
     by this SCSI target port.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiTgtPortEntry 4 }

scsiTgtPortReadMegaBytes OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the amount of data read in megabytes by
     this SCSI target port.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiTgtPortEntry 5 }

scsiTgtPortHSInCommands OBJECT-TYPE
   SYNTAX      Counter64
   UNITS    "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands received.  This
     object provides support for systems that can quickly generate a
     large number of commands because they run at high speed.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system."
::= { scsiTgtPortEntry 6 }

scsiRemoteIntrDev OBJECT IDENTIFIER ::= { scsiTargetDevice 3 }

-- The scsiAuthorizedIntrTable contains the list of remote initiator
-- ports that are authorized to be attached to specific SCSI target
-- ports and on which an administrator would like to keep permanent
-- information and long term statistics even when not currently
-- attached.



scsiAuthorizedIntrTable OBJECT-TYPE
   SYNTAX   SEQUENCE OF ScsiAuthorizedIntrEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table includes all the authorized SCSI initiator devices
     or ports that may attach a SCSI target device
     (ScsiAuthIntrTgtPortIndex = 0) or port (ScsiAuthIntrTgtPortIndex
     different than 0) of the local SCSI instance.  Statistics are
     kept for each such authorization; thus, the authorizations
     should be configured in the manner that will cause the desired
     set of statistics to be collected and that will determine the
     correct LUN map."
::= { scsiRemoteIntrDev 1 }

scsiAuthorizedIntrEntry OBJECT-TYPE
   SYNTAX      ScsiAuthorizedIntrEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An entry (row) represents a remote SCSI initiator port or
     remote SCSI initiator device that may attach to the local SCSI
     target port or device within a particular SCSI instance.
     The StorageType of a row in this table is specified by the
     instance of scsiInstStorageType that is INDEXed by the same
     value of scsiInstIndex."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiAuthIntrTgtPortIndex,
   scsiAuthIntrIndex }
::= { scsiAuthorizedIntrTable 1 }

ScsiAuthorizedIntrEntry ::= SEQUENCE {
   scsiAuthIntrTgtPortIndex   ScsiPortIndexValueOrZero,
   scsiAuthIntrIndex          ScsiIndexValue,
   scsiAuthIntrDevOrPort      ScsiDeviceOrPort,
   scsiAuthIntrName           ScsiName,
   scsiAuthIntrLunMapIndex    ScsiIndexValueOrZero,
   scsiAuthIntrAttachedTimes  Counter32,
   scsiAuthIntrOutCommands    Counter32,
   scsiAuthIntrReadMegaBytes  Counter32,
   scsiAuthIntrWrittenMegaBytes  Counter32,
   scsiAuthIntrHSOutCommands  Counter64,
   scsiAuthIntrLastCreation   TimeStamp,
   scsiAuthIntrRowStatus      RowStatus
}


scsiAuthIntrTgtPortIndex OBJECT-TYPE
   SYNTAX      ScsiPortIndexValueOrZero



   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object contains either the index of the port or zero, to
     indicate any port, on the particular local SCSI target device."
::= { scsiAuthorizedIntrEntry 1 }

scsiAuthIntrIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object is an arbitrary integer used to uniquely identify
     a SCSI initiator device or port that is authorized to attach
     to a particular local SCSI target device or port of a particular
     SCSI instance."
::= { scsiAuthorizedIntrEntry 2 }

scsiAuthIntrDevOrPort OBJECT-TYPE
   SYNTAX      ScsiDeviceOrPort
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object specifies whether this entry refers to a remote
     SCSI initiator port or to a SCSI initiator device.
     A value of device(1) means that the authorized remote initiator
     is a SCSI initiator device and includes all of its ports.
     A value of port(2) means that the authorized remote initiator
     is a SCSI initiator port."
::= { scsiAuthorizedIntrEntry 3 }

scsiAuthIntrName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object represents the name of the remote SCSI initiator
     device or port authorized by this row."
::= { scsiAuthorizedIntrEntry 4 }

scsiAuthIntrLunMapIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValueOrZero
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object identifies the set of entries in the
     scsiLunMapTable for which scsiLunMapIndex has the same value as
     the value of this object.  The identified set of entries



     constitutes the LUN map to be used for accessing logical units
     when the remote SCSI initiator port or device corresponding to
     this entry is attached to any local SCSI target port or device
     corresponding to this entry.
     Note that this object has a value of zero if this entry should
     use the default LUN map."
::= { scsiAuthorizedIntrEntry 5 }

scsiAuthIntrAttachedTimes  OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "Times"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates the number of times that this remote
     SCSI initiator device or port has transitioned from unattached
     to attached to this local SCSI target device or port.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiAuthIntrLastCreation."
::= { scsiAuthorizedIntrEntry 6 }

scsiAuthIntrOutCommands OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates the number of commands that the remote
     SCSI initiator device or port corresponding to this entry has
     sent to the local SCSI target device or port corresponding to
     this entry.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiAuthIntrLastCreation."
::= { scsiAuthorizedIntrEntry 7 }

scsiAuthIntrReadMegaBytes  OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates the amount of data in megabytes that
     the remote SCSI initiator device or port corresponding to this
     entry has read from the local SCSI target device or port
     corresponding to this entry.
     Discontinuities in the value of this counter can occur at re-



     initialization of the management system, and at other times as
     indicated by the value of scsiAuthIntrLastCreation."
::= { scsiAuthorizedIntrEntry 8 }

scsiAuthIntrWrittenMegaBytes  OBJECT-TYPE
   SYNTAX      Counter32
   UNITS    "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates the amount of data in megabytes that the
     remote SCSI initiator device or port corresponding to this
     entry has written to the local SCSI target device or port
     corresponding to this entry.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiAuthIntrLastCreation."
::= { scsiAuthorizedIntrEntry 9}

scsiAuthIntrHSOutCommands  OBJECT-TYPE
   SYNTAX      Counter64
   UNITS    "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands sent by the
     remote SCSI initiator device or port corresponding to this
     entry to the local SCSI target device or port corresponding to
     this entry.  This object provides support for systems that can
     quickly generate a large number of commands because they run at
     high speed.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiAuthIntrLastCreation."
::= { scsiAuthorizedIntrEntry 10 }

scsiAuthIntrLastCreation OBJECT-TYPE
   SYNTAX      TimeStamp
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates the value of sysUpTime when this row was
     last created."
::= { scsiAuthorizedIntrEntry 11 }

scsiAuthIntrRowStatus OBJECT-TYPE
   SYNTAX      RowStatus
   MAX-ACCESS  read-create



   STATUS      current
   DESCRIPTION
     "This object allows an administrator to create or delete this
     entry.
     A newly created row cannot be made active until a value has
     been set for scsiAuthIntrName.  In this case, the value of the
     corresponding instance of the scsiAuthIntrRowStatus column will
     stay 'notReady'.
     The RowStatus TC [RFC2579] requires that this DESCRIPTION
     clause states under which circumstances other objects in this
     row can be modified:
     The value of this object has no effect on whether other objects
     in this conceptual row can be modified."
::= { scsiAuthorizedIntrEntry 12 }


-- Table of SCSI initiator devices or ports attached to local
-- SCSI target ports
--

scsiAttIntrPortTable OBJECT-TYPE
   SYNTAX  SEQUENCE OF ScsiAttIntrPortEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "This table includes all the remote SCSI initiator ports that
     are currently attached to a local SCSI target port of all local
     devices within all SCSI instances."
::= { scsiRemoteIntrDev 2 }

scsiAttIntrPortEntry OBJECT-TYPE
   SYNTAX          ScsiAttIntrPortEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "An entry (row) represents a remote SCSI initiator port
     currently attached to a particular local SCSI target port of a
     particular SCSI target device of a particular SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex,
   scsiAttIntrPortIndex }
::= { scsiAttIntrPortTable 1 }

ScsiAttIntrPortEntry ::= SEQUENCE {
   scsiAttIntrPortIndex    ScsiIndexValue,
   scsiAttIntrPortAuthIntrIdx ScsiIndexValueOrZero,
   scsiAttIntrPortName     ScsiName,
   scsiAttIntrPortIdentifier       ScsiIdentifier
}



scsiAttIntrPortIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object represents an arbitrary integer used to uniquely
     identify a particular attached remote initiator port to a
     particular SCSI target port within a particular SCSI target
     device within a particular SCSI instance."
::= { scsiAttIntrPortEntry 1 }

scsiAttIntrPortAuthIntrIdx OBJECT-TYPE
   SYNTAX      ScsiIndexValueOrZero
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object is the corresponding index in the
     scsiAuthorizedIntrTable for this current attached remote
     SCSI initiator device or zero if this remote attached SCSI
     initiator device is not configured in that table."
::= { scsiAttIntrPortEntry 2 }

scsiAttIntrPortName OBJECT-TYPE
   SYNTAX      ScsiName
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the name of the remote SCSI initiator
     device attached to this local SCSI target port."
::= { scsiAttIntrPortEntry 3 }

scsiAttIntrPortIdentifier OBJECT-TYPE
   SYNTAX      ScsiIdentifier
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the identifier of the remote SCSI
     initiator device attached to this local SCSI target port."
::= { scsiAttIntrPortEntry 4 }

--****************** Managed Objects regarding logical units *******
scsiLuTable OBJECT-TYPE
   SYNTAX   SEQUENCE OF ScsiLuEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table contains the logical units exposed by local SCSI
     target devices.



     It includes attributes for the World Wide Name (WWN),
     scsiLuVendorId, scsiLuProductId, and scsiLuRevisionId, which may
     also appear in the scsiLuIdTable.  If an implementation exposes
     a WWN as a LuIdTable entry, it must match the scsiLuWwnName in
     this table.  If an implementation exposes a (vendor, product,
     revision) identifier as an LuIdTable entry, each of these fields
     must match the scsiLuVendorId, scsiLuProductId, and
     scsiLuRevisionId attributes in this table."
::= { scsiLogicalUnit 1 }

scsiLuEntry OBJECT-TYPE
   SYNTAX      ScsiLuEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An entry (row) contains information applicable to a particular
     logical unit of a particular local SCSI target device within a
     particular SCSI instance."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiLuIndex}
::= { scsiLuTable 1 }

ScsiLuEntry ::= SEQUENCE {
   scsiLuIndex          ScsiIndexValue,
   scsiLuDefaultLun     ScsiLUN,
   scsiLuWwnName        ScsiLuNameOrZero,
   scsiLuVendorId       SnmpAdminString,
   scsiLuProductId      SnmpAdminString,
   scsiLuRevisionId     SnmpAdminString,
   scsiLuPeripheralType Unsigned32,
   scsiLuStatus         INTEGER,
   scsiLuState          BITS,
   scsiLuInCommands     Counter32,
   scsiLuReadMegaBytes  Counter32,
   scsiLuWrittenMegaBytes     Counter32,
   scsiLuInResets       Counter32,
   scsiLuOutTaskSetFullStatus    Counter32,
   scsiLuHSInCommands   Counter64,
   scsiLuLastCreation   TimeStamp
}

scsiLuIndex OBJECT-TYPE
   SYNTAX      ScsiIndexValue
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This object represents an arbitrary integer used to uniquely
     identify a particular logical unit within a particular SCSI
     target device within a particular SCSI instance."



::= { scsiLuEntry 1 }

scsiLuDefaultLun OBJECT-TYPE
   SYNTAX      ScsiLUN
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the default Logical Unit Number (LUN)
     for this logical unit; if a SCSI initiator device has not been
     configured to view this logical unit via an entry in the
     ScsiLunMapTable, the LU will be visible as scsiLuDefaultLun.
     If this logical unit does not have a default LUN, it will only
     be visible if specified via the ScsiLunMapTable, and this
     object will contain a zero-length string."
::= { scsiLuEntry 2 }

scsiLuWwnName OBJECT-TYPE
   SYNTAX      ScsiLuNameOrZero
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the World Wide Name of this LU that is
     the device identifier of the Vital Product Data (VPD) page name;
     if there is no WWN for this LU, this object will contain a
     zero-length string.  If there is more than one identifier, they
     will be listed in the scsiLuIdTable and this object will contain
     a zero-length string."
::= { scsiLuEntry 3 }

scsiLuVendorId OBJECT-TYPE
   SYNTAX      SnmpAdminString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents a string identifying the vendor of this
     LU as reported in the Standard INQUIRY data."
::= { scsiLuEntry 4 }

scsiLuProductId OBJECT-TYPE
   SYNTAX      SnmpAdminString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents a string identifying the product for
     this LU as reported in the Standard INQUIRY data."
::= { scsiLuEntry 5 }

scsiLuRevisionId OBJECT-TYPE



   SYNTAX      SnmpAdminString
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents a string defining the product revision
     of this LU as reported in the Standard INQUIRY data."
::= { scsiLuEntry 6 }

scsiLuPeripheralType OBJECT-TYPE
   SYNTAX      Unsigned32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object is the value returned by SCSI Standard INQUIRY
     data.  It can be: direct-access device, sequential-access
     device, printer, communication device and so on.
     The values that can be returned here are defined in SCSI
     Primary Commands -2."
   REFERENCE
     "ANSI - SCSI Primary Commands - 2 (SPC-2),
     ANSI INCITS 351-2001,11 July 2001 [SPC2]- Table 48."
::= { scsiLuEntry 7 }

scsiLuStatus   OBJECT-TYPE
   SYNTAX      INTEGER {
      unknown(1),
      available(2),
      notAvailable(3),
      broken(4),
      readying(5),
      abnormal(6)
   }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the status of this logical unit:
       - unknown(1): The status of this logical unit cannot be
       determined.
       - available(2): The logical unit is fully operational (i.e.,
       accepts media access SCSI commands and has no state
       information to report).
       - notAvailable(3): The logical unit is capable of being
       supported but is not available (i.e., no logical unit is
       currently present or the logical unit is present but not
       configured for use).
       - broken(4): The logical unit has failed and cannot respond
       to SCSI commands.
       - readying(5): The logical unit is being initialized and



       access is temporarily limited.
       - abnormal(6): The logical unit has state information
       available that indicates it is operating with limits.  The
       scsiLuState indicates what those limits are.
     "
   REFERENCE
     "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
     6.3.1.8 REPORT STATES service action [SCC2]"
::= { scsiLuEntry 8 }

scsiLuState OBJECT-TYPE
   SYNTAX      BITS {
      dataLost(0),
      dynamicReconfigurationInProgress(1),
      exposed(2),
      fractionallyExposed(3),
      partiallyExposed(4),
      protectedRebuild(5),
      protectionDisabled(6),
      rebuild(7),
      recalculate(8),
      spareInUse(9),
      verifyInProgress(10)
   }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the state of a logical unit and its
     meaning according to the bit position:
          0 Data lost: Within the logical unit data has been lost.
          1 Dynamic reconfiguration in progress: The logical unit is
               being reconfigured.  In this state all data is still
               protected.
          2 Exposed: Within the logical unit data is not protected.
               In this state all data is still valid; however, loss
               of data or data availability is unavoidable in the
               event of a failure.
          3 Fractionally exposed: Within the logical unit part of
               the data is not protected.  In this state all data is
               still valid; however, a failure may cause a loss of
               data or a loss of data availability.
          4 Partially exposed: Within the logical unit one or more
               underlying storage devices have failed.  In this state
               all data is still protected.
          5 Protected rebuild: The logical unit is in the process of
               a rebuild operation.  In this state all data is
               protected.
          6 Protection disabled: Within the logical unit the data



               protection method has been disabled.
               In this state all data is still valid; however,
               loss of data or data availability is unavoidable
               in the event of a failure.
          7 Rebuild: The data protection method is in the process of
               rebuilding data.  In this state data is not protected.
          8 Recalculate: The logical unit is in the process of a
               recalculate operation.
          9 Spare in use: Within the logical unit a storage device
               in full or part is being used to store data.  In this
               state all data is still protected.
          10 Verify in progress: Within the logical unit data is
               being verified."
     REFERENCE
      "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
       6.3.1.8 REPORT STATES service action [SCC2]"
::= { scsiLuEntry 9 }

scsiLuInCommands OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "commands"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of commands received by this
     logical unit.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiLuLastCreation."
::= { scsiLuEntry 10 }

scsiLuReadMegaBytes OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "Megabytes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the amount of data in megabytes read
     from this logical unit.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiLuLastCreation."
::= { scsiLuEntry 11 }

scsiLuWrittenMegaBytes OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "Megabytes"
   MAX-ACCESS  read-only



   STATUS      current
   DESCRIPTION
     "This object represents the amount of data in megabytes written
     to this logical unit.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiLuLastCreation."
::= { scsiLuEntry 12 }

scsiLuInResets OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "resets"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of times that this logical
     unit received
     - a LOGICAL UNIT RESET or TARGET RESET task management request,
     or
     - any other SCSI transport protocol-specific action or event
     that causes a Logical Unit Reset or a Hard Reset at a SCSI
     target port of the containing device
     ([SAM2] Chapters 5.9.6, 5.9.7).
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiLuLastCreation."
   REFERENCE
     "SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
     T10 Project 1157-D, 12 September 2002 - Chapter 5.9.7 [SAM2]"
::= { scsiLuEntry 13 }

scsiLuOutTaskSetFullStatus    OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object represents the number of Task Set full statuses
     issued for this logical unit.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiLuLastCreation."
::= { scsiLuEntry 14 }

scsiLuHSInCommands OBJECT-TYPE
   SYNTAX      Counter64
   UNITS       "commands"
   MAX-ACCESS  read-only
   STATUS      current



   DESCRIPTION
     "This object represents the number of commands received by this
     logical unit.  This object provides support for systems that can
     quickly generate a large number of commands because they run at
     high speed.
     Discontinuities in the value of this counter can occur at re-
     initialization of the management system, and at other times as
     indicated by the value of scsiLuLastCreation."
::= { scsiLuEntry 15 }

scsiLuLastCreation OBJECT-TYPE
   SYNTAX      TimeStamp
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "This object indicates the value of sysUpTime when this row was
     last created."
::= { scsiLuEntry 16 }

--****************** Logical Unit Identifier Table *****************
scsiLuIdTable OBJECT-TYPE
   SYNTAX  SEQUENCE OF ScsiLuIdEntry
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
      "A table of identifiers for all logical units exposed by the
      local SCSI target device."
::= { scsiLogicalUnit 2 }

scsiLuIdEntry OBJECT-TYPE
   SYNTAX      ScsiLuIdEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An entry (row) containing information applicable to a
     particular identifier for a particular logical unit of a
     particular SCSI target device within a particular SCSI
     instance."
   INDEX {scsiInstIndex, scsiDeviceIndex, scsiLuIndex, scsiLuIdIndex}
::= { scsiLuIdTable 1 }

ScsiLuIdEntry ::= SEQUENCE {
   scsiLuIdIndex        ScsiIndexValue,
   scsiLuIdCodeSet      ScsiIdCodeSet,
   scsiLuIdAssociation  ScsiIdAssociation,
   scsiLuIdType         ScsiIdType,
   scsiLuIdValue        ScsiIdValue
}



scsiLuIdIndex  OBJECT-TYPE
   SYNTAX          ScsiIndexValue
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "This object represents an arbitrary integer used to uniquely
     identify a particular LU identifier within a particular logical
     unit within a particular SCSI target device within a particular
     SCSI instance."
::= { scsiLuIdEntry 1 }

scsiLuIdCodeSet OBJECT-TYPE
   SYNTAX           ScsiIdCodeSet
   MAX-ACCESS       read-only
   STATUS           current
   DESCRIPTION
     "This object specifies the code set in use with this
     identifier.  The value is represented in the same format as is
     contained in the identifier's Identification Descriptor within
     the logical unit's Device Identification Page."
   REFERENCE
     "ANSI - SCSI Primary Commands - 2 (SPC-2),
     ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
     Vital Product Data Parameters [SPC2]"
::= { scsiLuIdEntry 2 }

scsiLuIdAssociation OBJECT-TYPE
   SYNTAX           ScsiIdAssociation
   MAX-ACCESS       read-only
   STATUS           current
   DESCRIPTION
     "This object specifies what the identifier is associated with
     (e.g., with the addressed physical/logical device or with a
     particular port).  The value is represented in the same format
     as is contained in the identifier's Identification Descriptor
     within the logical unit's Device Identification Page."
   REFERENCE
     "ANSI - SCSI Primary Commands - 2 (SPC-2),
     ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
     Vital Product Data Parameters [SPC2]"
::= { scsiLuIdEntry 3 }

scsiLuIdType   OBJECT-TYPE
   SYNTAX           ScsiIdType
   MAX-ACCESS       read-only
   STATUS           current
   DESCRIPTION
     "This object specifies the type of the identifier.



     The value is represented in the same format as is contained in
     the identifier's Identification Descriptor within the logical
     unit's Device Identification Page."
   REFERENCE
     "ANSI - SCSI Primary Commands - 2 (SPC-2),
     ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
     Vital Product Data Parameters [SPC2]"
::= { scsiLuIdEntry 4 }

scsiLuIdValue OBJECT-TYPE
   SYNTAX         ScsiIdValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
     "This object represents the actual value of this identifier.
     The format is defined by the objects scsiLuIdCodeSet,
     scsiLuIdAssociation, scsiLuIdType.
     The value is represented in the same format as is contained in
     the identifier's Identification Descriptor within the logical
     unit's Device Identification Page."
   REFERENCE
     "ANSI - SCSI Primary Commands - 2 (SPC-2),
     ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
     Vital Product Data Parameters [SPC2]"
::= { scsiLuIdEntry 5 }

--******************* The LUN Map Table ****************************

scsiLunMapTable OBJECT-TYPE
   SYNTAX   SEQUENCE OF ScsiLunMapEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table provides the ability to present a logical unit
     using different Logical Unit Numbers for different SCSI
     initiator devices.
     This table provides a mapping between a logical unit and a
     Logical Unit Number, and can be referenced by a
     ScsiAuthorizedIntrEntry to specify the LUN map for that
     initiator."
::= { scsiLogicalUnit 3 }

scsiLunMapEntry OBJECT-TYPE
   SYNTAX          ScsiLunMapEntry
   MAX-ACCESS      not-accessible
   STATUS          current
   DESCRIPTION
     "An entry containing information about the mapping of a



     particular logical unit to a particular LUN.  The set of
     entries that all have the same values of scsiInstIndex,
     scsiDeviceIndex and scsiLunMapIndex constitutes a LUN map
     within a particular SCSI instance.
     The StorageType of a row in this table is specified by
     the instance of scsiInstStorageType that is INDEX-ed by
     the same value of scsiInstIndex."
   INDEX { scsiInstIndex, scsiDeviceIndex, scsiLunMapIndex,
   scsiLunMapLun}
::= { scsiLunMapTable 1 }

ScsiLunMapEntry ::= SEQUENCE {
   scsiLunMapIndex      ScsiIndexValue,
   scsiLunMapLun        ScsiLUN,
   scsiLunMapLuIndex    ScsiIndexValue,
   scsiLunMapRowStatus  RowStatus
}

scsiLunMapIndex   OBJECT-TYPE
   SYNTAX           ScsiIndexValue
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "This object represents an arbitrary integer used to uniquely
     identify a particular LunMap within a particular SCSI target
     device within a particular SCSI instance."
::= { scsiLunMapEntry 1 }

scsiLunMapLun     OBJECT-TYPE
   SYNTAX           ScsiLUN
   MAX-ACCESS       not-accessible
   STATUS           current
   DESCRIPTION
     "This object specifies the Logical Unit Number, to which a
     logical unit is mapped by this row."
::= { scsiLunMapEntry 2 }


scsiLunMapLuIndex OBJECT-TYPE
   SYNTAX         ScsiIndexValue
   MAX-ACCESS     read-create
   STATUS         current
   DESCRIPTION
     "This object identifies the logical unit for which the value of
     scsiLuIndex is the same as the value of this object.  The
     identified logical unit is the one mapped to a LUN by this
     row."
::= { scsiLunMapEntry 3 }



scsiLunMapRowStatus  OBJECT-TYPE
   SYNTAX          RowStatus
   MAX-ACCESS      read-create
   STATUS          current
   DESCRIPTION
     "This object allows an administrator to create and delete this
     entry."
::= { scsiLunMapEntry 4 }

--********************** Notifications ******************************
-- scsiNotifications OBJECT IDENTIFIER ::= { scsiMIB  2 }

scsiNotificationsPrefix OBJECT IDENTIFIER
                             ::= { scsiNotifications 0 }

scsiTgtDeviceStatusChanged NOTIFICATION-TYPE
   OBJECTS { scsiTgtDeviceStatus }
   STATUS  current
   DESCRIPTION
     "This notification will be generated for each occurrence of the
     abnormal status (e.g., if the SCSI target device's current
     status is abnormal) providing that the SCSI instance's value of
     scsiInstScsiNotificationsEnable is enabled.
     An SNMP agent implementing the SCSI MIB module should not send
     more than three SCSI identical notifications in any 10-second
     period."
::= { scsiNotificationsPrefix 1 }

scsiLuStatusChanged NOTIFICATION-TYPE
   OBJECTS { scsiLuStatus }
   STATUS  current
   DESCRIPTION
     "This notification will be generated each time that
     scsiLuStatus changes providing that the SCSI instance's value
     of scsiInstScsiNotificationsEnable is enabled.
     An SNMP agent implementing the SCSI MIB module should not send
     more than three SCSI identical notifications in any 10-second
     period."
::= { scsiNotificationsPrefix 2 }



--******************************************************************
-- The next part defines the conformance groups in use
-- for SCSI MIB module.
scsiCompliances OBJECT IDENTIFIER ::= { scsiConformance 1 }

scsiCompliance MODULE-COMPLIANCE



   STATUS current
   DESCRIPTION
     "Describes the requirements for compliance to this SCSI MIB
      module.
     If an implementation can be both a SCSI target device and a SCSI
     initiator device, all groups are mandatory."
   MODULE  -- this module
      MANDATORY-GROUPS {
         scsiDeviceGroup
     }

     OBJECT scsiInstAlias
     MIN-ACCESS read-only
     DESCRIPTION
        "Write access is not mandatory."

     OBJECT scsiInstScsiNotificationsEnable
     MIN-ACCESS read-only
     DESCRIPTION
        "Write access is not mandatory."

     OBJECT scsiDeviceAlias
     MIN-ACCESS read-only
     DESCRIPTION
        "Write access is not mandatory."

     OBJECT scsiInstStorageType
     MIN-ACCESS   read-only
     DESCRIPTION
        "Write access is not required."

   -- Conditionally mandatory groups to be included with
   -- the mandatory groups when the implementation has
   -- SCSI target device.

     GROUP scsiTargetDeviceGroup
     DESCRIPTION
        "This group is mandatory for all SCSI implementations that
        have SCSI target devices."
     GROUP scsiLunMapGroup
     DESCRIPTION
       "This group is mandatory for systems having the capabilities
        of mapping local SCSI target devices and logical units
        according to remote SCSI initiator devices."

     OBJECT scsiAuthIntrDevOrPort
     MIN-ACCESS   read-only
     DESCRIPTION



      "Write access is not required."

     OBJECT scsiAuthIntrName
     MIN-ACCESS   read-only
     DESCRIPTION
      "Write access is not required."

     OBJECT scsiAuthIntrLunMapIndex
     MIN-ACCESS   read-only
     DESCRIPTION
      "Write access is not required."

     OBJECT scsiAuthIntrRowStatus
     SYNTAX RowStatus { active(1) }
     MIN-ACCESS   read-only
     DESCRIPTION
       "Write access is not required, and only one of the six
       enumerated values for the RowStatus textual convention need
       be supported, specifically: active(1)."

     GROUP scsiTgtDevLuNotificationsGroup
     DESCRIPTION
       "This group is mandatory for all SCSI implementations that
       have SCSI target devices and are able to report status
       changes."


   -- Conditionally mandatory groups to be included with
   -- the mandatory groups when the implementation has
   -- SCSI initiator device.

     GROUP scsiInitiatorDeviceGroup
     DESCRIPTION
       "This group is mandatory for all SCSI implementations that
       have SCSI initiator devices."

      OBJECT scsiIntrDevTgtAccessMode
      MIN-ACCESS read-only
      DESCRIPTION "Write access is not mandatory."

      GROUP scsiDiscoveryGroup
      DESCRIPTION
        "This group is mandatory for systems having the capabilities
        of discovering remote SCSI target devices via local SCSI
        initiator devices."

      OBJECT scsiLunMapLuIndex
      MIN-ACCESS read-only



      DESCRIPTION
        "Write access is not mandatory."

      OBJECT scsiLunMapRowStatus
      SYNTAX RowStatus { active(1) }
      MIN-ACCESS read-only
      DESCRIPTION
        "Write access is not required, and only one of the six
        enumerated values for the RowStatus textual convention need
        be supported, specifically: active(1)."

      OBJECT scsiDscTgtDevOrPort
      MIN-ACCESS read-only
      DESCRIPTION
        "Write access is not mandatory."

      OBJECT scsiDscTgtName
      MIN-ACCESS read-only
      DESCRIPTION "Write access is not mandatory."

      OBJECT scsiDscTgtConfigured
      SYNTAX TruthValue { false(2) }
      MIN-ACCESS read-only
      DESCRIPTION
        "The value of true(1) is not mandatory neither is the write
        access."

      OBJECT scsiDscTgtRowStatus
      SYNTAX RowStatus { active(1) }
      MIN-ACCESS read-only
      DESCRIPTION
        "Write access is not required, and only one of the six
        enumerated values for the RowStatus textual convention need
        be supported, specifically: active(1)."

-- Conditionally mandatory groups to be included with the mandatory
-- groups when the implementation can gather statistics.

     GROUP scsiDeviceStatGroup
     DESCRIPTION
       "This group is mandatory for all SCSI implementations that
       can gather statistics."

-- Conditionally mandatory groups to be included with the mandatory
-- groups when the implementation can gather statistics at the SCSI
-- initiator device side.

     GROUP scsiInitiatorDevStatsGroup



     DESCRIPTION
       "This group is mandatory for all SCSI implementations that
       can gather statistics at SCSI initiator device side."

     GROUP scsiDiscoveryStatsGroup
     DESCRIPTION
       "This group is mandatory for system having the capabilities
       of gathering statistics regarding remote SCSI target devices
       via local SCSI initiator devices."

-- Conditionally mandatory groups to be included with the mandatory
-- groups when the implementation can gather statistics at the SCSI
-- target side.

     GROUP scsiTargetDevStatsGroup
     DESCRIPTION
       "This group is mandatory for all SCSI implementations that
       can gather statistics at SCSI target devices."

     GROUP scsiLunMapStatsGroup
     DESCRIPTION
       "This group is mandatory for SCSI implementations able to map
       local SCSI target devices and logical units according to
       remote SCSI initiator devices."

-- Conditionally mandatory groups to be included with the mandatory
-- groups when the implementation is running at high speed and can
-- gather statistics at the SCSI initiator device side.

     GROUP scsiInitiatorDevHSStatsGroup
     DESCRIPTION
       "This group is mandatory for all SCSI implementations that
       can gather statistics at the SCSI initiator device side and
       are running at high speed, meaning speed of 4 Gbit/second or
       higher."

     GROUP scsiDiscoveryHSStatsGroup
     DESCRIPTION
       "This group is mandatory for systems having the capabilities
       of gathering statistics regarding remote SCSI target devices
       via local SCSI initiator devices and are running at high
       speed, meaning speed of 4 Gbit/second or higher."

-- Conditionally mandatory groups to be included with the mandatory
-- groups when the implementation is running at high speed and can
-- gather statistics at the SCSI target side.
     GROUP scsiTargetDevHSStatsGroup
     DESCRIPTION



       "This group is mandatory for all SCSI implementations that
       can gather statistics at SCSI target devices in high speed
       systems, meaning speed of 4 Gbit/second or higher."

     GROUP scsiLunMapHSStatsGroup
     DESCRIPTION
       "This group is mandatory for SCSI implementations able to map
       local SCSI target devices and logical units according to
       remote SCSI initiator devices in a high speed system, meaning
       speed of 4 Gbit/second or higher."
::= { scsiCompliances 1 }

scsiGroups OBJECT IDENTIFIER ::= { scsiConformance 2 }

scsiDeviceGroup OBJECT-GROUP
   OBJECTS {
      scsiInstAlias,
      scsiInstSoftwareIndex,
      scsiInstVendorVersion,
      scsiInstScsiNotificationsEnable,
      scsiInstStorageType,
      scsiDeviceAlias,
      scsiDeviceRole,
      scsiDevicePortNumber,
      scsiPortRole,
      scsiPortTransportPtr,
      scsiTransportType,
      scsiTransportPointer,
      scsiTransportDevName
   }
   STATUS current
   DESCRIPTION
     "A collection of objects providing information about SCSI
     instances, devices, and ports."
::= { scsiGroups 1 }

scsiInitiatorDeviceGroup OBJECT-GROUP
   OBJECTS {
      scsiIntrDevTgtAccessMode,
      scsiIntrPortName,
      scsiIntrPortIdentifier,
      scsiAttTgtPortDscTgtIdx,
      scsiAttTgtPortName,
      scsiAttTgtPortIdentifier
   }
   STATUS current
   DESCRIPTION
     "This group is relevant for s SCSI initiator device and port."



::= { scsiGroups 2 }

scsiDiscoveryGroup OBJECT-GROUP
   OBJECTS {
      scsiDscTgtDevOrPort,
      scsiDscTgtName,
      scsiDscTgtConfigured,
      scsiDscTgtDiscovered,
      scsiDscTgtRowStatus,
      scsiDscTgtLastCreation,
      scsiDscLunLun,
      scsiDscLunIdCodeSet,
      scsiDscLunIdAssociation,
      scsiDscLunIdType,
      scsiDscLunIdValue
   }
   STATUS current
   DESCRIPTION
     "This group is relevant for the discovered SCSI target devices
     by a SCSI initiator port."
::= { scsiGroups 3 }

scsiTargetDeviceGroup OBJECT-GROUP
   OBJECTS {
      scsiTgtDevNumberOfLUs,
      scsiTgtDeviceStatus,
      scsiTgtDevNonAccessibleLUs,
      scsiTgtPortName,
      scsiTgtPortIdentifier,
      scsiAttIntrPortAuthIntrIdx,
      scsiAttIntrPortName,
      scsiAttIntrPortIdentifier,
      scsiLuDefaultLun,
      scsiLuWwnName,
      scsiLuVendorId,
      scsiLuProductId,
      scsiLuRevisionId,
      scsiLuPeripheralType,
      scsiLuStatus,
      scsiLuState,
      scsiLuLastCreation,
      scsiLuIdCodeSet,
      scsiLuIdAssociation,
      scsiLuIdType,
      scsiLuIdValue
   }
   STATUS current
   DESCRIPTION



     "This group is relevant for a SCSI target device and port."
::= { scsiGroups 4 }

scsiLunMapGroup OBJECT-GROUP
   OBJECTS {
      scsiLunMapLuIndex,
      scsiLunMapRowStatus,
      scsiAuthIntrDevOrPort,
      scsiAuthIntrName,
      scsiAuthIntrLunMapIndex,
      scsiAuthIntrLastCreation,
      scsiAuthIntrRowStatus
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of attributes regarding the mapping
     between Logical Unit Number, logical unit, and target device."
::= { scsiGroups 5}

scsiTargetDevStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiTgtDevResets,
      scsiTgtPortInCommands,
      scsiTgtPortWrittenMegaBytes,
      scsiTgtPortReadMegaBytes,
      scsiLuInCommands,
      scsiLuReadMegaBytes,
      scsiLuWrittenMegaBytes,
      scsiLuInResets,
      scsiLuOutTaskSetFullStatus
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of statistics for all
     implementations of the SCSI MIB module that contain SCSI target
     devices."
::= { scsiGroups 6}

scsiTargetDevHSStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiTgtPortHSInCommands,
      scsiLuHSInCommands
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of high speed statistics for all
     implementations of the SCSI MIB module that contain SCSI target
     devices."



::= { scsiGroups 7}

scsiLunMapStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiAuthIntrAttachedTimes,
      scsiAuthIntrOutCommands,
      scsiAuthIntrReadMegaBytes,
      scsiAuthIntrWrittenMegaBytes
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of statistics regarding SCSI
     initiator devices authorized to attach local logical unit and
     SCSI target device."
::= { scsiGroups 8}

scsiLunMapHSStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiAuthIntrHSOutCommands
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of high speed statistics regarding
     SCSI initiator devices authorized to attach local logical unit
     and SCSI target device."
::= { scsiGroups 9}

scsiInitiatorDevStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiIntrDevOutResets,
      scsiIntrPortOutCommands,
      scsiIntrPortWrittenMegaBytes,
      scsiIntrPortReadMegaBytes
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of statistics for all
     implementations of the SCSI MIB module that contain SCSI
     initiator devices."
::= { scsiGroups 10}

scsiInitiatorDevHSStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiIntrPortHSOutCommands
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of high speed statistics for all



     implementations of the SCSI MIB module that contain SCSI
     initiator devices."
::= { scsiGroups 11}

scsiDiscoveryStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiDscTgtInCommands,
      scsiDscTgtReadMegaBytes,
      scsiDscTgtWrittenMegaBytes
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of statistics for all
     implementations of the SCSI MIB module that contain discovered
     SCSI initiator devices."
::= { scsiGroups 12}

scsiDiscoveryHSStatsGroup OBJECT-GROUP
   OBJECTS {
      scsiDscTgtHSInCommands
   }
   STATUS current
   DESCRIPTION
     "This group is a collection of high speed statistics for all
     implementations of the SCSI MIB module that contain discovered
     SCSI initiator devices."
::= { scsiGroups 13}

scsiDeviceStatGroup OBJECT-GROUP
   OBJECTS {
      scsiPortBusyStatuses
   }
   STATUS current
   DESCRIPTION
     "A collection of statistics regarding SCSI devices and
     ports."
::= { scsiGroups 14 }

scsiTgtDevLuNotificationsGroup NOTIFICATION-GROUP
   NOTIFICATIONS {
      scsiTgtDeviceStatusChanged,
      scsiLuStatusChanged
   }
   STATUS current
   DESCRIPTION
     "A collection of notifications regarding status change of SCSI
     target devices and logical units."
::= { scsiGroups 15 }



END