Blob Blame History Raw
MPLS-LDP-GENERIC-STD-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE,
    MODULE-IDENTITY,
    Unsigned32
        FROM SNMPv2-SMI                                  -- [RFC2578]

    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF                                 -- [RFC2580]

    RowStatus,
    StorageType
        FROM SNMPv2-TC                                   -- [RFC2579]

    InterfaceIndexOrZero
        FROM IF-MIB                                      -- [RFC2020]

    mplsStdMIB
        FROM MPLS-TC-STD-MIB                             -- [RFC3811]

    mplsLdpEntityLdpId,
    mplsLdpEntityIndex
        FROM MPLS-LDP-STD-MIB                            -- [RFC3813]
    ;

mplsLdpGenericStdMIB MODULE-IDENTITY
    LAST-UPDATED "200406030000Z"  -- June 6, 2004
    ORGANIZATION "Multiprotocol Label Switching (mpls)
                  Working Group"
    CONTACT-INFO
        "Joan Cucchiara (jcucchiara@mindspring.com)
         Marconi Communications, Inc.

         Hans Sjostrand (hans@ipunplugged.com)
         ipUnplugged



         James V. Luciani (james_luciani@mindspring.com)
         Marconi Communications, Inc.

         Working Group Chairs:
         George Swallow,   email: swallow@cisco.com
         Loa Andersson,    email: loa@pi.se

         MPLS Working Group, email: mpls@uu.net
    "
    DESCRIPTION
        "Copyright (C) The Internet Society (year). The
        initial version of this MIB module was published
        in RFC 3815. For full legal notices see the RFC
        itself or see:
        http://www.ietf.org/copyrights/ianamib.html

        This MIB contains managed object definitions for
        configuring and monitoring the Multiprotocol Label
        Switching (MPLS), Label Distribution Protocol (LDP),
        utilizing ethernet as the Layer 2 media."
    REVISION "200406030000Z"  -- June 6, 2004
    DESCRIPTION
        "Initial version published as part of RFC 3815."

    ::= { mplsStdMIB 7 }

--****************************************************************

mplsLdpGenericObjects
         OBJECT IDENTIFIER ::= { mplsLdpGenericStdMIB 1 }
mplsLdpGenericConformance
         OBJECT IDENTIFIER ::= { mplsLdpGenericStdMIB 2 }

--****************************************************************
-- MPLS LDP GENERIC Objects
--****************************************************************

--
-- Ldp Entity Objects for Generic Labels
--

mplsLdpEntityGenericObjects  OBJECT IDENTIFIER ::=
                              { mplsLdpGenericObjects 1 }

--
-- The MPLS LDP Entity Generic Label Range Table
--



mplsLdpEntityGenericLRTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MplsLdpEntityGenericLREntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The MPLS LDP Entity Generic Label Range (LR)
        Table.

        The purpose of this table is to provide a mechanism
        for configurating a contiguous range of generic labels,
        or a 'label range' for LDP Entities.

        LDP Entities which use Generic Labels must have at least
        one entry in this table.  In other words, this table
        'extends' the mpldLdpEntityTable for Generic Labels."
    ::= { mplsLdpEntityGenericObjects 1 }

mplsLdpEntityGenericLREntry OBJECT-TYPE
    SYNTAX MplsLdpEntityGenericLREntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A row in the LDP Entity Generic Label
        Range (LR) Table.  One entry in this table contains
        information on a single range of labels
        represented by the configured Upper and Lower
        Bounds pairs.  NOTE: there is NO corresponding
        LDP message which relates to the information
        in this table, however, this table does provide
        a way for a user to 'reserve' a generic label
        range.

        NOTE:  The ranges for a specific LDP Entity
        are UNIQUE and non-overlapping.

        A row will not be created unless a unique and
        non-overlapping range is specified."
    INDEX       {  mplsLdpEntityLdpId,
                   mplsLdpEntityIndex,
                   mplsLdpEntityGenericLRMin,
                   mplsLdpEntityGenericLRMax
                }
    ::= { mplsLdpEntityGenericLRTable 1 }

MplsLdpEntityGenericLREntry ::= SEQUENCE {
    mplsLdpEntityGenericLRMin           Unsigned32,
    mplsLdpEntityGenericLRMax           Unsigned32,
    mplsLdpEntityGenericLabelSpace      INTEGER,



    mplsLdpEntityGenericIfIndexOrZero   InterfaceIndexOrZero,
    mplsLdpEntityGenericLRStorageType   StorageType,
    mplsLdpEntityGenericLRRowStatus     RowStatus
}

mplsLdpEntityGenericLRMin OBJECT-TYPE
    SYNTAX     Unsigned32(0..1048575)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The minimum label configured for this range."
    ::= { mplsLdpEntityGenericLREntry 1 }

mplsLdpEntityGenericLRMax OBJECT-TYPE
    SYNTAX     Unsigned32(0..1048575)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The maximum label configured for this range."
    ::= { mplsLdpEntityGenericLREntry 2 }

mplsLdpEntityGenericLabelSpace  OBJECT-TYPE
    SYNTAX      INTEGER {
                          perPlatform(1),
                          perInterface(2)
                         }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This value of this object is perPlatform(1), then
       this means that the label space type is
       per platform.

       If this object is perInterface(2), then this
       means that the label space type is per Interface."
    REFERENCE
        "RFC3036, LDP Specification, Section 2.2.1,
        Label Spaces."
    DEFVAL { perPlatform }
    ::= { mplsLdpEntityGenericLREntry 3 }

mplsLdpEntityGenericIfIndexOrZero OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This value represents either the InterfaceIndex of
       the 'ifLayer' where these Generic Label would be created,


       or 0 (zero).  The value of zero means that the
       InterfaceIndex is not known.

       However, if the InterfaceIndex is known,
       then it must be represented by this value.

       If an InterfaceIndex becomes known, then the
       network management entity (e.g., SNMP agent) responsible
       for this object MUST change the value from 0 (zero) to the
       value of the InterfaceIndex."
    ::= { mplsLdpEntityGenericLREntry 4 }

mplsLdpEntityGenericLRStorageType  OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The storage type for this conceptual row.
        Conceptual rows having the value 'permanent(4)'
        need not allow write-access to any columnar
        objects in the row."
    DEFVAL { nonVolatile }
    ::= { mplsLdpEntityGenericLREntry 5 }

mplsLdpEntityGenericLRRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row.  All writable
         objects in this row may be modified at any time,
         however, as described in  detail in the section
         entitled, 'Changing Values After Session
         Establishment', and again described in the
         DESCRIPTION clause of the mplsLdpEntityAdminStatus object,
         if a session has been initiated with a Peer,
         changing objects in this table will
         wreak havoc with the session and interrupt traffic.
         To repeat again:  the recommended procedure is
         to set the mplsLdpEntityAdminStatus to
         down, thereby explicitly causing a
         session to be torn down. Then, change objects
         in this entry, then set the mplsLdpEntityAdminStatus
         to enable which enables a new session to be initiated.

         There must exist at least one entry in this
         table for every LDP Entity that has a
         generic label configured."


    ::= { mplsLdpEntityGenericLREntry 6 }

--****************************************************************
-- Module Conformance Statement
--****************************************************************

mplsLdpGenericGroups
    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 1 }

mplsLdpGenericCompliances
    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 2 }

--
-- Full Compliance
--

mplsLdpGenericModuleFullCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The Module is implemented with support for
        read-create and read-write.  In other words,
        both monitoring and configuration
        are available when using this MODULE-COMPLIANCE."
    MODULE -- this module
        MANDATORY-GROUPS    {
                               mplsLdpGenericGroup
                            }

    OBJECT       mplsLdpEntityGenericLRRowStatus
    SYNTAX       RowStatus { active(1) }
    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
    DESCRIPTION
       "Support for createAndWait and notInService is not required."

    ::= { mplsLdpGenericCompliances 1 }

--
-- Read-Only Compliance
--

mplsLdpGenericModuleReadOnlyCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The Module is implemented with support for
        read-only.  In other words, only monitoring
        is available by implementing this MODULE-COMPLIANCE."
    MODULE -- this module
        MANDATORY-GROUPS    {


                               mplsLdpGenericGroup
                            }

    OBJECT       mplsLdpEntityGenericLabelSpace
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityGenericIfIndexOrZero
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityGenericLRStorageType
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityGenericLRRowStatus
    SYNTAX       RowStatus { active(1) }
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required, and active is the
       only status that needs to be supported."

    ::= { mplsLdpGenericCompliances 2 }

--
-- units of conformance
--

mplsLdpGenericGroup OBJECT-GROUP
    OBJECTS {
    mplsLdpEntityGenericLabelSpace,
    mplsLdpEntityGenericIfIndexOrZero,
    mplsLdpEntityGenericLRStorageType,
    mplsLdpEntityGenericLRRowStatus
    }
    STATUS    current
    DESCRIPTION
        "Objects that apply to all MPLS LDP implementations
        using Generic Labels as the Layer 2."
    ::= { mplsLdpGenericGroups 1 }

END