--
-- This SMIv1 module has been generated by smidump 0.4.5. Do not edit.
--
SNMPv2-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
Counter, TimeTicks
FROM RFC1155-SMI
mib-2
FROM RFC1213-MIB
snmpModules
FROM SNMPv2-SMI
DisplayString, TestAndIncr, TimeStamp
FROM SNMPv2-TC;
snmpMIB OBJECT IDENTIFIER
::= { snmpModules 1 }
-- snmpMIB MODULE-IDENTITY
-- LAST-UPDATED "200210160000Z"
-- ORGANIZATION
-- "IETF SNMPv3 Working Group"
-- CONTACT-INFO
-- "WG-EMail: snmpv3@lists.tislabs.com
-- Subscribe: snmpv3-request@lists.tislabs.com
--
-- Co-Chair: Russ Mundy
-- Network Associates Laboratories
-- postal: 15204 Omega Drive, Suite 300
-- Rockville, MD 20850-4601
-- USA
-- EMail: mundy@tislabs.com
-- phone: +1 301 947-7107
--
-- Co-Chair: David Harrington
-- Enterasys Networks
-- postal: 35 Industrial Way
-- P. O. Box 5005
-- Rochester, NH 03866-5005
-- USA
-- EMail: dbh@enterasys.com
-- phone: +1 603 337-2614
--
-- Editor: Randy Presuhn
-- BMC Software, Inc.
-- postal: 2141 North First Street
-- San Jose, CA 95131
-- USA
-- EMail: randy_presuhn@bmc.com
-- phone: +1 408 546-1006"
-- DESCRIPTION
-- "The MIB module for SNMP entities.
--
-- Copyright (C) The Internet Society (2002). This
-- version of this MIB module is part of RFC 3418;
-- see the RFC itself for full legal notices."
-- REVISION "200210160000Z"
-- DESCRIPTION
-- "This revision of this MIB module was published as
-- RFC 3418."
-- REVISION "199511090000Z"
-- DESCRIPTION
-- "This revision of this MIB module was published as
-- RFC 1907."
-- REVISION "199304010000Z"
-- DESCRIPTION
-- "The initial revision of this MIB module was published
-- as RFC 1450."
-- ::= { snmpModules 1 }
system OBJECT IDENTIFIER
::= { mib-2 1 }
sysDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual description of the entity. This value should
include the full name and version identification of
the system's hardware type, software operating-system,
and networking software."
::= { system 1 }
sysObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vendor's authoritative identification of the
network management subsystem contained in the entity.
This value is allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides an easy and
unambiguous means for determining `what kind of box' is
being managed. For example, if vendor `Flintstones,
Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
it could assign the identifier 1.3.6.1.4.1.424242.1.1
to its `Fred Router'."
::= { system 2 }
sysUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
network management portion of the system was last
re-initialized."
::= { system 3 }
sysContact OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The textual identification of the contact person for
this managed node, together with information on how
to contact this person. If no contact information is
known, the value is the zero-length string."
::= { system 4 }
sysName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An administratively-assigned name for this managed
node. By convention, this is the node's fully-qualified
domain name. If the name is unknown, the value is
the zero-length string."
::= { system 5 }
sysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The physical location of this node (e.g., 'telephone
closet, 3rd floor'). If the location is unknown, the
value is the zero-length string."
::= { system 6 }
sysServices OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value which indicates the set of services that this
entity may potentially offer. The value is a sum.
This sum initially takes the value zero. Then, for
each layer, L, in the range 1 through 7, that this node
performs transactions for, 2 raised to (L - 1) is added
to the sum. For example, a node which performs only
routing functions would have a value of 4 (2^(3-1)).
In contrast, a node which is a host offering application
services would have a value of 72 (2^(4-1) + 2^(7-1)).
Note that in the context of the Internet suite of
protocols, values should be calculated accordingly:
layer functionality
1 physical (e.g., repeaters)
2 datalink/subnetwork (e.g., bridges)
3 internet (e.g., supports the IP)
4 end-to-end (e.g., supports the TCP)
7 applications (e.g., supports the SMTP)
For systems including OSI protocols, layers 5 and 6
may also be counted."
::= { system 7 }
sysORLastChange OBJECT-TYPE
SYNTAX TimeStamp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the time of the most recent
change in state or value of any instance of sysORID."
::= { system 8 }
sysORTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysOREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the capabilities of
the local SNMP application acting as a command
responder with respect to various MIB modules.
SNMP entities having dynamically-configurable support
of MIB modules will have a dynamically-varying number
of conceptual rows."
::= { system 9 }
sysOREntry OBJECT-TYPE
SYNTAX SysOREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the sysORTable."
INDEX { sysORIndex }
::= { sysORTable 1 }
SysOREntry ::= SEQUENCE {
sysORIndex INTEGER,
sysORID OBJECT IDENTIFIER,
sysORDescr DisplayString,
sysORUpTime TimeStamp
}
sysORIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The auxiliary variable used for identifying instances
of the columnar objects in the sysORTable."
::= { sysOREntry 1 }
sysORID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An authoritative identification of a capabilities
statement with respect to various MIB modules supported
by the local SNMP application acting as a command
responder."
::= { sysOREntry 2 }
sysORDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual description of the capabilities identified
by the corresponding instance of sysORID."
::= { sysOREntry 3 }
sysORUpTime OBJECT-TYPE
SYNTAX TimeStamp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the time this conceptual
row was last instantiated."
::= { sysOREntry 4 }
snmp OBJECT IDENTIFIER
::= { mib-2 11 }
snmpInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of messages delivered to the SNMP
entity from the transport service."
::= { snmp 1 }
snmpOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Messages which were
passed from the SNMP protocol entity to the
transport service."
::= { snmp 2 }
snmpInBadVersions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of SNMP messages which were delivered
to the SNMP entity and were for an unsupported SNMP
version."
::= { snmp 3 }
snmpInBadCommunityNames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of community-based SNMP messages (for
example, SNMPv1) delivered to the SNMP entity which
used an SNMP community name not known to said entity.
Also, implementations which authenticate community-based
SNMP messages using check(s) in addition to matching
the community name (for example, by also checking
whether the message originated from a transport address
allowed to use a specified community name) MAY include
in this value the number of messages which failed the
additional check(s). It is strongly RECOMMENDED that
the documentation for any security model which is used
to authenticate community-based SNMP messages specify
the precise conditions that contribute to this value."
::= { snmp 4 }
snmpInBadCommunityUses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of community-based SNMP messages (for
example, SNMPv1) delivered to the SNMP entity which
represented an SNMP operation that was not allowed for
the SNMP community named in the message. The precise
conditions under which this counter is incremented
(if at all) depend on how the SNMP entity implements
its access control mechanism and how its applications
interact with that access control mechanism. It is
strongly RECOMMENDED that the documentation for any
access control mechanism which is used to control access
to and visibility of MIB instrumentation specify the
precise conditions that contribute to this value."
::= { snmp 5 }
snmpInASNParseErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ASN.1 or BER errors encountered by
the SNMP entity when decoding received SNMP messages."
::= { snmp 6 }
snmpInTooBigs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field was
`tooBig'."
::= { snmp 8 }
snmpInNoSuchNames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field was
`noSuchName'."
::= { snmp 9 }
snmpInBadValues OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field was
`badValue'."
::= { snmp 10 }
snmpInReadOnlys OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number valid SNMP PDUs which were delivered
to the SNMP protocol entity and for which the value
of the error-status field was `readOnly'. It should
be noted that it is a protocol error to generate an
SNMP PDU which contains the value `readOnly' in the
error-status field, as such this object is provided
as a means of detecting incorrect implementations of
the SNMP."
::= { snmp 11 }
snmpInGenErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were delivered
to the SNMP protocol entity and for which the value
of the error-status field was `genErr'."
::= { snmp 12 }
snmpInTotalReqVars OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of MIB objects which have been
retrieved successfully by the SNMP protocol entity
as the result of receiving valid SNMP Get-Request
and Get-Next PDUs."
::= { snmp 13 }
snmpInTotalSetVars OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of MIB objects which have been
altered successfully by the SNMP protocol entity as
the result of receiving valid SNMP Set-Request PDUs."
::= { snmp 14 }
snmpInGetRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Get-Request PDUs which
have been accepted and processed by the SNMP
protocol entity."
::= { snmp 15 }
snmpInGetNexts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Get-Next PDUs which have been
accepted and processed by the SNMP protocol entity."
::= { snmp 16 }
snmpInSetRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Set-Request PDUs which
have been accepted and processed by the SNMP protocol
entity."
::= { snmp 17 }
snmpInGetResponses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Get-Response PDUs which
have been accepted and processed by the SNMP protocol
entity."
::= { snmp 18 }
snmpInTraps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Trap PDUs which have been
accepted and processed by the SNMP protocol entity."
::= { snmp 19 }
snmpOutTooBigs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status field was `tooBig.'"
::= { snmp 20 }
snmpOutNoSuchNames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status was `noSuchName'."
::= { snmp 21 }
snmpOutBadValues OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status field was `badValue'."
::= { snmp 22 }
snmpOutGenErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status field was `genErr'."
::= { snmp 24 }
snmpOutGetRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Get-Request PDUs which
have been generated by the SNMP protocol entity."
::= { snmp 25 }
snmpOutGetNexts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Get-Next PDUs which have
been generated by the SNMP protocol entity."
::= { snmp 26 }
snmpOutSetRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Set-Request PDUs which
have been generated by the SNMP protocol entity."
::= { snmp 27 }
snmpOutGetResponses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Get-Response PDUs which
have been generated by the SNMP protocol entity."
::= { snmp 28 }
snmpOutTraps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of SNMP Trap PDUs which have
been generated by the SNMP protocol entity."
::= { snmp 29 }
snmpEnableAuthenTraps OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP entity is permitted to
generate authenticationFailure traps. The value of this
object overrides any configuration information; as such,
it provides a means whereby all authenticationFailure
traps may be disabled.
Note that it is strongly recommended that this object
be stored in non-volatile memory so that it remains
constant across re-initializations of the network
management system."
::= { snmp 30 }
snmpSilentDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Confirmed Class PDUs (such as
GetRequest-PDUs, GetNextRequest-PDUs,
GetBulkRequest-PDUs, SetRequest-PDUs, and
InformRequest-PDUs) delivered to the SNMP entity which
were silently dropped because the size of a reply
containing an alternate Response Class PDU (such as a
Response-PDU) with an empty variable-bindings field
was greater than either a local constraint or the
maximum message size associated with the originator of
the request."
::= { snmp 31 }
snmpProxyDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Confirmed Class PDUs
(such as GetRequest-PDUs, GetNextRequest-PDUs,
GetBulkRequest-PDUs, SetRequest-PDUs, and
InformRequest-PDUs) delivered to the SNMP entity which
were silently dropped because the transmission of
the (possibly translated) message to a proxy target
failed in a manner (other than a time-out) such that
no Response Class PDU (such as a Response-PDU) could
be returned."
::= { snmp 32 }
snmpMIBObjects OBJECT IDENTIFIER
::= { snmpMIB 1 }
snmpTrap OBJECT IDENTIFIER
::= { snmpMIBObjects 4 }
snmpTrapOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The authoritative identification of the notification
currently being sent. This variable occurs as
the second varbind in every SNMPv2-Trap-PDU and
InformRequest-PDU."
::= { snmpTrap 1 }
snmpTrapEnterprise OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The authoritative identification of the enterprise
associated with the trap currently being sent. When an
SNMP proxy agent is mapping an RFC1157 Trap-PDU
into a SNMPv2-Trap-PDU, this variable occurs as the
last varbind."
::= { snmpTrap 3 }
snmpTraps OBJECT IDENTIFIER
::= { snmpMIBObjects 5 }
snmpSet OBJECT IDENTIFIER
::= { snmpMIBObjects 6 }
snmpSetSerialNo OBJECT-TYPE
SYNTAX TestAndIncr
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An advisory lock used to allow several cooperating
command generator applications to coordinate their
use of the SNMP set operation.
This object is used for coarse-grain coordination.
To achieve fine-grain coordination, one or more similar
objects might be defined within each MIB group, as
appropriate."
::= { snmpSet 1 }
snmpMIBConformance OBJECT IDENTIFIER
::= { snmpMIB 2 }
snmpMIBCompliances OBJECT IDENTIFIER
::= { snmpMIBConformance 1 }
snmpMIBGroups OBJECT IDENTIFIER
::= { snmpMIBConformance 2 }
coldStart TRAP-TYPE
ENTERPRISE snmpTraps
-- STATUS mandatory
DESCRIPTION
"A coldStart trap signifies that the SNMP entity,
supporting a notification originator application, is
reinitializing itself and that its configuration may
have been altered."
::= 1
warmStart TRAP-TYPE
ENTERPRISE snmpTraps
-- STATUS mandatory
DESCRIPTION
"A warmStart trap signifies that the SNMP entity,
supporting a notification originator application,
is reinitializing itself such that its configuration
is unaltered."
::= 2
authenticationFailure TRAP-TYPE
ENTERPRISE snmpTraps
-- STATUS mandatory
DESCRIPTION
"An authenticationFailure trap signifies that the SNMP
entity has received a protocol message that is not
properly authenticated. While all implementations
of SNMP entities MAY be capable of generating this
trap, the snmpEnableAuthenTraps object indicates
whether this trap will be generated."
::= 5
snmpSetGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 5 }
-- snmpSetGroup OBJECT-GROUP
-- OBJECTS { snmpSetSerialNo }
-- STATUS mandatory
-- DESCRIPTION
-- "A collection of objects which allow several cooperating
-- command generator applications to coordinate their
-- use of the set operation."
-- ::= { snmpMIBGroups 5 }
systemGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 6 }
-- systemGroup OBJECT-GROUP
-- OBJECTS { sysDescr, sysObjectID, sysUpTime, sysContact,
-- sysName, sysLocation, sysServices, sysORLastChange,
-- sysORID, sysORUpTime, sysORDescr }
-- STATUS mandatory
-- DESCRIPTION
-- "The system group defines objects which are common to all
-- managed systems."
-- ::= { snmpMIBGroups 6 }
snmpBasicNotificationsGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 7 }
-- snmpBasicNotificationsGroup NOTIFICATION-GROUP
-- NOTIFICATIONS { coldStart, authenticationFailure }
-- STATUS mandatory
-- DESCRIPTION
-- "The basic notifications implemented by an SNMP entity
-- supporting command responder applications."
-- ::= { snmpMIBGroups 7 }
snmpGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 8 }
-- snmpGroup OBJECT-GROUP
-- OBJECTS { snmpInPkts, snmpInBadVersions, snmpInASNParseErrs,
-- snmpSilentDrops, snmpProxyDrops,
-- snmpEnableAuthenTraps }
-- STATUS mandatory
-- DESCRIPTION
-- "A collection of objects providing basic instrumentation
-- and control of an SNMP entity."
-- ::= { snmpMIBGroups 8 }
snmpCommunityGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 9 }
-- snmpCommunityGroup OBJECT-GROUP
-- OBJECTS { snmpInBadCommunityNames, snmpInBadCommunityUses }
-- STATUS mandatory
-- DESCRIPTION
-- "A collection of objects providing basic instrumentation
-- of a SNMP entity which supports community-based
-- authentication."
-- ::= { snmpMIBGroups 9 }
snmpObsoleteGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 10 }
-- snmpObsoleteGroup OBJECT-GROUP
-- OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
-- snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
-- snmpInTotalReqVars, snmpInTotalSetVars,
-- snmpInGetRequests, snmpInGetNexts,
-- snmpInSetRequests, snmpInGetResponses, snmpInTraps,
-- snmpOutTooBigs, snmpOutNoSuchNames,
-- snmpOutBadValues, snmpOutGenErrs,
-- snmpOutGetRequests, snmpOutGetNexts,
-- snmpOutSetRequests, snmpOutGetResponses,
-- snmpOutTraps }
-- STATUS obsolete
-- DESCRIPTION
-- "A collection of objects from RFC 1213 made obsolete
-- by this MIB module."
-- ::= { snmpMIBGroups 10 }
snmpWarmStartNotificationGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 11 }
-- snmpWarmStartNotificationGroup NOTIFICATION-GROUP
-- NOTIFICATIONS { warmStart }
-- STATUS mandatory
-- DESCRIPTION
-- "An additional notification for an SNMP entity supporting
-- command responder applications, if it is able to reinitialize
-- itself such that its configuration is unaltered."
-- ::= { snmpMIBGroups 11 }
snmpNotificationGroup OBJECT IDENTIFIER
::= { snmpMIBGroups 12 }
-- snmpNotificationGroup OBJECT-GROUP
-- OBJECTS { snmpTrapOID, snmpTrapEnterprise }
-- STATUS mandatory
-- DESCRIPTION
-- "These objects are required for entities
-- which support notification originator applications."
-- ::= { snmpMIBGroups 12 }
snmpBasicCompliance OBJECT IDENTIFIER
::= { snmpMIBCompliances 2 }
-- snmpBasicCompliance MODULE-COMPLIANCE
-- STATUS deprecated
-- DESCRIPTION
-- "The compliance statement for SNMPv2 entities which
-- implement the SNMPv2 MIB.
--
-- This compliance statement is replaced by
-- snmpBasicComplianceRev2."
-- MODULE -- -- this module
-- MANDATORY-GROUPS { snmpGroup, snmpSetGroup,
-- systemGroup, snmpBasicNotificationsGroup }
-- GROUP snmpCommunityGroup
-- DESCRIPTION
-- "This group is mandatory for SNMPv2 entities which
-- support community-based authentication."
-- ::= { snmpMIBCompliances 2 }
snmpBasicComplianceRev2 OBJECT IDENTIFIER
::= { snmpMIBCompliances 3 }
-- snmpBasicComplianceRev2 MODULE-COMPLIANCE
-- STATUS mandatory
-- DESCRIPTION
-- "The compliance statement for SNMP entities which
-- implement this MIB module."
-- MODULE -- -- this module
-- MANDATORY-GROUPS { snmpGroup, snmpSetGroup,
-- systemGroup, snmpBasicNotificationsGroup }
-- GROUP snmpCommunityGroup
-- DESCRIPTION
-- "This group is mandatory for SNMP entities which
-- support community-based authentication."
-- GROUP snmpWarmStartNotificationGroup
-- DESCRIPTION
-- "This group is mandatory for an SNMP entity which
-- supports command responder applications, and is
-- able to reinitialize itself such that its
-- configuration is unaltered."
-- ::= { snmpMIBCompliances 3 }
END -- end of module SNMPv2-MIB.