| IANA-MAU-MIB DEFINITIONS ::= BEGIN |
| |
| IMPORTS |
| MODULE-IDENTITY, OBJECT-IDENTITY, mib-2 |
| FROM SNMPv2-SMI |
| TEXTUAL-CONVENTION |
| FROM SNMPv2-TC |
| ; |
| |
| ianaMauMIB MODULE-IDENTITY |
| LAST-UPDATED "200704210000Z" -- April 21, 2007 |
| ORGANIZATION "IANA" |
| CONTACT-INFO " Internet Assigned Numbers Authority |
| |
| Postal: ICANN |
| 4676 Admiralty Way, Suite 330 |
| Marina del Rey, CA 90292 |
| |
| Tel: +1-310-823-9358 |
| EMail: iana&iana.org" |
| |
| DESCRIPTION |
| "This MIB module defines dot3MauType OBJECT-IDENTITIES and |
| IANAifMauListBits, IANAifMauMediaAvailable, |
| IANAifMauAutoNegCapBits, and IANAifJackType |
| |
| TEXTUAL-CONVENTIONs, specifying enumerated values of the |
| ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable, |
| ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits / |
| ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects |
| respectively, defined in the MAU-MIB. |
| |
| It is intended that each new MAU type, Media Availability |
| state, Auto Negotiation capability and/or Jack type defined by |
| the IEEE 802.3 working group and approved for publication in a |
| revision of IEEE Std 802.3 will be added to this MIB module, |
| provided that it is suitable for being managed by the base |
| objects in the MAU-MIB. An Expert Review, as defined in |
| RFC 2434 [RFC2434], is REQUIRED for such additions. |
| |
| The following reference is used throughout this MIB module: |
| |
| [IEEE802.3] refers to: |
| IEEE Std 802.3, 2005 Edition: 'IEEE Standard for |
| Information technology - Telecommunications and information |
| exchange between systems - Local and metropolitan area |
| networks - Specific requirements - |
| Part 3: Carrier sense multiple access with collision |
| detection (CSMA/CD) access method and physical layer |
| specifications'. |
| |
| This reference should be updated as appropriate when new |
| MAU types, Media Availability states, Auto Negotiation |
| capabilities, and/or Jack types are added to this MIB module. |
| |
| Copyright (C) The IETF Trust (2007). |
| The initial version of this MIB module was published in |
| RFC 4836; for full legal notices see the RFC itself. |
| Supplementary information may be available at: |
| http://www.ietf.org/copyrights/ianamib.html" |
| |
| REVISION "200704210000Z" -- April 21, 2007 |
| DESCRIPTION "Initial version of this MIB as published in |
| RFC 4836." |
| ::= { mib-2 154 } |
| |
| -- Textual Conventions |
| |
| IANAifMauTypeListBits ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "This data type is used as the syntax of the ifMauTypeListBits |
| object in the (updated) definition of MAU-MIB's ifMauTable. |
| |
| The most recent version of this textual convention is available |
| in the online version of this MIB module on the IANA web site. |
| |
| Requests for new values should be made to IANA via email |
| (iana&iana.org). |
| |
| Note that changes in this textual convention SHALL be |
| synchronized with relevant changes in the dot3MauType |
| OBJECT-IDENTITIES." |
| REFERENCE |
| "[IEEE802.3], Section 30.5.1.1.2" |
| SYNTAX BITS { |
| bOther(0), -- other or unknown |
| bAUI(1), -- AUI |
| b10base5(2), -- 10BASE-5 |
| bFoirl(3), -- FOIRL |
| |
| b10base2(4), -- 10BASE-2 |
| b10baseT(5), -- 10BASE-T duplex mode unknown |
| b10baseFP(6), -- 10BASE-FP |
| b10baseFB(7), -- 10BASE-FB |
| b10baseFL(8), -- 10BASE-FL duplex mode unknown |
| b10broad36(9), -- 10BROAD36 |
| b10baseTHD(10), -- 10BASE-T half duplex mode |
| b10baseTFD(11), -- 10BASE-T full duplex mode |
| b10baseFLHD(12), -- 10BASE-FL half duplex mode |
| b10baseFLFD(13), -- 10BASE-FL full duplex mode |
| b100baseT4(14), -- 100BASE-T4 |
| b100baseTXHD(15), -- 100BASE-TX half duplex mode |
| b100baseTXFD(16), -- 100BASE-TX full duplex mode |
| b100baseFXHD(17), -- 100BASE-FX half duplex mode |
| b100baseFXFD(18), -- 100BASE-FX full duplex mode |
| b100baseT2HD(19), -- 100BASE-T2 half duplex mode |
| b100baseT2FD(20), -- 100BASE-T2 full duplex mode |
| |
| b1000baseXHD(21), -- 1000BASE-X half duplex mode |
| b1000baseXFD(22), -- 1000BASE-X full duplex mode |
| b1000baseLXHD(23), -- 1000BASE-LX half duplex mode |
| b1000baseLXFD(24), -- 1000BASE-LX full duplex mode |
| b1000baseSXHD(25), -- 1000BASE-SX half duplex mode |
| b1000baseSXFD(26), -- 1000BASE-SX full duplex mode |
| b1000baseCXHD(27), -- 1000BASE-CX half duplex mode |
| b1000baseCXFD(28), -- 1000BASE-CX full duplex mode |
| b1000baseTHD(29), -- 1000BASE-T half duplex mode |
| b1000baseTFD(30), -- 1000BASE-T full duplex mode |
| |
| b10GbaseX(31), -- 10GBASE-X |
| b10GbaseLX4(32), -- 10GBASE-LX4 |
| |
| b10GbaseR(33), -- 10GBASE-R |
| b10GbaseER(34), -- 10GBASE-ER |
| b10GbaseLR(35), -- 10GBASE-LR |
| b10GbaseSR(36), -- 10GBASE-SR |
| b10GbaseW(37), -- 10GBASE-W |
| b10GbaseEW(38), -- 10GBASE-EW |
| b10GbaseLW(39), -- 10GBASE-LW |
| b10GbaseSW(40), -- 10GBASE-SW |
| -- new since RFC 3636 |
| b10GbaseCX4(41), -- 10GBASE-CX4 |
| b2BaseTL(42), -- 2BASE-TL |
| b10PassTS(43), -- 10PASS-TS |
| b100BaseBX10D(44), -- 100BASE-BX10D |
| b100BaseBX10U(45), -- 100BASE-BX10U |
| b100BaseLX10(46), -- 100BASE-LX10 |
| b1000BaseBX10D(47), -- 1000BASE-BX10D |
| b1000BaseBX10U(48), -- 1000BASE-BX10U |
| b1000BaseLX10(49), -- 1000BASE-LX10 |
| b1000BasePX10D(50), -- 1000BASE-PX10D |
| b1000BasePX10U(51), -- 1000BASE-PX10U |
| b1000BasePX20D(52), -- 1000BASE-PX20D |
| b1000BasePX20U(53) -- 1000BASE-PX20U |
| } |
| |
| IANAifMauMediaAvailable ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "This data type is used as the syntax of the |
| ifMauMediaAvailable and rpMauMediaAvailable objects in the |
| (updated) definition of MAU-MIB's ifMauTable and rpMauTable |
| respectively. |
| |
| Possible values are: |
| other(1) - undefined (not listed below) |
| unknown(2) - MAU's true state is unknown; e.g., |
| during initialization |
| available(3) - link, light, or loopback is normal |
| notAvailable(4) - link loss, low light, or no loopback |
| remoteFault(5) - a fault has been detected at the |
| remote end of the link. This value |
| applies to 10BASE-FB, 100BASE-T4 Far |
| End Fault Indication and non-specified |
| remote faults from a system running |
| auto-negotiation |
| invalidSignal(6) - invalid signal has been received from |
| the other end of the link, 10BASE-FB |
| only |
| remoteJabber(7) - remote fault, due to jabber |
| |
| remoteLinkLoss(8) - remote fault, due to link loss |
| remoteTest(9) - remote fault, due to test |
| offline(10) - offline, Clause 37 Auto-Negotiation |
| only |
| autoNegError(11) - Auto-Negotiation Error, Clause 37 |
| Auto-Negotiation only |
| pmdLinkFault(12) - PMA/PMD receive link fault. In case |
| of PAF (2BASE-TL / 10PASS-TS PHYs), |
| all PMEs in the aggregation group have |
| detected a link fault |
| wisFrameLoss(13) - WIS loss of frame, 10GBASE-W only |
| wisSignalLoss(14) - WIS loss of signal, 10GBASE-W only |
| pcsLinkFault(15) - PCS receive link fault |
| excessiveBER(16) - PCS Bit Error Ratio monitor |
| reporting excessive error ratio |
| dxsLinkFault(17) - DTE XGXS receive link fault, XAUI only |
| pxsLinkFault(18) - PHY XGXS receive link fault, XAUI only |
| availableReduced(19) - link normal, reduced bandwidth, |
| 2BASE-TL / 10PASS-TS only |
| ready(20) - at least one PME in the aggregation |
| group is detecting handshake tones, |
| 2BASE-TL / 10PASS-TS only |
| |
| If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T, |
| 10BASE-F), then this is equivalent to the link test fail |
| state/low light function. For an AUI, 10BASE2, 10BASE5, or |
| 10BROAD36 MAU, this indicates whether loopback is detected on |
| the DI circuit. The value of this attribute persists between |
| packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and |
| 10BASEFP. |
| |
| At power-up or following a reset, the Media Available state |
| will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and |
| 10BASE-FP MAUs. For these MAUs loopback will be tested on each |
| transmission during which no collision is detected. |
| If DI is receiving input when DO returns to IDL after a |
| transmission and there has been no collision during the |
| transmission, then loopback will be detected. The Media |
| Available state will only change during noncollided |
| transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and |
| 10BASE-FP MAUs. |
| |
| For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX, |
| 100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the |
| states within the link integrity state diagram. |
| Any MAU that implements management of [IEEE802.3] Clause |
| 28 Auto-Negotiation, will map remote fault indication to |
| remoteFault(5). |
| |
| Any MAU that implements management of Clause 37 |
| Auto-Negotiation, will map the received RF1 and RF2 bits as |
| follows: Offline maps to offline(10), Link_Failure maps to |
| remoteFault(5), and Auto-Negotiation Error maps to |
| autoNegError(11). |
| |
| The value remoteFault(5) applies to 10BASE-FB remote |
| fault indication, the 100BASE-X far-end fault indication, and |
| nonspecified remote faults from a system running Clause 28 |
| Auto-Negotiation. |
| |
| The value remoteJabber(7), remoteLink loss(8), or remoteTest(9) |
| SHOULD be used instead of remoteFault(5) where the reason for |
| remote fault is identified in the remote signaling protocol. |
| Where a Clause 22 MII or Clause 35 GMII is present, a logic |
| one in the remote fault bit maps to the value remoteFault(5), |
| a logic zero in the link status bit maps to the enumeration |
| notAvailable(4). The value notAvailable(4) takes precedence |
| over remoteFault(5). |
| |
| For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to |
| the condition where the PHY (PCS with connected PMEs) is |
| initializing, the value ready(20) maps to the condition where |
| the interface is down and at least one PME in the aggregation |
| group is ready for handshake, the value available(3) maps to |
| the condition where all the PMEs in the aggregation group are |
| up, the value notAvailable(4) maps to the condition where all |
| the PMEs in the aggregation group are down and no handshake |
| tones are detected, the value availableReduced(19) maps to the |
| condition where the interface is up, a link fault is detected |
| at the receive direction by one or more PMEs in the |
| aggregation group, but at least one PME is up and the |
| enumeration pmdLinkFault(12) maps to the condition where a link |
| fault is detected at the receive direction by all of the PMEs |
| in the aggregation group. |
| |
| For 10 Gb/s the enumerations map to value of the link_fault |
| variable within the Link Fault Signaling state diagram |
| as follows: the value OK maps to the value available(3), |
| the value Local Fault maps to the value notAvailable(4), |
| and the value Remote Fault maps to the value remoteFault(5). |
| The value pmdLinkFault(12), wisFrameLoss(13), |
| wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or |
| dxsLinkFault(17) SHOULD be used instead of the value |
| notAvailable(4), where the reason for the Local Fault state can |
| be identified through the use of the Clause 45 MDIO Interface. |
| Where multiple reasons for the Local Fault state can be |
| identified, only the highest precedence error SHOULD be |
| |
| reported. This precedence in descending order is as follows: |
| |
| pxsLinkFault |
| pmdLinkFault |
| wisFrameLoss |
| wisSignalLoss |
| pcsLinkFault |
| excessiveBER |
| dxsLinkFault. |
| |
| Where a Clause 45 MDIO interface is present a logic zero in |
| the PMA/PMD Receive link status bit ([IEEE802.3] |
| Section 45.2.1.2.2) maps to the value pmdLinkFault(12), |
| logic one in the LOF status bit (Section 45.2.2.10.4) maps |
| to the value wisFrameLoss(13), a logic one in the LOS |
| status bit (Section 45.2.2.10.5) maps to the value |
| wisSignalLoss, a logic zero in the PCS Receive |
| link status bit (Section 45.2.3.2.2) maps to the value |
| pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched |
| high BER status bit (Section 45.2.3.12.2) maps to the value |
| excessiveBER, a logic zero in the DTE XS receive link status |
| bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17) |
| and a logic zero in the PHY XS transmit link status bit |
| (Section 45.2.4.2.2) maps to the value pxsLinkFault(18). |
| |
| The most recent version of this textual convention is available |
| in the online version of this MIB module on the IANA web site. |
| |
| Requests for new values should be made to IANA via email |
| (iana&iana.org)." |
| REFERENCE |
| "[IEEE802.3], Section 30.5.1.1.4" |
| SYNTAX INTEGER { |
| other(1), |
| unknown(2), |
| available(3), |
| notAvailable(4), |
| remoteFault(5), |
| invalidSignal(6), |
| remoteJabber(7), |
| remoteLinkLoss(8), |
| remoteTest(9), |
| offline(10), |
| autoNegError(11), |
| pmdLinkFault(12), |
| wisFrameLoss(13), |
| wisSignalLoss(14), |
| pcsLinkFault(15), |
| |
| excessiveBER(16), |
| dxsLinkFault(17), |
| pxsLinkFault(18), |
| availableReduced(19), |
| ready(20) |
| } |
| |
| IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION |
| STATUS current |
| DESCRIPTION |
| "This data type is used as the syntax of the |
| ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and |
| ifMauAutoNegCapReceivedBits objects in the (updated) definition |
| of MAU-MIB's ifMauAutoNegTable. |
| |
| The most recent version of this textual convention is available |
| in the online version of this MIB module on the IANA web site. |
| |
| Requests for new values should be made to IANA via email |
| (iana&iana.org)." |
| REFERENCE |
| "[IEEE802.3], Section 30.6.1.1.5" |
| SYNTAX BITS { |
| bOther(0), -- other or unknown |
| b10baseT(1), -- 10BASE-T half duplex mode |
| b10baseTFD(2), -- 10BASE-T full duplex mode |
| b100baseT4(3), -- 100BASE-T4 |
| b100baseTX(4), -- 100BASE-TX half duplex mode |
| b100baseTXFD(5), -- 100BASE-TX full duplex mode |
| b100baseT2(6), -- 100BASE-T2 half duplex mode |
| b100baseT2FD(7), -- 100BASE-T2 full duplex mode |
| bFdxPause(8), -- PAUSE for full-duplex links |
| bFdxAPause(9), -- Asymmetric PAUSE for full-duplex |
| -- links |
| bFdxSPause(10), -- Symmetric PAUSE for full-duplex |
| -- links |
| bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for |
| -- full-duplex links |
| b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half |
| -- duplex mode |
| b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full |
| -- duplex mode |
| b1000baseT(14), -- 1000BASE-T half duplex mode |
| b1000baseTFD(15) -- 1000BASE-T full duplex mode |
| } |
| |
| IANAifJackType ::= TEXTUAL-CONVENTION |
| STATUS current |
| |
| DESCRIPTION |
| "Common enumeration values for repeater and interface MAU |
| jack types. This data type is used as the syntax of the |
| ifJackType and rpJackType objects in the (updated) definition |
| of MAU-MIB's ifJackTable and rpJackTable respectively. |
| |
| Possible values are: |
| other(1) - undefined or unknown |
| rj45(2) - RJ45 |
| rj45S(3) - RJ45 shielded |
| db9(4) - DB9 |
| bnc(5) - BNC |
| fAUI(6) - AUI female |
| mAUI(7) - AUI male |
| fiberSC(8) - SC fiber |
| fiberMIC(9) - MIC fiber |
| fiberST(10) - ST fiber |
| telco(11) - Telco |
| mtrj(12) - MT-RJ fiber |
| hssdc(13) - fiber channel style-2 |
| fiberLC(14) - LC fiber |
| cx4(15) - IB4X for 10GBASE-CX4 |
| |
| The most recent version of this textual convention is available |
| in the online version of this MIB module on the IANA web site. |
| |
| Requests for new values should be made to IANA via email |
| (iana&iana.org)." |
| SYNTAX INTEGER { |
| other(1), |
| rj45(2), |
| rj45S(3), |
| db9(4), |
| bnc(5), |
| fAUI(6), |
| mAUI(7), |
| fiberSC(8), |
| fiberMIC(9), |
| fiberST(10), |
| telco(11), |
| mtrj(12), |
| hssdc(13), |
| fiberLC(14), |
| -- new since RFC 3636 |
| cx4(15) |
| } |
| |
| -- OBJECT IDENTITIES for MAU types |
| |
| -- (see rpMauType and ifMauType of MAU-MIB for usage) |
| -- The following definitions has been moved from RFC 3636 and |
| -- no longer appear in its revision. |
| |
| dot3MauType OBJECT IDENTIFIER ::= { mib-2 snmpDot3MauMgt(26) 4 } |
| |
| dot3MauTypeAUI OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "no internal MAU, view from AUI" |
| REFERENCE "[IEEE802.3], Section 7" |
| ::= { dot3MauType 1 } |
| |
| dot3MauType10Base5 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "thick coax MAU" |
| REFERENCE "[IEEE802.3], Section 7" |
| ::= { dot3MauType 2 } |
| |
| dot3MauTypeFoirl OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "FOIRL MAU" |
| REFERENCE "[IEEE802.3], Section 9.9" |
| ::= { dot3MauType 3 } |
| |
| dot3MauType10Base2 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "thin coax MAU" |
| REFERENCE "[IEEE802.3], Section 10" |
| ::= { dot3MauType 4 } |
| |
| dot3MauType10BaseT OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "UTP MAU. |
| Note that it is strongly recommended that |
| agents return either dot3MauType10BaseTHD or |
| dot3MauType10BaseTFD if the duplex mode is |
| known. However, management applications should |
| be prepared to receive this MAU type value from |
| older agent implementations." |
| REFERENCE "[IEEE802.3], Section 14" |
| ::= { dot3MauType 5 } |
| |
| dot3MauType10BaseFP OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "passive fiber MAU" |
| REFERENCE "[IEEE802.3], Section 16" |
| ::= { dot3MauType 6 } |
| |
| dot3MauType10BaseFB OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "sync fiber MAU" |
| REFERENCE "[IEEE802.3], Section 17" |
| ::= { dot3MauType 7 } |
| |
| dot3MauType10BaseFL OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "async fiber MAU. |
| Note that it is strongly recommended that |
| agents return either dot3MauType10BaseFLHD or |
| dot3MauType10BaseFLFD if the duplex mode is |
| known. However, management applications should |
| be prepared to receive this MAU type value from |
| older agent implementations." |
| REFERENCE "[IEEE802.3], Section 18" |
| ::= { dot3MauType 8 } |
| |
| dot3MauType10Broad36 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "broadband DTE MAU. |
| Note that 10BROAD36 MAUs can be attached to |
| interfaces but not to repeaters." |
| REFERENCE "[IEEE802.3], Section 11" |
| ::= { dot3MauType 9 } |
| |
| ------ new since RFC 1515: |
| dot3MauType10BaseTHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "UTP MAU, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 14" |
| ::= { dot3MauType 10 } |
| |
| dot3MauType10BaseTFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "UTP MAU, full duplex mode" |
| REFERENCE "[IEEE802.3], Section 14" |
| ::= { dot3MauType 11 } |
| |
| dot3MauType10BaseFLHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "async fiber MAU, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 18" |
| ::= { dot3MauType 12 } |
| |
| dot3MauType10BaseFLFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "async fiber MAU, full duplex mode" |
| |
| REFERENCE "[IEEE802.3], Section 18" |
| ::= { dot3MauType 13 } |
| |
| dot3MauType100BaseT4 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "4 pair category 3 UTP" |
| REFERENCE "[IEEE802.3], Section 23" |
| ::= { dot3MauType 14 } |
| |
| dot3MauType100BaseTXHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "2 pair category 5 UTP, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 25" |
| ::= { dot3MauType 15 } |
| |
| dot3MauType100BaseTXFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "2 pair category 5 UTP, full duplex mode" |
| REFERENCE "[IEEE802.3], Section 25" |
| ::= { dot3MauType 16 } |
| |
| dot3MauType100BaseFXHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "X fiber over PMT, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 26" |
| ::= { dot3MauType 17 } |
| |
| dot3MauType100BaseFXFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "X fiber over PMT, full duplex mode" |
| REFERENCE "[IEEE802.3], Section 26" |
| ::= { dot3MauType 18 } |
| |
| dot3MauType100BaseT2HD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "2 pair category 3 UTP, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 32" |
| ::= { dot3MauType 19 } |
| |
| dot3MauType100BaseT2FD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "2 pair category 3 UTP, full duplex mode" |
| REFERENCE "[IEEE802.3], Section 32" |
| ::= { dot3MauType 20 } |
| |
| ------ new since RFC 2239: |
| dot3MauType1000BaseXHD OBJECT-IDENTITY |
| STATUS current |
| |
| DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 36" |
| ::= { dot3MauType 21 } |
| |
| dot3MauType1000BaseXFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode" |
| REFERENCE "[IEEE802.3], Section 36" |
| ::= { dot3MauType 22 } |
| |
| dot3MauType1000BaseLXHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Fiber over long-wavelength laser, half duplex |
| mode" |
| REFERENCE "[IEEE802.3], Section 38" |
| ::= { dot3MauType 23 } |
| |
| dot3MauType1000BaseLXFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Fiber over long-wavelength laser, full duplex |
| mode" |
| REFERENCE "[IEEE802.3], Section 38" |
| ::= { dot3MauType 24 } |
| |
| dot3MauType1000BaseSXHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Fiber over short-wavelength laser, half |
| duplex mode" |
| REFERENCE "[IEEE802.3], Section 38" |
| ::= { dot3MauType 25 } |
| |
| dot3MauType1000BaseSXFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Fiber over short-wavelength laser, full |
| duplex mode" |
| REFERENCE "[IEEE802.3], Section 38" |
| ::= { dot3MauType 26 } |
| |
| dot3MauType1000BaseCXHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Copper over 150-Ohm balanced cable, half |
| duplex mode" |
| REFERENCE "[IEEE802.3], Section 39" |
| ::= { dot3MauType 27 } |
| |
| dot3MauType1000BaseCXFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Copper over 150-Ohm balanced cable, full |
| |
| duplex mode" |
| REFERENCE "[IEEE802.3], Section 39" |
| ::= { dot3MauType 28 } |
| |
| dot3MauType1000BaseTHD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Four-pair Category 5 UTP, half duplex mode" |
| REFERENCE "[IEEE802.3], Section 40" |
| ::= { dot3MauType 29 } |
| |
| dot3MauType1000BaseTFD OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Four-pair Category 5 UTP, full duplex mode" |
| REFERENCE "[IEEE802.3], Section 40" |
| ::= { dot3MauType 30 } |
| |
| ------ new since RFC 2668: |
| dot3MauType10GigBaseX OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "X PCS/PMA, unknown PMD." |
| REFERENCE "[IEEE802.3], Section 48" |
| ::= { dot3MauType 31 } |
| |
| dot3MauType10GigBaseLX4 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "X fiber over WWDM optics" |
| REFERENCE "[IEEE802.3], Section 53" |
| ::= { dot3MauType 32 } |
| |
| dot3MauType10GigBaseR OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "R PCS/PMA, unknown PMD." |
| REFERENCE "[IEEE802.3], Section 49" |
| ::= { dot3MauType 33 } |
| |
| dot3MauType10GigBaseER OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "R fiber over 1550 nm optics" |
| REFERENCE "[IEEE802.3], Section 52" |
| ::= { dot3MauType 34 } |
| |
| dot3MauType10GigBaseLR OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "R fiber over 1310 nm optics" |
| REFERENCE "[IEEE802.3], Section 52" |
| ::= { dot3MauType 35 } |
| |
| dot3MauType10GigBaseSR OBJECT-IDENTITY |
| |
| STATUS current |
| DESCRIPTION "R fiber over 850 nm optics" |
| REFERENCE "[IEEE802.3], Section 52" |
| ::= { dot3MauType 36 } |
| |
| dot3MauType10GigBaseW OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "W PCS/PMA, unknown PMD." |
| REFERENCE "[IEEE802.3], Section 49 and 50" |
| ::= { dot3MauType 37 } |
| |
| dot3MauType10GigBaseEW OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "W fiber over 1550 nm optics" |
| REFERENCE "[IEEE802.3], Section 52" |
| ::= { dot3MauType 38 } |
| |
| dot3MauType10GigBaseLW OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "W fiber over 1310 nm optics" |
| REFERENCE "[IEEE802.3], Section 52" |
| ::= { dot3MauType 39 } |
| |
| dot3MauType10GigBaseSW OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "W fiber over 850 nm optics" |
| REFERENCE "[IEEE802.3], Section 52" |
| ::= { dot3MauType 40 } |
| |
| ------ new since RFC 3636: |
| dot3MauType10GigBaseCX4 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "X copper over 8 pair 100-Ohm balanced cable" |
| REFERENCE "[IEEE802.3], Section 54" |
| ::= { dot3MauType 41 } |
| |
| dot3MauType2BaseTL OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Voice grade UTP copper, up to 2700m, optional PAF" |
| REFERENCE "[IEEE802.3], Sections 61 and 63" |
| ::= { dot3MauType 42 } |
| |
| dot3MauType10PassTS OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Voice grade UTP copper, up to 750m, optional PAF" |
| REFERENCE "[IEEE802.3], Sections 61 and 62" |
| ::= { dot3MauType 43 } |
| |
| dot3MauType100BaseBX10D OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km" |
| REFERENCE "[IEEE802.3], Section 58" |
| ::= { dot3MauType 44 } |
| |
| dot3MauType100BaseBX10U OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km" |
| REFERENCE "[IEEE802.3], Section 58" |
| ::= { dot3MauType 45 } |
| |
| dot3MauType100BaseLX10 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Two single-mode fibers, long wavelength, 10km" |
| REFERENCE "[IEEE802.3], Section 58" |
| ::= { dot3MauType 46 } |
| |
| dot3MauType1000BaseBX10D OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km" |
| REFERENCE "[IEEE802.3], Section 59" |
| ::= { dot3MauType 47 } |
| |
| dot3MauType1000BaseBX10U OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km" |
| REFERENCE "[IEEE802.3], Section 59" |
| ::= { dot3MauType 48 } |
| |
| dot3MauType1000BaseLX10 OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "Two sigle-mode fiber, long wavelength, 10km" |
| REFERENCE "[IEEE802.3], Section 59" |
| ::= { dot3MauType 49 } |
| |
| dot3MauType1000BasePX10D OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber EPON OLT, 10km" |
| REFERENCE "[IEEE802.3], Section 60" |
| ::= { dot3MauType 50 } |
| |
| dot3MauType1000BasePX10U OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber EPON ONU, 10km" |
| REFERENCE "[IEEE802.3], Section 60" |
| ::= { dot3MauType 51 } |
| |
| dot3MauType1000BasePX20D OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber EPON OLT, 20km" |
| REFERENCE "[IEEE802.3], Section 60" |
| ::= { dot3MauType 52 } |
| |
| dot3MauType1000BasePX20U OBJECT-IDENTITY |
| STATUS current |
| DESCRIPTION "One single-mode fiber EPON ONU, 20km" |
| REFERENCE "[IEEE802.3], Section 60" |
| ::= { dot3MauType 53 } |
| |
| END |