SIP-COMMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
Gauge32,
TimeTicks,
Unsigned32,
mib-2
FROM SNMPv2-SMI -- RFC 2578
RowStatus,
TimeStamp,
TruthValue
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
SipTCTransportProtocol,
SipTCMethodName,
SipTCEntityRole,
SipTCOptionTagHeaders
FROM SIP-TC-MIB -- RFC 4780
applIndex
FROM NETWORK-SERVICES-MIB -- RFC 2788
InetPortNumber
FROM INET-ADDRESS-MIB; -- RFC 4001
sipCommonMIB MODULE-IDENTITY
LAST-UPDATED "200704200000Z"
ORGANIZATION "IETF Session Initiation Protocol Working Group"
CONTACT-INFO
"SIP WG email: sip@ietf.org
Co-editor Kevin Lingle
Cisco Systems, Inc.
postal: 7025 Kit Creek Road
P.O. Box 14987
Research Triangle Park, NC 27709
USA
email: klingle@cisco.com
phone: +1 919 476 2029
Co-editor Joon Maeng
email: jmaeng@austin.rr.com
Co-editor Jean-Francois Mule
CableLabs
postal: 858 Coal Creek Circle
Louisville, CO 80027
USA
email: jf.mule@cablelabs.com
phone: +1 303 661 9100
Co-editor Dave Walker
email: drwalker@rogers.com"
DESCRIPTION
"Session Initiation Protocol (SIP) Common MIB module. This
module defines objects that may be common to all SIP entities.
SIP is an application-layer signaling protocol for creating,
modifying and terminating multimedia sessions with one or more
participants. These sessions include Internet multimedia
conferences and Internet telephone calls. SIP is defined in
RFC 3261 (June 2002).
This MIB is defined for managing objects that are common to
SIP User Agents (UAs), Proxy, Redirect, and Registrar servers.
Objects specific to each of these entities MAY be managed using
entity specific MIBs defined in other modules.
Copyright (C) The IETF Trust (2007). This version of
this MIB module is part of RFC 4780; see the RFC itself for
full legal notices."
REVISION "200704200000Z"
DESCRIPTION
"Initial version of the IETF SIP-COMMON-MIB module. This
version published as part of RFC 4780."
::= { mib-2 149 }
-- Top-Level Components of this MIB.
sipCommonMIBNotifications OBJECT IDENTIFIER ::= { sipCommonMIB 0 }
sipCommonMIBObjects OBJECT IDENTIFIER ::= { sipCommonMIB 1 }
sipCommonMIBConformance OBJECT IDENTIFIER ::= { sipCommonMIB 2 }
--
-- This MIB contains objects that are common to all SIP entities.
--
-- Common basic configuration
sipCommonCfgBase OBJECT IDENTIFIER ::= { sipCommonMIBObjects 1 }
-- Protocol timer configuration
sipCommonCfgTimer OBJECT IDENTIFIER ::= { sipCommonMIBObjects 2 }
-- SIP message summary statistics
sipCommonSummaryStats OBJECT IDENTIFIER ::= { sipCommonMIBObjects 3 }
-- Per method statistics
sipCommonMethodStats OBJECT IDENTIFIER ::= { sipCommonMIBObjects 4 }
-- Per Status code or status code class statistics
sipCommonStatusCode OBJECT IDENTIFIER ::= { sipCommonMIBObjects 5 }
-- Transaction statistics
sipCommonStatsTrans OBJECT IDENTIFIER ::= { sipCommonMIBObjects 6 }
-- Method retry statistics
sipCommonStatsRetry OBJECT IDENTIFIER ::= { sipCommonMIBObjects 7 }
-- Other statistics
sipCommonOtherStats OBJECT IDENTIFIER ::= { sipCommonMIBObjects 8 }
-- Accessible-for-notify objects
sipCommonNotifObjects OBJECT IDENTIFIER ::= { sipCommonMIBObjects 9 }
--
-- Common Configuration Objects
--
sipCommonCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the common configuration objects applicable
to all SIP entities."
::= { sipCommonCfgBase 1 }
sipCommonCfgEntry OBJECT-TYPE
SYNTAX SipCommonCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of common configuration.
Each row represents objects for a particular SIP entity
instance present in this system. applIndex is used to uniquely
identify these instances of SIP entities and correlate them
through the common framework of the NETWORK-SERVICES-MIB (RFC
2788)."
INDEX { applIndex }
::= { sipCommonCfgTable 1 }
SipCommonCfgEntry ::= SEQUENCE {
sipCommonCfgProtocolVersion SnmpAdminString,
sipCommonCfgServiceOperStatus INTEGER,
sipCommonCfgServiceStartTime TimeTicks,
sipCommonCfgServiceLastChange TimeTicks,
sipCommonCfgOrganization SnmpAdminString,
sipCommonCfgMaxTransactions Unsigned32,
sipCommonCfgServiceNotifEnable BITS,
sipCommonCfgEntityType SipTCEntityRole
}
sipCommonCfgProtocolVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will reflect the version of SIP supported by this
SIP entity. It will follow the same format as SIP version
information contained in the SIP messages generated by this SIP
entity. For example, entities supporting SIP version 2 will
return 'SIP/2.0' as dictated by the standard."
REFERENCE
"RFC 3261, Section 7.1"
::= { sipCommonCfgEntry 1 }
sipCommonCfgServiceOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
up(2),
down(3),
congested(4),
restarting(5),
quiescing(6),
testing(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current operational state of
the SIP application.
unknown : The operational status cannot be determined
for some reason.
up : The application is operating normally and is
processing (receiving and possibly issuing) SIP
requests and responses.
down : The application is currently unable to process
SIP messages.
congested : The application is operational but no additional
inbound transactions can be accommodated at the
moment.
restarting : The application is currently unavailable, but it
is in the process of restarting and will
presumably, soon be able to process SIP messages.
quiescing : The application is currently operational
but has been administratively put into
quiescence mode. Additional inbound
transactions MAY be rejected.
testing : The application is currently in test mode
and MAY not be able to process SIP messages.
The operational status values defined for this object are not
based on any specific information contained in the SIP
standard."
::= { sipCommonCfgEntry 2 }
sipCommonCfgServiceStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the SIP entity was last
started. If started prior to the last re-initialization of the
local network management subsystem, then this object contains a
zero value."
::= { sipCommonCfgEntry 3 }
sipCommonCfgServiceLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the SIP entity entered its
current operational state. If the current state was entered
prior to the last re-initialization of the local network
management subsystem, then this object contains a zero value."
::= { sipCommonCfgEntry 4 }
sipCommonCfgOrganization OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the organization name that the SIP entity
inserts into Organization headers of SIP messages processed by
this system. If the string is empty, no Organization header is
to be generated."
REFERENCE
"RFC 3261, Section 20.25"
::= { sipCommonCfgEntry 5 }
sipCommonCfgMaxTransactions OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of simultaneous
transactions per second that the SIP entity can manage. In
general, the value of this object SHOULD reflect a level of
transaction processing per second that is considered high
enough to impact the system's CPU and/or memory resources to
the point of deteriorating SIP call processing but not high
enough to cause catastrophic system failure."
::= { sipCommonCfgEntry 6 }
sipCommonCfgServiceNotifEnable OBJECT-TYPE
SYNTAX BITS {
sipCommonServiceColdStart(0),
sipCommonServiceWarmStart(1),
sipCommonServiceStatusChanged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which SIP service related notifications
are enabled. Each bit represents a specific notification. If
a bit has a value 1, the associated notification is enabled and
will be generated by the SIP entity at the appropriate time.
Support for these notifications is OPTIONAL: either none or all
notification values are supported. If an implementation does
not support this object, it should return a 'noSuchObject'
exception to an SNMP GET operation. If notifications are
supported, this object's default value SHOULD reflect
sipCommonServiceColdStart and sipCommonServiceWarmStart enabled
and sipCommonServiceStatusChanged disabled.
This object value SHOULD persist across reboots."
DEFVAL { { sipCommonServiceColdStart,
sipCommonServiceWarmStart } }
::= { sipCommonCfgEntry 7 }
sipCommonCfgEntityType OBJECT-TYPE
SYNTAX SipTCEntityRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the list of SIP entities to which this
row is related. It is defined as a bit map. Each bit
represents a type of SIP entity. If a bit has value 1, the
SIP entity represented by this row plays the role of this
entity type. If a bit has value 0, the SIP entity represented
by this row does not act as this entity type. Combinations
of bits can be set when the SIP entity plays multiple SIP
roles."
::= { sipCommonCfgEntry 8 }
--
-- Support for multiple ports
--
sipCommonPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports that each SIP entity in
this system is allowed to use. These ports can be advertised
using the Contact header in a REGISTER request or response."
::= { sipCommonCfgBase 2 }
sipCommonPortEntry OBJECT-TYPE
SYNTAX SipCommonPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specification of a particular port.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex, sipCommonPort }
::= { sipCommonPortTable 1 }
SipCommonPortEntry ::= SEQUENCE {
sipCommonPort InetPortNumber,
sipCommonPortTransportRcv SipTCTransportProtocol
}
sipCommonPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object reflects a particular port that can be used by the
SIP application."
::= { sipCommonPortEntry 1 }
sipCommonPortTransportRcv OBJECT-TYPE
SYNTAX SipTCTransportProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will specify the transport protocol the SIP entity
will use to receive SIP messages.
This object is a bit map. Each bit represents a transport
protocol. If a bit has value 1, then that transport protocol
is currently being used. If a bit has value 0, then that
transport protocol is currently not being used."
::= { sipCommonPortEntry 2 }
--
-- Support for SIP option tags (SIP extensions).
-- SIP extensions MAY be supported or required by SIP entities.
--
sipCommonOptionTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonOptionTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of the SIP option tags (SIP
extensions) that are either required, supported, or
unsupported by the SIP entity. These option tags are
used in the Require, Proxy-Require, Supported, and
Unsupported header fields.
Example: If a user agent client supports, and requires the
server to support, reliability of provisional responses
(RFC 3262), this table contains a row with the option tag string
'100rel' in sipCommonOptionTag and the OCTET STRING value of
'1010 0000' or '0xA0' in sipCommonOptionTagHeaderField.
If a server does not support the required feature (indicated in
a Require header to a UAS, or in a Proxy-Require to a Proxy
Server), the server returns a 420 Bad Extension listing the
feature in an Unsupported header.
Normally, the list of such features supported by an entity is
static (i.e., will not change over time)."
REFERENCE
"RFC 3261, Sections 19.2, 20.32, 20.29, 20.37, and 20.40"
::= { sipCommonCfgBase 3 }
sipCommonOptionTagEntry OBJECT-TYPE
SYNTAX SipCommonOptionTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular SIP option tag (extension) supported or
unsupported by the SIP entity, and which may be supported or
required by a peer.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through the
common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex, sipCommonOptionTagIndex }
::= { sipCommonOptionTagTable 1 }
SipCommonOptionTagEntry ::= SEQUENCE {
sipCommonOptionTagIndex Unsigned32,
sipCommonOptionTag SnmpAdminString,
sipCommonOptionTagHeaderField SipTCOptionTagHeaders
}
sipCommonOptionTagIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a conceptual row in the table."
::= { sipCommonOptionTagEntry 1 }
sipCommonOptionTag OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the SIP option tag. The option tag names
are registered with IANA and available at http://www.iana.org."
REFERENCE "RFC 3261, Section 27.1"
::= { sipCommonOptionTagEntry 2 }
sipCommonOptionTagHeaderField OBJECT-TYPE
SYNTAX SipTCOptionTagHeaders
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the SIP option tag is supported
(Supported header), unsupported (Unsupported header), or
required (Require or Proxy-Require header) by the SIP entity.
A SIP option tag may be both supported and required."
::= { sipCommonOptionTagEntry 3 }
--
-- Supported SIP Methods
--
sipCommonMethodSupportedTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonMethodSupportedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of methods supported by each SIP
entity in this system (see the standard set of SIP methods in
Section 7.1 of RFC 3261). Any additional methods that may be
incorporated into the SIP protocol can be represented by this
table without any requirement to update this MIB module.
The table is informational in nature and conveys capabilities
of the managed system to the SNMP Manager.
From a protocol point of view, the list of methods advertised
by the SIP entity in the Allow header (Section 20.5 of RFC
3261) MUST be consistent with the methods reflected in this
table."
::= { sipCommonCfgBase 4 }
sipCommonMethodSupportedEntry OBJECT-TYPE
SYNTAX SipCommonMethodSupportedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular method supported by the SIP entity.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex, sipCommonMethodSupportedIndex }
::= { sipCommonMethodSupportedTable 1 }
SipCommonMethodSupportedEntry ::= SEQUENCE {
sipCommonMethodSupportedIndex Unsigned32,
sipCommonMethodSupportedName SipTCMethodName
}
sipCommonMethodSupportedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a conceptual row in the table
and reflects an assigned number used to identify a specific
SIP method.
This identifier is suitable for referencing the associated
method throughout this and other MIBs supported by this managed
system."
::= { sipCommonMethodSupportedEntry 1 }
sipCommonMethodSupportedName OBJECT-TYPE
SYNTAX SipTCMethodName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the supported method's name. The method
name MUST be all upper case (e.g., 'INVITE')."
::= { sipCommonMethodSupportedEntry 2 }
--
-- SIP Timer Configuration
--
sipCommonCfgTimerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonCfgTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains timer configuration objects applicable to
SIP user agent and SIP stateful Proxy Server entities."
::= { sipCommonCfgTimer 1 }
sipCommonCfgTimerEntry OBJECT-TYPE
SYNTAX SipCommonCfgTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of timer configuration.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788).
The objects in this table entry SHOULD be non-volatile and
their value SHOULD be kept at reboot."
INDEX { applIndex }
::= { sipCommonCfgTimerTable 1 }
SipCommonCfgTimerEntry ::= SEQUENCE {
sipCommonCfgTimerA Unsigned32,
sipCommonCfgTimerB Unsigned32,
sipCommonCfgTimerC Unsigned32,
sipCommonCfgTimerD Unsigned32,
sipCommonCfgTimerE Unsigned32,
sipCommonCfgTimerF Unsigned32,
sipCommonCfgTimerG Unsigned32,
sipCommonCfgTimerH Unsigned32,
sipCommonCfgTimerI Unsigned32,
sipCommonCfgTimerJ Unsigned32,
sipCommonCfgTimerK Unsigned32,
sipCommonCfgTimerT1 Unsigned32,
sipCommonCfgTimerT2 Unsigned32,
sipCommonCfgTimerT4 Unsigned32
}
sipCommonCfgTimerA OBJECT-TYPE
SYNTAX Unsigned32 (100..1000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the initial value for the retransmit timer
for the INVITE method. The retransmit timer doubles after each
retransmission, ensuring an exponential backoff in network
traffic. This object represents the initial time a SIP entity
will wait to receive a provisional response to an INVITE before
resending the INVITE request."
REFERENCE
"RFC 3261, Section 17.1.1.2"
DEFVAL { 500 }
::= { sipCommonCfgTimerEntry 1 }
sipCommonCfgTimerB OBJECT-TYPE
SYNTAX Unsigned32 (32000..300000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a SIP entity will wait to
receive a final response to an INVITE. The timer is started
upon transmission of the initial INVITE request."
REFERENCE
"RFC 3261, Section 17.1.1.2"
DEFVAL { 32000 }
::= { sipCommonCfgTimerEntry 2 }
sipCommonCfgTimerC OBJECT-TYPE
SYNTAX Unsigned32 (180000..300000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a SIP Proxy Server will
wait to receive a provisional response to an INVITE. The Timer
C MUST be set for each client transaction when an INVITE
request is proxied."
REFERENCE
"RFC 3261, Section 16.6"
DEFVAL { 180000 }
::= { sipCommonCfgTimerEntry 3 }
sipCommonCfgTimerD OBJECT-TYPE
SYNTAX Unsigned32 (0..300000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the amount of time that the server
transaction can remain in the 'Completed' state when unreliable
transports are used. The default value MUST be equal to or
greater than 32000 for UDP transport, and its value MUST be 0
for TCP/SCTP transport."
REFERENCE
"RFC 3261, Section 17.1.1.2"
DEFVAL { 32000 }
::= { sipCommonCfgTimerEntry 4 }
sipCommonCfgTimerE OBJECT-TYPE
SYNTAX Unsigned32 (100..1000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the initial value for the retransmit timer
for a non-INVITE method while in 'Trying' state. The
retransmit timer doubles after each retransmission until it
reaches T2 to ensure an exponential backoff in network traffic.
This object represents the initial time a SIP entity will wait
to receive a provisional response to the request before
resending the non-INVITE request."
REFERENCE
"RFC 3261, Section 17.1.2.2"
DEFVAL { 500 }
::= { sipCommonCfgTimerEntry 5 }
sipCommonCfgTimerF OBJECT-TYPE
SYNTAX Unsigned32 (32000..300000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a SIP entity will wait to
receive a final response to a non-INVITE request. The timer is
started upon transmission of the initial request."
REFERENCE
"RFC 3261, Section 17.1.2.2"
DEFVAL { 32000 }
::= { sipCommonCfgTimerEntry 6 }
sipCommonCfgTimerG OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the initial value for the retransmit timer
for final responses to INVITE requests. If timer G fires, the
response is passed to the transport layer again for
retransmission, and timer G is set to fire in MIN(2*T1, T2)
seconds. From then on, when timer G fires, the response is
passed to the transport again for transmission, and timer G is
reset with a value that doubles, unless that value exceeds T2,
in which case, it is reset with the value of T2. The default
value MUST be T1 for UDP transport, and its value MUST be 0 for
reliable transport like TCP/SCTP."
REFERENCE
"RFC 3261, Section 17.2.1"
DEFVAL { 500 }
::= { sipCommonCfgTimerEntry 7 }
sipCommonCfgTimerH OBJECT-TYPE
SYNTAX Unsigned32 (32000..300000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a server will wait to
receive an ACK before it abandons retransmitting the response.
The timer is started upon entering the 'Completed' state."
REFERENCE
"RFC 3261, Section 17.2.1"
DEFVAL { 32000 }
::= { sipCommonCfgTimerEntry 8 }
sipCommonCfgTimerI OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a SIP entity will wait to
receive additional ACK message retransmissions.
The timer is started upon entering the 'Confirmed' state. The
default value MUST be T4 for UDP transport and its value MUST
be 0 for reliable transport like TCP/SCTP."
REFERENCE
"RFC 3261, Section 17.2.1"
DEFVAL { 5000 }
::= { sipCommonCfgTimerEntry 9 }
sipCommonCfgTimerJ OBJECT-TYPE
SYNTAX Unsigned32 (32000..300000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a SIP server will wait to
receive retransmissions of non-INVITE requests. The timer is
started upon entering the 'Completed' state for non-INVITE
transactions. When timer J fires, the server MUST transition to
the 'Terminated' state."
REFERENCE
"RFC 3261, Section 17.2.2"
DEFVAL { 32000 }
::= { sipCommonCfgTimerEntry 10 }
sipCommonCfgTimerK OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the maximum time a SIP client will wait to
receive retransmissions of responses to non-INVITE requests.
The timer is started upon entering the 'Completed' state for
non-INVITE transactions. When timer K fires, the server MUST
transition to the 'Terminated' state. The default value MUST
be T4 for UDP transport, and its value MUST be 0 for reliable
transport like TCP/SCTP."
REFERENCE
"RFC 3261, Section 17.1.2.2"
DEFVAL { 5000 }
::= { sipCommonCfgTimerEntry 11 }
sipCommonCfgTimerT1 OBJECT-TYPE
SYNTAX Unsigned32 (200..10000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the T1 timer for a SIP entity. T1 is an
estimate of the round-trip time (RTT) between the client and
server transactions."
REFERENCE
"RFC 3261, Section 17"
DEFVAL { 500 }
::= { sipCommonCfgTimerEntry 12 }
sipCommonCfgTimerT2 OBJECT-TYPE
SYNTAX Unsigned32 (200..10000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the T2 timer for a SIP entity. T2 is the
maximum retransmit interval for non-INVITE requests and INVITE
responses. It's used in various parts of the protocol to reset
other Timer* objects to this value."
REFERENCE
"RFC 3261, Section 17"
DEFVAL { 4000 }
::= { sipCommonCfgTimerEntry 13 }
sipCommonCfgTimerT4 OBJECT-TYPE
SYNTAX Unsigned32 (200..10000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the T4 timer for a SIP entity. T4 is the
maximum duration a message will remain in the network. It
represents the amount of time the network will take to clear
messages between client and server transactions. It's used in
various parts of the protocol to reset other Timer* objects to
this value."
REFERENCE
"RFC 3261, Section 17"
DEFVAL { 5000 }
::= { sipCommonCfgTimerEntry 14 }
--
-- Common Statistics Objects
--
--
-- Summary Statistics
--
sipCommonSummaryStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonSummaryStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the summary statistics objects applicable
to all SIP entities. Each row represents those objects for a
particular SIP entity present in this system."
::= { sipCommonSummaryStats 1 }
sipCommonSummaryStatsEntry OBJECT-TYPE
SYNTAX SipCommonSummaryStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of summary statistics.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex }
::= { sipCommonSummaryStatsTable 1 }
SipCommonSummaryStatsEntry ::= SEQUENCE {
sipCommonSummaryInRequests Counter32,
sipCommonSummaryOutRequests Counter32,
sipCommonSummaryInResponses Counter32,
sipCommonSummaryOutResponses Counter32,
sipCommonSummaryTotalTransactions Counter32,
sipCommonSummaryDisconTime TimeStamp
}
sipCommonSummaryInRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of SIP request messages
received by the SIP entity, including retransmissions.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonSummaryDisconTime object in the same
row."
::= { sipCommonSummaryStatsEntry 1 }
sipCommonSummaryOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of SIP request messages
sent out (originated and relayed) by the SIP entity. Where a
particular message is sent more than once, for example as a
retransmission or as a result of forking, each transmission is
counted separately.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonSummaryDisconTime object in the same
row."
::= { sipCommonSummaryStatsEntry 2 }
sipCommonSummaryInResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of SIP response messages
received by the SIP entity, including retransmissions.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonSummaryDisconTime object in the same
row."
::= { sipCommonSummaryStatsEntry 3 }
sipCommonSummaryOutResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of SIP response messages
sent (originated and relayed) by the SIP entity including
retransmissions.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonSummaryDisconTime object in the same
row."
::= { sipCommonSummaryStatsEntry 4 }
sipCommonSummaryTotalTransactions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a count of the number of transactions that
are in progress and transactions that have reached the
'Terminated' state. It is not applicable to stateless SIP Proxy
Servers.
A SIP transaction occurs between a client and a server, and
comprises all messages from the first request sent from the
client to the server, up to a final (non-1xx) response sent
from the server to the client.
If the request is INVITE and the final response is a non-2xx,
the transaction also include an ACK to the response. The ACK
for a 2xx response to an INVITE request is a separate
transaction.
The branch ID parameter in the Via header field values serves
as a transaction identifier.
A transaction is identified by the CSeq sequence number within
a single call leg. The ACK request has the same CSeq number as
the corresponding INVITE request, but comprises a transaction
of its own.
In the case of a forked request, each branch counts as a single
transaction.
For a transaction stateless Proxy Server, this counter is
always 0.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonSummaryDisconTime object in the same
row."
::= { sipCommonSummaryStatsEntry 5 }
sipCommonSummaryDisconTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sysUpTime object when the counters for the
summary statistics objects in this row last experienced a
discontinuity."
::= { sipCommonSummaryStatsEntry 6 }
--
-- SIP Method Statistics
-- Total counts for each SIP method.
--
sipCommonMethodStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonMethodStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the method statistics objects for SIP
entities. Each row represents those objects for a particular
SIP entity present in this system."
::= { sipCommonMethodStats 1 }
sipCommonMethodStatsEntry OBJECT-TYPE
SYNTAX SipCommonMethodStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of per entity method statistics.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex, sipCommonMethodStatsName }
::= { sipCommonMethodStatsTable 1 }
SipCommonMethodStatsEntry ::= SEQUENCE {
sipCommonMethodStatsName SipTCMethodName,
sipCommonMethodStatsOutbounds Counter32,
sipCommonMethodStatsInbounds Counter32,
sipCommonMethodStatsDisconTime TimeStamp
}
sipCommonMethodStatsName OBJECT-TYPE
SYNTAX SipTCMethodName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the SIP method related to the
objects in a particular row."
::= { sipCommonMethodStatsEntry 1 }
sipCommonMethodStatsOutbounds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of requests sent by the
SIP entity, excluding retransmissions. Retransmissions are
counted separately and are not reflected in this counter. A
Management Station can detect discontinuities in this counter
by monitoring the sipCommonMethodStatsDisconTime object in the
same row."
REFERENCE
"RFC 3261, Section 7.1"
::= { sipCommonMethodStatsEntry 2 }
sipCommonMethodStatsInbounds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of requests received by
the SIP entity. Retransmissions are counted separately and are
not reflected in this counter. A Management Station can detect
discontinuities in this counter by monitoring the
sipCommonMethodStatsDisconTime object in the same row."
REFERENCE
"RFC 3261, Section 7.1"
::= { sipCommonMethodStatsEntry 3 }
sipCommonMethodStatsDisconTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sysUpTime object when the counters for the
method statistics objects in this row last experienced a
discontinuity."
::= { sipCommonMethodStatsEntry 4 }
--
-- Support for specific status codes
--
sipCommonStatusCodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonStatusCodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of SIP status codes that each SIP
entity in this system has been requested to monitor. It is the
mechanism by which specific status codes are monitored.
Entries created in this table must not persist across reboots."
::= { sipCommonStatusCode 1 }
sipCommonStatusCodeEntry OBJECT-TYPE
SYNTAX SipCommonStatusCodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row contains information on a particular SIP status code
that the SIP entity has been requested to monitor. Entries
created in this table must not persist across reboots.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex, sipCommonStatusCodeMethod,
sipCommonStatusCodeValue }
::= { sipCommonStatusCodeTable 1 }
SipCommonStatusCodeEntry ::= SEQUENCE {
sipCommonStatusCodeMethod SipTCMethodName,
sipCommonStatusCodeValue Unsigned32,
sipCommonStatusCodeIns Counter32,
sipCommonStatusCodeOuts Counter32,
sipCommonStatusCodeRowStatus RowStatus,
sipCommonStatusCodeDisconTime TimeStamp
}
sipCommonStatusCodeMethod OBJECT-TYPE
SYNTAX SipTCMethodName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a conceptual row in the
table."
::= { sipCommonStatusCodeEntry 1 }
sipCommonStatusCodeValue OBJECT-TYPE
SYNTAX Unsigned32 (100..999)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains a SIP status code value that the SIP
entity has been requested to monitor. All of the other
information in the row is related to this value."
::= { sipCommonStatusCodeEntry 2 }
sipCommonStatusCodeIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of response messages
received by the SIP entity with the status code value contained
in the sipCommonStatusCodeValue column.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service, or when the
monitoring of the status code is temporarily disabled. A
Management Station can detect discontinuities in this counter
by monitoring the sipCommonStatusCodeDisconTime object in the
same row."
::= { sipCommonStatusCodeEntry 3 }
sipCommonStatusCodeOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of response messages sent
by the SIP entity with the status code value contained in the
sipCommonStatusCodeValue column.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service, or when the
monitoring of the Status code is temporarily disabled. A
Management Station can detect discontinuities in this counter
by monitoring the sipCommonStatusCodeDisconTime object in the
same row."
::= { sipCommonStatusCodeEntry 4 }
sipCommonStatusCodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row augmentation in sipCommonStatusCodeNotifTable will be
governed by the value of this RowStatus.
The values 'createAndGo' and 'destroy' are the only valid
values allowed for this object. If a row exists, it will
reflect a status of 'active' when queried."
::= { sipCommonStatusCodeEntry 5 }
sipCommonStatusCodeDisconTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sysUpTime object when the counters for the
status code statistics objects in this row last experienced
a discontinuity."
::= { sipCommonStatusCodeEntry 6 }
--
-- Support for specific status code notifications
--
sipCommonStatusCodeNotifTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonStatusCodeNotifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects to control notifications related to
particular status codes that each SIP entity in this system has
been requested to monitor.
There is an entry in this table corresponding to each entry in
sipCommonStatusCodeTable. Therefore, this table augments
sipCommonStatusCodeTable and utilizes the same index
methodology.
The objects in this table are not included directly in the
sipCommonStatusCodeTable simply to keep the status code
notification control objects separate from the actual status
code statistics."
::= { sipCommonStatusCode 2 }
sipCommonStatusCodeNotifEntry OBJECT-TYPE
SYNTAX SipCommonStatusCodeNotifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This row contains information controlling notifications for a
particular SIP status code that the SIP entity has been
requested to monitor."
AUGMENTS { sipCommonStatusCodeEntry }
::= { sipCommonStatusCodeNotifTable 1 }
SipCommonStatusCodeNotifEntry ::= SEQUENCE {
sipCommonStatusCodeNotifSend TruthValue,
sipCommonStatusCodeNotifEmitMode INTEGER,
sipCommonStatusCodeNotifThresh Unsigned32,
sipCommonStatusCodeNotifInterval Unsigned32
}
sipCommonStatusCodeNotifSend OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether a sipCommonStatusCodeNotif is
emitted when the status code value specified by
sipCommonStatusCodeValue is sent or received. If the value of
this object is 'true', then a notification is sent. If it is
'false', no notification is sent.
Note well that a notification MAY be emitted for every message
sent or received that contains the particular status code.
Depending on the status code involved, this can cause a
significant number of notification emissions that could be
detrimental to network performance. Managers are forewarned to
be prudent in the use of this object to enable notifications.
Look to sipCommonStatusCodeNotifEmitMode for alternative
controls for sipCommonStatusCodeNotif emissions."
DEFVAL { false }
::= { sipCommonStatusCodeNotifEntry 1 }
sipCommonStatusCodeNotifEmitMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
oneShot(2),
triggered(3) -- read-only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object sipCommonStatusCodeNotifSend MUST be set to 'true'
for the values of this object to have any effect. It is
RECOMMENDED that the desired emit mode be established by this
object prior to setting sipCommonStatusCodeNotifSend to 'true'.
This object and the sipCommonStatusCodeNotifSend object can
obviously be set independently, but their respective values
will have a dependency on each other and the resulting
notifications.
This object specifies the mode for emissions of
sipCommonStatusCodeNotif notifications.
normal : sipCommonStatusCodeNotif notifications will be
emitted by the system for each SIP response
message sent or received that contains the
desired status code.
oneShot : Only one sipCommonStatusCodeNotif notification
will be emitted. It will be the next SIP response
message sent or received that contains the
desired status code.
No more notifications are emitted until this
object is set to 'oneShot' again or set to
'normal'. This option is provided as a means of
quelling the potential promiscuous behavior that
can be associated with the
sipCommonStatusCodeNotif.
triggered : This value is only readable and cannot be set. It
reflects that the 'oneShot' case has occurred,
and indicates that the mode needs to be reset to
get further notifications. The mode is reset by
setting this object to 'oneShot' or 'normal'."
DEFVAL { oneShot }
::= { sipCommonStatusCodeNotifEntry 2 }
sipCommonStatusCodeNotifThresh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of response messages sent or
received by this system that are considered excessive. Based
on crossing that threshold, a
sipCommonStatusCodeThreshExceededInNotif notification or a
sipCommonStatusCodeThreshExceededOutNotif will be sent. The
sipCommonStatusCodeThreshExceededInNotif and
sipCommonStatusCodeThreshExceededOutNotif notifications can be
used as an early warning mechanism in lieu of using
sipCommonStatusCodeNotif.
Note that the configuration applied by this object will be
applied equally to inbound and outbound response messages."
DEFVAL { 500 }
::= { sipCommonStatusCodeNotifEntry 3 }
sipCommonStatusCodeNotifInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time interval over which, if
sipCommonStatusCodeThresh is exceeded with respect to sent or
received messages, a sipCommonStatusCodeThreshExceededInNotif
or sipCommonStatusCodeThreshExceededOutNotif notification will
be sent.
Note that the configuration applied by this object will be
applied equally to inbound and outbound response messages."
DEFVAL { 60 }
::= { sipCommonStatusCodeNotifEntry 4 }
--
-- Transaction Statistics
--
sipCommonTransCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonTransCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on the transactions currently
awaiting definitive responses by each SIP entity in this
system.
This table does not apply to transaction stateless Proxy
Servers."
::= { sipCommonStatsTrans 1 }
sipCommonTransCurrentEntry OBJECT-TYPE
SYNTAX SipCommonTransCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a particular SIP entity's current transactions.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex }
::= { sipCommonTransCurrentTable 1 }
SipCommonTransCurrentEntry ::= SEQUENCE {
sipCommonTransCurrentactions Gauge32
}
sipCommonTransCurrentactions OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of transactions awaiting
definitive (non-1xx) response. In the case of a forked
request, each branch counts as a single transaction
corresponding to the entity identified by applIndex."
::= { sipCommonTransCurrentEntry 1 }
--
-- SIP Retry Statistics
--
-- This group contains various statistics objects about
-- retransmission counts.
--
sipCommonStatsRetryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonStatsRetryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains retry statistics objects applicable to each
SIP entity in this system."
::= { sipCommonStatsRetry 1 }
sipCommonStatsRetryEntry OBJECT-TYPE
SYNTAX SipCommonStatsRetryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of retry statistics.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through the
common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex, sipCommonStatsRetryMethod }
::= { sipCommonStatsRetryTable 1 }
SipCommonStatsRetryEntry ::= SEQUENCE {
sipCommonStatsRetryMethod SipTCMethodName,
sipCommonStatsRetries Counter32,
sipCommonStatsRetryFinalResponses Counter32,
sipCommonStatsRetryNonFinalResponses Counter32,
sipCommonStatsRetryDisconTime TimeStamp
}
sipCommonStatsRetryMethod OBJECT-TYPE
SYNTAX SipTCMethodName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the SIP method related to the
objects in a row."
::= { sipCommonStatsRetryEntry 1 }
sipCommonStatsRetries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of request
retransmissions that have been sent by the SIP entity. Note
that there could be multiple retransmissions per request.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonStatsRetryDisconTime object in the same
row."
::= { sipCommonStatsRetryEntry 2 }
sipCommonStatsRetryFinalResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of Final Response retries
that have been sent by the SIP entity. Note that there could
be multiple retransmissions per request.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonStatsRetryDisconTime object in the same
row."
::= { sipCommonStatsRetryEntry 3 }
sipCommonStatsRetryNonFinalResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the total number of non-Final Response
retries that have been sent by the SIP entity.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonStatsRetryDisconTime object in the same
row."
::= { sipCommonStatsRetryEntry 4 }
sipCommonStatsRetryDisconTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sysUpTime object when the counters for the
retry statistics objects in this row last experienced a
discontinuity."
::= { sipCommonStatsRetryEntry 5 }
--
-- Other Common Statistics
--
sipCommonOtherStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SipCommonOtherStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains other common statistics supported by each
SIP entity in this system."
::= { sipCommonOtherStats 1 }
sipCommonOtherStatsEntry OBJECT-TYPE
SYNTAX SipCommonOtherStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a particular SIP entity's other common
statistics.
Each row represents those objects for a particular SIP entity
present in this system. applIndex is used to uniquely identify
these instances of SIP entities and correlate them through
the common framework of the NETWORK-SERVICES-MIB (RFC 2788)."
INDEX { applIndex }
::= { sipCommonOtherStatsTable 1 }
SipCommonOtherStatsEntry ::= SEQUENCE {
sipCommonOtherStatsNumUnsupportedUris Counter32,
sipCommonOtherStatsNumUnsupportedMethods Counter32,
sipCommonOtherStatsOtherwiseDiscardedMsgs Counter32,
sipCommonOtherStatsDisconTime TimeStamp
}
sipCommonOtherStatsNumUnsupportedUris OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RequestURIs received with an unsupported scheme.
A server normally responds to such requests with a 400 Bad
Request status code.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonOtherStatsDisconTime object in the same
row."
::= { sipCommonOtherStatsEntry 1 }
sipCommonOtherStatsNumUnsupportedMethods OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SIP requests received with unsupported methods. A
server normally responds to such requests with a 501 (Not
Implemented) or 405 (Method Not Allowed).
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonOtherStatsDisconTime object in the same
row."
::= { sipCommonOtherStatsEntry 2 }
sipCommonOtherStatsOtherwiseDiscardedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SIP messages received that, for any number of
reasons, was discarded without a response.
Discontinuities in the value of this counter can occur at
re-initialization of the SIP entity or service. A Management
Station can detect discontinuities in this counter by
monitoring the sipCommonOtherStatsDisconTime object in the same
row."
::= { sipCommonOtherStatsEntry 3 }
sipCommonOtherStatsDisconTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sysUpTime object when the counters for the
statistics objects in this row last experienced a
discontinuity."
::= { sipCommonOtherStatsEntry 4 }
--
-- Notification related objects
--
--
-- Status code related notification objects.
--
sipCommonStatusCodeNotifTo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object contains the value of the To header in the message
containing the status code that caused the notification. The
header name will be part of this object value. For example,
'To: Watson '."
::= { sipCommonNotifObjects 1 }
sipCommonStatusCodeNotifFrom OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object contains the value of the From header in the
message containing the status code that caused the
notification. The header name will be part of this object
value. For example, 'From: Watson '."
::= { sipCommonNotifObjects 2 }
sipCommonStatusCodeNotifCallId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object contains the value of the Call-ID in the message
containing the status code that caused the notification. The
header name will be part of this object value. For example,
'Call-ID: 5551212@example.com'."
::= { sipCommonNotifObjects 3 }
sipCommonStatusCodeNotifCSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object contains the CSeq value in the message containing
the status code that caused the notification. The header name
will be part of this object value. For example, 'CSeq: 1722
INVITE'."
::= { sipCommonNotifObjects 4 }
--
-- General notification related objects.
--
sipCommonNotifApplIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object contains the applIndex as described in RFC 2788.
This object is created in order to allow a variable binding
containing a value of applIndex in a notification."
::= { sipCommonNotifObjects 5 }
sipCommonNotifSequenceNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object contains a sequence number for each notification
generated by this SIP entity. Each notification SHOULD have a
unique sequence number. A network manager can use this
information to determine whether notifications from a
particular SIP entity have been missed. The value of this
object MUST start at 1 and increase by 1 with each generated
notification. If a system restarts, the sequence number MAY
start again from 1."
::= { sipCommonNotifObjects 6 }
--
-- Notifications
--
sipCommonStatusCodeNotif NOTIFICATION-TYPE
OBJECTS {
sipCommonNotifSequenceNumber,
sipCommonNotifApplIndex,
sipCommonStatusCodeNotifTo,
sipCommonStatusCodeNotifFrom,
sipCommonStatusCodeNotifCallId,
sipCommonStatusCodeNotifCSeq,
sipCommonStatusCodeIns,
sipCommonStatusCodeOuts
}
STATUS current
DESCRIPTION
"Signifies that a specific status code has been sent or received
by the system."
::= { sipCommonMIBNotifications 1 }
sipCommonStatusCodeThreshExceededInNotif NOTIFICATION-TYPE
OBJECTS {
sipCommonNotifSequenceNumber,
sipCommonNotifApplIndex,
sipCommonStatusCodeIns
}
STATUS current
DESCRIPTION
"Signifies that a specific status code was found to have been
received by the system frequently enough to exceed the
configured threshold. This notification can be used as
an early warning mechanism in lieu of using
sipCommonStatusCodeNotif."
::= { sipCommonMIBNotifications 2 }
sipCommonStatusCodeThreshExceededOutNotif NOTIFICATION-TYPE
OBJECTS {
sipCommonNotifSequenceNumber,
sipCommonNotifApplIndex,
sipCommonStatusCodeOuts
}
STATUS current
DESCRIPTION
"Signifies that a specific status code was found to have been
sent by the system enough to exceed the configured threshold.
This notification can be used as an early warning mechanism in
lieu of using sipCommonStatusCodeNotif."
::= { sipCommonMIBNotifications 3 }
sipCommonServiceColdStart NOTIFICATION-TYPE
OBJECTS {
sipCommonNotifSequenceNumber,
sipCommonNotifApplIndex,
sipCommonCfgServiceStartTime
}
STATUS current
DESCRIPTION
"Signifies that the SIP service has reinitialized itself or
started for the first time. This SHOULD result from a hard
'down' to 'up' administrative status change. The configuration
or behavior of the service MAY be altered."
::= { sipCommonMIBNotifications 4 }
sipCommonServiceWarmStart NOTIFICATION-TYPE
OBJECTS {
sipCommonNotifSequenceNumber,
sipCommonNotifApplIndex,
sipCommonCfgServiceLastChange
}
STATUS current
DESCRIPTION
"Signifies that the SIP service has reinitialized itself and is
restarting after an administrative 'reset'. The configuration
or behavior of the service MAY be altered."
::= { sipCommonMIBNotifications 5 }
sipCommonServiceStatusChanged NOTIFICATION-TYPE
OBJECTS {
sipCommonNotifSequenceNumber,
sipCommonNotifApplIndex,
sipCommonCfgServiceLastChange,
sipCommonCfgServiceOperStatus
}
STATUS current
DESCRIPTION
"Signifies that the SIP service operational status has changed."
::= { sipCommonMIBNotifications 6 }
--
-- Conformance
--
sipCommonMIBCompliances
OBJECT IDENTIFIER ::= { sipCommonMIBConformance 1 }
sipCommonMIBGroups
OBJECT IDENTIFIER ::= { sipCommonMIBConformance 2 }
--
-- Compliance Statements
--
sipCommonCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SIP entities."
MODULE -- this module
MANDATORY-GROUPS { sipCommonConfigGroup,
sipCommonStatsGroup
}
OBJECT sipCommonStatusCodeRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT sipCommonCfgServiceNotifEnable
MIN-ACCESS not-accessible
DESCRIPTION
"This object is optional and does not need to be supported."
GROUP sipCommonInformationalGroup
DESCRIPTION
"This group is OPTIONAL. A SIP entity can elect to not provide
any support for these objects, as they provide optional
information."
GROUP sipCommonConfigTimerGroup
DESCRIPTION
"This group is OPTIONAL. A SIP entity can elect to not provide
any timer configuration."
GROUP sipCommonStatsRetryGroup
DESCRIPTION
"This group is OPTIONAL. A SIP entity can elect to not provide
any retry statistics."
GROUP sipCommonNotifGroup
DESCRIPTION
"This group is OPTIONAL. A SIP entity can elect to not provide
any notifications. If implemented, the
sipCommonStatusCodeNotifGroup and sipCommonNotifObjectsGroup
MUST also be implemented."
GROUP sipCommonStatusCodeNotifGroup
DESCRIPTION
"This group is OPTIONAL. A SIP entity can elect to not provide
any notifications. If implemented, the sipCommonNotifGroup and
sipCommonNotifObjectsGroup MUST also be implemented."
GROUP sipCommonNotifObjectsGroup
DESCRIPTION
"This group is OPTIONAL. A SIP entity can elect to not provide
any notifications. If implemented, the
sipCommonStatusCodeNotifGroup and sipCommonNotifGroup MUST also
be implemented."
::= { sipCommonMIBCompliances 1 }
--
-- Units of Conformance
--
sipCommonConfigGroup OBJECT-GROUP
OBJECTS {
sipCommonCfgProtocolVersion,
sipCommonCfgServiceOperStatus,
sipCommonCfgServiceStartTime,
sipCommonCfgServiceLastChange,
sipCommonPortTransportRcv,
sipCommonOptionTag,
sipCommonOptionTagHeaderField,
sipCommonCfgMaxTransactions,
sipCommonCfgServiceNotifEnable,
sipCommonCfgEntityType,
sipCommonMethodSupportedName
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common to all
SIP entities."
::= { sipCommonMIBGroups 1 }
sipCommonInformationalGroup OBJECT-GROUP
OBJECTS {
sipCommonCfgOrganization
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common to all
SIP entities."
::= { sipCommonMIBGroups 2 }
sipCommonConfigTimerGroup OBJECT-GROUP
OBJECTS {
sipCommonCfgTimerA,
sipCommonCfgTimerB,
sipCommonCfgTimerC,
sipCommonCfgTimerD,
sipCommonCfgTimerE,
sipCommonCfgTimerF,
sipCommonCfgTimerG,
sipCommonCfgTimerH,
sipCommonCfgTimerI,
sipCommonCfgTimerJ,
sipCommonCfgTimerK,
sipCommonCfgTimerT1,
sipCommonCfgTimerT2,
sipCommonCfgTimerT4
}
STATUS current
DESCRIPTION
"A collection of objects providing timer configuration common to
all SIP entities."
::= { sipCommonMIBGroups 3 }
sipCommonStatsGroup OBJECT-GROUP
OBJECTS {
sipCommonSummaryInRequests,
sipCommonSummaryOutRequests,
sipCommonSummaryInResponses,
sipCommonSummaryOutResponses,
sipCommonSummaryTotalTransactions,
sipCommonSummaryDisconTime,
sipCommonMethodStatsOutbounds,
sipCommonMethodStatsInbounds,
sipCommonMethodStatsDisconTime,
sipCommonStatusCodeIns,
sipCommonStatusCodeOuts,
sipCommonStatusCodeRowStatus,
sipCommonStatusCodeDisconTime,
sipCommonTransCurrentactions,
sipCommonOtherStatsNumUnsupportedUris,
sipCommonOtherStatsNumUnsupportedMethods,
sipCommonOtherStatsOtherwiseDiscardedMsgs,
sipCommonOtherStatsDisconTime
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics common to all SIP
entities."
::= { sipCommonMIBGroups 4 }
sipCommonStatsRetryGroup OBJECT-GROUP
OBJECTS {
sipCommonStatsRetries,
sipCommonStatsRetryFinalResponses,
sipCommonStatsRetryNonFinalResponses,
sipCommonStatsRetryDisconTime
}
STATUS current
DESCRIPTION
"A collection of objects providing retry statistics."
::= { sipCommonMIBGroups 5 }
sipCommonNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
sipCommonStatusCodeNotif,
sipCommonStatusCodeThreshExceededInNotif,
sipCommonStatusCodeThreshExceededOutNotif,
sipCommonServiceColdStart,
sipCommonServiceWarmStart,
sipCommonServiceStatusChanged
}
STATUS current
DESCRIPTION
"A collection of notifications common to all SIP entities."
::= { sipCommonMIBGroups 6 }
sipCommonStatusCodeNotifGroup OBJECT-GROUP
OBJECTS {
sipCommonStatusCodeNotifSend,
sipCommonStatusCodeNotifEmitMode,
sipCommonStatusCodeNotifThresh,
sipCommonStatusCodeNotifInterval
}
STATUS current
DESCRIPTION
"A collection of objects related to the control and attribution
of notifications common to all SIP entities."
::= { sipCommonMIBGroups 7 }
sipCommonNotifObjectsGroup OBJECT-GROUP
OBJECTS {
sipCommonStatusCodeNotifTo,
sipCommonStatusCodeNotifFrom,
sipCommonStatusCodeNotifCallId,
sipCommonStatusCodeNotifCSeq,
sipCommonNotifApplIndex,
sipCommonNotifSequenceNumber
}
STATUS current
DESCRIPTION
"A collection of accessible-for-notify objects related to the
notification defined in this MIB module."
::= { sipCommonMIBGroups 8 }
END