/*
This file is provided under a dual BSD/GPLv2 license. When using or
redistributing this file, you may do so under either license.
GPL LICENSE SUMMARY
Copyright(c) 2015 Intel Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of version 2 of the GNU General Public License as
published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
Contact Information:
Intel Corporation, www.intel.com
BSD LICENSE
Copyright(c) 2015 Intel Corporation.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* Copyright (c) 2003-2014 Intel Corporation. All rights reserved. */
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "psm_user.h"
#include "psm2_hal.h"
#include "ips_proto.h"
/*
* These are the default values used in parsing the environment
* variable PSM2_PATH_NO_LMC_RANGE, which can be used to exclude
* a range of message sizes from the LMC LID assignments used to
* implement dispersive routing.
*
* This value is 2^32 - 1.
*/
#define DEF_LIMITS_STRING "4294967295:4294967295"
#define DEF_LIMITS_VALUE 4294967295
static void ips_gen_ipd_table(struct ips_proto *proto)
{
uint8_t delay = 0, step = 1;
/* Based on our current link rate setup the IPD table */
memset(proto->ips_ipd_delay, 0xFF, sizeof(proto->ips_ipd_delay));
/*
* Based on the starting rate of the link, we let the code to
* fall through to next rate without 'break' in the code. The
* decrement is doubled at each rate level...
*/
switch (proto->epinfo.ep_link_rate) {
case IBV_RATE_300_GBPS:
proto->ips_ipd_delay[IBV_RATE_100_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_200_GBPS:
proto->ips_ipd_delay[IBV_RATE_100_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_168_GBPS:
proto->ips_ipd_delay[IBV_RATE_100_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_120_GBPS:
proto->ips_ipd_delay[IBV_RATE_100_GBPS] = delay;
case IBV_RATE_112_GBPS:
proto->ips_ipd_delay[IBV_RATE_100_GBPS] = delay;
case IBV_RATE_100_GBPS:
proto->ips_ipd_delay[IBV_RATE_100_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_80_GBPS:
proto->ips_ipd_delay[IBV_RATE_80_GBPS] = delay;
case IBV_RATE_60_GBPS:
proto->ips_ipd_delay[IBV_RATE_60_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_40_GBPS:
proto->ips_ipd_delay[IBV_RATE_40_GBPS] = delay;
case IBV_RATE_30_GBPS:
proto->ips_ipd_delay[IBV_RATE_30_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_25_GBPS:
proto->ips_ipd_delay[IBV_RATE_25_GBPS] = delay;
case IBV_RATE_20_GBPS:
proto->ips_ipd_delay[IBV_RATE_20_GBPS] = delay;
delay += step;
step *= 2;
case IBV_RATE_10_GBPS:
proto->ips_ipd_delay[IBV_RATE_10_GBPS] = delay;
case IBV_RATE_5_GBPS:
proto->ips_ipd_delay[IBV_RATE_5_GBPS] = delay;
default:
break;
}
}
static psm2_error_t ips_gen_cct_table(struct ips_proto *proto)
{
psm2_error_t err = PSM2_OK;
uint32_t cca_divisor, ipdidx, ipdval = 1;
uint16_t *cct_table;
/* The CCT table is static currently. If it's already created then return */
if (proto->cct)
goto fail;
/* Allocate the CCT table */
cct_table = psmi_calloc(proto->ep, UNDEFINED,
proto->ccti_size, sizeof(uint16_t));
if (!cct_table) {
err = PSM2_NO_MEMORY;
goto fail;
}
if (proto->ccti_size)
{
/* The first table entry is always 0 i.e. no IPD delay */
cct_table[0] = 0;
}
/* Generate the remaining CCT table entries */
for (ipdidx = 1; ipdidx < proto->ccti_size; ipdidx += 4, ipdval++)
for (cca_divisor = 0; cca_divisor < 4; cca_divisor++) {
if ((ipdidx + cca_divisor) == proto->ccti_size)
break;
cct_table[ipdidx + cca_divisor] =
(((cca_divisor ^ 0x3) << CCA_DIVISOR_SHIFT) |
(ipdval & 0x3FFF));
_HFI_CCADBG("CCT[%d] = %x. Divisor: %x, IPD: %x\n",
ipdidx + cca_divisor,
cct_table[ipdidx + cca_divisor],
(cct_table[ipdidx + cca_divisor] >>
CCA_DIVISOR_SHIFT),
cct_table[ipdidx +
cca_divisor] & CCA_IPD_MASK);
}
/* On link up/down CCT is re-generated. If CCT table is previously created
* free it
*/
if (proto->cct) {
psmi_free(proto->cct);
proto->cct = NULL;
}
/* Update to the new CCT table */
proto->cct = cct_table;
fail:
return err;
}
static opa_rate ips_default_hfi_rate(uint16_t hfi_type)
{
opa_rate rate;
switch (hfi_type) {
case PSMI_HFI_TYPE_OPA1:
rate = IBV_RATE_100_GBPS;
break;
case PSMI_HFI_TYPE_OPA2:
rate = IBV_RATE_120_GBPS;
break;
default:
rate = IBV_RATE_MAX;
}
return rate;
}
static opa_rate ips_rate_to_enum(int link_rate)
{
opa_rate rate;
switch (link_rate) {
case 300:
rate = IBV_RATE_300_GBPS;
break;
case 200:
rate = IBV_RATE_200_GBPS;
break;
case 100:
rate = IBV_RATE_100_GBPS;
break;
case 25:
rate = IBV_RATE_25_GBPS;
break;
case 168:
rate = IBV_RATE_168_GBPS;
break;
case 112:
rate = IBV_RATE_112_GBPS;
break;
case 56:
rate = IBV_RATE_56_GBPS;
break;
case 14:
rate = IBV_RATE_14_GBPS;
break;
case 120:
rate = IBV_RATE_120_GBPS;
break;
case 80:
rate = IBV_RATE_80_GBPS;
break;
case 60:
rate = IBV_RATE_60_GBPS;
break;
case 40:
rate = IBV_RATE_40_GBPS;
break;
case 30:
rate = IBV_RATE_30_GBPS;
break;
case 20:
rate = IBV_RATE_20_GBPS;
break;
case 10:
rate = IBV_RATE_10_GBPS;
break;
case 5:
rate = IBV_RATE_5_GBPS;
break;
default:
rate = IBV_RATE_MAX;
}
return rate;
}
static psm2_error_t
ips_none_get_path_rec(struct ips_proto *proto,
uint16_t slid, uint16_t dlid, uint16_t desthfi_type,
unsigned long timeout, ips_path_rec_t **ppath_rec)
{
psm2_error_t err = PSM2_OK;
ips_path_rec_t *path_rec;
ENTRY elid, *epath = NULL;
char eplid[128];
/* Query the path record cache */
snprintf(eplid, sizeof(eplid), "%x_%x", slid, dlid);
elid.key = eplid;
hsearch_r(elid, FIND, &epath, &proto->ips_path_rec_hash);
if (!epath) {
elid.key =
psmi_calloc(proto->ep, UNDEFINED, 1, strlen(eplid) + 1);
path_rec = (ips_path_rec_t *)
psmi_calloc(proto->ep, UNDEFINED, 1,
sizeof(ips_path_rec_t));
if (!elid.key || !path_rec) {
if (elid.key)
psmi_free(elid.key);
if (path_rec)
psmi_free(path_rec);
return PSM2_NO_MEMORY;
}
/* Create path record */
path_rec->pr_slid = slid;
path_rec->pr_dlid = dlid;
path_rec->pr_mtu = proto->epinfo.ep_mtu;
path_rec->pr_pkey = proto->epinfo.ep_pkey;
path_rec->pr_sl = proto->epinfo.ep_sl;
/* Determine the IPD based on our local link rate and default link rate for
* remote hfi type.
*/
path_rec->pr_static_ipd =
proto->ips_ipd_delay[ips_default_hfi_rate(desthfi_type)];
_HFI_CCADBG("pr_static_ipd = %d\n", (int) path_rec->pr_static_ipd);
/* Setup CCA parameters for path */
if (path_rec->pr_sl > PSMI_SL_MAX) {
psmi_free(elid.key);
psmi_free(path_rec);
return PSM2_INTERNAL_ERR;
}
if (!(proto->ccti_ctrlmap & (1 << path_rec->pr_sl))) {
_HFI_CCADBG("No CCA for sl %d, disable CCA\n",
path_rec->pr_sl);
proto->flags &= ~IPS_PROTO_FLAG_CCA;
proto->flags &= ~IPS_PROTO_FLAG_CCA_PRESCAN;
}
if (!psmi_hal_has_cap(PSM_HAL_CAP_STATIC_RATE_CTRL)) {
_HFI_CCADBG("No Static-Rate-Control, disable CCA\n");
proto->flags &= ~IPS_PROTO_FLAG_CCA;
proto->flags &= ~IPS_PROTO_FLAG_CCA_PRESCAN;
}
path_rec->proto = proto;
path_rec->pr_ccti = proto->cace[path_rec->pr_sl].ccti_min;
path_rec->pr_timer_cca = NULL;
/* Determine active IPD for path. Is max of static rate and CCT table */
if (!(proto->flags & IPS_PROTO_FLAG_CCA)) {
_HFI_CCADBG("No IPS_PROTO_FLAG_CCA\n");
path_rec->pr_active_ipd = 0;
path_rec->pr_cca_divisor = 0;
_HFI_CCADBG("pr_active_ipd = %d\n", (int) path_rec->pr_active_ipd);
_HFI_CCADBG("pr_cca_divisor = %d\n", (int) path_rec->pr_cca_divisor);
} else if ((path_rec->pr_static_ipd) &&
((path_rec->pr_static_ipd + 1) >
(proto->cct[path_rec->pr_ccti] & CCA_IPD_MASK))) {
_HFI_CCADBG("IPS_PROTO_FLAG_CCA set, Setting pr_active_ipd.\n");
path_rec->pr_active_ipd = path_rec->pr_static_ipd + 1;
path_rec->pr_cca_divisor = 0;
_HFI_CCADBG("pr_active_ipd = %d\n", (int) path_rec->pr_active_ipd);
_HFI_CCADBG("pr_cca_divisor = %d\n", (int) path_rec->pr_cca_divisor);
} else {
/* Pick it from the CCT table */
_HFI_CCADBG("Picking up active IPD from CCT table, index %d, value 0x%x\n",
(int) path_rec->pr_ccti, (int) proto->cct[path_rec->pr_ccti]);
path_rec->pr_active_ipd =
proto->cct[path_rec->pr_ccti] & CCA_IPD_MASK;
path_rec->pr_cca_divisor =
proto->cct[path_rec->pr_ccti] >> CCA_DIVISOR_SHIFT;
_HFI_CCADBG("pr_active_ipd = %d\n", (int) path_rec->pr_active_ipd);
_HFI_CCADBG("pr_cca_divisor = %d\n", (int) path_rec->pr_cca_divisor);
}
/* Add path record into cache */
strcpy(elid.key, eplid);
elid.data = (void *)path_rec;
hsearch_r(elid, ENTER, &epath, &proto->ips_path_rec_hash);
} else
path_rec = (ips_path_rec_t *) epath->data;
/* Return IPS path record */
*ppath_rec = path_rec;
return err;
}
static psm2_error_t
ips_none_path_rec(struct ips_proto *proto,
uint16_t slid, uint16_t dlid, uint16_t desthfi_type,
unsigned long timeout, ips_path_grp_t **ppathgrp)
{
psm2_error_t err = PSM2_OK;
uint16_t pidx, num_path = (1 << proto->epinfo.ep_lmc);
uint16_t path_slid, path_dlid;
ips_path_rec_t *path;
ips_path_grp_t *pathgrp;
ENTRY elid, *epath = NULL;
char eplid[128];
/* For the "none" path record resolution all paths are assumed to be
* of equal priority however since we want to isolate all control
* traffic (acks, naks) to a separate path for non zero LMC subnets
* the "first path" between a pair of endpoints is always the "higher"
* priority paths. The rest of the paths are the normal (and low
* priority) paths.
*/
/* Query the path record cache */
snprintf(eplid, sizeof(eplid), "%x_%x", slid, dlid);
elid.key = eplid;
hsearch_r(elid, FIND, &epath, &proto->ips_path_grp_hash);
if (epath) { /* Find path group in cache */
*ppathgrp = (ips_path_grp_t *) epath->data;
return err;
}
/* If base lids are only used then reset num_path to 1 */
if (proto->flags & IPS_PROTO_FLAG_PPOLICY_STATIC_BASE)
num_path = 1;
/* Allocate a new pathgroup */
elid.key = psmi_calloc(proto->ep, UNDEFINED, 1, strlen(eplid) + 1);
pathgrp = (ips_path_grp_t *)
psmi_calloc(proto->ep, UNDEFINED, 1, sizeof(ips_path_grp_t) +
num_path * IPS_PATH_MAX_PRIORITY *
sizeof(ips_path_rec_t *));
if (!elid.key || !pathgrp) {
if (elid.key)
psmi_free(elid.key);
if (pathgrp)
psmi_free(pathgrp);
err = PSM2_NO_MEMORY;
goto fail;
}
/*
* dlid is the peer base lid.
* slid is the base lid for the local end point.
* Store in network byte order.
*/
pathgrp->pg_base_dlid = dlid;
pathgrp->pg_base_slid = slid;
if (num_path > 1) {
/* One control path and (num_path - 1) norm and low priority paths */
pathgrp->pg_num_paths[IPS_PATH_HIGH_PRIORITY] = 1;
pathgrp->pg_num_paths[IPS_PATH_NORMAL_PRIORITY] = num_path - 1;
pathgrp->pg_num_paths[IPS_PATH_LOW_PRIORITY] = num_path - 1;
} else {
/* LMC of 0. Use the same path for all priorities */
pathgrp->pg_num_paths[IPS_PATH_HIGH_PRIORITY] = 1;
pathgrp->pg_num_paths[IPS_PATH_NORMAL_PRIORITY] = 1;
pathgrp->pg_num_paths[IPS_PATH_LOW_PRIORITY] = 1;
}
/* For "none" path record we just setup 2^lmc paths. To get better load
* balance
*/
for (pidx = 0; pidx < num_path; pidx++) {
path_slid = __cpu_to_be16(__be16_to_cpu(slid) + pidx);
path_dlid = __cpu_to_be16(__be16_to_cpu(dlid) + pidx);
err =
ips_none_get_path_rec(proto, path_slid, path_dlid,
desthfi_type, timeout, &path);
if (err != PSM2_OK) {
psmi_free(elid.key);
psmi_free(pathgrp);
goto fail;
}
if (num_path > 1) {
if (pidx == 0) {
/* First path is always the high priority path */
pathgrp->pg_path[0][IPS_PATH_HIGH_PRIORITY] =
path;
} else {
pathgrp->pg_path[pidx -
1][IPS_PATH_NORMAL_PRIORITY] =
path;
pathgrp->pg_path[pidx -
1][IPS_PATH_LOW_PRIORITY] =
path;
}
} else {
pathgrp->pg_path[0][IPS_PATH_HIGH_PRIORITY] = path;
pathgrp->pg_path[0][IPS_PATH_NORMAL_PRIORITY] = path;
pathgrp->pg_path[0][IPS_PATH_LOW_PRIORITY] = path;
}
PSM2_LOG_MSG("path %p slid %hu dlid %hu \n",
path,
__be16_to_cpu(path->pr_slid),
__be16_to_cpu(path->pr_dlid));
}
if (proto->flags & IPS_PROTO_FLAG_PPOLICY_ADAPTIVE) {
pathgrp->pg_next_path[IPS_PATH_NORMAL_PRIORITY] =
proto->epinfo.ep_context %
pathgrp->pg_num_paths[IPS_PATH_NORMAL_PRIORITY];
pathgrp->pg_next_path[IPS_PATH_LOW_PRIORITY] =
proto->epinfo.ep_context %
pathgrp->pg_num_paths[IPS_PATH_LOW_PRIORITY];
}
/* Add path record into cache */
strcpy(elid.key, eplid);
elid.data = (void *)pathgrp;
hsearch_r(elid, ENTER, &epath, &proto->ips_path_grp_hash);
*ppathgrp = pathgrp;
fail:
if (err != PSM2_OK)
_HFI_PRDBG
("Unable to get path record for LID %x <---> DLID %x.\n",
slid, dlid);
return err;
}
static psm2_error_t ips_none_path_rec_init(struct ips_proto *proto)
{
psm2_error_t err = PSM2_OK;
/* Obtain the SL and PKEY to use from the environment (HFI_SL & PSM_KEY) */
proto->epinfo.ep_sl = proto->ep->out_sl;
proto->epinfo.ep_pkey = (uint16_t) proto->ep->network_pkey;
/*
* Parse the err_chk settings from the environment.
* <min_timeout>:<max_timeout>:<timeout_factor>
*/
{
union psmi_envvar_val env_to;
char *errchk_to = PSM_TID_TIMEOUT_DEFAULT;
int tvals[3] = {
IPS_PROTO_ERRCHK_MS_MIN_DEFAULT,
IPS_PROTO_ERRCHK_MS_MAX_DEFAULT,
IPS_PROTO_ERRCHK_FACTOR_DEFAULT
};
if (!psmi_getenv("PSM2_ERRCHK_TIMEOUT",
"Errchk timeouts in mS <min:max:factor>",
PSMI_ENVVAR_LEVEL_HIDDEN, PSMI_ENVVAR_TYPE_STR,
(union psmi_envvar_val)errchk_to, &env_to)) {
/* Not using default values, parse what we can */
errchk_to = env_to.e_str;
psmi_parse_str_tuples(errchk_to, 3, tvals);
/* Adjust for max smaller than min, things would break */
if (tvals[1] < tvals[0])
tvals[1] = tvals[0];
}
proto->epinfo.ep_timeout_ack = ms_2_cycles(tvals[0]);
proto->epinfo.ep_timeout_ack_max = ms_2_cycles(tvals[1]);
proto->epinfo.ep_timeout_ack_factor = tvals[2];
}
proto->ibta.get_path_rec = ips_none_path_rec;
proto->ibta.fini = NULL;
/* With no path records queries set pkey manually */
if (psmi_hal_set_pkey(proto->ep->context.psm_hw_ctxt,
(uint16_t) proto->ep->network_pkey) != 0) {
err = psmi_handle_error(proto->ep, PSM2_EP_DEVICE_FAILURE,
"Couldn't set device pkey 0x%x: %s",
(int)proto->ep->network_pkey,
strerror(errno));
}
return err;
}
/* (Re)load the SL2SC table */
psm2_error_t ips_ibta_init_sl2sc_table(struct ips_proto *proto)
{
int ret, i;
/* Get SL2SC table for unit, port */
for (i = 0; i < PSMI_N_SCS; i++) {
if ((ret =
psmi_hal_get_port_sl2sc(psmi_hal_get_unit_id(proto->ep->context.psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.psm_hw_ctxt),
(uint8_t) i)) < 0) {
/* Unable to get SL2SC. Set it to default */
ret = PSMI_SC_DEFAULT;
}
proto->sl2sc[i] = (uint16_t) ret;
}
psmi_hal_get_sc2vl_map(proto);
return PSM2_OK;
}
/* On link up/down we need to update some state */
psm2_error_t ips_ibta_link_updown_event(struct ips_proto *proto)
{
psm2_error_t err = PSM2_OK;
int ret;
/* Get base lid, lmc and rate as these may have changed if the link bounced */
proto->epinfo.ep_base_lid =
__cpu_to_be16((uint16_t) psm2_epid_nid(proto->ep->context.epid));
if ((ret = psmi_hal_get_port_lmc(psmi_hal_get_unit_id(proto->ep->context.psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.psm_hw_ctxt))) < 0) {
err = psmi_handle_error(proto->ep, PSM2_EP_DEVICE_FAILURE,
"Could not obtain LMC for unit %u:%u. Error: %s",
psmi_hal_get_unit_id(proto->ep->context.psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.psm_hw_ctxt),
strerror(errno));
goto fail;
}
proto->epinfo.ep_lmc = min(ret, IPS_MAX_PATH_LMC);
if ((ret = psmi_hal_get_port_rate(psmi_hal_get_unit_id(proto->ep->context.psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.psm_hw_ctxt))) <
0) {
err =
psmi_handle_error(proto->ep, PSM2_EP_DEVICE_FAILURE,
"Could obtain link rate for unit %u:%u. Error: %s",
psmi_hal_get_unit_id(proto->ep->context.psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.psm_hw_ctxt),
strerror(errno));
goto fail;
}
proto->epinfo.ep_link_rate = ips_rate_to_enum(ret);
/* Load the SL2SC2VL table */
ips_ibta_init_sl2sc_table(proto);
/* Regenerate new IPD table for the updated link rate. */
ips_gen_ipd_table(proto);
/* Generate the CCT table. */
err = ips_gen_cct_table(proto);
fail:
return err;
}
psm2_error_t
MOCKABLE(ips_ibta_init)(struct ips_proto *proto)
{
psm2_error_t err = PSM2_OK;
union psmi_envvar_val psm_path_policy;
union psmi_envvar_val disable_cca;
union psmi_envvar_val cca_prescan;
union psmi_envvar_val path_disable_lmc_interval;
/* Get the path selection policy */
psmi_getenv("PSM2_PATH_SELECTION",
"Policy to use if multiple paths are available between endpoints. Options are adaptive, static_src, static_dest, static_base. Default is adaptive.",
PSMI_ENVVAR_LEVEL_USER, PSMI_ENVVAR_TYPE_STR,
(union psmi_envvar_val)"adaptive", &psm_path_policy);
if (!strcasecmp((const char *)psm_path_policy.e_str, "adaptive"))
proto->flags |= IPS_PROTO_FLAG_PPOLICY_ADAPTIVE;
else if (!strcasecmp((const char *)psm_path_policy.e_str, "static_src"))
proto->flags |= IPS_PROTO_FLAG_PPOLICY_STATIC_SRC;
else if (!strcasecmp
((const char *)psm_path_policy.e_str, "static_dest"))
proto->flags |= IPS_PROTO_FLAG_PPOLICY_STATIC_DST;
else if (!strcasecmp
((const char *)psm_path_policy.e_str, "static_base"))
proto->flags |= IPS_PROTO_FLAG_PPOLICY_STATIC_BASE;
if (proto->flags & IPS_PROTO_FLAG_PPOLICY_ADAPTIVE)
_HFI_PRDBG("Using adaptive path selection.\n");
if (proto->flags & IPS_PROTO_FLAG_PPOLICY_STATIC_SRC)
_HFI_PRDBG("Static path selection: Src Context\n");
if (proto->flags & IPS_PROTO_FLAG_PPOLICY_STATIC_DST)
_HFI_PRDBG("Static path selection: Dest Context\n");
if (proto->flags & IPS_PROTO_FLAG_PPOLICY_STATIC_BASE)
_HFI_PRDBG("Static path selection: Base LID\n");
psmi_getenv("PSM2_DISABLE_CCA",
"Disable use of Congestion Control Architecture (CCA) [enabled] ",
PSMI_ENVVAR_LEVEL_USER, PSMI_ENVVAR_TYPE_UINT,
(union psmi_envvar_val)0, &disable_cca);
if (disable_cca.e_uint)
_HFI_CCADBG("CCA is disabled for congestion control.\n");
else {
int i;
char ccabuf[256];
uint8_t *p;
/* Start out by turning on both styles of congestion control.
* Later, we will eliminate the correct one. */
proto->flags |= IPS_PROTO_FLAG_CCA | IPS_PROTO_FLAG_CC_REPL_BECN;
/*
* If user set any environment variable, use self CCA.
*/
if (getenv("PSM2_CCTI_INCREMENT") || getenv("PSM2_CCTI_TIMER")
|| getenv("PSM2_CCTI_TABLE_SIZE")) {
goto disablecca;
}
psmi_getenv("PSM2_CCA_PRESCAN",
"Enable Congestion Control Prescanning (disabled by default) ",
PSMI_ENVVAR_LEVEL_USER, PSMI_ENVVAR_TYPE_UINT,
(union psmi_envvar_val)0, &cca_prescan);
if (cca_prescan.e_uint)
proto->flags |= IPS_PROTO_FLAG_CCA_PRESCAN;
/*
* Check qib driver CCA setting, and try to use it if available.
* Fall to self CCA setting if errors.
*/
i = psmi_hal_get_cc_settings_bin(
psmi_hal_get_unit_id(proto->ep->context.psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.psm_hw_ctxt),
ccabuf, sizeof(ccabuf));
if (i <= 0) {
goto disablecca;
}
p = (uint8_t *) ccabuf;
memcpy(&proto->ccti_ctrlmap, p, 4);
p += 4;
memcpy(&proto->ccti_portctrl, p, 2);
p += 2;
for (i = 0; i < 32; i++) {
proto->cace[i].ccti_increase = *p;
p++;
/* skip reserved u8 */
p++;
memcpy(&proto->cace[i].ccti_timer_cycles, p, 2);
p += 2;
proto->cace[i].ccti_timer_cycles =
us_2_cycles(proto->cace[i].ccti_timer_cycles);
proto->cace[i].ccti_threshold = *p;
p++;
proto->cace[i].ccti_min = *p;
p++;
}
i = psmi_hal_get_cc_table_bin(psmi_hal_get_unit_id(proto->ep->context.
psm_hw_ctxt),
psmi_hal_get_port_num(proto->ep->context.
psm_hw_ctxt),
&proto->cct);
if (i < 0) {
err = PSM2_NO_MEMORY;
goto fail;
} else if (i == 0) {
goto disablecca;
}
proto->ccti_limit = i;
proto->ccti_size = proto->ccti_limit + 1;
_HFI_CCADBG("ccti_limit = %d\n", (int) proto->ccti_limit);
for (i = 0; i < proto->ccti_limit; i++)
_HFI_CCADBG("cct[%d] = 0x%04x\n", i, (int) proto->cct[i]);
/* Note, here, we are leaving CC style(s):
(IPS_PROTO_FLAG_CCA | IPS_PROTO_FLAG_CCA_PRESCAN) */
proto->flags &= ~IPS_PROTO_FLAG_CC_REPL_BECN;
goto finishcca;
/*
* Disable CCA.
*/
disablecca:
/* Note, here, we are leaving CC style:
IPS_PROTO_FLAG_CC_REPL_BECN */
proto->flags &= ~(IPS_PROTO_FLAG_CCA | IPS_PROTO_FLAG_CCA_PRESCAN);
}
finishcca:
/* Initialize path record/group hash table */
{
uint32_t lmc_disable_low, lmc_disable_high;
int sscanf_ret;
/* The default disable_low and disable_low values
* are 2^32 - 1, the maximum allowable message size.
* So by default all messages should be smaller than the
* lower limit, and so will not have LMC dispersive
* routing disabled.
*
* Add to this, these limits are applied only to SDMA
* and PIO message, NOT TID messages. So this size
* bigger than any PIO size.
*/
psmi_getenv("PSM2_PATH_NO_LMC_RANGE",
"Disable LMC route dispersion within this range, "
"low_value:high_value\n",
PSMI_ENVVAR_LEVEL_USER, PSMI_ENVVAR_TYPE_STR,
(union psmi_envvar_val)DEF_LIMITS_STRING,
&path_disable_lmc_interval);
sscanf_ret = sscanf(path_disable_lmc_interval.e_str, "%u:%u",
&lmc_disable_low, &lmc_disable_high);
/*
* It's "invalid" for the low end of the range to be
* larger than the hig end of the range, so revert
* to the "maximum message size" (2^32 - 1).
*/
if ((sscanf_ret != 2) || (lmc_disable_low > lmc_disable_high)) {
lmc_disable_low = lmc_disable_high = DEF_LIMITS_VALUE;
}
PSM2_LOG_MSG("PSM2_PATH_NO_LMC_RANGE: "
"lmc_disable_low %u lmc_disable_high %u\n",
lmc_disable_low, lmc_disable_high);
/*
* These specify the range of message sizes in bytes, of
* the messages to disable LMC dynamic LID assignment.
*/
proto->ips_lmc_disable_low = lmc_disable_low;
proto->ips_lmc_disable_high = lmc_disable_high;
}
hcreate_r(DF_PATH_REC_HASH_SIZE, &proto->ips_path_rec_hash);
hcreate_r(DF_PATH_GRP_HASH_SIZE, &proto->ips_path_grp_hash);
/* On startup treat it as a link up/down event to setup state . */
if ((err = ips_ibta_link_updown_event(proto)) != PSM2_OK)
goto fail;
/* Setup the appropriate query interface for the endpoint */
switch (proto->ep->path_res_type) {
case PSM2_PATH_RES_OPP:
err = ips_opp_init(proto);
if (err != PSM2_OK)
_HFI_ERROR
("Unable to use OFED Plus Plus for path record queries.\n");
break;
case PSM2_PATH_RES_UMAD:
_HFI_ERROR
("Path record queries using UMAD is not supported in PSM version %d.%dx\n",
PSM2_VERNO_MAJOR, PSM2_VERNO_MINOR);
err = PSM2_EPID_PATH_RESOLUTION;
break;
case PSM2_PATH_RES_NONE:
default:
err = ips_none_path_rec_init(proto);
}
fail:
return err;
}
MOCK_DEF_EPILOGUE(ips_ibta_init);
psm2_error_t ips_ibta_fini(struct ips_proto *proto)
{
psm2_error_t err = PSM2_OK;
if (proto->ibta.fini)
err = proto->ibta.fini(proto);
/* Destroy the path record/group hash */
hdestroy_r(&proto->ips_path_rec_hash);
hdestroy_r(&proto->ips_path_grp_hash);
return err;
}