#!/bin/sh
#
# check_iso_read.sh
#
# Author: Leo Baschy
# Some small adaptions made to make it work in libcdio's test suite by
# rocky.
#
# takes zero, one, or two optional parameters in any order
#
# ONE optional parameter:
# an integer number for approximate size of .iso file in megabytes,
# default is 1, for 1 megabyte,
# to test approximately 5 gigabytes pass 5000
#
# OTHER optional parameter:
# the iso-read command you want to test,
# default is iso-read,
# has to be named iso-read to be recognized,
# could be for example src/iso-read
#
# Set environment variable VERBOSE=1 for more verbose output
RM='@RM@'
VERBOSE=${VERBOSE:-0}
# Run $@ capturing output. Show output on an error or if VERBOSE is
# set.
run_cmd() {
output=`$@ 2>&1`
if [ $? -ne 0 -o $VERBOSE -ne 0 ]; then
echo >&2 -- $output
fi
}
# Remove file $1 if that file exists
rm_if_exists() {
file=$1
[ -f $file ] && $RM $file
}
# Remove driectory $1 if that directory exists
rmdir_if_exists() {
dir=$1
[ -d $dir ] && $RM -r $dir
}
cleanup() {
for i in 0 1 2 3 4 5 6 7 8 9 ; do
rm_if_exists 1Mfile${i}s-read.txt
done
for file in exampleIso1M.iso exampleIso1M.iso.tar.gz; do
rm_if_exists $file
done
rmdir_if_exists exampleIso1M.iso.prep
}
# in $1 or $2 accept integer number as total .iso size in megabytes
case "$1" in
[0-9]* )
size="$1" ;;
*)
case "$2" in
[0-9]* )
size="$2" ;;
*)
size="1" ;; # default
esac
;;
esac
# in $1 or $2 accept a different location for iso-read,
# e.g. ~/libcdio/src/iso-read
case "$1" in
iso-read )
ISO_READ="$1" ;;
*)
case "$2" in
iso-read )
ISO_READ="$2" ;;
*)
ISO_READ="../src/iso-read" ;;
esac
;;
esac
if [ ! -x ${ISO_READ} ]; then
echo "-- $0: No ${ISO_READ}. Skipping."
exit 77
fi
echo "-- Going to use ${ISO_READ}."
echo "-- " `$ISO_READ --version`
# pick for your system,
# on a Mac mkisofs, otherwise people use newer genisoimage
isomakingcommand="@ISO_MAKING_COMMAND@"
if [ -z "$isomakingcommand" ]
then
echo "-- $0: Neither mkisofs nor genisoimage found. Skipping."
exit 77
fi
echo "-- Working with a $size megabyte large .iso file in $datadir ."
isoname="exampleIso"$size"M.iso"
prepdir="prep"
if [ ! -f "$isoname" ]
then
echo "-- Going to use " `which "$isomakingcommand"` " to prepare $isoname in $isoname.$prepdir ."
mkdir "$isoname.$prepdir"
mkdir "$isoname.$prepdir"/mixed
# a large file with many of the same characters that will compress well
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\060' > "$isoname.$prepdir/mixed/file0l.txt"
# a small file we will want to iso-read
echo "content of short text file #0 we are looking for" > "$isoname.$prepdir/mixed/file0s.txt"
# a few times over now
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\061' > "$isoname.$prepdir/mixed/file1l.txt"
echo "content of short text file #1 we are looking for" > "$isoname.$prepdir/mixed/fileOneSmall.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\062' > "$isoname.$prepdir/mixed/file2l.txt"
echo "content of short text file #2 we are looking for" > "$isoname.$prepdir/mixed/file2small.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\063' > "$isoname.$prepdir/mixed/file3l.txt"
echo "content of short text file #3 we are looking for" > "$isoname.$prepdir/mixed/file3ThreeSmall.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\064' > "$isoname.$prepdir/mixed/file4l.txt"
echo "content of short text file #4 we are looking for" > "$isoname.$prepdir/mixed/fileFourS.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\065' > "$isoname.$prepdir/mixed/file5l.txt"
echo "content of short text file #5 we are looking for" > "$isoname.$prepdir/mixed/file5small.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\066' > "$isoname.$prepdir/mixed/file6l.txt"
echo "content of short text file #6 we are looking for" > "$isoname.$prepdir/mixed/file6s.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\067' > "$isoname.$prepdir/mixed/file7l.txt"
echo "content of short text file #7 we are looking for" > "$isoname.$prepdir/mixed/fileSevenSmall.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\068' > "$isoname.$prepdir/mixed/file8l.txt"
echo "content of short text file #8 we are looking for" > "$isoname.$prepdir/mixed/file8s.txt"
run_cmd dd if=/dev/zero bs=1024 count=$size"00" | tr '\0' '\069' > "$isoname.$prepdir/mixed/file9l.txt"
echo "content of short text file #9 we are looking for" > "$isoname.$prepdir/mixed/file9s.txt"
# a potentially huge .iso file, whatever you wrote above
run_cmd "$isomakingcommand" -r -J -T -f -V "EXAMPLEISO"$size"M" -o "$isoname" "$isoname.$prepdir"
# if you want to archive a test file, this compressed one is much smaller,
# seen 4KB instead of 1MB, seen 5MB instead of 5GB
v_opt=''
[ $VERBOSE -ne 0 ] && v_opt='-v'
tar $v_opt -cf "$isoname.tar" "$isoname"
gzip $v_opt -9 "$isoname.tar"
else
echo "-- Using existing $isoname ."
fi
# remind of disk space use
# ls -al
# du -h .
echo "
-- ----------------------------------------
-- Size $size megabyte .iso file read back:
-- ----------------------------------------
"
for i in 0 1 2 3 4 5 6 7 8 9
do
echo "didn't read file #$i" > $size"Mfile"$i"s-read.txt"
done
#
"$ISO_READ" -i "$isoname" -e "mixed/file0s.txt" -o $size"Mfile0s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/fileOneSmall.txt" -o $size"Mfile1s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/file2small.txt" -o $size"Mfile2s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/file3ThreeSmall.txt" -o $size"Mfile3s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/fileFourS.txt" -o $size"Mfile4s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/file5small.txt" -o $size"Mfile5s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/file6s.txt" -o $size"Mfile6s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/fileSevenSmall.txt" -o $size"Mfile7s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/file8s.txt" -o $size"Mfile8s-read.txt"
"$ISO_READ" -i "$isoname" -e "mixed/file9s.txt" -o $size"Mfile9s-read.txt"
#
anybad=0
for i in 0 1 2 3 4 5 6 7 8 9
do
readback=`cat $size"Mfile"$i"s-read.txt"`
if [ "$readback" = "content of short text file #$i we are looking for" ]
then
echo "-- file #$i read back OK: $readback"
else
anybad=1
echo "file #$i read DEFECT : $readback"
fi
done
cleanup
if [ $anybad -eq 0 ]
then
echo "-- $0: Overall success of $0 :)"
else
echo "$0: Overall FAILURE of $0 :("
fi
exit $anybad
# if it worked correctly you should see the lines we wrote into the short files:
#
# content of short text file #i we are looking for
#
# IF however defect https://savannah.gnu.org/bugs/?39373 is still
# in effect you might see lines such as:
# 111111111111111111111111111111111111
#
# furthermore, IF however defect https://savannah.gnu.org/bugs/?39354 is still
# in effect you might see lines such as:
#
# iso-read: Could not get ISO-9660 file information out of $isoname for file mixed/file2small.txt.
# iso-read: iso-info may be able to show the contents of $isoname.