# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# This is _NOT_ the library release version, it's an API version.
# Please read Chapter 6 "Library interface versions" of the libtool
# documentation before making any modification
#
# http://sources.redhat.com/autobook/autobook/autobook_91.html
#
# The version scheme used by Libtool tracks interfaces, where an interface
# is the set of exported entry points into the library. All Libtool libraries
# start with `-version-info' set to `0:0:0' -- this will be the default
# version number if you don't explicitly set it on the Libtool link command
# line. The meaning of these numbers (from left to right) is as follows:
#
# current
# The number of the current interface exported by the library. A current
# value of `0', means that you are calling the interface exported by this
# library interface 0.
#
# revision
# The implementation number of the most recent interface exported by this
# library. In this case, a revision value of `0' means that this is the
# first implementation of the interface.
#
# If the next release of this library exports the same interface, but has
# a different implementation (perhaps some bugs have been fixed), the
# revision number will be higher, but current number will be the same.
# In that case, when given a choice, the library with the highest revision
# will always be used by the runtime loader.
#
# age
# The number of previous additional interfaces supported by this library.
# If age were `2', then this library can be linked into executables which
# were built with a release of this library that exported the current
# interface number, current, or any of the previous two interfaces.
#
# By definition age must be less than or equal to current. At the outset,
# only the first ever interface is implemented, so age can only be `0'.
#
# 1. If you have changed any of the sources for this library, the revision
# number must be incremented.
# This is a new revision of the current interface.
#
# 2. If the interface has changed, then current must be incremented, and
# revision reset to `0'.
# This is the first revision of a new interface.
#
# 3. If the new interface is a superset of the previous interface (that is,
# if the previous interface has not been broken by the changes in this
# new release), then age must be incremented.
# This release is backwards compatible with the previous release.
#
# 4. If the new interface has removed elements with respect to the previous
# interface, then you have broken backward compatibility and age must be
# reset to `0'.
# This release has a new, but backwards incompatible interface.
#
# For example, if the next release of the library included some new commands
# for an existing socket protocol, you would use -version-info 1:0:1.
# This is the first revision of a new interface. This release is backwards
# compatible with the previous release.
#
# Later, you implement a faster way of handling part of the algorithm at the
# core of the library, and release it with -version-info 1:1:1. This is a new
# revision of the current interface.
#
# Unfortunately the speed of your new implementation can only be fully
# exploited by changing the API to access the structures at a lower level,
# which breaks compatibility with the previous interface, so you release it
# as -version-info 2:0:0. This release has a new, but backwards incompatible
# interface.
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@ENABLE_DEBUG_TRUE@am__append_1 = -g -g3 -ggdb -gdwarf-2 -DIPSET_DEBUG -Wall -Werror
@ENABLE_DEBUG_FALSE@am__append_2 = -O2 -DNDEBUG
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_cflags_gcc_option.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltargz.m4 \
$(top_srcdir)/m4/ltdl.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = \
kernel/include/linux/netfilter/ipset/ip_set_compat.h
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/Make_global.am $(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
$(top_srcdir)/build-aux/ltmain.sh \
$(top_srcdir)/build-aux/missing \
$(top_srcdir)/kernel/include/linux/netfilter/ipset/ip_set_compat.h.in \
COPYING ChangeLog INSTALL README build-aux/compile \
build-aux/config.guess build-aux/config.sub \
build-aux/install-sh build-aux/ltmain.sh build-aux/missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAVE_CHECKENTRY_BOOL = @HAVE_CHECKENTRY_BOOL@
HAVE_ETHER_ADDR_COPY = @HAVE_ETHER_ADDR_COPY@
HAVE_ETHER_ADDR_EQUAL = @HAVE_ETHER_ADDR_EQUAL@
HAVE_EXPORT_H = @HAVE_EXPORT_H@
HAVE_EXPORT_SYMBOL_GPL_IN_MODULE_H = @HAVE_EXPORT_SYMBOL_GPL_IN_MODULE_H@
HAVE_IPV6_SKIP_EXTHDR_ARGS = @HAVE_IPV6_SKIP_EXTHDR_ARGS@
HAVE_IS_ZERO_ETHER_ADDR = @HAVE_IS_ZERO_ETHER_ADDR@
HAVE_KVCALLOC = @HAVE_KVCALLOC@
HAVE_KVFREE = @HAVE_KVFREE@
HAVE_LIST_LAST_ENTRY = @HAVE_LIST_LAST_ENTRY@
HAVE_LIST_NEXT_ENTRY = @HAVE_LIST_NEXT_ENTRY@
HAVE_LOCKDEP_NFNL_IS_HELD = @HAVE_LOCKDEP_NFNL_IS_HELD@
HAVE_NETLINK_DUMP_START_ARGS = @HAVE_NETLINK_DUMP_START_ARGS@
HAVE_NETLINK_EXTENDED_ACK = @HAVE_NETLINK_EXTENDED_ACK@
HAVE_NET_IN_NFNL_CALLBACK_FN = @HAVE_NET_IN_NFNL_CALLBACK_FN@
HAVE_NET_IN_XT_ACTION_PARAM = @HAVE_NET_IN_XT_ACTION_PARAM@
HAVE_NET_OPS_ASYNC = @HAVE_NET_OPS_ASYNC@
HAVE_NET_OPS_ID = @HAVE_NET_OPS_ID@
HAVE_NFNL_LOCK_SUBSYS = @HAVE_NFNL_LOCK_SUBSYS@
HAVE_NFNL_MSG_TYPE = @HAVE_NFNL_MSG_TYPE@
HAVE_NF_BRIDGE_GET_PHYSDEV = @HAVE_NF_BRIDGE_GET_PHYSDEV@
HAVE_NLA_PUT_64BIT = @HAVE_NLA_PUT_64BIT@
HAVE_NLA_PUT_BE16 = @HAVE_NLA_PUT_BE16@
HAVE_NLA_PUT_BE64 = @HAVE_NLA_PUT_BE64@
HAVE_NLA_PUT_IN_ADDR = @HAVE_NLA_PUT_IN_ADDR@
HAVE_NL_INFO_PORTID = @HAVE_NL_INFO_PORTID@
HAVE_NS_CAPABLE = @HAVE_NS_CAPABLE@
HAVE_PASSING_EXTENDED_ACK_TO_CALLBACKS = @HAVE_PASSING_EXTENDED_ACK_TO_CALLBACKS@
HAVE_PASSING_EXTENDED_ACK_TO_PARSERS = @HAVE_PASSING_EXTENDED_ACK_TO_PARSERS@
HAVE_RBTREE_POSTORDER_FOR_EACH_ENTRY_SAFE = @HAVE_RBTREE_POSTORDER_FOR_EACH_ENTRY_SAFE@
HAVE_STATE_IN_XT_ACTION_PARAM = @HAVE_STATE_IN_XT_ACTION_PARAM@
HAVE_STRSCPY = @HAVE_STRSCPY@
HAVE_STRUCT_XT_ACTION_PARAM = @HAVE_STRUCT_XT_ACTION_PARAM@
HAVE_TCF_EMATCH_OPS_CHANGE_ARG_NET = @HAVE_TCF_EMATCH_OPS_CHANGE_ARG_NET@
HAVE_TCF_EMATCH_STRUCT_NET = @HAVE_TCF_EMATCH_STRUCT_NET@
HAVE_TC_SKB_PROTOCOL = @HAVE_TC_SKB_PROTOCOL@
HAVE_TIMER_SETUP = @HAVE_TIMER_SETUP@
HAVE_TYPEDEF_SCTP_SCTPHDR_T = @HAVE_TYPEDEF_SCTP_SCTPHDR_T@
HAVE_USER_NS_IN_STRUCT_NET = @HAVE_USER_NS_IN_STRUCT_NET@
HAVE_VZALLOC = @HAVE_VZALLOC@
HAVE_XT_FAMILY = @HAVE_XT_FAMILY@
HAVE_XT_MTCHK_PARAM_STRUCT_NET = @HAVE_XT_MTCHK_PARAM_STRUCT_NET@
HAVE_XT_NET = @HAVE_XT_NET@
HAVE_XT_TARGET_PARAM = @HAVE_XT_TARGET_PARAM@
INCLTDL = @INCLTDL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KBUILDDIR = @KBUILDDIR@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBADD_DL = @LIBADD_DL@
LIBADD_DLD_LINK = @LIBADD_DLD_LINK@
LIBADD_DLOPEN = @LIBADD_DLOPEN@
LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@
LIBLTDL = @LIBLTDL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTDLDEPS = @LTDLDEPS@
LTDLINCL = @LTDLINCL@
LTDLOPEN = @LTDLOPEN@
LTLIBOBJS = @LTLIBOBJS@
LT_ARGZ_H = @LT_ARGZ_H@
LT_CONFIG_H = @LT_CONFIG_H@
LT_DLLOADERS = @LT_DLLOADERS@
LT_DLPREOPEN = @LT_DLPREOPEN@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MAXSETS = @MAXSETS@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SETTYPE_MODLIST = @SETTYPE_MODLIST@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bashcompdir = @bashcompdir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libmnl_CFLAGS = @libmnl_CFLAGS@
libmnl_LIBS = @libmnl_LIBS@
localedir = @localedir@
localstatedir = @localstatedir@
ltdl_LIBOBJS = @ltdl_LIBOBJS@
ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sys_symbol_underscore = @sys_symbol_underscore@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4
# curr:rev:age
LIBVERSION = 14:0:1
AM_CPPFLAGS = $(kinclude_CFLAGS) $(all_includes) -I$(top_srcdir)/include
AM_CFLAGS = -std=gnu99 $(am__append_1) $(am__append_2)
SPARSE = sparse
SPARSE_FLAGS = -Wsparse-all -I../include $(SPARSE_EXT_FLAGS)
IPSET_AM_V_CHECK = $(ipset_am__v_CHECK_$(V))
ipset_am__v_CHECK_ = $(ipset_am__v_CHECK_$(AM_DEFAULT_VERBOSITY))
ipset_am__v_CHECK_0 = @echo " CHECK " $<;
@WITH_KBUILDDIR_FALSE@KBUILD_OUTPUT = /lib/modules/`uname -r`/build
@WITH_KBUILDDIR_TRUE@KBUILD_OUTPUT = $(KBUILDDIR)
@WITH_MAXSETS_FALSE@IP_SET_MAX = 256
@WITH_MAXSETS_TRUE@IP_SET_MAX = $(MAXSETS)
SUBDIRS = include/libipset lib src utils
INSTALL_MOD_PATH = /
cleanup_dirs := . include/libipset lib src tests
DISTCHECK_CONFIGURE_FLAGS = --with-kmod=no
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Make_global.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/Make_global.am $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
kernel/include/linux/netfilter/ipset/ip_set_compat.h: $(top_builddir)/config.status $(top_srcdir)/kernel/include/linux/netfilter/ipset/ip_set_compat.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
.PRECIOUS: Makefile
sparse:
$(MAKE) -C lib sparse-check
$(MAKE) -C src sparse-check
modules_sparse:
@WITH_KMOD_TRUE@ ${MAKE} -C $(KBUILD_OUTPUT) M=$$PWD/kernel/net \
@WITH_KMOD_TRUE@ V=$V W=1 C=2 CF="-D__CHECK_ENDIAN__ -Wsparse-all" \
@WITH_KMOD_TRUE@ KCFLAGS="-DPACKAGE_VERSION=$(PACKAGE_VERSION) -DCHECK_KCONFIG -Wextra" \
@WITH_KMOD_TRUE@ IP_SET_MAX=$(IP_SET_MAX) KDIR=$$PWD/kernel modules
@WITH_KMOD_FALSE@ @echo Skipping kernel modules due to --with-kmod=no
modules:
@WITH_KMOD_TRUE@ ${MAKE} -C $(KBUILD_OUTPUT) M=$$PWD/kernel/net V=$V \
@WITH_KMOD_TRUE@ KCFLAGS="-DPACKAGE_VERSION=$(PACKAGE_VERSION)" \
@WITH_KMOD_TRUE@ IP_SET_MAX=$(IP_SET_MAX) KDIR=$$PWD/kernel modules
@WITH_KMOD_FALSE@ @echo Skipping kernel modules due to --with-kmod=no
define DEPMOD_WARNING
!!! WARNING !!! WARNING !!! WARNING !!!
Your distribution seems to ignore the /lib/modules/<kernelrelease>/extra/
subdirectory, where the ipset kernel modules are installed.
Add the 'extra' directory to the search definition of your depmod
configuration (/etc/depmod.conf or /etc/depmod.d/) and re-run
depmod <kernelrelease>
otherwise the ipset kernel modules in the extra subdir will be ignored.
endef
export DEPMOD_WARNING
define MODULE_WARNING
!!! WARNING !!! WARNING !!! WARNING !!!
Your running system has got ipset related kernel modules loaded in.
You MUST rmmod the ip_set* kernel modules in order to make possible
for the system to load in the newly installed ones.
endef
export MODULE_WARNING
modules_install:
@WITH_KMOD_TRUE@ ${MAKE} -C $(KBUILD_OUTPUT) M=$$PWD/kernel/net \
@WITH_KMOD_TRUE@ KDIR=$$PWD/kernel modules_install
@WITH_KMOD_TRUE@ @modinfo -b ${INSTALL_MOD_PATH} ip_set_hash_ip | ${GREP} /extra/ >/dev/null || echo "$$DEPMOD_WARNING"
@WITH_KMOD_TRUE@ @lsmod | ${GREP} '^ip_set' >/dev/null && echo "$$MODULE_WARNING"
@WITH_KMOD_FALSE@ @echo Skipping kernel modules due to --with-kmod=no
modules_clean:
@WITH_KMOD_TRUE@ ${MAKE} -C $(KBUILD_OUTPUT) M=$$PWD/kernel/net \
@WITH_KMOD_TRUE@ KDIR=$$PWD/kernel clean
@WITH_KMOD_FALSE@ @echo Skipping kernel modules due to --with-kmod=no
update_includes:
for x in ip_set.h ip_set_bitmap.h ip_set_hash.h ip_set_list.h; do \
sed -r -e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @' \
-e 's@^#include <linux/netfilter/ipset/ip_set.h>@@' \
kernel/include/uapi/linux/netfilter/ipset/$$x \
> include/libipset/linux_$$x; \
done
update_utils:
wget -4 -O /tmp/ipset-bash-completion.tar.gz http://sourceforge.net/projects/ipset-bashcompl/files/latest/download
cd utils/ipset_bash_completion; tar xz --strip-components=1 -f /tmp/ipset-bash-completion.tar.gz
rm -f /tmp/ipset-bash-completion.tar.gz
wget -4 -O /tmp/ipset-list.tar.gz http://sourceforge.net/projects/ipset-list/files/latest/download
cd utils/ipset_list; tar xz --strip-components=1 -f /tmp/ipset-list.tar.gz
rm -f /tmp/ipset-list.tar.gz
check_libmap:
@./check_libmap.sh
tests:
cd tests; ./runtest.sh
tidy: distclean modules_clean
rm -rf .deps $(foreach dir,$(cleanup_dirs),$(wildcard $(dir)/*~))
rm -rf aclocal.m4 autom4te.cache
rm -rf config.* configure compile depcomp install-sh libtool ltmain.sh
rm -rf Makefile Makefile.in lib/Makefile lib/Makefile.in src/Makefile src/Makefile.in
rm -rf missing stamp-h1 m4/libtool.m4 m4/lt*.m4
rm -rf lib/ipset_settype_check lib/types_init.c
find . -name '*~' -delete
tarball:
rm -Rf /tmp/ipset-${PACKAGE_VERSION};
pushd ${top_srcdir} && git archive --prefix=ipset-${PACKAGE_VERSION}/ HEAD | tar -C /tmp -x && popd;
pushd /tmp/ipset-${PACKAGE_VERSION} && ./autogen.sh && popd;
tar -C /tmp -cjf ipset-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ipset-${PACKAGE_VERSION}/;
rm -Rf /tmp/ipset-${PACKAGE_VERSION};
help:
@echo ' <nothing> - Compile userspace'
@echo ' modules - Compile kernel modules'
@echo ' install - Install userspace'
@echo ' modules_install - Install kernel modules'
@echo ' clean - Remove generated userspace files'
@echo ' modules_clean - Remove generated kernelspace files'
@echo ' tidy - Tidy up the whole source tree'
@echo ' tests - Run testsuite'
@echo ' sparse - Check userspace with sparse'
@echo ' modules_sparse - Check kernelspace with sparse'
@echo ' update_includes - Update userspace include files'
@echo ' update_utils - Update bash utilities'
@echo ' check_libmap - Check libipset.map for missing symbols'
@echo ' tarball - Create a tarball for a new release'
.PHONY: modules modules_instal modules_clean update_includes tests tarball
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: