/*
* Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistribution of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistribution in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* This software is provided "AS IS," without a warranty of any kind.
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
* INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
* SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
* FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL
* SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
* OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
* PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
* LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
* EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <time.h>
#include <ipmitool/helper.h>
#include <ipmitool/log.h>
#include <ipmitool/bswap.h>
#include <ipmitool/ipmi.h>
#include <ipmitool/ipmi_intf.h>
#include <ipmitool/ipmi_mc.h>
#include <ipmitool/ipmi_strings.h>
extern int verbose;
static int ipmi_sysinfo_main(struct ipmi_intf *intf, int argc, char ** argv,
int is_set);
static void printf_sysinfo_usage(int full_help);
/* ipmi_mc_reset - attempt to reset an MC
*
* @intf: ipmi interface
* @cmd: reset command to send
* BMC_WARM_RESET or
* BMC_COLD_RESET
*
* returns 0 on success
* returns -1 on error
*/
static int
ipmi_mc_reset(struct ipmi_intf * intf, int cmd)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
if( !intf->opened )
intf->open(intf);
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = cmd;
req.msg.data_len = 0;
if (cmd == BMC_COLD_RESET)
intf->noanswer = 1;
rsp = intf->sendrecv(intf, &req);
if (cmd == BMC_COLD_RESET)
intf->abort = 1;
if (cmd == BMC_COLD_RESET && rsp == NULL) {
/* This is expected. See 20.2 Cold Reset Command, p.243, IPMIv2.0 rev1.0 */
} else if (rsp == NULL) {
lprintf(LOG_ERR, "MC reset command failed.");
return (-1);
} else if (rsp->ccode > 0) {
lprintf(LOG_ERR, "MC reset command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return (-1);
}
printf("Sent %s reset command to MC\n",
(cmd == BMC_WARM_RESET) ? "warm" : "cold");
return 0;
}
#ifdef HAVE_PRAGMA_PACK
#pragma pack(1)
#endif
struct bmc_enables_data {
#if WORDS_BIGENDIAN
uint8_t oem2 : 1;
uint8_t oem1 : 1;
uint8_t oem0 : 1;
uint8_t __reserved : 1;
uint8_t system_event_log : 1;
uint8_t event_msgbuf : 1;
uint8_t event_msgbuf_intr : 1;
uint8_t receive_msg_intr : 1;
#else
uint8_t receive_msg_intr : 1;
uint8_t event_msgbuf_intr : 1;
uint8_t event_msgbuf : 1;
uint8_t system_event_log : 1;
uint8_t __reserved : 1;
uint8_t oem0 : 1;
uint8_t oem1 : 1;
uint8_t oem2 : 1;
#endif
} ATTRIBUTE_PACKING;
#ifdef HAVE_PRAGMA_PACK
#pragma pack(0)
#endif
struct bitfield_data {
const char * name;
const char * desc;
uint32_t mask;
} mc_enables_bf[] = {
{
.name = "recv_msg_intr",
.desc = "Receive Message Queue Interrupt",
.mask = 1<<0,
},
{
.name = "event_msg_intr",
.desc = "Event Message Buffer Full Interrupt",
.mask = 1<<1,
},
{
.name = "event_msg",
.desc = "Event Message Buffer",
.mask = 1<<2,
},
{
.name = "system_event_log",
.desc = "System Event Logging",
.mask = 1<<3,
},
{
.name = "oem0",
.desc = "OEM 0",
.mask = 1<<5,
},
{
.name = "oem1",
.desc = "OEM 1",
.mask = 1<<6,
},
{
.name = "oem2",
.desc = "OEM 2",
.mask = 1<<7,
},
{ NULL },
};
static void
printf_mc_reset_usage(void)
{
lprintf(LOG_NOTICE, "usage: mc reset <warm|cold>");
} /* printf_mc_reset_usage(void) */
static void
printf_mc_usage(void)
{
struct bitfield_data * bf;
lprintf(LOG_NOTICE, "MC Commands:");
lprintf(LOG_NOTICE, " reset <warm|cold>");
lprintf(LOG_NOTICE, " guid");
lprintf(LOG_NOTICE, " info");
lprintf(LOG_NOTICE, " watchdog <get|reset|off>");
lprintf(LOG_NOTICE, " selftest");
lprintf(LOG_NOTICE, " getenables");
lprintf(LOG_NOTICE, " setenables <option=on|off> ...");
for (bf = mc_enables_bf; bf->name != NULL; bf++) {
lprintf(LOG_NOTICE, " %-20s %s", bf->name, bf->desc);
}
printf_sysinfo_usage(0);
}
static void
printf_sysinfo_usage(int full_help)
{
if (full_help != 0)
lprintf(LOG_NOTICE, "usage:");
lprintf(LOG_NOTICE, " getsysinfo <argument>");
if (full_help != 0) {
lprintf(LOG_NOTICE,
" Retrieves system info from BMC for given argument");
}
lprintf(LOG_NOTICE, " setsysinfo <argument> <string>");
if (full_help != 0) {
lprintf(LOG_NOTICE,
" Stores system info string for given argument to BMC");
lprintf(LOG_NOTICE, "");
lprintf(LOG_NOTICE, " Valid arguments are:");
}
lprintf(LOG_NOTICE,
" system_fw_version System firmware (e.g. BIOS) version");
lprintf(LOG_NOTICE,
" primary_os_name Primary operating system name");
lprintf(LOG_NOTICE, " os_name Operating system name");
lprintf(LOG_NOTICE,
" system_name System Name of server(vendor dependent)");
lprintf(LOG_NOTICE,
" delloem_os_version Running version of operating system");
lprintf(LOG_NOTICE, " delloem_url URL of BMC webserver");
lprintf(LOG_NOTICE, "");
}
static void
print_watchdog_usage(void)
{
lprintf(LOG_NOTICE, "usage: watchdog <command>:");
lprintf(LOG_NOTICE, " get : Get Current Watchdog settings");
lprintf(LOG_NOTICE, " reset : Restart Watchdog timer based on most recent settings");
lprintf(LOG_NOTICE, " off : Shut off a running Watchdog timer");
}
/* ipmi_mc_get_enables - print out MC enables
*
* @intf: ipmi inteface
*
* returns 0 on success
* returns -1 on error
*/
static int
ipmi_mc_get_enables(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
struct bitfield_data * bf;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_GET_GLOBAL_ENABLES;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Get Global Enables command failed");
return -1;
}
if (rsp->ccode > 0) {
lprintf(LOG_ERR, "Get Global Enables command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
for (bf = mc_enables_bf; bf->name != NULL; bf++) {
printf("%-40s : %sabled\n", bf->desc,
rsp->data[0] & bf->mask ? "en" : "dis");
}
return 0;
}
/* ipmi_mc_set_enables - set MC enable flags
*
* @intf: ipmi inteface
* @argc: argument count
* @argv: argument list
*
* returns 0 on success
* returns -1 on error
*/
static int
ipmi_mc_set_enables(struct ipmi_intf * intf, int argc, char ** argv)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
struct bitfield_data * bf;
uint8_t en;
int i;
if (argc < 1) {
printf_mc_usage();
return (-1);
}
else if (strncmp(argv[0], "help", 4) == 0) {
printf_mc_usage();
return 0;
}
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_GET_GLOBAL_ENABLES;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Get Global Enables command failed");
return -1;
}
if (rsp->ccode > 0) {
lprintf(LOG_ERR, "Get Global Enables command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
en = rsp->data[0];
for (i = 0; i < argc; i++) {
for (bf = mc_enables_bf; bf->name != NULL; bf++) {
int nl = strlen(bf->name);
if (strncmp(argv[i], bf->name, nl) != 0)
continue;
if (strncmp(argv[i]+nl+1, "off", 3) == 0) {
printf("Disabling %s\n", bf->desc);
en &= ~bf->mask;
}
else if (strncmp(argv[i]+nl+1, "on", 2) == 0) {
printf("Enabling %s\n", bf->desc);
en |= bf->mask;
}
else {
lprintf(LOG_ERR, "Unrecognized option: %s", argv[i]);
}
}
}
if (en == rsp->data[0]) {
printf("\nNothing to change...\n");
ipmi_mc_get_enables(intf);
return 0;
}
req.msg.cmd = BMC_SET_GLOBAL_ENABLES;
req.msg.data = &en;
req.msg.data_len = 1;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Set Global Enables command failed");
return -1;
}
else if (rsp->ccode > 0) {
lprintf(LOG_ERR, "Set Global Enables command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
printf("\nVerifying...\n");
ipmi_mc_get_enables(intf);
return 0;
}
/* IPM Device, Get Device ID Command - Additional Device Support */
const char *ipm_dev_adtl_dev_support[8] = {
"Sensor Device", /* bit 0 */
"SDR Repository Device", /* bit 1 */
"SEL Device", /* bit 2 */
"FRU Inventory Device", /* ... */
"IPMB Event Receiver",
"IPMB Event Generator",
"Bridge",
"Chassis Device" /* bit 7 */
};
/* ipmi_mc_get_deviceid - print information about this MC
*
* @intf: ipmi interface
*
* returns 0 on success
* returns -1 on error
*/
static int
ipmi_mc_get_deviceid(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
struct ipm_devid_rsp *devid;
int i;
const char *product=NULL;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_GET_DEVICE_ID;
req.msg.data_len = 0;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Get Device ID command failed");
return -1;
}
if (rsp->ccode > 0) {
lprintf(LOG_ERR, "Get Device ID command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
devid = (struct ipm_devid_rsp *) rsp->data;
printf("Device ID : %i\n",
devid->device_id);
printf("Device Revision : %i\n",
devid->device_revision & IPM_DEV_DEVICE_ID_REV_MASK);
printf("Firmware Revision : %u.%02x\n",
devid->fw_rev1 & IPM_DEV_FWREV1_MAJOR_MASK,
devid->fw_rev2);
printf("IPMI Version : %x.%x\n",
IPM_DEV_IPMI_VERSION_MAJOR(devid->ipmi_version),
IPM_DEV_IPMI_VERSION_MINOR(devid->ipmi_version));
printf("Manufacturer ID : %lu\n",
(long)IPM_DEV_MANUFACTURER_ID(devid->manufacturer_id));
printf("Manufacturer Name : %s\n",
val2str( (long)IPM_DEV_MANUFACTURER_ID(devid->manufacturer_id),
ipmi_oem_info) );
printf("Product ID : %u (0x%02x%02x)\n",
buf2short((uint8_t *)(devid->product_id)),
devid->product_id[1], devid->product_id[0]);
product=oemval2str(IPM_DEV_MANUFACTURER_ID(devid->manufacturer_id),
(devid->product_id[1]<<8)+devid->product_id[0],
ipmi_oem_product_info);
if (product!=NULL) {
printf("Product Name : %s\n", product);
}
printf("Device Available : %s\n",
(devid->fw_rev1 & IPM_DEV_FWREV1_AVAIL_MASK) ?
"no" : "yes");
printf("Provides Device SDRs : %s\n",
(devid->device_revision & IPM_DEV_DEVICE_ID_SDR_MASK) ?
"yes" : "no");
printf("Additional Device Support :\n");
for (i = 0; i < IPM_DEV_ADTL_SUPPORT_BITS; i++) {
if (devid->adtl_device_support & (1 << i)) {
printf(" %s\n", ipm_dev_adtl_dev_support[i]);
}
}
if (rsp->data_len == sizeof(*devid)) {
printf("Aux Firmware Rev Info : \n");
/* These values could be looked-up by vendor if documented,
* so we put them on individual lines for better treatment later
*/
printf(" 0x%02x\n 0x%02x\n 0x%02x\n 0x%02x\n",
devid->aux_fw_rev[0],
devid->aux_fw_rev[1],
devid->aux_fw_rev[2],
devid->aux_fw_rev[3]);
}
return 0;
}
/* _ipmi_mc_get_guid - Gets BMCs GUID according to (22.14)
*
* @intf: ipmi interface
* @guid: pointer where to store BMC GUID
*
* returns - negative number means error, positive is a ccode.
*/
int
_ipmi_mc_get_guid(struct ipmi_intf *intf, struct ipmi_guid_t *guid)
{
struct ipmi_rs *rsp;
struct ipmi_rq req;
if (guid == NULL) {
return (-3);
}
memset(guid, 0, sizeof(struct ipmi_guid_t));
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_GET_GUID;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
return (-1);
} else if (rsp->ccode > 0) {
return rsp->ccode;
} else if (rsp->data_len != 16
|| rsp->data_len != sizeof(struct ipmi_guid_t)) {
return (-2);
}
memcpy(guid, &rsp->data[0], sizeof(struct ipmi_guid_t));
return 0;
}
/* ipmi_mc_print_guid - print-out given BMC GUID
*
* @guid - struct with GUID.
*
* returns 0
*/
static int
ipmi_mc_print_guid(struct ipmi_guid_t guid)
{
char tbuf[40];
time_t s;
memset(tbuf, 0, 40);
/* Kipp - changed order of last field (node) to follow specification */
printf("System GUID : %08x-%04x-%04x-%04x-%02x%02x%02x%02x%02x%02x\n",
guid.time_low, guid.time_mid, guid.time_hi_and_version,
guid.clock_seq_hi_variant << 8 | guid.clock_seq_low,
guid.node[0], guid.node[1], guid.node[2],
guid.node[3], guid.node[4], guid.node[5]);
s = (time_t)guid.time_low; /* Kipp - removed the BSWAP_32, it was not needed here */
strftime(tbuf, sizeof(tbuf), "%m/%d/%Y %H:%M:%S", localtime(&s));
printf("Timestamp : %s\n", tbuf);
return 0;
}
/* ipmi_mc_get_guid - Gets and prints-out System GUID */
int
ipmi_mc_get_guid(struct ipmi_intf *intf)
{
struct ipmi_guid_t guid;
int rc;
rc = _ipmi_mc_get_guid(intf, &guid);
if (eval_ccode(rc) != 0) {
return (-1);
}
rc = ipmi_mc_print_guid(guid);
return rc;
}
/* ipmi_mc_get_selftest - returns and print selftest results
*
* @intf: ipmi interface
*/
static int ipmi_mc_get_selftest(struct ipmi_intf * intf)
{
int rv = 0;
struct ipmi_rs * rsp;
struct ipmi_rq req;
struct ipm_selftest_rsp *sft_res;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_GET_SELF_TEST;
req.msg.data_len = 0;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "No response from devices\n");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Bad response: (%s)",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
sft_res = (struct ipm_selftest_rsp *) rsp->data;
if (sft_res->code == IPM_SFT_CODE_OK) {
printf("Selftest: passed\n");
rv = 0;
}
else if (sft_res->code == IPM_SFT_CODE_NOT_IMPLEMENTED) {
printf("Selftest: not implemented\n");
rv = -1;
}
else if (sft_res->code == IPM_SFT_CODE_DEV_CORRUPTED) {
printf("Selftest: device corrupted\n");
rv = -1;
if (sft_res->test & IPM_SELFTEST_SEL_ERROR) {
printf(" -> SEL device not accessible\n");
}
if (sft_res->test & IPM_SELFTEST_SDR_ERROR) {
printf(" -> SDR repository not accesible\n");
}
if (sft_res->test & IPM_SELFTEST_FRU_ERROR) {
printf("FRU device not accessible\n");
}
if (sft_res->test & IPM_SELFTEST_IPMB_ERROR) {
printf("IPMB signal lines do not respond\n");
}
if (sft_res->test & IPM_SELFTEST_SDRR_EMPTY) {
printf("SDR repository empty\n");
}
if (sft_res->test & IPM_SELFTEST_INTERNAL_USE) {
printf("Internal Use Area corrupted\n");
}
if (sft_res->test & IPM_SELFTEST_FW_BOOTBLOCK) {
printf("Controller update boot block corrupted\n");
}
if (sft_res->test & IPM_SELFTEST_FW_CORRUPTED) {
printf("controller operational firmware corrupted\n");
}
}
else if (sft_res->code == IPM_SFT_CODE_FATAL_ERROR) {
printf("Selftest : fatal error\n");
printf("Failure code : %02x\n", sft_res->test);
rv = -1;
}
else if (sft_res->code == IPM_SFT_CODE_RESERVED) {
printf("Selftest: N/A");
rv = -1;
}
else {
printf("Selftest : device specific (%02Xh)\n", sft_res->code);
printf("Failure code : %02Xh\n", sft_res->test);
rv = 0;
}
return rv;
}
/* ipmi_mc_get_watchdog
*
* @intf: ipmi interface
*
* returns 0 on success
* returns -1 on error
*/
const char *wdt_use_string[8] = {
"Reserved",
"BIOS FRB2",
"BIOS/POST",
"OS Load",
"SMS/OS",
"OEM",
"Reserved",
"Reserved"
};
const char *wdt_action_string[8] = {
"No action",
"Hard Reset",
"Power Down",
"Power Cycle",
"Reserved",
"Reserved",
"Reserved",
"Reserved"
};
static int
ipmi_mc_get_watchdog(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
struct ipm_get_watchdog_rsp * wdt_res;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_GET_WATCHDOG_TIMER;
req.msg.data_len = 0;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Get Watchdog Timer command failed");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Get Watchdog Timer command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
wdt_res = (struct ipm_get_watchdog_rsp *) rsp->data;
printf("Watchdog Timer Use: %s (0x%02x)\n",
wdt_use_string[(wdt_res->timer_use & 0x07 )], wdt_res->timer_use);
printf("Watchdog Timer Is: %s\n",
wdt_res->timer_use & 0x40 ? "Started/Running" : "Stopped");
printf("Watchdog Timer Actions: %s (0x%02x)\n",
wdt_action_string[(wdt_res->timer_actions&0x07)], wdt_res->timer_actions);
printf("Pre-timeout interval: %d seconds\n", wdt_res->pre_timeout);
printf("Timer Expiration Flags: 0x%02x\n", wdt_res->timer_use_exp);
printf("Initial Countdown: %i sec\n",
((wdt_res->initial_countdown_msb << 8) | wdt_res->initial_countdown_lsb)/10);
printf("Present Countdown: %i sec\n",
(((wdt_res->present_countdown_msb << 8) | wdt_res->present_countdown_lsb)) / 10);
return 0;
}
/* ipmi_mc_shutoff_watchdog
*
* @intf: ipmi interface
*
* returns 0 on success
* returns -1 on error
*/
static int
ipmi_mc_shutoff_watchdog(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
unsigned char msg_data[6];
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_SET_WATCHDOG_TIMER;
req.msg.data = msg_data;
req.msg.data_len = 6;
/*
* The only set cmd we're allowing is to shut off the timer.
* Turning on the timer should be the job of the ipmi watchdog driver.
* See 'modinfo ipmi_watchdog' for more info. (NOTE: the reset
* command will restart the timer if it's already been initialized.)
*
* Out-of-band watchdog set commands can still be sent via the raw
* command interface but this is a very dangerous thing to do since
* a periodic "poke"/reset over a network is unreliable. This is
* not a recommended way to use the IPMI watchdog commands.
*/
msg_data[0] = IPM_WATCHDOG_SMS_OS;
msg_data[1] = IPM_WATCHDOG_NO_ACTION;
msg_data[2] = 0x00; /* pretimeout interval */
msg_data[3] = IPM_WATCHDOG_CLEAR_SMS_OS;
msg_data[4] = 0xb8; /* countdown lsb (100 ms/count) */
msg_data[5] = 0x0b; /* countdown msb - 5 mins */
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Watchdog Timer Shutoff command failed!");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Watchdog Timer Shutoff command failed! %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
printf("Watchdog Timer Shutoff successful -- timer stopped\n");
return 0;
}
/* ipmi_mc_rst_watchdog
*
* @intf: ipmi interface
*
* returns 0 on success
* returns -1 on error
*/
static int
ipmi_mc_rst_watchdog(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = BMC_RESET_WATCHDOG_TIMER;
req.msg.data_len = 0;
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL) {
lprintf(LOG_ERR, "Reset Watchdog Timer command failed!");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Reset Watchdog Timer command failed: %s",
(rsp->ccode == IPM_WATCHDOG_RESET_ERROR) ?
"Attempt to reset uninitialized watchdog" :
val2str(rsp->ccode, completion_code_vals));
return -1;
}
printf("IPMI Watchdog Timer Reset - countdown restarted!\n");
return 0;
}
/* ipmi_mc_main - top-level handler for MC functions
*
* @intf: ipmi interface
* @argc: number of arguments
* @argv: argument list
*
* returns 0 on success
* returns -1 on error
*/
int
ipmi_mc_main(struct ipmi_intf * intf, int argc, char ** argv)
{
int rc = 0;
if (argc < 1) {
lprintf(LOG_ERR, "Not enough parameters given.");
printf_mc_usage();
rc = (-1);
}
else if (strncmp(argv[0], "help", 4) == 0) {
printf_mc_usage();
rc = 0;
}
else if (strncmp(argv[0], "reset", 5) == 0) {
if (argc < 2) {
lprintf(LOG_ERR, "Not enough parameters given.");
printf_mc_reset_usage();
rc = (-1);
}
else if (strncmp(argv[1], "help", 4) == 0) {
printf_mc_reset_usage();
rc = 0;
}
else if (strncmp(argv[1], "cold", 4) == 0) {
rc = ipmi_mc_reset(intf, BMC_COLD_RESET);
}
else if (strncmp(argv[1], "warm", 4) == 0) {
rc = ipmi_mc_reset(intf, BMC_WARM_RESET);
}
else {
lprintf(LOG_ERR, "Invalid mc/bmc %s command: %s", argv[0], argv[1]);
printf_mc_reset_usage();
rc = (-1);
}
}
else if (strncmp(argv[0], "info", 4) == 0) {
rc = ipmi_mc_get_deviceid(intf);
}
else if (strncmp(argv[0], "guid", 4) == 0) {
rc = ipmi_mc_get_guid(intf);
}
else if (strncmp(argv[0], "getenables", 10) == 0) {
rc = ipmi_mc_get_enables(intf);
}
else if (strncmp(argv[0], "setenables", 10) == 0) {
rc = ipmi_mc_set_enables(intf, argc-1, &(argv[1]));
}
else if (!strncmp(argv[0], "selftest", 8)) {
rc = ipmi_mc_get_selftest(intf);
}
else if (!strncmp(argv[0], "watchdog", 8)) {
if (argc < 2) {
lprintf(LOG_ERR, "Not enough parameters given.");
print_watchdog_usage();
rc = (-1);
}
else if (strncmp(argv[1], "help", 4) == 0) {
print_watchdog_usage();
rc = 0;
}
else if (strncmp(argv[1], "get", 3) == 0) {
rc = ipmi_mc_get_watchdog(intf);
}
else if(strncmp(argv[1], "off", 3) == 0) {
rc = ipmi_mc_shutoff_watchdog(intf);
}
else if(strncmp(argv[1], "reset", 5) == 0) {
rc = ipmi_mc_rst_watchdog(intf);
}
else {
lprintf(LOG_ERR, "Invalid mc/bmc %s command: %s", argv[0], argv[1]);
print_watchdog_usage();
rc = (-1);
}
}
else if (strncmp(argv[0], "getsysinfo", 10) == 0) {
rc = ipmi_sysinfo_main(intf, argc, argv, 0);
}
else if (strncmp(argv[0], "setsysinfo", 10) == 0) {
rc = ipmi_sysinfo_main(intf, argc, argv, 1);
}
else {
lprintf(LOG_ERR, "Invalid mc/bmc command: %s", argv[0]);
printf_mc_usage();
rc = (-1);
}
return rc;
}
/*
* sysinfo_param() - function converts sysinfo param to int
*
* @str - user input string
* @maxset - ?
*
* returns (-1) on error
* returns > 0 on success
*/
static int
sysinfo_param(const char *str, int *maxset)
{
if (!str || !maxset)
return (-1);
*maxset = 4;
if (!strcmp(str, "system_name"))
return IPMI_SYSINFO_HOSTNAME;
else if (!strcmp(str, "primary_os_name"))
return IPMI_SYSINFO_PRIMARY_OS_NAME;
else if (!strcmp(str, "os_name"))
return IPMI_SYSINFO_OS_NAME;
else if (!strcmp(str, "delloem_os_version"))
return IPMI_SYSINFO_DELL_OS_VERSION;
else if (!strcmp(str, "delloem_url")) {
*maxset = 2;
return IPMI_SYSINFO_DELL_URL;
} else if (!strcmp(str, "system_fw_version")) {
return IPMI_SYSINFO_SYSTEM_FW_VERSION;
}
return (-1);
}
/*
* ipmi_mc_getsysinfo() - function processes the IPMI Get System Info command
*
* @intf - ipmi interface
* @param - parameter eg. 0xC0..0xFF = OEM
* @block - number of block parameters
* @set - number of set parameters
* @len - length of buffer
* @buffer - pointer to buffer
*
* returns (-1) on failure
* returns 0 on success
* returns > 0 IPMI code
*/
int
ipmi_mc_getsysinfo(struct ipmi_intf * intf, int param, int block, int set,
int len, void *buffer)
{
uint8_t data[4];
struct ipmi_rs *rsp = NULL;
struct ipmi_rq req = {0};
memset(buffer, 0, len);
memset(data, 0, 4);
req.msg.netfn = IPMI_NETFN_APP;
req.msg.lun = 0;
req.msg.cmd = IPMI_GET_SYS_INFO;
req.msg.data_len = 4;
req.msg.data = data;
if (verbose > 1)
printf("getsysinfo: %.2x/%.2x/%.2x\n", param, block, set);
data[0] = 0; /* get/set */
data[1] = param;
data[2] = block;
data[3] = set;
/*
* Format of get output is:
* u8 param_rev
* u8 selector
* u8 encoding bit[0-3];
* u8 length
* u8 data0[14]
*/
rsp = intf->sendrecv(intf, &req);
if (rsp == NULL)
return (-1);
if (rsp->ccode == 0) {
if (len > rsp->data_len)
len = rsp->data_len;
if (len && buffer)
memcpy(buffer, rsp->data, len);
}
return rsp->ccode;
}
/*
* ipmi_mc_setsysinfo() - function processes the IPMI Set System Info command
*
* @intf - ipmi interface
* @len - length of buffer
* @buffer - pointer to buffer
*
* returns (-1) on failure
* returns 0 on success
* returns > 0 IPMI code
*/
int
ipmi_mc_setsysinfo(struct ipmi_intf * intf, int len, void *buffer)
{
struct ipmi_rs *rsp = NULL;
struct ipmi_rq req = {0};
req.msg.netfn = IPMI_NETFN_APP;
req.msg.lun = 0;
req.msg.cmd = IPMI_SET_SYS_INFO;
req.msg.data_len = len;
req.msg.data = buffer;
/*
* Format of set input:
* u8 param rev
* u8 selector
* u8 data1[16]
*/
rsp = intf->sendrecv(intf, &req);
if (rsp != NULL) {
return rsp->ccode;
}
return -1;
}
static int
ipmi_sysinfo_main(struct ipmi_intf *intf, int argc, char ** argv, int is_set)
{
char *str;
unsigned char infostr[256];
unsigned char paramdata[18];
int len, maxset, param, pos, rc, set;
if (argc == 2 && strcmp(argv[1], "help") == 0) {
printf_sysinfo_usage(1);
return 0;
}
else if (argc < 2 || (is_set == 1 && argc < 3)) {
lprintf(LOG_ERR, "Not enough parameters given.");
printf_sysinfo_usage(1);
return (-1);
}
/* Get Parameters */
if ((param = sysinfo_param(argv[1], &maxset)) < 0) {
lprintf(LOG_ERR, "Invalid mc/bmc %s command: %s", argv[0], argv[1]);
printf_sysinfo_usage(1);
return (-1);
}
rc = 0;
if (is_set != 0) {
str = argv[2];
set = pos = 0;
len = strlen(str);
/* first block holds 14 bytes, all others hold 16 */
if ((len + 2 + 15) / 16 >= maxset)
len = (maxset * 16) - 2;
do {
memset(paramdata, 0, sizeof(paramdata));
paramdata[0] = param;
paramdata[1] = set;
if (set == 0) {
/* First block is special case */
paramdata[2] = 0; /* ascii encoding */
paramdata[3] = len; /* length */
strncpy(paramdata + 4, str + pos, IPMI_SYSINFO_SET0_SIZE);
pos += IPMI_SYSINFO_SET0_SIZE;
}
else {
strncpy(paramdata + 2, str + pos, IPMI_SYSINFO_SETN_SIZE);
pos += IPMI_SYSINFO_SETN_SIZE;
}
rc = ipmi_mc_setsysinfo(intf, 18, paramdata);
if (rc)
break;
set++;
} while (pos < len);
}
else {
memset(infostr, 0, sizeof(infostr));
/* Read blocks of data */
pos = 0;
for (set = 0; set < maxset; set++) {
rc = ipmi_mc_getsysinfo(intf, param, set, 0, 18, paramdata);
if (rc)
break;
if (set == 0) {
/* First block is special case */
if ((paramdata[2] & 0xF) == 0) {
/* Determine max number of blocks to read */
maxset = ((paramdata[3] + 2) + 15) / 16;
}
memcpy(infostr + pos, paramdata + 4, IPMI_SYSINFO_SET0_SIZE);
pos += IPMI_SYSINFO_SET0_SIZE;
}
else {
memcpy(infostr + pos, paramdata + 2, IPMI_SYSINFO_SETN_SIZE);
pos += IPMI_SYSINFO_SETN_SIZE;
}
}
printf("%s\n", infostr);
}
if (rc < 0) {
lprintf(LOG_ERR, "%s %s set %d command failed", argv[0], argv[1], set);
}
else if (rc == 0x80) {
lprintf(LOG_ERR, "%s %s parameter not supported", argv[0], argv[1]);
}
else if (rc > 0) {
lprintf(LOG_ERR, "%s command failed: %s", argv[0],
val2str(rc, completion_code_vals));
}
return rc;
}