# Canonical Zserv route types information registry for Quagga.
#
# Used to construct route_types.c and route_types.h
#
# comma-seperated fields of either 2 fields (help strings) or 7 fields.
# White space before and after the comma seperators is stripped.
# Lines /beginning/ with # are comments.
#
####
# 9 field line has format:
# ZServ route type, canonical name, daemon, route char, ipv4, ipv6, redist, short desc, Restrictions
#
# Zserv route type: Corresponding with zebra.h. Key field.
# canonical name: Typically derived from the route type definition.
# Used in 'redistribute' commands in daemons.
# Key field.
# daemon: The daemon which may originates this route type
# for redistribution to other daemons.
# NULL if not applicable.
# M:N definitions of type:daemon are allowed.
# Used to construct vty command strings.
# route char: Single character to denote the route, if applicable.
# Used to denote route type where space is tight,
# e.g. 'show ip route' / 'show ipv6 route'.
# 'X' is reserved as the 'not needed' placeholder.
# ipv4: IPv4 capable? yes/no, or 1/0.
# ipv6: IPv6 capable? ditto.
# redist: Allow this protocol to be used in redistribution statements
# short desc: Very brief description. Used in header of
# 'show ip route'. May be specified as NULL
# if the canonical name suffices.
# Restriction: If this cannot be used with the listed protocol for redistribution events
#
# Key fields obviously must be a unique ASCII alpha-numeric word.
# Lower-case is required, brevity is optional but highly desirable.
#
####
# 2 field format:
#
# Zserv route type, Long description
#
# Long description: Full description, but should try fit on a line.
####
#
# If you add a new routing protocol here, make sure you also update
# meta_queue_map in zebra_rib.c
#
## type cname daemon C 4 6 Redist short help Restrictions
ZEBRA_ROUTE_SYSTEM, system, NULL, 'X', 0, 0, 0, "Reserved"
ZEBRA_ROUTE_KERNEL, kernel, zebra, 'K', 1, 1, 1, "kernel route"
ZEBRA_ROUTE_CONNECT, connected, zebra, 'C', 1, 1, 1, "connected"
ZEBRA_ROUTE_STATIC, static, zebra, 'S', 1, 1, 1, "static"
ZEBRA_ROUTE_RIP, rip, ripd, 'R', 1, 0, 1, "RIP"
ZEBRA_ROUTE_RIPNG, ripng, ripngd, 'R', 0, 1, 1, "RIPng"
ZEBRA_ROUTE_OSPF, ospf, ospfd, 'O', 1, 0, 1, "OSPF"
ZEBRA_ROUTE_OSPF6, ospf6, ospf6d, 'O', 0, 1, 1, "OSPFv3"
ZEBRA_ROUTE_ISIS, isis, isisd, 'I', 1, 1, 1, "IS-IS"
ZEBRA_ROUTE_BGP, bgp, bgpd, 'B', 1, 1, 1, "BGP"
ZEBRA_ROUTE_PIM, pim, pimd, 'P', 0, 0, 0, "PIM"
ZEBRA_ROUTE_EIGRP, eigrp, eigrpd, 'E', 1, 0, 1, "EIGRP"
ZEBRA_ROUTE_NHRP, nhrp, nhrpd, 'N', 1, 1, 1, "NHRP"
# HSLS and OLSR both are AFI independent (so: 1, 1), however
# we want to disable for them for general Quagga distribution.
# This at least makes it trivial for users of these protocols
# to 'switch on' redist support (direct numeric entry remaining
# possible).
ZEBRA_ROUTE_HSLS, hsls, hslsd, 'H', 0, 0, 0, "HSLS"
ZEBRA_ROUTE_OLSR, olsr, olsrd, 'o', 0, 0, 0, "OLSR"
ZEBRA_ROUTE_TABLE, table, zebra, 'T', 1, 1, 1, "Table"
ZEBRA_ROUTE_LDP, ldp, ldpd, 'L', 0, 0, 0, "LDP"
#vnc when sent to zebra
ZEBRA_ROUTE_VNC, vnc, NULL, 'v', 1, 1, 1, "VNC"
# vnc when sent to bgp
ZEBRA_ROUTE_VNC_DIRECT, vnc-direct,NULL, 'V', 1, 1, 1, "VNC-Direct", bgpd
# vnc when sent to bgp (resolve NVE mode)
ZEBRA_ROUTE_VNC_DIRECT_RH, vnc-rn, NULL, 'V', 0, 0, 0, "VNC-RN"
# bgp unicast -> vnc
ZEBRA_ROUTE_BGP_DIRECT, bgp-direct, NULL, 'b', 0, 0, 0, "BGP-Direct"
# bgp unicast -> vnc
ZEBRA_ROUTE_BGP_DIRECT_EXT, bgp-direct-to-nve-groups, NULL, 'e', 0, 0, 0, "BGP2VNC"
ZEBRA_ROUTE_BABEL, babel, babeld, 'A', 1, 1, 1, "Babel"
ZEBRA_ROUTE_SHARP, sharp, sharpd, 'D', 1, 1, 1, "SHARP"
ZEBRA_ROUTE_PBR, pbr, pbrd, 'F', 1, 1, 0, "PBR"
ZEBRA_ROUTE_BFD, bfd, bfdd, '-', 0, 0, 0, "BFD"
ZEBRA_ROUTE_OPENFABRIC, openfabric, fabricd, 'f', 1, 1, 1, "OpenFabric"
ZEBRA_ROUTE_VRRP, vrrp, vrrpd, '-', 0, 0, 0, "VRRP"
ZEBRA_ROUTE_NHG, nhg, none, '-', 0, 0, 0, "Nexthop Group"
ZEBRA_ROUTE_SRTE, srte, none, '-', 0, 0, 0, "SR-TE"
ZEBRA_ROUTE_ALL, wildcard, none, '-', 0, 0, 0, "-"
## help strings
ZEBRA_ROUTE_SYSTEM, "Reserved route type, for internal use only"
ZEBRA_ROUTE_KERNEL, "Kernel routes (not installed via the zebra RIB)"
ZEBRA_ROUTE_CONNECT,"Connected routes (directly attached subnet or host)"
ZEBRA_ROUTE_STATIC, "Statically configured routes"
ZEBRA_ROUTE_RIP, "Routing Information Protocol (RIP)"
ZEBRA_ROUTE_RIPNG, "Routing Information Protocol next-generation (IPv6) (RIPng)"
ZEBRA_ROUTE_OSPF, "Open Shortest Path First (OSPFv2)"
ZEBRA_ROUTE_OSPF6, "Open Shortest Path First (IPv6) (OSPFv3)"
ZEBRA_ROUTE_ISIS, "Intermediate System to Intermediate System (IS-IS)"
ZEBRA_ROUTE_BGP, "Border Gateway Protocol (BGP)"
ZEBRA_ROUTE_PIM, "Protocol Independent Multicast (PIM)"
ZEBRA_ROUTE_EIGRP, "Enhanced Interior Gateway Routing Protocol (EIGRP)"
ZEBRA_ROUTE_NHRP, "Next Hop Resolution Protocol (NHRP)"
ZEBRA_ROUTE_HSLS, "Hazy-Sighted Link State Protocol (HSLS)"
ZEBRA_ROUTE_VNC, "Virtual Network Control (VNC)"
ZEBRA_ROUTE_OLSR, "Optimised Link State Routing (OLSR)"
ZEBRA_ROUTE_TABLE, "Non-main Kernel Routing Table"
ZEBRA_ROUTE_LDP, "Label Distribution Protocol (LDP)"
ZEBRA_ROUTE_VNC_DIRECT, "VNC direct (not via zebra) routes"
ZEBRA_ROUTE_BABEL, "Babel routing protocol (Babel)"
ZEBRA_ROUTE_SHARP, "Super Happy Advanced Routing Protocol (sharpd)"
ZEBRA_ROUTE_PBR, "Policy Based Routing (PBR)"
ZEBRA_ROUTE_BFD, "Bidirectional Fowarding Detection (BFD)"
ZEBRA_ROUTE_VRRP, "Virtual Router Redundancy Protocol (VRRP)"
ZEBRA_ROUTE_OPENFABRIC, "OpenFabric Routing Protocol"
ZEBRA_ROUTE_NHG, "Zebra Nexthop Groups (NHG)"