m4trace:/usr/share/aclocal/nls.m4:23: -1- AC_DEFUN([AM_NLS], [
AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE([nls],
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT([$USE_NLS])
AC_SUBST([USE_NLS])
])
m4trace:/usr/share/aclocal/po.m4:23: -1- AC_DEFUN([AM_PO_SUBDIRS], [
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
AC_REQUIRE([AC_PROG_SED])dnl
AC_REQUIRE([AM_NLS])dnl
dnl Release version of the gettext macros. This is used to ensure that
dnl the gettext macros and po/Makefile.in.in are in sync.
AC_SUBST([GETTEXT_MACRO_VERSION], [0.19])
dnl Perform the following tests also if --disable-nls has been given,
dnl because they are needed for "make dist" to work.
dnl Search for GNU msgfmt in the PATH.
dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
dnl The second test excludes FreeBSD msgfmt.
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
(if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
:)
AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
dnl Test whether it is GNU msgfmt >= 0.15.
changequote(,)dnl
case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
*) MSGFMT_015=$MSGFMT ;;
esac
changequote([,])dnl
AC_SUBST([MSGFMT_015])
changequote(,)dnl
case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
*) GMSGFMT_015=$GMSGFMT ;;
esac
changequote([,])dnl
AC_SUBST([GMSGFMT_015])
dnl Search for GNU xgettext 0.12 or newer in the PATH.
dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
dnl The second test excludes FreeBSD xgettext.
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
(if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
:)
dnl Remove leftover from FreeBSD xgettext call.
rm -f messages.po
dnl Test whether it is GNU xgettext >= 0.15.
changequote(,)dnl
case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
*) XGETTEXT_015=$XGETTEXT ;;
esac
changequote([,])dnl
AC_SUBST([XGETTEXT_015])
dnl Search for GNU msgmerge 0.11 or newer in the PATH.
AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
[$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
dnl Installation directories.
dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
dnl have to define it here, so that it can be used in po/Makefile.
test -n "$localedir" || localedir='${datadir}/locale'
AC_SUBST([localedir])
dnl Support for AM_XGETTEXT_OPTION.
test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
AC_CONFIG_COMMANDS([po-directories], [[
for ac_file in $CONFIG_FILES; do
# Support "outfile[:infile[:infile...]]"
case "$ac_file" in
*:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
esac
# PO directories have a Makefile.in generated from Makefile.in.in.
case "$ac_file" in */Makefile.in)
# Adjust a relative srcdir.
ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
# In autoconf-2.13 it is called $ac_given_srcdir.
# In autoconf-2.50 it is called $srcdir.
test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
case "$ac_given_srcdir" in
.) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
/*) top_srcdir="$ac_given_srcdir" ;;
*) top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
# Treat a directory as a PO directory if and only if it has a
# POTFILES.in file. This allows packages to have multiple PO
# directories under different names or in different locations.
if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
rm -f "$ac_dir/POTFILES"
test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
gt_tab=`printf '\t'`
cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
POMAKEFILEDEPS="POTFILES.in"
# ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
# on $ac_dir but don't depend on user-specified configuration
# parameters.
if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
# The LINGUAS file contains the set of available languages.
if test -n "$OBSOLETE_ALL_LINGUAS"; then
test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
fi
ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
# Hide the ALL_LINGUAS assignment from automake < 1.5.
eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
else
# The set of available languages was given in configure.in.
# Hide the ALL_LINGUAS assignment from automake < 1.5.
eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
fi
# Compute POFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
# Compute UPDATEPOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
# Compute DUMMYPOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
# Compute GMOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
case "$ac_given_srcdir" in
.) srcdirpre= ;;
*) srcdirpre='$(srcdir)/' ;;
esac
POFILES=
UPDATEPOFILES=
DUMMYPOFILES=
GMOFILES=
for lang in $ALL_LINGUAS; do
POFILES="$POFILES $srcdirpre$lang.po"
UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
done
# CATALOGS depends on both $ac_dir and the user's LINGUAS
# environment variable.
INST_LINGUAS=
if test -n "$ALL_LINGUAS"; then
for presentlang in $ALL_LINGUAS; do
useit=no
if test "%UNSET%" != "$LINGUAS"; then
desiredlanguages="$LINGUAS"
else
desiredlanguages="$ALL_LINGUAS"
fi
for desiredlang in $desiredlanguages; do
# Use the presentlang catalog if desiredlang is
# a. equal to presentlang, or
# b. a variant of presentlang (because in this case,
# presentlang can be used as a fallback for messages
# which are not translated in the desiredlang catalog).
case "$desiredlang" in
"$presentlang"*) useit=yes;;
esac
done
if test $useit = yes; then
INST_LINGUAS="$INST_LINGUAS $presentlang"
fi
done
fi
CATALOGS=
if test -n "$INST_LINGUAS"; then
for lang in $INST_LINGUAS; do
CATALOGS="$CATALOGS $lang.gmo"
done
fi
test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
if test -f "$f"; then
case "$f" in
*.orig | *.bak | *~) ;;
*) cat "$f" >> "$ac_dir/Makefile" ;;
esac
fi
done
fi
;;
esac
done]],
[# Capture the value of obsolete ALL_LINGUAS because we need it to compute
# POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
# from automake < 1.5.
eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
# Capture the value of LINGUAS because we need it to compute CATALOGS.
LINGUAS="${LINGUAS-%UNSET%}"
])
])
m4trace:/usr/share/aclocal/po.m4:220: -1- AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], [
# When this code is run, in config.status, two variables have already been
# set:
# - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
# - LINGUAS is the value of the environment variable LINGUAS at configure
# time.
changequote(,)dnl
# Adjust a relative srcdir.
ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
# In autoconf-2.13 it is called $ac_given_srcdir.
# In autoconf-2.50 it is called $srcdir.
test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
case "$ac_given_srcdir" in
.) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
/*) top_srcdir="$ac_given_srcdir" ;;
*) top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
# Find a way to echo strings without interpreting backslash.
if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
gt_echo='echo'
else
if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
gt_echo='printf %s\n'
else
echo_func () {
cat <<EOT
$*
EOT
}
gt_echo='echo_func'
fi
fi
# A sed script that extracts the value of VARIABLE from a Makefile.
tab=`printf '\t'`
sed_x_variable='
# Test if the hold space is empty.
x
s/P/P/
x
ta
# Yes it was empty. Look if we have the expected variable definition.
/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
# Seen the first line of the variable definition.
s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
ba
}
bd
:a
# Here we are processing a line from the variable definition.
# Remove comment, more precisely replace it with a space.
s/#.*$/ /
# See if the line ends in a backslash.
tb
:b
s/\\$//
# Print the line, without the trailing backslash.
p
tc
# There was no trailing backslash. The end of the variable definition is
# reached. Clear the hold space.
s/^.*$//
x
bd
:c
# A trailing backslash means that the variable definition continues in the
# next line. Put a nonempty string into the hold space to indicate this.
s/^.*$/P/
x
:d
'
changequote([,])dnl
# Set POTFILES to the value of the Makefile variable POTFILES.
sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
# Compute POTFILES_DEPS as
# $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
POTFILES_DEPS=
for file in $POTFILES; do
POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
done
POMAKEFILEDEPS=""
if test -n "$OBSOLETE_ALL_LINGUAS"; then
test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
fi
if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
# The LINGUAS file contains the set of available languages.
ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
else
# Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
fi
# Hide the ALL_LINGUAS assignment from automake < 1.5.
eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
# Compute POFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
# Compute UPDATEPOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
# Compute DUMMYPOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
# Compute GMOFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
# Compute PROPERTIESFILES
# as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
# Compute CLASSFILES
# as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
# Compute QMFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
# Compute MSGFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
# Compute RESOURCESDLLFILES
# as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
case "$ac_given_srcdir" in
.) srcdirpre= ;;
*) srcdirpre='$(srcdir)/' ;;
esac
POFILES=
UPDATEPOFILES=
DUMMYPOFILES=
GMOFILES=
PROPERTIESFILES=
CLASSFILES=
QMFILES=
MSGFILES=
RESOURCESDLLFILES=
for lang in $ALL_LINGUAS; do
POFILES="$POFILES $srcdirpre$lang.po"
UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
QMFILES="$QMFILES $srcdirpre$lang.qm"
frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
done
# CATALOGS depends on both $ac_dir and the user's LINGUAS
# environment variable.
INST_LINGUAS=
if test -n "$ALL_LINGUAS"; then
for presentlang in $ALL_LINGUAS; do
useit=no
if test "%UNSET%" != "$LINGUAS"; then
desiredlanguages="$LINGUAS"
else
desiredlanguages="$ALL_LINGUAS"
fi
for desiredlang in $desiredlanguages; do
# Use the presentlang catalog if desiredlang is
# a. equal to presentlang, or
# b. a variant of presentlang (because in this case,
# presentlang can be used as a fallback for messages
# which are not translated in the desiredlang catalog).
case "$desiredlang" in
"$presentlang"*) useit=yes;;
esac
done
if test $useit = yes; then
INST_LINGUAS="$INST_LINGUAS $presentlang"
fi
done
fi
CATALOGS=
JAVACATALOGS=
QTCATALOGS=
TCLCATALOGS=
CSHARPCATALOGS=
if test -n "$INST_LINGUAS"; then
for lang in $INST_LINGUAS; do
CATALOGS="$CATALOGS $lang.gmo"
JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
QTCATALOGS="$QTCATALOGS $lang.qm"
frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
done
fi
sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
tab=`printf '\t'`
if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
# Add dependencies that cannot be formulated as a simple suffix rule.
for lang in $ALL_LINGUAS; do
frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
cat >> "$ac_file.tmp" <<EOF
$frobbedlang.msg: $lang.po
${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
EOF
done
fi
if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
# Add dependencies that cannot be formulated as a simple suffix rule.
for lang in $ALL_LINGUAS; do
frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
cat >> "$ac_file.tmp" <<EOF
$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
EOF
done
fi
if test -n "$POMAKEFILEDEPS"; then
cat >> "$ac_file.tmp" <<EOF
Makefile: $POMAKEFILEDEPS
EOF
fi
mv "$ac_file.tmp" "$ac_file"
])
m4trace:/usr/share/aclocal/po.m4:443: -1- AC_DEFUN([AM_XGETTEXT_OPTION_INIT], [
XGETTEXT_EXTRA_OPTIONS=
])
m4trace:/usr/share/aclocal/po.m4:449: -1- AC_DEFUN([AM_XGETTEXT_OPTION], [
AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
])
m4trace:/usr/share/aclocal/progtest.m4:25: -1- AC_DEFUN([AM_PATH_PROG_WITH_TEST], [
# Prepare PATH_SEPARATOR.
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
# Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
# contains only /bin. Note that ksh looks also at the FPATH variable,
# so we have to set that as well for the test.
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
&& { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
|| PATH_SEPARATOR=';'
}
fi
# Find out how to test for executable files. Don't use a zero-byte file,
# as systems may use methods other than mode bits to determine executability.
cat >conf$$.file <<_ASEOF
#! /bin/sh
exit 0
_ASEOF
chmod +x conf$$.file
if test -x conf$$.file >/dev/null 2>&1; then
ac_executable_p="test -x"
else
ac_executable_p="test -f"
fi
rm -f conf$$.file
# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL([ac_cv_path_$1],
[case "[$]$1" in
[[\\/]]* | ?:[[\\/]]*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in ifelse([$5], , $PATH, [$5]); do
IFS="$ac_save_IFS"
test -z "$ac_dir" && ac_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
break 2
fi
fi
done
done
IFS="$ac_save_IFS"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
AC_MSG_RESULT([$][$1])
else
AC_MSG_RESULT([no])
fi
AC_SUBST([$1])dnl
])
m4trace:/usr/share/aclocal-1.16/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.16'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
m4_if([$1], [1.16.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
m4trace:/usr/share/aclocal-1.16/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.16.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
m4trace:/usr/share/aclocal-1.16/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
m4trace:/usr/share/aclocal-1.16/cond-if.m4:23: -1- AC_DEFUN([AM_COND_IF], [m4_ifndef([_AM_COND_VALUE_$1],
[m4_fatal([$0: no such condition "$1"])])dnl
_AM_COND_IF([$1])dnl
if test -z "$$1_TRUE"; then :
m4_n([$2])[]dnl
m4_ifval([$3],
[_AM_COND_ELSE([$1])dnl
else
$3
])dnl
_AM_COND_ENDIF([$1])dnl
fi[]dnl
])
m4trace:/usr/share/aclocal-1.16/cond.m4:12: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl
m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
m4trace:/usr/share/aclocal-1.16/depend.m4:26: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
[$1], [CXX], [depcc="$CXX" am_compiler_list=],
[$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
[$1], [UPC], [depcc="$UPC" am_compiler_list=],
[$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
am__universal=false
m4_case([$1], [CC],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac],
[CXX],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac])
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
m4trace:/usr/share/aclocal-1.16/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
m4trace:/usr/share/aclocal-1.16/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
[--enable-dependency-tracking],
[do not reject slow dependency extractors])
AS_HELP_STRING(
[--disable-dependency-tracking],
[speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
m4trace:/usr/share/aclocal-1.16/depout.m4:11: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
# TODO: see whether this extra hack can be removed once we start
# requiring Autoconf 2.70 or later.
AS_CASE([$CONFIG_FILES],
[*\'*], [eval set x "$CONFIG_FILES"],
[*], [set x $CONFIG_FILES])
shift
# Used to flag and report bootstrapping failures.
am_rc=0
for am_mf
do
# Strip MF so we end up with the name of the file.
am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile which includes
# dependency-tracking related rules and includes.
# Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
|| continue
am_dirpart=`AS_DIRNAME(["$am_mf"])`
am_filepart=`AS_BASENAME(["$am_mf"])`
AM_RUN_LOG([cd "$am_dirpart" \
&& sed -e '/# am--include-marker/d' "$am_filepart" \
| $MAKE -f - am--depfiles]) || am_rc=$?
done
if test $am_rc -ne 0; then
AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
for automatic dependency tracking. Try re-running configure with the
'--disable-dependency-tracking' option to at least be able to build
the package (albeit without support for automatic dependency tracking).])
fi
AS_UNSET([am_dirpart])
AS_UNSET([am_filepart])
AS_UNSET([am_mf])
AS_UNSET([am_rc])
rm -f conftest-deps.mk
}
])
m4trace:/usr/share/aclocal-1.16/depout.m4:62: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
m4trace:/usr/share/aclocal-1.16/init.m4:29: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
[$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
[ok:ok],,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target (and possibly the TAP driver). The
# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES([CC])],
[m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES([CXX])],
[m4_define([AC_PROG_CXX],
m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes. So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
cat >&2 <<'END'
Oops!
Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present. This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message. This
can help us improve future automake versions.
END
if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
echo 'Configuration will proceed anyway, since you have set the' >&2
echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
echo >&2
else
cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: <https://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
fi
dnl The trailing newline in this macro's definition is deliberate, for
dnl backward compatibility and to allow trailing 'dnl'-style comments
dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
])
m4trace:/usr/share/aclocal-1.16/init.m4:186: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
m4trace:/usr/share/aclocal-1.16/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
AC_SUBST([install_sh])])
m4trace:/usr/share/aclocal-1.16/lead-dot.m4:10: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
m4trace:/usr/share/aclocal-1.16/make.m4:13: -1- AC_DEFUN([AM_MAKE_INCLUDE], [AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
cat > confinc.mk << 'END'
am__doit:
@echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
am__include="#"
am__quote=
# BSD make does it like this.
echo '.include "confinc.mk" # ignored' > confmf.BSD
# Other make implementations (GNU, Solaris 10, AIX) do it like this.
echo 'include confinc.mk # ignored' > confmf.GNU
_am_result=no
for s in GNU BSD; do
AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
AS_CASE([$?:`cat confinc.out 2>/dev/null`],
['0:this is the am__doit target'],
[AS_CASE([$s],
[BSD], [am__include='.include' am__quote='"'],
[am__include='include' am__quote=''])])
if test "$am__include" != "#"; then
_am_result="yes ($s style)"
break
fi
done
rm -f confinc.* confmf.*
AC_MSG_RESULT([${_am_result}])
AC_SUBST([am__include])])
m4trace:/usr/share/aclocal-1.16/make.m4:42: -1- m4_pattern_allow([^am__quote$])
m4trace:/usr/share/aclocal-1.16/missing.m4:11: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
m4trace:/usr/share/aclocal-1.16/missing.m4:20: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
*)
MISSING="\${SHELL} $am_aux_dir/missing" ;;
esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
fi
])
m4trace:/usr/share/aclocal-1.16/options.m4:11: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
m4trace:/usr/share/aclocal-1.16/options.m4:17: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])])
m4trace:/usr/share/aclocal-1.16/options.m4:23: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
m4trace:/usr/share/aclocal-1.16/options.m4:29: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
m4trace:/usr/share/aclocal-1.16/prog-cc-c-o.m4:12: -1- AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
[whether $CC understands -c and -o together],
[am_cv_prog_cc_c_o],
[AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
# Make sure it works both with $CC and with simple cc.
# Following AC_PROG_CC_C_O, we do the test twice because some
# compilers refuse to overwrite an existing .o file with -o,
# though they will create one.
am_cv_prog_cc_c_o=yes
for am_i in 1 2; do
if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
&& test -f conftest2.$ac_objext; then
: OK
else
am_cv_prog_cc_c_o=no
break
fi
done
rm -f core conftest*
unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
# Losing compiler, so override with the script.
# FIXME: It is wrong to rewrite CC.
# But if we don't then we get into trouble of one sort or another.
# A longer-term fix would be to have automake use am__CC in this case,
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])
m4trace:/usr/share/aclocal-1.16/prog-cc-c-o.m4:47: -1- AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
m4trace:/usr/share/aclocal-1.16/python.m4:35: -1- AC_DEFUN([AM_PATH_PYTHON], [
dnl Find a Python interpreter. Python versions prior to 2.0 are not
dnl supported. (2.0 was released on October 16, 2000).
m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
[python python2 python3 dnl
python3.9 python3.8 python3.7 python3.6 python3.5 python3.4 python3.3 dnl
python3.2 python3.1 python3.0 dnl
python2.7 python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 dnl
python2.0])
AC_ARG_VAR([PYTHON], [the Python interpreter])
m4_if([$1],[],[
dnl No version check is needed.
# Find any Python interpreter.
if test -z "$PYTHON"; then
AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
fi
am_display_PYTHON=python
], [
dnl A version check is needed.
if test -n "$PYTHON"; then
# If the user set $PYTHON, use it and don't search something else.
AC_MSG_CHECKING([whether $PYTHON version is >= $1])
AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
[AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])
AC_MSG_ERROR([Python interpreter is too old])])
am_display_PYTHON=$PYTHON
else
# Otherwise, try each interpreter until we find one that satisfies
# VERSION.
AC_CACHE_CHECK([for a Python interpreter with version >= $1],
[am_cv_pathless_PYTHON],[
for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
test "$am_cv_pathless_PYTHON" = none && break
AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
done])
# Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
if test "$am_cv_pathless_PYTHON" = none; then
PYTHON=:
else
AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
fi
am_display_PYTHON=$am_cv_pathless_PYTHON
fi
])
if test "$PYTHON" = :; then
dnl Run any user-specified action, or abort.
m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
else
dnl Query Python for its version number. Getting [:3] seems to be
dnl the best way to do this; it's what "site.py" does in the standard
dnl library.
AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
[am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
dnl Use the values of $prefix and $exec_prefix for the corresponding
dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX. These are made
dnl distinct variables so they can be overridden if need be. However,
dnl general consensus is that you shouldn't need this ability.
AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])
dnl At times (like when building shared libraries) you may want
dnl to know which OS platform Python thinks this is.
AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
[am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
# Just factor out some code duplication.
am_python_setup_sysconfig="\
import sys
# Prefer sysconfig over distutils.sysconfig, for better compatibility
# with python 3.x. See automake bug#10227.
try:
import sysconfig
except ImportError:
can_use_sysconfig = 0
else:
can_use_sysconfig = 1
# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
# <https://github.com/pypa/virtualenv/issues/118>
try:
from platform import python_implementation
if python_implementation() == 'CPython' and sys.version[[:3]] == '2.7':
can_use_sysconfig = 0
except ImportError:
pass"
dnl Set up 4 directories:
dnl pythondir -- where to install python scripts. This is the
dnl site-packages directory, not the python standard library
dnl directory like in previous automake betas. This behavior
dnl is more consistent with lispdir.m4 for example.
dnl Query distutils for this directory.
AC_CACHE_CHECK([for $am_display_PYTHON script directory],
[am_cv_python_pythondir],
[if test "x$prefix" = xNONE
then
am_py_prefix=$ac_default_prefix
else
am_py_prefix=$prefix
fi
am_cv_python_pythondir=`$PYTHON -c "
$am_python_setup_sysconfig
if can_use_sysconfig:
sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
else:
from distutils import sysconfig
sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
sys.stdout.write(sitedir)"`
case $am_cv_python_pythondir in
$am_py_prefix*)
am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
;;
*)
case $am_py_prefix in
/usr|/System*) ;;
*)
am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
;;
esac
;;
esac
])
AC_SUBST([pythondir], [$am_cv_python_pythondir])
dnl pkgpythondir -- $PACKAGE directory under pythondir. Was
dnl PYTHON_SITE_PACKAGE in previous betas, but this naming is
dnl more consistent with the rest of automake.
AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
dnl pyexecdir -- directory for installing python extension modules
dnl (shared libraries)
dnl Query distutils for this directory.
AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
[am_cv_python_pyexecdir],
[if test "x$exec_prefix" = xNONE
then
am_py_exec_prefix=$am_py_prefix
else
am_py_exec_prefix=$exec_prefix
fi
am_cv_python_pyexecdir=`$PYTHON -c "
$am_python_setup_sysconfig
if can_use_sysconfig:
sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
else:
from distutils import sysconfig
sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
sys.stdout.write(sitedir)"`
case $am_cv_python_pyexecdir in
$am_py_exec_prefix*)
am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
;;
*)
case $am_py_exec_prefix in
/usr|/System*) ;;
*)
am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
;;
esac
;;
esac
])
AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
dnl Run any user-specified action.
$2
fi
])
m4trace:/usr/share/aclocal-1.16/python.m4:232: -1- AC_DEFUN([AM_PYTHON_CHECK_VERSION], [prog="import sys
# split strings by '.' and convert to numeric. Append some zeros
# because we need at least 4 digits for the hex conversion.
# map returns an iterator in Python 3.0 and a list in 2.x
minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
minverhex = 0
# xrange is not present in Python 3.0 and range returns an iterator
for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
sys.exit(sys.hexversion < minverhex)"
AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
m4trace:/usr/share/aclocal-1.16/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
(exit $ac_status); }])
m4trace:/usr/share/aclocal-1.16/sanity.m4:11: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[[\\\"\#\$\&\'\`$am_lf]]*)
AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac
# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
am_has_slept=no
for am_try in 1 2; do
echo "timestamp, slept: $am_has_slept" > conftest.file
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
if test "$[2]" = conftest.file || test $am_try -eq 2; then
break
fi
# Just in case.
sleep 1
am_has_slept=yes
done
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
( sleep 1 ) &
am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
[AC_MSG_CHECKING([that generated files are newer than configure])
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
AC_MSG_RESULT([done])])
rm -f conftest.file
])
m4trace:/usr/share/aclocal-1.16/silent.m4:12: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
[--enable-silent-rules],
[less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
[--disable-silent-rules],
[verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
yes) AM_DEFAULT_VERBOSITY=0;;
no) AM_DEFAULT_VERBOSITY=1;;
*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
[am_cv_make_support_nested_variables],
[if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
am_cv_make_support_nested_variables=yes
else
am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
dnl Using '$V' instead of '$(V)' breaks IRIX make.
AM_V='$(V)'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
AM_V=$AM_DEFAULT_VERBOSITY
AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
m4trace:/usr/share/aclocal-1.16/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
m4trace:/usr/share/aclocal-1.16/substnot.m4:12: -1- AC_DEFUN([_AM_SUBST_NOTMAKE])
m4trace:/usr/share/aclocal-1.16/substnot.m4:17: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
m4trace:/usr/share/aclocal-1.16/tar.m4:23: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
m4_if([$1], [v7],
[am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
[m4_case([$1],
[ustar],
[# The POSIX 1988 'ustar' format is defined with fixed-size fields.
# There is notably a 21 bits limit for the UID and the GID. In fact,
# the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
# and bug#13588).
am_max_uid=2097151 # 2^21 - 1
am_max_gid=$am_max_uid
# The $UID and $GID variables are not portable, so we need to resort
# to the POSIX-mandated id(1) utility. Errors in the 'id' calls
# below are definitely unexpected, so allow the users to see them
# (that is, avoid stderr redirection).
am_uid=`id -u || echo unknown`
am_gid=`id -g || echo unknown`
AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
if test $am_uid -le $am_max_uid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi
AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
if test $am_gid -le $am_max_gid; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
_am_tools=none
fi],
[pax],
[],
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Go ahead even if we have the value already cached. We do so because we
# need to set the values for the 'am__tar' and 'am__untar' variables.
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
for _am_tool in $_am_tools; do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar; do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works.
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
AM_RUN_LOG([cat conftest.dir/file])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
])
m4trace:configure.ac:10: -1- m4_pattern_forbid([^_?A[CHUM]_])
m4trace:configure.ac:10: -1- m4_pattern_forbid([_AC_])
m4trace:configure.ac:10: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
m4trace:configure.ac:10: -1- m4_pattern_allow([^AS_FLAGS$])
m4trace:configure.ac:10: -1- m4_pattern_forbid([^_?m4_])
m4trace:configure.ac:10: -1- m4_pattern_forbid([^dnl$])
m4trace:configure.ac:10: -1- m4_pattern_forbid([^_?AS_])
m4trace:configure.ac:10: -1- m4_pattern_allow([^SHELL$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PATH_SEPARATOR$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^exec_prefix$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^prefix$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^program_transform_name$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^bindir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^sbindir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^libexecdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^datarootdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^datadir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^sysconfdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^sharedstatedir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^localstatedir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^includedir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^oldincludedir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^docdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^infodir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^htmldir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^dvidir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^pdfdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^psdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^libdir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^localedir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^mandir$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^DEFS$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^ECHO_C$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^ECHO_N$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^ECHO_T$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^LIBS$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^build_alias$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^host_alias$])
m4trace:configure.ac:10: -1- m4_pattern_allow([^target_alias$])
m4trace:configure.ac:11: -1- AC_CONFIG_MACRO_DIR([m4])
m4trace:configure.ac:15: -1- AM_INIT_AUTOMAKE([1.11 tar-ustar no-define foreign dist-bzip2 no-dist-gzip])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$])
m4trace:configure.ac:15: -1- AM_SET_CURRENT_AUTOMAKE_VERSION
m4trace:configure.ac:15: -1- AM_AUTOMAKE_VERSION([1.16.1])
m4trace:configure.ac:15: -1- _AM_AUTOCONF_VERSION([2.69])
m4trace:configure.ac:15: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^INSTALL_DATA$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^am__isrc$])
m4trace:configure.ac:15: -1- _AM_SUBST_NOTMAKE([am__isrc])
m4trace:configure.ac:15: -1- m4_pattern_allow([^CYGPATH_W$])
m4trace:configure.ac:15: -1- _AM_SET_OPTIONS([1.11 tar-ustar no-define foreign dist-bzip2 no-dist-gzip])
m4trace:configure.ac:15: -1- _AM_SET_OPTION([1.11])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([1.11])
m4trace:configure.ac:15: -1- _AM_SET_OPTION([tar-ustar])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([tar-ustar])
m4trace:configure.ac:15: -1- _AM_SET_OPTION([no-define])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([no-define])
m4trace:configure.ac:15: -1- _AM_SET_OPTION([foreign])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([foreign])
m4trace:configure.ac:15: -1- _AM_SET_OPTION([dist-bzip2])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([dist-bzip2])
m4trace:configure.ac:15: -1- _AM_SET_OPTION([no-dist-gzip])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([no-dist-gzip])
m4trace:configure.ac:15: -1- m4_pattern_allow([^PACKAGE$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^VERSION$])
m4trace:configure.ac:15: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([no-define])
m4trace:configure.ac:15: -1- AM_SANITY_CHECK
m4trace:configure.ac:15: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
m4trace:configure.ac:15: -1- AM_MISSING_HAS_RUN
m4trace:configure.ac:15: -1- AM_AUX_DIR_EXPAND
m4trace:configure.ac:15: -1- m4_pattern_allow([^ACLOCAL$])
m4trace:configure.ac:15: -1- AM_MISSING_PROG([AUTOCONF], [autoconf])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AUTOCONF$])
m4trace:configure.ac:15: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AUTOMAKE$])
m4trace:configure.ac:15: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AUTOHEADER$])
m4trace:configure.ac:15: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo])
m4trace:configure.ac:15: -1- m4_pattern_allow([^MAKEINFO$])
m4trace:configure.ac:15: -1- AM_PROG_INSTALL_SH
m4trace:configure.ac:15: -1- m4_pattern_allow([^install_sh$])
m4trace:configure.ac:15: -1- AM_PROG_INSTALL_STRIP
m4trace:configure.ac:15: -1- m4_pattern_allow([^STRIP$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^MKDIR_P$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^mkdir_p$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AWK$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^SET_MAKE$])
m4trace:configure.ac:15: -1- AM_SET_LEADING_DOT
m4trace:configure.ac:15: -1- m4_pattern_allow([^am__leading_dot$])
m4trace:configure.ac:15: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([tar-ustar])
m4trace:configure.ac:15: -1- _AM_PROG_TAR([ustar])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AMTAR$])
m4trace:configure.ac:15: -1- AM_RUN_LOG([$_am_tar --version])
m4trace:configure.ac:15: -1- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
m4trace:configure.ac:15: -1- AM_RUN_LOG([$am__untar <conftest.tar])
m4trace:configure.ac:15: -1- AM_RUN_LOG([cat conftest.dir/file])
m4trace:configure.ac:15: -1- m4_pattern_allow([^am__tar$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^am__untar$])
m4trace:configure.ac:15: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES([CC])],
[m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES([CXX])],
[m4_define([AC_PROG_CXX],
m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES([OBJC])],
[m4_define([AC_PROG_OBJC],
m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
[_AM_DEPENDENCIES([OBJCXX])],
[m4_define([AC_PROG_OBJCXX],
m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
m4trace:configure.ac:15: -2- _AM_MANGLE_OPTION([no-dependencies])
m4trace:configure.ac:15: -1- AM_SILENT_RULES
m4trace:configure.ac:15: -1- m4_pattern_allow([^AM_V$])
m4trace:configure.ac:15: -1- AM_SUBST_NOTMAKE([AM_V])
m4trace:configure.ac:15: -1- _AM_SUBST_NOTMAKE([AM_V])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AM_DEFAULT_V$])
m4trace:configure.ac:15: -1- AM_SUBST_NOTMAKE([AM_DEFAULT_V])
m4trace:configure.ac:15: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$])
m4trace:configure.ac:15: -1- m4_pattern_allow([^AM_BACKSLASH$])
m4trace:configure.ac:15: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH])
m4trace:configure.ac:17: -1- m4_pattern_allow([^PACKAGE_RELEASE$])
m4trace:configure.ac:18: -1- m4_pattern_allow([^PACKAGE_RELEASE$])
m4trace:configure.ac:19: -1- m4_pattern_allow([^PACKAGE_TAG$])
m4trace:configure.ac:20: -1- m4_pattern_allow([^PACKAGE_TAG$])
m4trace:configure.ac:23: -1- m4_pattern_allow([^LN_S$])
m4trace:configure.ac:25: -1- m4_pattern_allow([^SED$])
m4trace:configure.ac:26: -1- m4_pattern_allow([^GREP$])
m4trace:configure.ac:27: -1- m4_pattern_allow([^AWK$])
m4trace:configure.ac:28: -1- m4_pattern_allow([^SET_MAKE$])
m4trace:configure.ac:29: -1- AM_PATH_PYTHON
m4trace:configure.ac:29: -1- m4_pattern_allow([^PYTHON$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^PYTHON$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^PYTHON_VERSION$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^PYTHON_PREFIX$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^PYTHON_EXEC_PREFIX$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^PYTHON_PLATFORM$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^pythondir$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^pkgpythondir$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^pyexecdir$])
m4trace:configure.ac:29: -1- m4_pattern_allow([^pkgpyexecdir$])
m4trace:configure.ac:31: -1- m4_pattern_allow([^XSLTPROC$])
m4trace:configure.ac:32: -1- m4_pattern_allow([^KILL$])
m4trace:configure.ac:34: -1- m4_pattern_allow([^MODPROBE$])
m4trace:configure.ac:35: -1- m4_pattern_allow([^RMMOD$])
m4trace:configure.ac:36: -1- m4_pattern_allow([^SYSCTL$])
m4trace:configure.ac:39: -1- m4_pattern_allow([^PODMAN$])
m4trace:configure.ac:47: -1- AM_CONDITIONAL([ENABLE_DOCS], [test x$enable_docs != xno])
m4trace:configure.ac:47: -1- m4_pattern_allow([^ENABLE_DOCS_TRUE$])
m4trace:configure.ac:47: -1- m4_pattern_allow([^ENABLE_DOCS_FALSE$])
m4trace:configure.ac:47: -1- _AM_SUBST_NOTMAKE([ENABLE_DOCS_TRUE])
m4trace:configure.ac:47: -1- _AM_SUBST_NOTMAKE([ENABLE_DOCS_FALSE])
m4trace:configure.ac:48: -1- AM_COND_IF([ENABLE_DOCS], [
JH_CHECK_XML_CATALOG([http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl], [DocBook XSL Stylesheets])
])
m4trace:configure.ac:57: -1- AM_CONDITIONAL([USE_SYSTEMD], [test x$use_systemd = xyes])
m4trace:configure.ac:57: -1- m4_pattern_allow([^USE_SYSTEMD_TRUE$])
m4trace:configure.ac:57: -1- m4_pattern_allow([^USE_SYSTEMD_FALSE$])
m4trace:configure.ac:57: -1- _AM_SUBST_NOTMAKE([USE_SYSTEMD_TRUE])
m4trace:configure.ac:57: -1- _AM_SUBST_NOTMAKE([USE_SYSTEMD_FALSE])
m4trace:configure.ac:58: -1- m4_pattern_allow([^USE_SYSTEMD$])
m4trace:configure.ac:63: -1- AM_CONDITIONAL([INSTALL_SYSCONFIG], [test x$INSTALL_SYSCONFIG = xyes])
m4trace:configure.ac:63: -1- m4_pattern_allow([^INSTALL_SYSCONFIG_TRUE$])
m4trace:configure.ac:63: -1- m4_pattern_allow([^INSTALL_SYSCONFIG_FALSE$])
m4trace:configure.ac:63: -1- _AM_SUBST_NOTMAKE([INSTALL_SYSCONFIG_TRUE])
m4trace:configure.ac:63: -1- _AM_SUBST_NOTMAKE([INSTALL_SYSCONFIG_FALSE])
m4trace:configure.ac:64: -1- m4_pattern_allow([^INSTALL_SYSCONFIG$])
m4trace:configure.ac:69: -1- AM_CONDITIONAL([INSTALL_RPMMACROS], [test x$INSTALL_RPMMACROS = xyes])
m4trace:configure.ac:69: -1- m4_pattern_allow([^INSTALL_RPMMACROS_TRUE$])
m4trace:configure.ac:69: -1- m4_pattern_allow([^INSTALL_RPMMACROS_FALSE$])
m4trace:configure.ac:69: -1- _AM_SUBST_NOTMAKE([INSTALL_RPMMACROS_TRUE])
m4trace:configure.ac:69: -1- _AM_SUBST_NOTMAKE([INSTALL_RPMMACROS_FALSE])
m4trace:configure.ac:70: -1- m4_pattern_allow([^INSTALL_RPMMACROS$])
m4trace:configure.ac:75: -1- m4_pattern_allow([^SYSTEMD_UNITDIR$])
m4trace:configure.ac:80: -1- m4_pattern_allow([^BASHCOMPLETIONDIR$])
m4trace:configure.ac:85: -1- m4_pattern_allow([^ZSHCOMPLETIONDIR$])
m4trace:configure.ac:90: -1- m4_pattern_allow([^IFCFGDIR$])
m4trace:configure.ac:95: -1- m4_pattern_allow([^IPTABLES$])
m4trace:configure.ac:103: -1- m4_pattern_allow([^IPTABLES$])
m4trace:configure.ac:105: -1- m4_pattern_allow([^IPTABLES_RESTORE$])
m4trace:configure.ac:113: -1- m4_pattern_allow([^IPTABLES_RESTORE$])
m4trace:configure.ac:115: -1- m4_pattern_allow([^IP6TABLES$])
m4trace:configure.ac:123: -1- m4_pattern_allow([^IP6TABLES$])
m4trace:configure.ac:125: -1- m4_pattern_allow([^IP6TABLES_RESTORE$])
m4trace:configure.ac:133: -1- m4_pattern_allow([^IP6TABLES_RESTORE$])
m4trace:configure.ac:135: -1- m4_pattern_allow([^EBTABLES$])
m4trace:configure.ac:143: -1- m4_pattern_allow([^EBTABLES$])
m4trace:configure.ac:145: -1- m4_pattern_allow([^EBTABLES_RESTORE$])
m4trace:configure.ac:153: -1- m4_pattern_allow([^EBTABLES_RESTORE$])
m4trace:configure.ac:155: -1- m4_pattern_allow([^IPSET$])
m4trace:configure.ac:163: -1- m4_pattern_allow([^IPSET$])
m4trace:configure.ac:167: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:168: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:171: -1- AM_PO_SUBDIRS
m4trace:configure.ac:171: -1- AM_NLS
m4trace:configure.ac:171: -1- m4_pattern_allow([^USE_NLS$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^GETTEXT_MACRO_VERSION$])
m4trace:configure.ac:171: -1- AM_PATH_PROG_WITH_TEST([MSGFMT], [msgfmt], [$ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
(if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], [:])
m4trace:configure.ac:171: -1- m4_pattern_allow([^MSGFMT$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^GMSGFMT$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^MSGFMT_015$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^GMSGFMT_015$])
m4trace:configure.ac:171: -1- AM_PATH_PROG_WITH_TEST([XGETTEXT], [xgettext], [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
(if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], [:])
m4trace:configure.ac:171: -1- m4_pattern_allow([^XGETTEXT$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^XGETTEXT_015$])
m4trace:configure.ac:171: -1- AM_PATH_PROG_WITH_TEST([MSGMERGE], [msgmerge], [$ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1], [:])
m4trace:configure.ac:171: -1- m4_pattern_allow([^MSGMERGE$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^localedir$])
m4trace:configure.ac:171: -1- m4_pattern_allow([^XGETTEXT_EXTRA_OPTIONS$])
m4trace:configure.ac:200: -1- m4_pattern_allow([^LIB@&t@OBJS$])
m4trace:configure.ac:200: -1- m4_pattern_allow([^LTLIBOBJS$])