# Makefile.in --
#
#	This file is a Makefile for Expect TEA Extension.  If it has the name
#	"Makefile.in" then it is a template for a Makefile;  to generate the
#	actual Makefile, run "./configure", which is a configuration script
#	generated by the "autoconf" program (constructs like "@foo@" will get
#	replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: Makefile.in,v 5.50 2010/09/17 16:49:22 hobbs Exp $

#========================================================================
#========================================================================

# expect must be setuid on crays in order to open ptys (and accordingly,
# you must run this Makefile as root).
# See the FAQ for more info on why this is necessary on Crays.
SETUID = @SETUID@
# SETUID = chmod u+s

LIB_RUNTIME_DIR = $(DESTDIR)@libdir@

# The following Expect scripts are not necessary to have installed as
# commands, but are very useful. Edit out what you don't want
# installed. The INSTALL file describes these and others in more
# detail. Some Make's screw up if you delete all of them because
# SCRIPTS is a target. If this is a problem, just comment out the
# SCRIPTS target itself.

SCRIPTS = timed-run timed-read ftp-rfc autopasswd lpunlock weather \
	passmass rftp kibitz rlogin-cwd xpstat tkpasswd dislocate xkibitz \
	tknewsbiff unbuffer mkpasswd cryptdir decryptdir autoexpect \
	multixterm

# A couple of the scripts have man pages of their own.
# You can delete these too if you don't want'em.

SCRIPTS_MANPAGES = kibitz dislocate xkibitz tknewsbiff unbuffer mkpasswd \
	passmass cryptdir decryptdir autoexpect multixterm


# allow us to handle null list gracefully, "end_of_list" should not exist

SCRIPT_LIST         = $(SCRIPTS) end_of_list
SCRIPT_MANPAGE_LIST = $(SCRIPTS_MANPAGES) end_of_list

# Short directory path where binaries can be found to support #! hack.
# This directory path can be the same as the directory in which the
# binary actually sits except when the path is so long that the #!
# mechanism breaks (usually at 32 characters). The solution is to
# create a directory with a very short name, which consists only of
# symbolic links back to the true binaries. Subtracting two for "#!"
# and a couple more for arguments (typically " -f" or " --") gives you
# 27 characters. Pathnames over this length won't be able to use the
# #! magic. For more info on this, see the execve(2) man page.

SHORT_BINDIR = $(exec_prefix)/bin

#========================================================================
# Nothing of the variables below this line should need to be changed.
# Please check the TARGETS section below to make sure the make targets
# are correct.
#========================================================================

#========================================================================
# The names of the source files is defined in the configure script.
# The object files are used for linking into the final library.
# This will be used when a dist target is added to the Makefile.
# It is not important to specify the directory, as long as it is the
# $(srcdir) or in the generic, win or unix subdirectory.
#========================================================================

PKG_SOURCES	= @PKG_SOURCES@
PKG_OBJECTS	= @PKG_OBJECTS@

PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@

#========================================================================
# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
# this package that need to be installed, if any.
#========================================================================

PKG_TCL_SOURCES = @PKG_TCL_SOURCES@

#========================================================================
# This is a list of public header files to be installed, if any.
#========================================================================

PKG_HEADERS	= @PKG_HEADERS@

#========================================================================
# "PKG_LIB_FILE" refers to the library (dynamic or static as per
# configuration options) composed of the named objects.
#========================================================================

PKG_LIB_FILE	= @PKG_LIB_FILE@
PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@

lib_BINARIES	= $(PKG_LIB_FILE)
bin_BINARIES	= expect
BINARIES	= $(lib_BINARIES) $(bin_BINARIES)

SHELL		= @SHELL@

srcdir		= @srcdir@
prefix		= @prefix@
exec_prefix	= @exec_prefix@

bindir		= @bindir@
libdir		= @libdir@
datadir		= @datadir@
mandir		= @mandir@
includedir	= @includedir@

DESTDIR		=

PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
pkgdatadir	= $(datadir)/$(PKG_DIR)
pkglibdir	= $(libdir)/$(PKG_DIR)
pkgincludedir	= $(includedir)/$(PKG_DIR)

top_builddir	= .

INSTALL		= @INSTALL@
INSTALL_PROGRAM	= @INSTALL_PROGRAM@
INSTALL_DATA	= @INSTALL_DATA@
INSTALL_SCRIPT	= @INSTALL_SCRIPT@

PACKAGE_NAME	= @PACKAGE_NAME@
PACKAGE_VERSION	= @PACKAGE_VERSION@
CC		= @CC@
CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
CFLAGS_WARNING	= @CFLAGS_WARNING@
CLEANFILES	= @CLEANFILES@
EXEEXT		= @EXEEXT@
LDFLAGS_DEFAULT	= @LDFLAGS_DEFAULT@
MAKE_LIB	= @MAKE_LIB@
MAKE_SHARED_LIB	= @MAKE_SHARED_LIB@
MAKE_STATIC_LIB	= @MAKE_STATIC_LIB@
MAKE_STUB_LIB	= @MAKE_STUB_LIB@
OBJEXT		= @OBJEXT@
RANLIB		= @RANLIB@
RANLIB_STUB	= @RANLIB_STUB@
SHLIB_CFLAGS	= @SHLIB_CFLAGS@
SHLIB_LD	= @SHLIB_LD@
SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@
STLIB_LD	= @STLIB_LD@
TCL_DEFS	= @TCL_DEFS@
TCL_BIN_DIR	= @TCL_BIN_DIR@
TCL_SRC_DIR	= @TCL_SRC_DIR@
# Not used, but retained for reference of what libs Tcl required
TCL_LIBS	= @TCL_LIBS@

#========================================================================
# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
# package without installing.  The other environment variables allow us
# to test against an uninstalled Tcl.  Add special env vars that you
# require for testing here (like TCLX_LIBRARY).
#========================================================================

EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
		  @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
		  PATH="$(EXTRA_PATH):$(PATH)" \
		  TCLLIBPATH="$(top_builddir)"
TCLSH_PROG	= @TCLSH_PROG@
TCLSH		= $(TCLSH_ENV) $(TCLSH_PROG)
SHARED_BUILD	= @SHARED_BUILD@

INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@

PKG_CFLAGS	= @PKG_CFLAGS@

# TCL_DEFS is not strictly need here, but if you remove it, then you
# must make sure that configure.in checks for the necessary components
# that your library may use.  TCL_DEFS can actually be a problem if
# you do not compile with a similar machine setup as the Tcl core was
# compiled with.
#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
DEFS		= @DEFS@ $(PKG_CFLAGS)

CONFIG_CLEAN_FILES = Makefile

CPPFLAGS	= @CPPFLAGS@
LIBS		= @PKG_LIBS@ @LIBS@
AR		= @AR@
CFLAGS		= @CFLAGS@
COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

#========================================================================
# Start of user-definable TARGETS section
#========================================================================

#========================================================================
# TEA TARGETS.  Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target inclues executable programs and
# platform-dependent libraries.  Modify these targets so that they install
# the various pieces of your package.  The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================

all: binaries libraries doc

#========================================================================
# The binaries target builds executable programs, Windows .dll's, unix
# shared/static libraries, and any other platform-dependent files.
# The list of targets to build for "binaries:" is specified at the top
# of the Makefile, in the "BINARIES" variable.
#========================================================================

binaries: $(BINARIES) pkgIndex.tcl-hand

libraries:

doc:

install: all install-binaries install-libraries install-doc

install-binaries: binaries install-lib-binaries install-bin-binaries

#========================================================================
# This rule installs platform-independent files, such as header files.
#========================================================================

install-libraries: libraries $(SCRIPTS)
	@mkdir -p $(DESTDIR)$(includedir)
	@echo "Installing header files in $(DESTDIR)$(includedir)"
	@list='$(PKG_HEADERS)'; for i in $$list; do \
	    echo "Installing $(srcdir)/$$i" ; \
	    $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
	done;
# install standalone scripts and their man pages, if requested
	@mkdir -p $(DESTDIR)$(prefix)/bin
	-for i in $(SCRIPT_LIST) ; do \
	  if [ -f $$i ] ; then \
	    $(INSTALL_PROGRAM) $$i $(DESTDIR)$(prefix)/bin/$$i ; \
	    rm -f $$i ; \
	  else true; fi ; \
	done

#========================================================================
# Install documentation.  Unix manpages should go in the $(mandir)
# directory.
#========================================================================

install-doc: doc
	@mkdir -p $(DESTDIR)$(mandir)/man1
	@mkdir -p $(DESTDIR)$(mandir)/man3
	@echo "Installing documentation in $(DESTDIR)$(mandir)"
# install Expect man page
	$(INSTALL_DATA) $(srcdir)/expect.man $(DESTDIR)$(mandir)/man1/expect.1
# install man page for Expect library
	$(INSTALL_DATA) $(srcdir)/libexpect.man $(DESTDIR)$(mandir)/man3/libexpect.3
	-for i in $(SCRIPT_MANPAGE_LIST) ; do \
	  if [ -f $(srcdir)/example/$$i.man ] ; then \
	    $(INSTALL_DATA) $(srcdir)/example/$$i.man $(DESTDIR)$(mandir)/man1/$$i.1 ; \
	  else true; fi ; \
	done

test: binaries libraries
	$(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)

shell: binaries libraries
	@$(TCLSH) $(SCRIPT)

expectshell: binaries libraries
	@$(TCLSH_ENV) expect $(SCRIPT)

gdb:
	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)

depend:

#========================================================================
# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
# mentioned above.  That will ensure that this target is built when you
# run "make binaries".
#
# The $(PKG_OBJECTS) objects are created and linked into the final
# library.  In most cases these object files will correspond to the
# source files above.
#========================================================================

$(PKG_LIB_FILE): $(PKG_OBJECTS)
	-rm -f $(PKG_LIB_FILE)
	${MAKE_LIB}
	$(RANLIB) $(PKG_LIB_FILE)

$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
	-rm -f $(PKG_STUB_LIB_FILE)
	${MAKE_STUB_LIB}
	$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)

#========================================================================
# We need to enumerate the list of .c to .o lines here.
#
# In the following lines, $(srcdir) refers to the toplevel directory
# containing your extension.  If your sources are in a subdirectory,
# you will have to modify the paths to reflect this:
#
# Expect.$(OBJEXT): $(srcdir)/generic/Expect.c
# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/Expect.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the makefile
# to look into these paths when resolving .c to .obj dependencies.
# As necessary, add $(srcdir):$(srcdir)/compat:....
#========================================================================

VPATH = $(srcdir)

.c.@OBJEXT@:
	$(COMPILE) -c `@CYGPATH@ $<` -o $@

#========================================================================
# Create the pkgIndex.tcl file.
# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but
# you may find that you need to customize the package.  If so, either
# modify the -hand version, or create a pkgIndex.tcl.in file and have
# the configure script output the pkgIndex.tcl by editing configure.in.
#========================================================================

pkgIndex.tcl:
	( echo pkg_mkIndex . $(PKG_LIB_FILE) \; exit; ) | $(TCLSH)

pkgIndex.tcl-hand:
	(echo 'if {![package vsatisfies [package provide Tcl] @TCL_VERSION@]} {return}' ; \
	 echo 'package ifneeded Expect $(PACKAGE_VERSION) \
	    [list load [file join $$dir $(PKG_LIB_FILE)]]'\
	) > pkgIndex.tcl

#========================================================================
# Distribution creation
# You may need to tweak this target to make it work correctly.
#========================================================================

TAR		= tar
#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
COMPRESS	= $(TAR) zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
DIST_ROOT	= /tmp/dist
DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)

dist-clean:
	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*

dist: dist-clean doc
	mkdir -p $(DIST_DIR)
	cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
		$(srcdir)/fixline1 \
		$(DIST_DIR)/
	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in

	mkdir $(DIST_DIR)/tclconfig
	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
	   $(srcdir)/tclconfig/config.guess $(srcdir)/tclconfig/config.sub \
		$(DIST_DIR)/tclconfig/
	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
	chmod +x $(DIST_DIR)/tclconfig/install-sh

	cp -p $(srcdir)/*.{c,h,man} $(srcdir)/vgrindefs $(srcdir)/NEWS \
		$(srcdir)/INSTALL $(srcdir)/FAQ $(srcdir)/HISTORY \
		$(DIST_DIR)/
	chmod 664 $(DIST_DIR)/*.{c,h,man}

	-list='demos example generic library tests unix win tests testsuite'; \
	for p in $$list; do \
	    if test -d $(srcdir)/$$p ; then \
		mkdir -p $(DIST_DIR)/$$p; \
		cp -p $(srcdir)/$$p/* $(DIST_DIR)/$$p/; \
	    fi; \
	done
	(cd $(DIST_ROOT); $(COMPRESS);)
	cp $(DIST_ROOT)/$(PKG_DIR).tar.gz $(top_builddir)

$(SCRIPTS):
	$(TCLSH) $(srcdir)/fixline1 $(SHORT_BINDIR) < $(srcdir)/example/$@ > $@

## We cannot use TCL_LIBS below (after TCL_LIB_SPEC) because its
## expansion references the contents of LIBS, which contains linker
## options we cannot use here (and which is what we are replacing in
## the first place).

expect:	exp_main_exp.o $(PKG_LIB_FILE)
	$(CC) \
		@CFLAGS@ \
		@LDFLAGS_DEFAULT@ \
		-o expect exp_main_exp.o \
		@EXP_BUILD_LIB_SPEC@ \
		@TCL_LIB_SPEC@ \
		@TCL_DL_LIBS@ @PKG_LIBS@ @MATH_LIBS@ \
		@TCL_CC_SEARCH_FLAGS@ \
		@EXP_CC_SEARCH_FLAGS@
	$(SETUID) expect

expectk:
	@echo "expectk remove from distribution"
	@echo "use tclsh with package require Tk and Expect"

#========================================================================
# Produce FAQ and homepage
#========================================================================

WEBDIR = /proj/itl/www/div826/subject/expect
VERSION = $(PACKAGE_VERSION)

# create the FAQ in html form
FAQ.html:	FAQ.src FAQ.tcl
	FAQ.src html > FAQ.html

# create the FAQ in text form
FAQ:	FAQ.src FAQ.tcl
	FAQ.src text > FAQ

# generate Expect home page
homepage.html:	homepage.src homepage.tcl expect.tar.gz.md5
	homepage.src > homepage.html

expect.tar.gz.md5:	expect-$(VERSION).tar.gz
	md5 expect-$(VERSION).tar.gz > expect.tar.gz.md5

# install various html docs on our web server
install-html:	FAQ.html homepage.html
	cp homepage.html $(WEBDIR)/index.html
	cp FAQ.html $(WEBDIR)

# HTMLize man pages for examples and push them out to the web server
example-man-pages:
	-for i in $(SCRIPT_MANPAGE_LIST) ; do \
	  if [ -f $(srcdir)/example/$$i.man ] ; then \
	    rman -f HTML $(srcdir)/example/$$i.man > $(srcdir)/example/$$i.man.html ; \
	    cp $(srcdir)/example/$$i.man.html $(FTPDIR)/example ; \
	  else true; fi ; \
	done

#========================================================================
# Push out releases
#========================================================================

FTPDIR = /proj/itl/www/div826/subject/expect

# make a private tar file for myself
tar:	expect-$(VERSION).tar
	mv expect-$(VERSION).tar expect.tar

# make a release and install it on ftp server
# update web page to reflect new version
ftp:	expect-$(VERSION).tar.Z expect-$(VERSION).tar.gz install-html homepage.html
	cp expect-$(VERSION).tar.Z $(FTPDIR)/expect.tar.Z
	cp expect-$(VERSION).tar.gz $(FTPDIR)/expect.tar.gz
	cp expect-$(VERSION).tar.gz $(FTPDIR)/old/expect-$(VERSION).tar.gz
	md5 $(FTPDIR)/expect.tar.gz > expect.tar.gz.md5
	cp HISTORY $(FTPDIR)
	cp README $(FTPDIR)/README.distribution
	cp example/README $(FTPDIR)/example
	cp `pubfile example` $(FTPDIR)/example
	ls -l $(FTPDIR)/expect.tar*
#	delete .Z temp file, still need .gz though for md5 later
	rm expect-$(VERSION).tar*

# make an alpha release and install it on ftp server
alpha:	expect-$(VERSION).tar.Z expect-$(VERSION).tar.gz
	cp expect-$(VERSION).tar.Z $(FTPDIR)/alpha.tar.Z
	cp expect-$(VERSION).tar.gz $(FTPDIR)/alpha.tar.gz
	cp HISTORY $(FTPDIR)
	rm expect-$(VERSION).tar*
	ls -l $(FTPDIR)/alpha.tar*

# make a beta release and install it on ftp server
beta:	expect-$(VERSION).tar.Z expect-$(VERSION).tar.gz
	rm -rf $(FTPDIR)/alpha.tar*
	cp expect-$(VERSION).tar.Z $(FTPDIR)/beta.tar.Z
	cp expect-$(VERSION).tar.gz $(FTPDIR)/beta.tar.gz
	cp HISTORY $(FTPDIR)
	rm expect-$(VERSION).tar*
	ls -l $(FTPDIR)/beta.tar*

expect-$(VERSION).tar: configure
	rm -f ../expect-$(VERSION)
	ln -s `pwd` ../expect-$(VERSION)
	cd ..;tar cvfh $@ `pubfile expect-$(VERSION)`
	mv ../$@ .

expect-$(VERSION).tar.Z:	expect-$(VERSION).tar
	compress -fc expect-$(VERSION).tar > $@

expect-$(VERSION).tar.gz:	expect-$(VERSION).tar
	gzip -fc expect-$(VERSION).tar > $@

#========================================================================
# End of user-definable section
#========================================================================

#========================================================================
# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
# variable in configure.in
#========================================================================

clean:  
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.$(OBJEXT) core *.core
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean: clean
	-rm -f *.tab.c
	-rm -f $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log config.status

#========================================================================
# Install binary object libraries.  On Windows this includes both .dll and
# .lib files.  Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Library files go into the lib directory.
# In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh shell)
#
# You should not have to modify this target.
#========================================================================

install-lib-binaries:
	@mkdir -p $(DESTDIR)$(pkglibdir)
	@list='$(lib_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
	    if test "x$$stub" = "xstub"; then \
		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
	    else \
		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
	    fi; \
	    ext=`echo $$p|sed -e "s/.*\.//"`; \
	    if test "x$$ext" = "xdll"; then \
		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
		if test -f $$lib; then \
		    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
	            $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
		fi; \
	    fi; \
	  fi; \
	done
	@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    destp=`basename $$p`; \
	    echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
	  fi; \
	done
	@if test "x$(SHARED_BUILD)" = "x1"; then \
	    echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
	    $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
	fi

#========================================================================
# Install binary executables (e.g. .exe files and dependent .dll files)
# This is for files that must go in the bin directory (located next to
# wish and tclsh), like dependent .dll files on Windows.
#
# You should not have to modify this target, except to define bin_BINARIES
# above if necessary.
#========================================================================

install-bin-binaries:
	@mkdir -p $(DESTDIR)$(bindir)
	@list='$(bin_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
	  fi; \
	done

.SUFFIXES: .c .$(OBJEXT) .man .n .html

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

uninstall-binaries:
	list='$(lib_BINARIES)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
	done
	list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
	  p=`basename $$p`; \
	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
	done
	list='$(bin_BINARIES)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/$$p; \
	done

#========================================================================
#
# Target to regenerate header files and stub files from the *.decls tables.
#
#========================================================================

genstubs:
	$(TCLSH_PROG)	\
		$(srcdir)/tools/genStubs.tcl $(srcdir)/generic	\
		$(srcdir)/Expect.decls

#========================================================================
#
# Target to check that all exported functions have an entry in the stubs
# tables.
#
#========================================================================

Expect_DECLS = \
	$(srcdir)/expect.decls

checkstubs:
	-@for i in `nm -p $(Expect_LIB_FILE) | awk '$$2 ~ /T/ { print $$3 }' \
		| sort -n`; do \
		match=0; \
		for j in $(Expect_DECLS); do \
		    if [ `grep -c $$i $$j` -gt 0 ]; then \
			match=1; \
		    fi; \
		done; \
		if [ $$match -eq 0 ]; then echo $$i; fi \
	done


.PHONY: all binaries clean depend distclean doc install libraries test chantest

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: