%%
%% multirowii.sty V1.6 version (5-May-2004)
%%
%% Author: Jerry Leichter <jerrold.leichter@smarts.com>
%% Piet van Oostrum <piet@cs.uu.nl>
%%
%% This file may be distributed under the terms of the LaTeX Project Public
%% License, as described in lppl.txt in the base LaTeX distribution.
%% Either version 1 or, at your option, any later version.
%%
%% V1.0 was distributed anonymously, based on a Usenet posting that was
%% not intended for stand-alone use.
%% V1.1 was modified by Piet van Oostrum <piet@cs.uu.nl> to allow it to
%% work without bigstrut.sty.
%% V1.2 was modified by Jerry Leichter for the same goal, but using a
%% different approach which will work properly in conjunction with
%% bigstrut.sty.
%% V1.2a was modified by Piet van Oostrum <piet@cs.uu.nl> to use \vskip
%% instead of \raise in positioning, avoiding making rows too high
%% when the adjustment is large.
%% V1.3 was modified by Piet van Oostrum to work properly in a p{} column
%% (\leavevmode added)
%% V1.4 was modified by Piet van Oostrum to check for the special case that
%% the width is given as an *. In this case the natural
%% width of the text argument will be used and the argument
%% is processed in LR-mode.
%% V1.5 was modified by Piet van Oostrum: Added a % after \hbox{#5}\vfill}.
%% Added \struts around #5 for better vertical positioning.
%% Additional coding for negative value of nrows.
%% V1.6 was modified by Piet van Oostrum: Replace a space by \relax after
%% \advance\@tempdima#4.
%%
% Make an entry that will span multiple rows of a table.
%
% \multirowii[pos]{nrows}[bigstruts]{width}[fixup]{text}
%
% pos specifies the vertical position of text. 'p' at the top of the box,
% 'm' in the middle (default), 'b' at the bottom.
%
% nrows is the number of rows to span. It's up to you to leave the other
% rows empty, or the stuff created by \multirowii will over-write it.
% With a positive value of nrows the spanned colomns are this row and
% (nrows-1) rows below it. With a negative value of nrows they are
% this row and (1-nrows) above it.
%
% bigstruts is mainly used if you've used bigstrut.sty. In that case it
% is the total number of uses of \bigstrut within the rows being
% spanned. Count 2 uses for each \bigstrut, 1 for each \bigstrut[x]
% where x is either t or b. The default is 0.
%
% width is the width to which the text is to be set, or * to indicate that
% the text argument's natural width is to be used.
%
% text is the actual text. If the width was set explicitly, the text will
% be set in a parbox of that width; you can use \\ to force linebreaks
% where you like.
%
% If the width was given as * the text will be set in LR mode. If you
% want a multiline entry in this case you should use a tabular or array
% in the text parameter.
%
% The text is centered vertically within the range spanned by nrows.
%
% fixup is a length used for fine tuning: The text will be raised (or
% lowered, if fixup is negative) by that length above (below) wherever
% it would otherwise have gone.
%
% For example (using both multirowii and bigstrut)
%
% \newcommand{\minitab}[2][l]{\begin{tabular}{#1}#2\end{tabular}}
% \begin{tabular}{|c|c|}
% \hline
% \multirowii{4}{1in}{Common g text} & Column g2a\\
% & Column g2b \\
% & Column g2c \\
% & Column g2d \\
% \hline
% \multirowii{3}[6]*{Common g text} & Column g2a\bigstrut\\\cline{2-2}
% & Column g2b \bigstrut\\\cline{2-2}
% & Column g2c \bigstrut\\
% \hline
% \multirowii{4}[8]{1in}{Common g text} & Column g2a\bigstrut\\\cline{2-2}
% & Column g2b \bigstrut\\\cline{2-2}
% & Column g2c \bigstrut\\\cline{2-2}
% & Column g2d \bigstrut\\
% \hline
% \multirowii{4}*{\minitab[c]{Common \\ g text}} & Column g2a\\
% & Column g2b \\
% & Column g2c \\
% & Column g2d \\
% \hline
% \end{tabular}
%
% If any of the spanned rows are unusually large, or if you're using
% bigstrut.sty and \bigstrut's are used assymetrically about the centerline of
% the spanned rows, the vertical centering may not come out right. Use the
% fixup argument in this case.
%
% Just before "text" is expanded, the \multirowiisetup macro is expanded to
% set up any special environment. Initially, \multirowiisetup contains just
% \raggedright. It can be redefined with \renewcommand.
%
% Bugs: It's just about impossible to deal correctly with descenders. The
% text will be set up centered, but it may then have a baseline that doesn't
% match the baseline of the stuff beside it, in particular if the stuff
% beside it has descenders and "text" does not. This may result in a small
% missalignment. About all that can be done is to do a final touchup on
% "text", using the fixup optional argument. (Hint: If you use a measure
% like .1ex, there's a reasonable chance that the fixup will still be correct
% if you change the point size.)
%
% \multirowii is mainly designed for use with table, as opposed to array,
% environments. It will not work well in an array environment since the lines
% have an extra \jot of space between them which it won't account for. Fixing
% this is difficult in general, and doesn't seem worth it. The bigstruts
% argument can be used to provide a semi-automatic fix: First set
% \bigstrutjot to .5\jot. Then simply repeat nrows as the bigstruts argument.
% This will be close, but probably not exact; you can use the fixup argument
% to refine the result. (If you do this repeatedly, you'll probably want to
% wrap these steps up in a simple macro. Note that the modified \bigstrutjot
% value will not give reasonable results if you have bigstruts and use this
% argument for its intended purpose elsewhere. In that case, you might want
% to set it locally.)
%
% If you use \multirowii with the colortbl package you have to take
% precautions if you want to color the column that has the \multirowii in it.
% colortbl works by coloring each cell separately. So if you use \multirowii
% with a positive nrows value, colortbl will first color the top cell, then
% \multirowii will typeset nrows cells starting with this cell, and later
% colortbl will color the other cells, effectively hiding the text in that
% area. This can be solved by putting the \multirowii is the last row with a
% negative nrows value.
% Example:
%
% \begin{tabular}{l>{\columncolor{yellow}}l}
% aaaa & \\
% cccc & \\
% dddd & \multirowii{-3}*{bbbb}\\
% \end{tabular}
%
\def\multirowiisetup{\raggedright\vskip1pt}
\def\vfillsetup#1{%
\if#1m\let\vfillup=\vfill\let\vfilldn=\vfill\else%
\if#1p\let\vfillup=\relax\let\vfilldn=\vfill\else%
\if#1b\let\vfillup=\vfill\let\vfilldn=\relax\else%
\let\vfillup=\vfill\let\vfilldn=\vfill \fi\fi\fi}
\def\multirowii{\@ifnextchar [{\@multirowiiv}{\vfillsetup{m}\@multirowiim}}
\def\@multirowiiv[#1]{\vfillsetup{#1}\@multirowiim}
\def\@multirowiim#1{\relax\@ifnextchar
[{\@multirowii{#1}}{\@multirowii{#1}[0]}}
\def\@multirowii#1[#2]#3{\@ifnextchar [{\@xmultirowii{#1}[#2]{#3}}%
{\@xmultirowii{#1}[#2]{#3}[0pt]}}
\long\def\@xmultirowii#1[#2]#3[#4]#5{\@tempcnta=#1%
\@tempdima\@tempcnta\ht\@arstrutbox
\advance\@tempdima\@tempcnta\dp\@arstrutbox
\ifnum\@tempcnta<0\@tempdima=-\@tempdima\fi
\advance\@tempdima#2\bigstrutjot
\if*#3\setbox0\vtop to \@tempdima{\vfillup\multirowiisetup
\hbox{\strut#5\strut}\vfilldn}%
\ht0\z@\dp0\z@
\else
\dimen0=#3\relax
\ifdim\dimen0<\z@
\dimen0=-\dimen0
\let\footnotemark\relax
\fi
\setbox0\vbox{\hsize\dimen0\@parboxrestore\multirowiisetup\strut#5\strut}%
\dimen0=\ht0
\advance\dimen0\dp0\relax
\ifdim\dimen0>\@tempdima
\divide\dimen0\@tempcnta
\ifnum\dimen0<0%
\dimen0=-\dimen0
\fi
\ifdim#3<\z@
\setbox0\vbox{}%
\fi
\ht0\dimen0\dp0\z@
\else
\ifdim#3<\z@
\setbox0\vbox{}%
\fi
\setbox0\vtop to \@tempdima{\vfillup\unvbox0\vfilldn}%
\ht0\z@\dp0\z@
\fi
\fi
\ifnum\@tempcnta<0\advance\@tempdima-\dp\@arstrutbox
\else\@tempdima=\ht\@arstrutbox
\ifnum#2>0 \advance\@tempdima\bigstrutjot \fi
\fi
\advance\@tempdima#4\relax\leavevmode\vtop{\vskip-\@tempdima\box0\vss}}
\@ifundefined{bigstrutjot}{\newdimen\bigstrutjot \bigstrutjot\jot}{}