#!/bin/bash
PS4='$LINENO:'
[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".."
CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup
CRYPTSETUP_VALGRIND=../.libs/cryptsetup
CRYPTSETUP_LIB_VALGRIND=../.libs
DEV_NAME=dummy
DEV_NAME2=dummy2
DEV_NAME3=dummy3
ORIG_IMG=luks-test-orig
IMG=luks-test
IMG10=luks-test-v10
HEADER_IMG=luks-header
KEY1=key1
KEY2=key2
KEY5=key5
KEYE=keye
PWD0="compatkey"
PWD1="93R4P4pIqAH8"
PWD2="mymJeD8ivEhE"
PWD3="ocMakf3fAcQO"
PWDW="rUkL4RUryBom"
VK_FILE="compattest_vkfile"
FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000"
LUKS_HEADER="S0-5 S6-7 S8-39 S40-71 S72-103 S104-107 S108-111 R112-131 R132-163 S164-167 S168-207 A0-591"
KEY_SLOT0="S208-211 S212-215 R216-247 A248-251 A251-255"
KEY_MATERIAL0="R4096-68096"
KEY_MATERIAL0_EXT="R4096-68096"
KEY_SLOT1="S256-259 S260-263 R264-295 A296-299 A300-303"
KEY_MATERIAL1="R69632-133632"
KEY_MATERIAL1_EXT="S69632-133632"
KEY_SLOT5="S448-451 S452-455 R456-487 A488-491 A492-495"
KEY_MATERIAL5="R331776-395264"
KEY_MATERIAL5_EXT="S331776-395264"
TEST_UUID="12345678-1234-1234-1234-123456789abc"
LOOPDEV=$(losetup -f 2>/dev/null)
[ -f /etc/system-fips ] && FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null)
function remove_mapping()
{
[ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove --retry $DEV_NAME3 >/dev/null 2>&1
[ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2 >/dev/null 2>&1
[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1
losetup -d $LOOPDEV >/dev/null 2>&1
rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $VK_FILE missing-file >/dev/null 2>&1
rmmod scsi_debug 2> /dev/null
scsi_debug_teardown $DEV
}
function force_uevent()
{
DNAME=$(echo $LOOPDEV | cut -f3 -d /)
echo "change" >/sys/block/$DNAME/uevent
}
function fail()
{
[ -n "$1" ] && echo "$1"
remove_mapping
echo "FAILED backtrace:"
while caller $frame; do ((frame++)); done
exit 2
}
function fips_mode()
{
[ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ]
}
function can_fail_fips()
{
# Ignore this fail if running in FIPS mode
fips_mode || fail $1
}
function skip()
{
[ -n "$1" ] && echo "$1"
remove_mapping
[ -z "$2" ] && exit $2
exit 77
}
function prepare()
{
[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1
case "$2" in
file)
remove_mapping
dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1
sync
;;
wipe)
remove_mapping
dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1
sync
losetup $LOOPDEV $IMG
;;
new)
remove_mapping
xz -cd compatimage.img.xz > $IMG
# FIXME: switch to internal loop (no losetup at all)
echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \
grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped."
losetup $LOOPDEV $IMG
xz -cd compatv10image.img.xz > $IMG10
;;
reuse | *)
if [ ! -e $IMG ]; then
xz -cd compatimage.img.xz > $IMG
losetup $LOOPDEV $IMG
fi
[ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10
;;
esac
if [ ! -e $KEY1 ]; then
#dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1
echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1
echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1
fi
if [ ! -e $KEY2 ]; then
dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1
fi
if [ ! -e $KEY5 ]; then
dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1
fi
if [ ! -e $KEYE ]; then
touch $KEYE
fi
cp $IMG $ORIG_IMG
[ -n "$1" ] && echo "CASE: $1"
}
function check()
{
sync
[ -z "$1" ] && return
./differ $ORIG_IMG $IMG $1 || fail
}
function check_exists()
{
[ -b /dev/mapper/$DEV_NAME ] || fail
check $1
}
# $1 path to scsi debug bdev
scsi_debug_teardown() {
local _tries=15;
while [ -b "$1" -a $_tries -gt 0 ]; do
rmmod scsi_debug 2> /dev/null
if [ -b "$1" ]; then
sleep .1
_tries=$((_tries-1))
fi
done
test ! -b "$1" || rmmod scsi_debug 2> /dev/null
}
function add_scsi_device() {
scsi_debug_teardown $DEV
modprobe scsi_debug $@ delay=0
if [ $? -ne 0 ] ; then
echo "This kernel seems to not support proper scsi_debug module, test skipped."
exit 77
fi
sleep 1
DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /)
[ -b $DEV ] || fail "Cannot find $DEV."
}
function valgrind_setup()
{
which valgrind >/dev/null 2>&1 || fail "Cannot find valgrind."
[ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable."
export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH"
}
function valgrind_run()
{
INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@"
}
export LANG=C
[ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run
# LUKS non-root-tests
if [ $(id -u) != 0 ]; then
$CRYPTSETUP benchmark -c aes-xts-plain64 >/dev/null 2>&1 || \
skip "WARNING: Cannot run test without kernel userspace crypto API, test skipped."
fi
prepare "Image in file tests (root capabilities not required)" file
echo "[1] format"
echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
echo "[2] open"
echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail
# test detached header --test-passphrase
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --header $HEADER_IMG $IMG || fail
echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
rm -f $HEADER_IMG
echo "[3] add key"
echo $PWD1 | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail
echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail
echo -e "$PWD0\n$PWD1" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail
echo "[4] change key"
echo -e "$PWD1\n$PWD0\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG || fail
echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code"
echo "[5] remove key"
# delete active keys PWD0, PWD2
echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksRemove should return EPERM exit code"
echo $PWD0 | $CRYPTSETUP luksRemoveKey $IMG || fail
echo $PWD2 | $CRYPTSETUP luksRemoveKey $IMG || fail
# check if keys were deleted
echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code"
echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code"
echo "[6] kill slot"
# format new luks device with active keys PWD1, PWD2
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail
# deactivate keys by killing slots
$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail
$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: ENABLED" || fail
$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 2: DISABLED" || fail
echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 0 2>/dev/null && fail
echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 0 || fail
$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: DISABLED" || fail
echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 1 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksKill should return EPERM exit code"
echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 1 || fail
$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: DISABLED" || fail
# check if keys were deactivated
echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
echo "[7] header backup"
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail
echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG || fail
echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
echo "[8] header restore"
$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail
echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail
echo "[9] luksDump"
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG $KEY1 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $IMG -d $KEY1 || fail
$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail
$CRYPTSETUP luksDump $IMG | grep -q $TEST_UUID || fail
echo $PWDW | $CRYPTSETUP luksDump $IMG --dump-master-key 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksDump $IMG --dump-master-key | grep -q "MK dump:" || fail
$CRYPTSETUP luksDump -q $IMG --dump-master-key -d $KEY1 | grep -q "MK dump:" || fail
echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-master-key --master-key-file $VK_FILE >/dev/null || fail
echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-master-key --master-key-file $VK_FILE 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --master-key-file $VK_FILE $IMG || fail
echo "[10] uuid"
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG || fail
$CRYPTSETUP -q luksUUID $IMG | grep -q $TEST_UUID || fail
[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped."
[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped."
# LUKS root-tests
prepare "[1] open - compat image - acceptance check" new
echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
check_exists
ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ')
[ "$ORG_SHA1" = 676062b66ebf36669dab705442ea0762dfc091b0 ] || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# Check it can be opened from header backup as well
$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail
echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail
check_exists
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# Check restore
$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail
# Repeat for V1.0 header - not aligned first keyslot
echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME || fail
check_exists
ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ')
[ "$ORG_SHA1" = 51b48c2471a7593ceaf14dc5e66bca86ed05f6cc ] || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
rm -f $HEADER_IMG
$CRYPTSETUP luksHeaderBackup $IMG10 --header-backup-file $HEADER_IMG
echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail
check_exists
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[2] open - compat image - denial check" new
echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
echo $PWDW | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME 2>/dev/null && fail
check
# All headers items and first key material section must change
prepare "[3] format" wipe
echo $PWD1 | $CRYPTSETUP -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail
check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
prepare "[4] format using hash sha512" wipe
echo $PWD1 | $CRYPTSETUP -i 1000 -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail
check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
prepare "[5] open"
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail
echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
check_exists
# Key Slot 1 and key material section 1 must change, the rest must not.
prepare "[6] add key"
echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV || fail
check "$KEY_SLOT1 $KEY_MATERIAL1"
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
# Unsuccessful Key Delete - nothing may change
prepare "[7] unsuccessful delete"
echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail
$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail
$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail
check
# Delete Key Test
# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[8] successful delete"
$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
check "$KEY_SLOT1 $KEY_MATERIAL1_EXT"
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[9] add key test for key files"
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail
check "$KEY_SLOT1 $KEY_MATERIAL1"
$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[10] delete key test with key1 as remaining key"
$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail
check "$KEY_SLOT0 $KEY_MATERIAL0_EXT"
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
# Delete last slot
prepare "[11] delete last key" wipe
echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail
echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
# Format test for ESSIV, and some other parameters.
prepare "[12] parameter variation test" wipe
$CRYPTSETUP -q -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV $KEY1 || fail
check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
prepare "[13] open/close - stacked devices" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[14] format/open - passphrase on stdin & new line" wipe
# stdin defined by "-" must take even newline
#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks1 $LOOPDEV || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
# now also try --key-file
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV --key-file=- || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# process newline if from stdin
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV || fail
echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[15] UUID - use and report provided UUID" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid blah $LOOPDEV 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV || fail
tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
[ "$tst"x = "$TEST_UUID"x ] || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail
$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail
tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
[ "$tst"x = "$TEST_UUID"x ] || fail
prepare "[16] luksFormat" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --master-key-file /dev/urandom $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --master-key-file /dev/urandom $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --master-key-file /dev/urandom -s 256 --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# open by UUID
force_uevent # some systems do not update loop by-uuid
$CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# empty keyfile
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEYE || fail
$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# open by volume key
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 256 --master-key-file $KEY1 $LOOPDEV || fail
$CRYPTSETUP luksOpen --master-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen --master-key-file $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# unsupported pe-keyslot encryption
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-cipher "aes-cbc-plain" $LOOPDEV 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-key-size 256 $LOOPDEV 2>/dev/null && fail
prepare "[17] AddKey volume key, passphrase and keyfile" wipe
# masterkey
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 3 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
echo $PWD2 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 4 || fail
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail
echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/null --key-slot 5 2>/dev/null && fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 5 $KEY1 || fail
$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
# special "-" handling
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail
$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail
# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail
# keyfile/keyfile
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail
$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail
# passphrase/keyfile
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail
# passphrase/passphrase
echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
# keyfile/passphrase
echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 3 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail
prepare "[18] RemoveKey passphrase and keyfile" reuse
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 3 2>/dev/null || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: DISABLED" || fail
# if password or keyfile is provided, batch mode must not suppress it
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail
# kill slot using passphrase from 1
echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: DISABLED" || fail
# kill slot with redirected stdin
$CRYPTSETUP luksKillSlot $LOOPDEV 3 </dev/null 2>/dev/null || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail
# remove key0 / slot 0
echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail
# last keyslot, in batch mode no passphrase needed...
$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
prepare "[19] create & status & resize" wipe
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail
$CRYPTSETUP -q status $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "mode:" | grep -q "readonly" || fail
$CRYPTSETUP -q resize $DEV_NAME --size 100 || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "19997 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME --device-size 1M || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME --device-size 512k --size 1023 >/dev/null 2>&1 && fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME --device-size 513 >/dev/null 2>&1 && fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
# Resize underlying loop device as well
truncate -s 16M $IMG || fail
$CRYPTSETUP -q resize $DEV_NAME || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "32765 sectors" || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP -q status $DEV_NAME >/dev/null && fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 --size 100 $LOOPDEV || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
# 4k sector resize (if kernel supports it)
echo $PWD1 | $CRYPTSETUP -q open --type plain $LOOPDEV $DEV_NAME --sector-size 4096 --size 8 >/dev/null 2>&1
if [ $? -eq 0 ] ; then
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "8 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME --size 16 || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME --size 9 2>/dev/null && fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME --device-size 4608 2>/dev/null && fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
fi
# Resize not aligned to logical block size
add_scsi_device dev_size_mb=32 sector_size=4096
echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $DEV || fail
OLD_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/')
$CRYPTSETUP resize $DEV_NAME -b 7 2> /dev/null && fail
dmsetup info $DEV_NAME | grep -q SUSPENDED && fail
NEW_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/')
test $OLD_SIZE -eq $NEW_SIZE || fail
$CRYPTSETUP close $DEV_NAME || fail
# Add check for unaligned plain crypt activation
echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $DEV -b 7 2>/dev/null && fail
$CRYPTSETUP status $DEV_NAME >/dev/null 2>&1 && fail
# verify is ignored on non-tty input
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --verify-passphrase 2>/dev/null || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 -l -1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d blah 2>/dev/null && fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d /dev/urandom || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
prepare "[20] Disallow open/create if already mapped." wipe
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV 2>/dev/null && fail
$CRYPTSETUP remove $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail
$CRYPTSETUP luksClose $DEV_NAME || fail
prepare "[21] luksDump" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail
echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key | grep -q "MK dump:" || fail
$CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key -d $KEY1 | grep -q "MK dump:" || fail
echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE > /dev/null || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --master-key-file $VK_FILE $LOOPDEV || fail
prepare "[22] remove disappeared device" wipe
dmsetup create $DEV_NAME --table "0 5000 linear $LOOPDEV 2" || fail
echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
# underlying device now returns error but node is still present
dmsetup load $DEV_NAME --table "0 5000 error" || fail
dmsetup resume $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
dmsetup remove --retry $DEV_NAME || fail
prepare "[23] ChangeKey passphrase and keyfile" wipe
# [0]$KEY1 [1]key0
$CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail
# keyfile [0] / keyfile [0]
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail
# passphrase [1] / passphrase [1]
echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail
# keyfile [0] / keyfile [new]
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail
# passphrase [1] / passphrase [new]
echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
# use all slots
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
# still allows replace
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail
prepare "[24] Keyfile limit" wipe
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail
$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l -1 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail
$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail
$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail
$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail
# -l is ignored for stdin if _only_ passphrase is used
echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail
# this is stupid, but expected
echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail
echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail
echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail
# offset
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail
$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail
$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
# large device with keyfile
echo -e '0 10000000 error'\\n'10000000 1000000 zero' | dmsetup create $DEV_NAME2 || fail
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV /dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 || fail
$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5119999999 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d /dev/mapper/$DEV_NAME2 \
--keyfile-offset 5120000000 -l 13 /dev/mapper/$DEV_NAME2 --new-keyfile-offset 5120000001 --new-keyfile-size 15 || fail
dmsetup remove --retry $DEV_NAME2
prepare "[25] Create shared segments" wipe
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --offset 0 --size 256 || fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 --shared || fail
$CRYPTSETUP -q remove $DEV_NAME2 || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
prepare "[26] Suspend/Resume" wipe
# only LUKS is supported
echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
# LUKS
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksSuspend $DEV_NAME || fail
$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
$CRYPTSETUP -q resize $DEV_NAME 2>/dev/null && fail
echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksResume should return EPERM exit code"
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[27] luksOpen with specified key slot number" wipe
# first, let's try passphrase option
echo $PWD3 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT -S 5 $LOOPDEV || fail
check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5
echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail
check_exists
$CRYPTSETUP luksClose $DEV_NAME || fail
echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail
check $LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0
echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
# second, try it with keyfiles
$CRYPTSETUP luksFormat --type luks1 -q -S 5 -d $KEY5 $LOOPDEV || fail
check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
check $LUKS_HEADER $KEY_SLOT1 $KEY_MATERIAL1
$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail
check_exists
$CRYPTSETUP luksClose $DEV_NAME || fail
$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
prepare "[28] Detached LUKS header" wipe
echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG || fail
echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 --offset 8192 >/dev/null 2>&1 && fail
truncate -s 4096 $HEADER_IMG
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG -S7 >/dev/null 2>&1 || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 80000 >/dev/null 2>&1 || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 8192 || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 0 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV-missing --header $HEADER_IMG $DEV_NAME 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
$CRYPTSETUP -q resize $DEV_NAME --size 100 --header $HEADER_IMG || fail
$CRYPTSETUP -q status $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "type:" | grep -q "n/a" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
$CRYPTSETUP luksSuspend $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME && fail
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail
$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: ENABLED" || fail
$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail
$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: DISABLED" || fail
echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
prepare "[29] Repair metadata" wipe
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 || fail
# second sector overwrite should corrupt keyslot 6+7
dd if=/dev/urandom of=$LOOPDEV bs=512 seek=1 count=1 >/dev/null 2>&1
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME >/dev/null 2>&1 && fail
$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
prepare "[30] LUKS erase" wipe
$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY5 --key-slot 5 || fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
$CRYPTSETUP luksErase -q $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: DISABLED" || fail
prepare "[31] Deferred removal of device" wipe
echo $PWD1 | $CRYPTSETUP open --type plain --hash sha256 $LOOPDEV $DEV_NAME || fail
echo $PWD2 | $CRYPTSETUP open --type plain --hash sha256 /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
$CRYPTSETUP close $DEV_NAME >/dev/null 2>&1 && fail
$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail
$CRYPTSETUP close --deferred $DEV_NAME >/dev/null 2>&1
if [ $? -eq 0 ] ; then
dmsetup info $DEV_NAME | grep -q "DEFERRED REMOVE" || fail
$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail
$CRYPTSETUP close $DEV_NAME2 || fail
$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 && fail
else
$CRYPTSETUP close $DEV_NAME2 >/dev/null 2>&1
$CRYPTSETUP close $DEV_NAME >/dev/null 2>&1
fi
# Interactive tests
# Do not remove sleep 0.1 below, the password query flushes TTY buffer (so the code is racy).
which expect >/dev/null 2>&1 || skip "WARNING: expect tool missing, interactive test will be skipped." 0
prepare "[32] Interactive password retry from terminal." new
EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/")
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksOpen -v -T 2 $LOOPDEV $DEV_NAME
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0 x\n"
expect timeout abort "No key available with this passphrase."
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Key slot 0 unlocked."
expect timeout abort "Command successful."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
check_exists
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[33] Interactive unsuccessful password retry from terminal." new
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksOpen -v -T 2 $LOOPDEV $DEV_NAME
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0 x\n"
expect timeout abort "No key available with this passphrase."
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0 y\n"
expect timeout abort "No key available with this passphrase."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
prepare "[34] Interactive kill of last key slot." new
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksKillSlot -v $LOOPDEV 0
expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
send "YES\n"
expect timeout abort "Enter any remaining passphrase:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksKillSlot -v $LOOPDEV 0
expect timeout abort "Keyslot 0 is not active."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
prepare "[35] Interactive format of device." wipe
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
send "YES\n"
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Verify passphrase:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksOpen -v $LOOPDEV --test-passphrase
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Command successful."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
prepare "[36] Interactive unsuccessful format of device." new
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP erase -v $LOOPDEV
expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
send "YES\n"
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
send "YES\n"
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Verify passphrase:"
sleep 0.1
send "$PWD0 x\n"
expect timeout abort "Passphrases do not match."
expect timeout abort eof
eval spawn $CRYPTSETUP luksOpen -v $LOOPDEV -T 1 --test-passphrase
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "No usable keyslot is available."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
prepare "[37] Interactive add key." new
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksAddKey -S 2 $FAST_PBKDF_OPT -v $LOOPDEV
expect timeout abort "Enter any existing passphrase:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Enter new passphrase for key slot:"
sleep 0.1
send "$PWD1\n"
expect timeout abort "Verify passphrase:"
sleep 0.1
send "$PWD1\n"
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksOpen $FAST_PBKDF_OPT -v $LOOPDEV --test-passphrase
expect timeout abort "Enter passphrase"
sleep 0.1
send "$PWD1\n"
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksKillSlot -v $LOOPDEV 1
expect timeout abort "Keyslot 1 is not active."
expect timeout abort eof
eval spawn $CRYPTSETUP luksKillSlot -v $LOOPDEV 2
expect timeout abort "Enter any remaining passphrase:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Key slot 2 removed."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
prepare "[38] Interactive change key." new
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT -v $LOOPDEV
expect timeout abort "Enter passphrase to be changed:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Enter new passphrase:"
sleep 0.1
send "$PWD1\n"
expect timeout abort "Verify passphrase:"
sleep 0.1
send "$PWD1\n"
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksOpen -v $LOOPDEV --test-passphrase
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD1\n"
expect timeout abort "Command successful."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
prepare "[39] Interactive suspend and resume." new
echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
expect - >/dev/null <<EOF
proc abort {} { send_error "Timeout. "; exit 2 }
set timeout 10
eval spawn $CRYPTSETUP luksSuspend -v $DEV_NAME
expect timeout abort "Command successful."
expect timeout abort eof
eval spawn $CRYPTSETUP luksResume -v -T 3 $DEV_NAME
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0 x\n"
expect timeout abort "No key available with this passphrase."
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD1\n"
expect timeout abort "No key available with this passphrase."
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0 y\n"
expect timeout abort "No key available with this passphrase."
expect timeout abort eof
eval spawn $CRYPTSETUP luksResume -v $DEV_NAME
expect timeout abort "Enter passphrase for $EXPECT_DEV:"
sleep 0.1
send "$PWD0\n"
expect timeout abort "Command successful."
expect timeout abort eof
exit
EOF
[ $? -eq 0 ] || fail "Expect script failed."
$CRYPTSETUP remove $DEV_NAME || fail
remove_mapping
exit 0