/* @(#)scsierrs.c 2.29 04/06/17 Copyright 1987-1996 J. Schilling */
#ifndef lint
static char sccsid[] =
"@(#)scsierrs.c 2.29 04/06/17 Copyright 1987-1996 J. Schilling";
#endif
/*
* Error printing for scsitransp.c
*
* Copyright (c) 1987-1996 J. Schilling
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; see the file COPYING. If not, write to the Free Software
* Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <mconfig.h>
#include <stdio.h>
#include <unixstd.h> /* for sys/types.h needed in schily.h for sprintf() */
#include <standard.h>
#include <schily.h>
#include <scg/scsireg.h>
#include <scg/scsidefs.h>
#include <scg/scgcmd.h> /*XXX JS wird eigentlich nicht benoetigt!! */
/*XXX JS kommt weg, wenn struct sense und status */
/*XXX JS von scgio.h nach scsireg.h kommen */
#include <scg/scsitransp.h>
#define CTYPE_CCS 0
#define CTYPE_MD21 1
#define CTYPE_ACB4000 2
#define CTYPE_SMO_C501 3
#define SMO_C501
EXPORT const char *scg_sensemsg __PR((int, int, int,
const char **, char *, int maxcnt));
EXPORT int scg__errmsg __PR((SCSI *scgp, char *obuf, int maxcnt,
struct scsi_sense *,
struct scsi_status *,
int));
/*
* Map old non extended sense to sense key.
*/
static Uchar sd_adaptec_keys[] = {
0, 4, 4, 4, 2, 2, 4, 4, /* 0x00-0x07 */
4, 4, 4, 4, 4, 4, 4, 4, /* 0x08-0x0f */
4, 3, 3, 3, 3, 4, 3, 1, /* 0x10-0x17 */
1, 1, 3, 4, 3, 4, 3, 3, /* 0x18-0x1f */
5, 5, 5, 5, 5, 5, 5, 7, /* 0x20-0x27 */
6, 6, 6, 5, 4,11,11,11 /* 0x28-0x2f */
};
#define MAX_ADAPTEC_KEYS (sizeof (sd_adaptec_keys))
/*
* Deviations to CCS found on old pre CCS devices
*/
static const char *sd_adaptec_error_str[] = {
"\031\000ECC error during verify", /* 0x19 */
"\032\000interleave error", /* 0x1a */
"\034\000bad format on drive", /* 0x1c */
"\035\000self test failed", /* 0x1d */
"\036\000defective track", /* 0x1e */
"\043\000volume overflow", /* 0x23 */
"\053\000set limit violation", /* 0x2b */
"\054\000error counter overflow", /* 0x2c */
"\055\000initiator detected error", /* 0x2d */
"\056\000scsi parity error", /* 0x2e */
"\057\000adapter parity error", /* 0x2f */
NULL
};
/*
* The sense codes of SCSI-1/CCS, SCSI-2 and SCSI-3 devices.
*/
static const char *sd_ccs_error_str[] = {
"\000\000no additional sense information", /* 00 00 */
"\000\001filemark detected", /* 00 01 */
"\000\002end-of-partition/medium detected", /* 00 02 */
"\000\003setmark detected", /* 00 03 */
"\000\004beginning-of-partition/medium detected", /* 00 04 */
"\000\005end-of-data detected", /* 00 05 */
"\000\006i/o process terminated", /* 00 06 */
"\000\021audio play operation in progress", /* 00 11 */
"\000\022audio play operation paused", /* 00 12 */
"\000\023audio play operation successfully completed", /* 00 13 */
"\000\024audio play operation stopped due to error", /* 00 14 */
"\000\025no current audio status to return", /* 00 15 */
"\000\026operation in progress", /* 00 16 */
"\000\027cleaning requested", /* 00 17 */
"\001\000no index/sector signal", /* 01 00 */
"\002\000no seek complete", /* 02 00 */
"\003\000peripheral device write fault", /* 03 00 */
"\003\001no write current", /* 03 01 */
"\003\002excessive write errors", /* 03 02 */
"\004\000logical unit not ready, cause not reportable", /* 04 00 */
"\004\001logical unit is in process of becoming ready", /* 04 01 */
"\004\002logical unit not ready, initializing cmd. required", /* 04 02 */
"\004\003logical unit not ready, manual intervention required", /* 04 03 */
"\004\004logical unit not ready, format in progress", /* 04 04 */
"\004\005logical unit not ready, rebuild in progress", /* 04 05 */
"\004\006logical unit not ready, recalculation in progress", /* 04 06 */
"\004\007logical unit not ready, operation in progress",/* 04 07 */
"\004\010logical unit not ready, long write in progress", /* 04 08 */
"\004\011logical unit not ready, self-test in progress",/* 04 09 */
"\004\012asymmetric access code 3 (00-232) [proposed]", /* 04 0A */
"\004\013asymmetric access code 1 (00-232) [proposed]", /* 04 0B */
"\004\014asymmetric access code 2 (00-232) [proposed]", /* 04 0C */
"\004\020auxiliary memory code 2 (99-148) [proposed]", /* 04 10 */
"\005\000logical unit does not respond to selection", /* 05 00 */
"\006\000no reference position found", /* 06 00 */
"\007\000multiple peripheral devices selected", /* 07 00 */
"\010\000logical unit communication failure", /* 08 00 */
"\010\001logical unit communication time-out", /* 08 01 */
"\010\002logical unit communication parity error", /* 08 02 */
"\010\003logical unit communication crc error (ultra-dma/32)", /* 08 03 */
"\010\004unreachable copy target", /* 08 04 */
"\011\000track following error", /* 09 00 */
"\011\001tracking servo failure", /* 09 01 */
"\011\002focus servo failure", /* 09 02 */
"\011\003spindle servo failure", /* 09 03 */
"\011\004head select fault", /* 09 04 */
"\012\000error log overflow", /* 0A 00 */
"\013\000warning", /* 0B 00 */
"\013\001warning - specified temperature exceeded", /* 0B 01 */
"\013\002warning - enclosure degraded", /* 0B 02 */
"\014\000write error", /* 0C 00 */
"\014\001write error - recovered with auto reallocation", /* 0C 01 */
"\014\002write error - auto reallocation failed", /* 0C 02 */
"\014\003write error - recommend reassignment", /* 0C 03 */
"\014\004compression check miscompare error", /* 0C 04 */
"\014\005data expansion occurred during compression", /* 0C 05 */
"\014\006block not compressible", /* 0C 06 */
"\014\007write error - recovery needed", /* 0C 07 */
"\014\010write error - recovery failed", /* 0C 08 */
"\014\011write error - loss of streaming", /* 0C 09 */
"\014\012write error - padding blocks added", /* 0C 0A */
"\014\013auxiliary memory code 4 (99-148) [proposed]", /* 0C 0B */
"\015\000error detected by third party temporary initiator", /* 0D 00 */
"\015\001third party device failure", /* 0D 01 */
"\015\002copy target device not reachable", /* 0D 02 */
"\015\003incorrect copy target device type", /* 0D 03 */
"\015\004copy target device data underrun", /* 0D 04 */
"\015\005copy target device data overrun", /* 0D 05 */
#ifdef __used__
"\016\000", /* 0E 00 */
"\017\000", /* 0F 00 */
#endif
"\020\000id crc or ecc error", /* 10 00 */
"\021\000unrecovered read error", /* 11 00 */
"\021\001read retries exhausted", /* 11 01 */
"\021\002error too long to correct", /* 11 02 */
"\021\003multiple read errors", /* 11 03 */
"\021\004unrecovered read error - auto reallocate failed", /* 11 04 */
"\021\005l-ec uncorrectable error", /* 11 05 */
"\021\006circ unrecovered error", /* 11 06 */
"\021\007data re-synchronization error", /* 11 07 */
"\021\010incomplete block read", /* 11 08 */
"\021\011no gap found", /* 11 09 */
"\021\012miscorrected error", /* 11 0A */
"\021\013unrecovered read error - recommend reassignment", /* 11 0B */
"\021\014unrecovered read error - recommend rewrite the data", /* 11 0C */
"\021\015de-compression crc error", /* 11 0D */
"\021\016cannot decompress using declared algorithm", /* 11 0E */
"\021\017error reading upc/ean number", /* 11 0F */
"\021\020error reading isrc number", /* 11 10 */
"\021\021read error - loss of streaming", /* 11 11 */
"\021\022auxiliary memory code 3 (99-148) [proposed]", /* 11 12 */
"\022\000address mark not found for id field", /* 12 00 */
"\023\000address mark not found for data field", /* 13 00 */
"\024\000recorded entity not found", /* 14 00 */
"\024\001record not found", /* 14 01 */
"\024\002filemark or setmark not found", /* 14 02 */
"\024\003end-of-data not found", /* 14 03 */
"\024\004block sequence error", /* 14 04 */
"\024\005record not found - recommend reassignment", /* 14 05 */
"\024\006record not found - data auto-reallocated", /* 14 06 */
"\025\000random positioning error", /* 15 00 */
"\025\001mechanical positioning error", /* 15 01 */
"\025\002positioning error detected by read of medium", /* 15 02 */
"\026\000data synchronization mark error", /* 16 00 */
"\026\001data sync error - data rewritten", /* 16 01 */
"\026\002data sync error - recommend rewrite", /* 16 02 */
"\026\003data sync error - data auto-reallocated", /* 16 03 */
"\026\004data sync error - recommend reassignment", /* 16 04 */
"\027\000recovered data with no error correction applied", /* 17 00 */
"\027\001recovered data with retries", /* 17 01 */
"\027\002recovered data with positive head offset", /* 17 02 */
"\027\003recovered data with negative head offset", /* 17 03 */
"\027\004recovered data with retries and/or circ applied", /* 17 04 */
"\027\005recovered data using previous sector id", /* 17 05 */
"\027\006recovered data without ecc - data auto-reallocated", /* 17 06 */
"\027\007recovered data without ecc - recommend reassignment", /* 17 07 */
"\027\010recovered data without ecc - recommend rewrite", /* 17 08 */
"\027\011recovered data without ecc - data rewritten", /* 17 09 */
"\030\000recovered data with error correction applied", /* 18 00 */
"\030\001recovered data with error corr. & retries applied", /* 18 01 */
"\030\002recovered data - data auto-reallocated", /* 18 02 */
"\030\003recovered data with circ", /* 18 03 */
"\030\004recovered data with l-ec", /* 18 04 */
"\030\005recovered data - recommend reassignment", /* 18 05 */
"\030\006recovered data - recommend rewrite", /* 18 06 */
"\030\007recovered data with ecc - data rewritten", /* 18 07 */
"\030\010recovered data with linking", /* 18 08 */
"\031\000defect list error", /* 19 00 */
"\031\001defect list not available", /* 19 01 */
"\031\002defect list error in primary list", /* 19 02 */
"\031\003defect list error in grown list", /* 19 03 */
"\032\000parameter list length error", /* 1A 00 */
"\033\000synchronous data transfer error", /* 1B 00 */
"\034\000defect list not found", /* 1C 00 */
"\034\001primary defect list not found", /* 1C 01 */
"\034\002grown defect list not found", /* 1C 02 */
"\035\000miscompare during verify operation", /* 1D 00 */
"\036\000recovered id with ecc correction", /* 1E 00 */
"\037\000partial defect list transfer", /* 1F 00 */
"\040\000invalid command operation code", /* 20 00 */
"\040\001access controls code 1 (99-314) [proposed]", /* 20 01 */
"\040\002access controls code 2 (99-314) [proposed]", /* 20 02 */
"\040\003access controls code 3 (99-314) [proposed]", /* 20 03 */
"\040\004read type operation while in write capable state", /* 20 04 */
"\040\005write type operation while in read capable state", /* 20 05 */
"\040\006illegal command while in explicit address model", /* 20 06 */
"\040\007illegal command while in implicit address model", /* 20 07 */
"\040\010access controls code 5 (99-245) [proposed]", /* 20 08 */
"\040\011access controls code 6 (99-245) [proposed]", /* 20 09 */
"\040\012access controls code 7 (99-245) [proposed]", /* 20 0A */
"\040\013access controls code 8 (99-245) [proposed]", /* 20 0B */
"\041\000logical block address out of range", /* 21 00 */
"\041\001invalid element address", /* 21 01 */
"\041\002invalid address for write", /* 21 02 */
"\042\000illegal function (use 20 00, 24 00, or 26 00)",/* 22 00 */
#ifdef __used__
"\043\000", /* 23 00 */
#endif
"\044\000invalid field in cdb", /* 24 00 */
"\044\001cdb decryption error", /* 24 01 */
"\044\002invalid cdb field while in explicit block address model", /* 24 02 */
"\044\003invalid cdb field while in implicit block address model", /* 24 03 */
"\045\000logical unit not supported", /* 25 00 */
"\046\000invalid field in parameter list", /* 26 00 */
"\046\001parameter not supported", /* 26 01 */
"\046\002parameter value invalid", /* 26 02 */
"\046\003threshold parameters not supported", /* 26 03 */
"\046\004invalid release of persistent reservation", /* 26 04 */
"\046\005data decryption error", /* 26 05 */
"\046\006too many target descriptors", /* 26 06 */
"\046\007unsupported target descriptor type code", /* 26 07 */
"\046\010too many segment descriptors", /* 26 08 */
"\046\011unsupported segment descriptor type code", /* 26 09 */
"\046\012unexpected inexact segment", /* 26 0A */
"\046\013inline data length exceeded", /* 26 0B */
"\046\014invalid operation for copy source or destination", /* 26 0C */
"\046\015copy segment granularity violation", /* 26 0D */
"\047\000write protected", /* 27 00 */
"\047\001hardware write protected", /* 27 01 */
"\047\002logical unit software write protected", /* 27 02 */
"\047\003associated write protect", /* 27 03 */
"\047\004persistent write protect", /* 27 04 */
"\047\005permanent write protect", /* 27 05 */
"\047\006conditional write protect", /* 27 06 */
"\050\000not ready to ready change, medium may have changed", /* 28 00 */
"\050\001import or export element accessed", /* 28 01 */
"\051\000power on, reset, or bus device reset occurred",/* 29 00 */
"\051\001power on occurred", /* 29 01 */
"\051\002scsi bus reset occurred", /* 29 02 */
"\051\003bus device reset function occurred", /* 29 03 */
"\051\004device internal reset", /* 29 04 */
"\051\005transceiver mode changed to single-ended", /* 29 05 */
"\051\006transceiver mode changed to lvd", /* 29 06 */
"\052\000parameters changed", /* 2A 00 */
"\052\001mode parameters changed", /* 2A 01 */
"\052\002log parameters changed", /* 2A 02 */
"\052\003reservations preempted", /* 2A 03 */
"\052\004reservations released", /* 2A 04 */
"\052\005registrations preempted", /* 2A 05 */
"\052\006asymmetric access code 6 (00-232) [proposed]", /* 2A 06 */
"\052\007asymmetric access code 7 (00-232) [proposed]", /* 2A 07 */
"\053\000copy cannot execute since host cannot disconnect", /* 2B 00 */
"\054\000command sequence error", /* 2C 00 */
"\054\001too many windows specified", /* 2C 01 */
"\054\002invalid combination of windows specified", /* 2C 02 */
"\054\003current program area is not empty", /* 2C 03 */
"\054\004current program area is empty", /* 2C 04 */
"\054\005illegal power condition request", /* 2C 05 */
"\054\006persistent prevent conflict", /* 2C 06 */
"\055\000overwrite error on update in place", /* 2D 00 */
"\056\000insufficient time for operation", /* 2E 00 */
"\057\000commands cleared by another initiator", /* 2F 00 */
"\060\000incompatible medium installed", /* 30 00 */
"\060\001cannot read medium - unknown format", /* 30 01 */
"\060\002cannot read medium - incompatible format", /* 30 02 */
"\060\003cleaning cartridge installed", /* 30 03 */
"\060\004cannot write medium - unknown format", /* 30 04 */
"\060\005cannot write medium - incompatible format", /* 30 05 */
"\060\006cannot format medium - incompatible medium", /* 30 06 */
"\060\007cleaning failure", /* 30 07 */
"\060\010cannot write - application code mismatch", /* 30 08 */
"\060\011current session not fixated for append", /* 30 09 */
"\060\020medium not formatted", /* 30 10 */
"\061\000medium format corrupted", /* 31 00 */
"\061\001format command failed", /* 31 01 */
"\061\002zoned formatting failed due to spare linking", /* 31 02 */
"\062\000no defect spare location available", /* 32 00 */
"\062\001defect list update failure", /* 32 01 */
"\063\000tape length error", /* 33 00 */
"\064\000enclosure failure", /* 34 00 */
"\065\000enclosure services failure", /* 35 00 */
"\065\001unsupported enclosure function", /* 35 01 */
"\065\002enclosure services unavailable", /* 35 02 */
"\065\003enclosure services transfer failure", /* 35 03 */
"\065\004enclosure services transfer refused", /* 35 04 */
"\066\000ribbon, ink, or toner failure", /* 36 00 */
"\067\000rounded parameter", /* 37 00 */
"\070\000event status notification", /* 38 00 */
"\070\002esn - power management class event", /* 38 02 */
"\070\004esn - media class event", /* 38 04 */
"\070\006esn - device busy class event", /* 38 06 */
"\071\000saving parameters not supported", /* 39 00 */
"\072\000medium not present", /* 3A 00 */
"\072\001medium not present - tray closed", /* 3A 01 */
"\072\002medium not present - tray open", /* 3A 02 */
"\072\003medium not present - loadable", /* 3A 03 */
"\072\004medium not present - medium auxiliary memory accessible", /* 3A 04 */
"\073\000sequential positioning error", /* 3B 00 */
"\073\001tape position error at beginning-of-medium", /* 3B 01 */
"\073\002tape position error at end-of-medium", /* 3B 02 */
"\073\003tape or electronic vertical forms unit not ready", /* 3B 03 */
"\073\004slew failure", /* 3B 04 */
"\073\005paper jam", /* 3B 05 */
"\073\006failed to sense top-of-form", /* 3B 06 */
"\073\007failed to sense bottom-of-form", /* 3B 07 */
"\073\010reposition error", /* 3B 08 */
"\073\011read past end of medium", /* 3B 09 */
"\073\012read past beginning of medium", /* 3B 0A */
"\073\013position past end of medium", /* 3B 0B */
"\073\014position past beginning of medium", /* 3B 0C */
"\073\015medium destination element full", /* 3B 0D */
"\073\016medium source element empty", /* 3B 0E */
"\073\017end of medium reached", /* 3B 0F */
"\073\021medium magazine not accessible", /* 3B 11 */
"\073\022medium magazine removed", /* 3B 12 */
"\073\023medium magazine inserted", /* 3B 13 */
"\073\024medium magazine locked", /* 3B 14 */
"\073\025medium magazine unlocked", /* 3B 15 */
"\073\026mechanical positioning or changer error", /* 3B 16 */
#ifdef __used__
"\074\000", /* 3C 00 */
#endif
"\075\000invalid bits in identify message", /* 3D 00 */
"\076\000logical unit has not self-configured yet", /* 3E 00 */
"\076\001logical unit failure", /* 3E 01 */
"\076\002timeout on logical unit", /* 3E 02 */
"\076\003logical unit failed self-test", /* 3E 03 */
"\076\004logical unit unable to update self-test log", /* 3E 04 */
"\077\000target operating conditions have changed", /* 3F 00 */
"\077\001microcode has been changed", /* 3F 01 */
"\077\002changed operating definition", /* 3F 02 */
"\077\003inquiry data has changed", /* 3F 03 */
"\077\004component device attached", /* 3F 04 */
"\077\005device identifier changed", /* 3F 05 */
"\077\006redundancy group created or modified", /* 3F 06 */
"\077\007redundancy group deleted", /* 3F 07 */
"\077\010spare created or modified", /* 3F 08 */
"\077\011spare deleted", /* 3F 09 */
"\077\012volume set created or modified", /* 3F 0A */
"\077\013volume set deleted", /* 3F 0B */
"\077\014volume set deassigned", /* 3F 0C */
"\077\015volume set reassigned", /* 3F 0D */
"\077\016reported luns data has changed", /* 3F 0E */
"\077\017echo buffer overwritten", /* 3F 0F */
"\077\020medium loadable", /* 3F 10 */
"\077\021medium auxiliary memory accessible", /* 3F 11 */
"\100\000ram failure (should use 40 nn)", /* 40 00 */
#ifdef XXX
"\100\000nn diagnostic failure on component nn (80h-ffh)", /* 40 00 */
#endif
"\100\000diagnostic failure on component nn (80h-ffh)", /* 40 00 */
"\101\000data path failure (should use 40 nn)", /* 41 00 */
"\102\000power-on or self-test failure (should use 40 nn)", /* 42 00 */
"\103\000message error", /* 43 00 */
"\104\000internal target failure", /* 44 00 */
"\105\000select or reselect failure", /* 45 00 */
"\106\000unsuccessful soft reset", /* 46 00 */
"\107\000scsi parity error", /* 47 00 */
"\107\001data phase crc error detected", /* 47 01 */
"\107\002scsi parity error detected during st data phase", /* 47 02 */
"\107\003information unit crc error detected", /* 47 03 */
"\107\004asynchronous information protection error detected", /* 47 04 */
"\110\000initiator detected error message received", /* 48 00 */
"\111\000invalid message error", /* 49 00 */
"\112\000command phase error", /* 4A 00 */
"\113\000data phase error", /* 4B 00 */
"\114\000logical unit failed self-configuration", /* 4C 00 */
#ifdef XXX
"\115\000nn tagged overlapped commands (nn = queue tag)", /* 4D 00 */
#endif
"\115\000tagged overlapped commands (nn = queue tag)", /* 4D 00 */
"\116\000overlapped commands attempted", /* 4E 00 */
#ifdef __used__
"\117\000", /* 4F 00 */
#endif
"\120\000write append error", /* 50 00 */
"\120\001write append position error", /* 50 01 */
"\120\002position error related to timing", /* 50 02 */
"\121\000erase failure", /* 51 00 */
"\121\001erase failure - incomplete erase operation detected", /* 51 01 */
"\122\000cartridge fault", /* 52 00 */
"\123\000media load or eject failed", /* 53 00 */
"\123\001unload tape failure", /* 53 01 */
"\123\002medium removal prevented", /* 53 02 */
"\124\000scsi to host system interface failure", /* 54 00 */
"\125\000system resource failure", /* 55 00 */
"\125\001system buffer full", /* 55 01 */
"\125\002insufficient reservation resources", /* 55 02 */
"\125\003insufficient resources", /* 55 03 */
"\125\004insufficient registration resources", /* 55 04 */
"\125\005access controls code 4 (99-314) [proposed]", /* 55 05 */
"\125\006auxiliary memory code 1 (99-148) [proposed]", /* 55 06 */
#ifdef __used__
"\126\000", /* 56 00 */
#endif
"\127\000unable to recover table-of-contents", /* 57 00 */
"\130\000generation does not exist", /* 58 00 */
"\131\000updated block read", /* 59 00 */
"\132\000operator request or state change input", /* 5A 00 */
"\132\001operator medium removal request", /* 5A 01 */
"\132\002operator selected write protect", /* 5A 02 */
"\132\003operator selected write permit", /* 5A 03 */
"\133\000log exception", /* 5B 00 */
"\133\001threshold condition met", /* 5B 01 */
"\133\002log counter at maximum", /* 5B 02 */
"\133\003log list codes exhausted", /* 5B 03 */
"\134\000rpl status change", /* 5C 00 */
"\134\001spindles synchronized", /* 5C 01 */
"\134\002spindles not synchronized", /* 5C 02 */
"\135\000failure prediction threshold exceeded", /* 5D 00 */
"\135\001media failure prediction threshold exceeded", /* 5D 01 */
"\135\002logical unit failure prediction threshold exceeded", /* 5D 02 */
"\135\003spare area exhaustion prediction threshold exceeded", /* 5D 03 */
"\135\020hardware impending failure general hard drive failure",/* 5D 10 */
"\135\021hardware impending failure drive error rate too high", /* 5D 11 */
"\135\022hardware impending failure data error rate too high", /* 5D 12 */
"\135\023hardware impending failure seek error rate too high", /* 5D 13 */
"\135\024hardware impending failure too many block reassigns", /* 5D 14 */
"\135\025hardware impending failure access times too high", /* 5D 15 */
"\135\026hardware impending failure start unit times too high", /* 5D 16 */
"\135\027hardware impending failure channel parametrics",/* 5D 17 */
"\135\030hardware impending failure controller detected",/* 5D 18 */
"\135\031hardware impending failure throughput performance", /* 5D 19 */
"\135\032hardware impending failure seek time performance", /* 5D 1A */
"\135\033hardware impending failure spin-up retry count", /* 5D 1B */
"\135\034hardware impending failure drive calibration retry count", /* 5D 1C */
"\135\040controller impending failure general hard drive failure", /* 5D 20 */
"\135\041controller impending failure drive error rate too high", /* 5D 21 */
"\135\042controller impending failure data error rate too high",/* 5D 22 */
"\135\043controller impending failure seek error rate too high",/* 5D 23 */
"\135\044controller impending failure too many block reassigns",/* 5D 24 */
"\135\045controller impending failure access times too high", /* 5D 25 */
"\135\046controller impending failure start unit times too high", /* 5D 26 */
"\135\047controller impending failure channel parametrics", /* 5D 27 */
"\135\050controller impending failure controller detected", /* 5D 28 */
"\135\051controller impending failure throughput performance", /* 5D 29 */
"\135\052controller impending failure seek time performance", /* 5D 2A */
"\135\053controller impending failure spin-up retry count", /* 5D 2B */
"\135\054controller impending failure drive calibration retry count", /* 5D 2C */
"\135\060data channel impending failure general hard drive failure", /* 5D 30 */
"\135\061data channel impending failure drive error rate too high", /* 5D 31 */
"\135\062data channel impending failure data error rate too high", /* 5D 32 */
"\135\063data channel impending failure seek error rate too high", /* 5D 33 */
"\135\064data channel impending failure too many block reassigns", /* 5D 34 */
"\135\065data channel impending failure access times too high", /* 5D 35 */
"\135\066data channel impending failure start unit times too high", /* 5D 36 */
"\135\067data channel impending failure channel parametrics", /* 5D 37 */
"\135\070data channel impending failure controller detected", /* 5D 38 */
"\135\071data channel impending failure throughput performance",/* 5D 39 */
"\135\072data channel impending failure seek time performance", /* 5D 3A */
"\135\073data channel impending failure spin-up retry count", /* 5D 3B */
"\135\074data channel impending failure drive calibration retry count", /* 5D 3C */
"\135\100servo impending failure general hard drive failure", /* 5D 40 */
"\135\101servo impending failure drive error rate too high", /* 5D 41 */
"\135\102servo impending failure data error rate too high", /* 5D 42 */
"\135\103servo impending failure seek error rate too high", /* 5D 43 */
"\135\104servo impending failure too many block reassigns", /* 5D 44 */
"\135\105servo impending failure access times too high",/* 5D 45 */
"\135\106servo impending failure start unit times too high", /* 5D 46 */
"\135\107servo impending failure channel parametrics", /* 5D 47 */
"\135\110servo impending failure controller detected", /* 5D 48 */
"\135\111servo impending failure throughput performance", /* 5D 49 */
"\135\112servo impending failure seek time performance",/* 5D 4A */
"\135\113servo impending failure spin-up retry count", /* 5D 4B */
"\135\114servo impending failure drive calibration retry count",/* 5D 4C */
"\135\120spindle impending failure general hard drive failure", /* 5D 50 */
"\135\121spindle impending failure drive error rate too high", /* 5D 51 */
"\135\122spindle impending failure data error rate too high", /* 5D 52 */
"\135\123spindle impending failure seek error rate too high", /* 5D 53 */
"\135\124spindle impending failure too many block reassigns", /* 5D 54 */
"\135\125spindle impending failure access times too high", /* 5D 55 */
"\135\126spindle impending failure start unit times too high", /* 5D 56 */
"\135\127spindle impending failure channel parametrics",/* 5D 57 */
"\135\130spindle impending failure controller detected",/* 5D 58 */
"\135\131spindle impending failure throughput performance", /* 5D 59 */
"\135\132spindle impending failure seek time performance", /* 5D 5A */
"\135\133spindle impending failure spin-up retry count",/* 5D 5B */
"\135\134spindle impending failure drive calibration retry count", /* 5D 5C */
"\135\140firmware impending failure general hard drive failure",/* 5D 60 */
"\135\141firmware impending failure drive error rate too high", /* 5D 61 */
"\135\142firmware impending failure data error rate too high", /* 5D 62 */
"\135\143firmware impending failure seek error rate too high", /* 5D 63 */
"\135\144firmware impending failure too many block reassigns", /* 5D 64 */
"\135\145firmware impending failure access times too high", /* 5D 65 */
"\135\146firmware impending failure start unit times too high", /* 5D 66 */
"\135\147firmware impending failure channel parametrics", /* 5D 67 */
"\135\150firmware impending failure controller detected", /* 5D 68 */
"\135\151firmware impending failure throughput performance", /* 5D 69 */
"\135\152firmware impending failure seek time performance", /* 5D 6A */
"\135\153firmware impending failure spin-up retry count", /* 5D 6B */
"\135\154firmware impending failure drive calibration retry count", /* 5D 6C */
"\135\377failure prediction threshold exceeded (false)",/* 5D FF */
"\136\000low power condition on", /* 5E 00 */
"\136\001idle condition activated by timer", /* 5E 01 */
"\136\002standby condition activated by timer", /* 5E 02 */
"\136\003idle condition activated by command", /* 5E 03 */
"\136\004standby condition activated by command", /* 5E 04 */
"\136\101power state change to active", /* 5E 41 */
"\136\102power state change to idle", /* 5E 42 */
"\136\103power state change to standby", /* 5E 43 */
"\136\105power state change to sleep", /* 5E 45 */
"\136\107power state change to device control", /* 5E 47 */
#ifdef __used__
"\137\000", /* 5F 00 */
#endif
"\140\000lamp failure", /* 60 00 */
"\141\000video acquisition error", /* 61 00 */
"\141\001unable to acquire video", /* 61 01 */
"\141\002out of focus", /* 61 02 */
"\142\000scan head positioning error", /* 62 00 */
"\143\000end of user area encountered on this track", /* 63 00 */
"\143\001packet does not fit in available space", /* 63 01 */
"\144\000illegal mode for this track", /* 64 00 */
"\144\001invalid packet size", /* 64 01 */
"\145\000voltage fault", /* 65 00 */
"\146\000automatic document feeder cover up", /* 66 00 */
"\146\001automatic document feeder lift up", /* 66 01 */
"\146\002document jam in automatic document feeder", /* 66 02 */
"\146\003document miss feed automatic in document feeder", /* 66 03 */
"\147\000configuration failure", /* 67 00 */
"\147\001configuration of incapable logical units failed", /* 67 01 */
"\147\002add logical unit failed", /* 67 02 */
"\147\003modification of logical unit failed", /* 67 03 */
"\147\004exchange of logical unit failed", /* 67 04 */
"\147\005remove of logical unit failed", /* 67 05 */
"\147\006attachment of logical unit failed", /* 67 06 */
"\147\007creation of logical unit failed", /* 67 07 */
"\147\010assign failure occurred", /* 67 08 */
"\147\011multiply assigned logical unit", /* 67 09 */
"\147\012asymmetric access code 4 (00-232) [proposed]", /* 67 0A */
"\147\013asymmetric access code 5 (00-232) [proposed]", /* 67 0B */
"\150\000logical unit not configured", /* 68 00 */
"\151\000data loss on logical unit", /* 69 00 */
"\151\001multiple logical unit failures", /* 69 01 */
"\151\002parity/data mismatch", /* 69 02 */
"\152\000informational, refer to log", /* 6A 00 */
"\153\000state change has occurred", /* 6B 00 */
"\153\001redundancy level got better", /* 6B 01 */
"\153\002redundancy level got worse", /* 6B 02 */
"\154\000rebuild failure occurred", /* 6C 00 */
"\155\000recalculate failure occurred", /* 6D 00 */
"\156\000command to logical unit failed", /* 6E 00 */
"\157\000copy protection key exchange failure - authentication failure",/* 6F 00 */
"\157\001copy protection key exchange failure - key not present", /* 6F 01 */
"\157\002copy protection key exchange failure - key not established", /* 6F 02 */
"\157\003read of scrambled sector without authentication", /* 6F 03 */
"\157\004media region code is mismatched to logical unit region", /* 6F 04 */
"\157\005drive region must be permanent/region reset count error", /* 6F 05 */
#ifdef XXX
"\160\000nn decompression exception short algorithm id of nn", /* 70 00 */
#endif
"\160\000decompression exception short algorithm id of nn", /* 70 00 */
"\161\000decompression exception long algorithm id", /* 71 00 */
"\162\000session fixation error", /* 72 00 */
"\162\001session fixation error writing lead-in", /* 72 01 */
"\162\002session fixation error writing lead-out", /* 72 02 */
"\162\003session fixation error - incomplete track in session", /* 72 03 */
"\162\004empty or partially written reserved track", /* 72 04 */
"\162\005no more track reservations allowed", /* 72 05 */
"\163\000cd control error", /* 73 00 */
"\163\001power calibration area almost full", /* 73 01 */
"\163\002power calibration area is full", /* 73 02 */
"\163\003power calibration area error", /* 73 03 */
"\163\004program memory area update failure", /* 73 04 */
"\163\005program memory area is full", /* 73 05 */
"\163\006rma/pma is almost full", /* 73 06 */
#ifdef __used__
"\164\000", /* 74 00 */
"\165\000", /* 75 00 */
"\166\000", /* 76 00 */
"\167\000", /* 77 00 */
"\170\000", /* 78 00 */
"\171\000", /* 79 00 */
"\172\000", /* 7A 00 */
"\173\000", /* 7B 00 */
"\174\000", /* 7C 00 */
"\175\000", /* 7D 00 */
"\176\000", /* 7E 00 */
"\177\000", /* 7F 00 */
#endif
#ifdef XXX
"\200\000start vendor unique", /* 80 00 */
#endif
NULL
};
#ifdef SMO_C501
static const char *sd_smo_c501_error_str[] = {
"\012\000disk not inserted", /* 0x0a */
"\013\000load/unload failure", /* 0x0b */
"\014\000spindle failure", /* 0x0c */
"\015\000focus failure", /* 0x0d */
"\016\000tracking failure", /* 0x0e */
"\017\000bias magnet failure", /* 0x0f */
"\043\000illegal function for medium type", /* 0x23 */
/*XXX*/ "\070\000recoverable write error", /* 0x38 */
/*XXX*/ "\071\000write error recovery failed", /* 0x39 */
"\072\000defect list update failed", /* 0x3a */
"\075\000defect list not available", /* 0x3d */
"\200\000limited laser life", /* 0x80 */
"\201\000laser focus coil over-current", /* 0x81 */
"\202\000laser tracking coil over-current", /* 0x82 */
"\203\000temperature alarm", /* 0x83 */
NULL
};
#endif
static char *sd_sense_keys[] = {
"No Additional Sense", /* 0x00 */
"Recovered Error", /* 0x01 */
"Not Ready", /* 0x02 */
"Medium Error", /* 0x03 */
"Hardware Error", /* 0x04 */
"Illegal Request", /* 0x05 */
"Unit Attention", /* 0x06 */
"Data Protect", /* 0x07 */
"Blank Check", /* 0x08 */
"Vendor Unique", /* 0x09 */
"Copy Aborted", /* 0x0a */
"Aborted Command", /* 0x0b */
"Equal", /* 0x0c */
"Volume Overflow", /* 0x0d */
"Miscompare", /* 0x0e */
"Reserved" /* 0x0f */
};
static char *sd_cmds[] = {
"\000test unit ready", /* 0x00 */
"\001rezero", /* 0x01 */
"\003request sense", /* 0x03 */
"\004format", /* 0x04 */
"\007reassign", /* 0x07 */
"\010read", /* 0x08 */
"\012write", /* 0x0a */
"\013seek", /* 0x0b */
"\022inquiry", /* 0x12 */
"\025mode select", /* 0x15 */
"\026reserve", /* 0x16 */
"\027release", /* 0x17 */
"\030copy", /* 0x18 */
"\032mode sense", /* 0x1a */
"\033start/stop", /* 0x1b */
"\036door lock", /* 0x1e */
"\067read defect data", /* 0x37 */
NULL
};
EXPORT
const char *
scg_sensemsg(ctype, code, qual, vec, sbuf, maxcnt)
register int ctype;
register int code;
register int qual;
register const char **vec;
char *sbuf;
int maxcnt;
{
register int i;
/*
* Ignore controller type if error vec is supplied.
*/
if (vec == (const char **)NULL) switch (ctype) {
case DEV_MD21:
vec = sd_ccs_error_str;
break;
case DEV_ACB40X0:
case DEV_ACB4000:
case DEV_ACB4010:
case DEV_ACB4070:
case DEV_ACB5500:
vec = sd_adaptec_error_str;
break;
#ifdef SMO_C501
case DEV_SONY_SMO:
vec = sd_smo_c501_error_str;
break;
#endif
default:
vec = sd_ccs_error_str;
}
if (vec == (const char **)NULL)
return ("");
for (i = 0; i < 2; i++) {
while (*vec != (char *) NULL) {
if (code == (Uchar)(*vec)[0] &&
qual == (Uchar)(*vec)[1]) {
return (&(*vec)[2]);
} else {
vec++; /* Next entry */
}
}
if (*vec == (char *) NULL) /* End of List: switch over */
vec = sd_ccs_error_str;
}
if (code == 0x40) {
js_snprintf(sbuf, maxcnt,
"diagnostic failure on component 0x%X", qual);
return (sbuf);
}
if (code == 0x4D) {
js_snprintf(sbuf, maxcnt,
"tagged overlapped commands, queue tag is 0x%X",
qual);
return (sbuf);
}
if (code == 0x70) {
js_snprintf(sbuf, maxcnt,
"decompression exception short algorithm id of 0x%X",
qual);
return (sbuf);
}
if (qual != 0)
return ((char *)NULL);
if (code < 0x80) {
js_snprintf(sbuf, maxcnt, "invalid sense code 0x%X", code);
return (sbuf);
}
js_snprintf(sbuf, maxcnt, "vendor unique sense code 0x%X", code);
return (sbuf);
}
#undef sense /*XXX JS Hack, solange scgio.h noch nicht fertig ist */
EXPORT int
scg__errmsg(scgp, obuf, maxcnt, sense, status, sense_code)
SCSI *scgp;
char *obuf;
int maxcnt;
register struct scsi_sense *sense;
register struct scsi_status *status;
int sense_code;
{
char sbuf[80];
const char *sensemsg, *cmdname, *sensekey;
#define ext_sense ((struct scsi_ext_sense* ) sense)
register int blkno = 0;
register int code;
int badqual = 0;
int qual = 0;
int fru = 0;
int key = 0;
int segment = 0;
int blkvalid = 0;
int fm = 0;
int eom = 0;
int ili = 0;
int sksv = 0;
int n;
int sizeleft = maxcnt;
sensekey = sensemsg = "[]";
if (sense->code >= 0x70) {
if (sense_code >= 0)
code = sense_code;
else
code = ext_sense->sense_code;
segment = ext_sense->seg_num;
qual = ext_sense->qual_code;
fru = ext_sense->fru_code;
sksv = ext_sense->sksv;
} else {
code = sense->code;
}
if (status->chk == 0) {
sensemsg = "no sense";
} else {
if (sense->code >= 0x70) {
key = ext_sense->key;
if (key < 0x10)
sensekey = sd_sense_keys[ext_sense->key];
else
sensekey = "invalid sensekey";
blkno = (ext_sense->info_1 << 24) |
(ext_sense->info_2 << 16) |
(ext_sense->info_3 << 8) |
ext_sense->info_4;
fm = ext_sense->fil_mk;
eom = ext_sense->eom;
ili = ext_sense->ili;
} else {
key = -1;
sensekey = "[]";
blkno = (sense->high_addr << 16) |
(sense->mid_addr << 8) |
sense->low_addr;
fm = eom = 0;
}
blkvalid = sense->adr_val;
sensemsg = scg_sensemsg(scgp->dev, code, qual, scgp->nonstderrs, sbuf, sizeof(sbuf));
if (sensemsg == NULL) {
sensemsg = scg_sensemsg(scgp->dev, code, 0, scgp->nonstderrs, sbuf, sizeof(sbuf));
badqual = 1;
}
}
/*
if (un->un_cmd < sizeof(scsi_cmds)) {
cmdname = scsi_cmds[un->un_cmd];
} else {
cmdname = "unknown cmd";
}
*/
cmdname = "";
n = js_snprintf(obuf, sizeleft, "%sSense Key: 0x%X %s%s, Segment %d\n",
cmdname, key, sensekey,
(sense->code == 0x71)?", deferred error":"",
segment);
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
n = js_snprintf(obuf, sizeleft, "Sense Code: 0x%02X Qual 0x%02X %s%s%s%s Fru 0x%X\n",
code, qual, *sensemsg?"(":"", sensemsg, *sensemsg?")":"",
badqual? " [No matching qualifier]":"",
fru);
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
n = js_snprintf(obuf, sizeleft, "Sense flags: Blk %d %s%s%s%s",
blkno, blkvalid?"(valid) ":"(not valid) ",
fm?"file mark detected ":"",
eom?"end of medium ":"",
ili?"illegal block length ":"");
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
if (!sksv) {
n = js_snprintf(obuf, sizeleft, "\n");
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
return (maxcnt - sizeleft);
}
switch (key) {
case SC_ILLEGAL_REQUEST:
n = js_snprintf(obuf, sizeleft, "error refers to %s part, bit ptr %d %s field ptr %d",
ext_sense->cd? "command":"data",
(int)ext_sense->bptr,
ext_sense->bpv? "(valid)":"(not valid)",
ext_sense->field_ptr[0] << 8 |
ext_sense->field_ptr[1]);
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
break;
case SC_RECOVERABLE_ERROR:
case SC_HARDWARE_ERROR:
case SC_MEDIUM_ERROR:
n = js_snprintf(obuf, sizeleft, "actual retry count %d",
ext_sense->field_ptr[0] << 8 |
ext_sense->field_ptr[1]);
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
break;
case SC_NOT_READY:
n = js_snprintf(obuf, sizeleft, "operation %d%% done",
(100*(ext_sense->field_ptr[0] << 8 |
ext_sense->field_ptr[1]))/(unsigned)65536);
if (n < 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
break;
}
n = js_snprintf(obuf, sizeleft, "\n");
if (n <= 0) {
obuf[0] = '\0';
return (maxcnt - sizeleft);
}
obuf += n;
sizeleft -= n;
return (maxcnt - sizeleft);
}
#ifdef DEBUG
print_err(code, ctype)
{
register int i;
register char **vec = (char **)NULL;
switch (ctype) {
case CTYPE_MD21:
case CTYPE_CCS:
vec = sd_ccs_error_str;
break;
case CTYPE_ACB4000:
vec = sd_adaptec_error_str;
break;
#ifdef SMO_C501
case CTYPE_SMO_C501:
vec = sd_smo_c501_error_str;
break;
#endif
#ifdef CDD_521
case DEV_CDD_521:
vec = sd_cdd_521_error_str;
break;
#endif
}
js_printf("error code: 0x%x", code);
if (vec == (char **)NULL)
return;
for (i = 0; i < 2; i++) {
while (*vec != (char *) NULL) {
if (code == (Uchar)*vec[0]) {
js_printf(" (%s)", (char *)((int)(*vec)+1));
return;
} else
vec++;
}
if (*vec == (char *) NULL)
vec = sd_ccs_error_str;
}
}
main()
{
int i;
#ifdef ACB
for (i = 0; i < 0x30; i++) {
/* js_printf("Code: 0x%x Key: 0x%x ", i, sd_adaptec_keys[i]);*/
js_printf("Key: 0x%x %-16s ", sd_adaptec_keys[i],
sd_sense_keys[sd_adaptec_keys[i]] );
js_print_err(i, CTYPE_ACB4000);
js_printf("\n");
}
#else
/* for (i = 0; i < 0x84; i++) {*/
for (i = 0; i < 0xd8; i++) {
/* print_err(i, CTYPE_SMO_C501);*/
print_err(i, DEV_CDD_521);
js_printf("\n");
}
#endif
}
#endif