%!PS-Adobe-3.0
%%Creator: groff version 1.17.2
%%CreationDate: Tue Dec 24 17:03:44 2002
%%DocumentNeededResources: font Times-Roman
%%+ font Times-Bold
%%+ font Times-Italic
%%DocumentSuppliedResources: procset grops 1.17 2
%%Pages: 3
%%PageOrder: Ascend
%%Orientation: Portrait
%%EndComments
%%BeginProlog
%%BeginResource: procset grops 1.17 2
/setpacking where{
pop
currentpacking
true setpacking
}if
/grops 120 dict dup begin
/SC 32 def
/A/show load def
/B{0 SC 3 -1 roll widthshow}bind def
/C{0 exch ashow}bind def
/D{0 exch 0 SC 5 2 roll awidthshow}bind def
/E{0 rmoveto show}bind def
/F{0 rmoveto 0 SC 3 -1 roll widthshow}bind def
/G{0 rmoveto 0 exch ashow}bind def
/H{0 rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/I{0 exch rmoveto show}bind def
/J{0 exch rmoveto 0 SC 3 -1 roll widthshow}bind def
/K{0 exch rmoveto 0 exch ashow}bind def
/L{0 exch rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/M{rmoveto show}bind def
/N{rmoveto 0 SC 3 -1 roll widthshow}bind def
/O{rmoveto 0 exch ashow}bind def
/P{rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/Q{moveto show}bind def
/R{moveto 0 SC 3 -1 roll widthshow}bind def
/S{moveto 0 exch ashow}bind def
/T{moveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/SF{
findfont exch
[exch dup 0 exch 0 exch neg 0 0]makefont
dup setfont
[exch/setfont cvx]cvx bind def
}bind def
/MF{
findfont
[5 2 roll
0 3 1 roll
neg 0 0]makefont
dup setfont
[exch/setfont cvx]cvx bind def
}bind def
/level0 0 def
/RES 0 def
/PL 0 def
/LS 0 def
/MANUAL{
statusdict begin/manualfeed true store end
}bind def
/PLG{
gsave newpath clippath pathbbox grestore
exch pop add exch pop
}bind def
/BP{
/level0 save def
1 setlinecap
1 setlinejoin
72 RES div dup scale
LS{
90 rotate
}{
0 PL translate
}ifelse
1 -1 scale
}bind def
/EP{
level0 restore
showpage
}bind def
/DA{
newpath arcn stroke
}bind def
/SN{
transform
.25 sub exch .25 sub exch
round .25 add exch round .25 add exch
itransform
}bind def
/DL{
SN
moveto
SN
lineto stroke
}bind def
/DC{
newpath 0 360 arc closepath
}bind def
/TM matrix def
/DE{
TM currentmatrix pop
translate scale newpath 0 0 .5 0 360 arc closepath
TM setmatrix
}bind def
/RC/rcurveto load def
/RL/rlineto load def
/ST/stroke load def
/MT/moveto load def
/CL/closepath load def
/FL{
currentgray exch setgray fill setgray
}bind def
/BL/fill load def
/LW/setlinewidth load def
/RE{
findfont
dup maxlength 1 index/FontName known not{1 add}if dict begin
{
1 index/FID ne{def}{pop pop}ifelse
}forall
/Encoding exch def
dup/FontName exch def
currentdict end definefont pop
}bind def
/DEFS 0 def
/EBEGIN{
moveto
DEFS begin
}bind def
/EEND/end load def
/CNT 0 def
/level1 0 def
/PBEGIN{
/level1 save def
translate
div 3 1 roll div exch scale
neg exch neg exch translate
0 setgray
0 setlinecap
1 setlinewidth
0 setlinejoin
10 setmiterlimit
[]0 setdash
/setstrokeadjust where{
pop
false setstrokeadjust
}if
/setoverprint where{
pop
false setoverprint
}if
newpath
/CNT countdictstack def
userdict begin
/showpage{}def
}bind def
/PEND{
clear
countdictstack CNT sub{end}repeat
level1 restore
}bind def
end def
/setpacking where{
pop
setpacking
}if
%%EndResource
%%IncludeResource: font Times-Roman
%%IncludeResource: font Times-Bold
%%IncludeResource: font Times-Italic
grops begin/DEFS 1 dict def DEFS begin/u{.001 mul}bind def end/RES 72
def/PL 841.89 def/LS false def/ENC0[/asciicircum/asciitilde/Scaron
/Zcaron/scaron/zcaron/Ydieresis/trademark/quotesingle/.notdef/.notdef
/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
/.notdef/.notdef/.notdef/space/exclam/quotedbl/numbersign/dollar/percent
/ampersand/quoteright/parenleft/parenright/asterisk/plus/comma/hyphen
/period/slash/zero/one/two/three/four/five/six/seven/eight/nine/colon
/semicolon/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N/O
/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright/circumflex
/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y
/z/braceleft/bar/braceright/tilde/.notdef/quotesinglbase/guillemotleft
/guillemotright/bullet/florin/fraction/perthousand/dagger/daggerdbl
/endash/emdash/ff/fi/fl/ffi/ffl/dotlessi/dotlessj/grave/hungarumlaut
/dotaccent/breve/caron/ring/ogonek/quotedblleft/quotedblright/oe/lslash
/quotedblbase/OE/Lslash/.notdef/exclamdown/cent/sterling/currency/yen
/brokenbar/section/dieresis/copyright/ordfeminine/guilsinglleft
/logicalnot/minus/registered/macron/degree/plusminus/twosuperior
/threesuperior/acute/mu/paragraph/periodcentered/cedilla/onesuperior
/ordmasculine/guilsinglright/onequarter/onehalf/threequarters
/questiondown/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE
/Ccedilla/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex
/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis
/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn
/germandbls/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide/oslash
/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis]def
/Times-Italic@0 ENC0/Times-Italic RE/Times-Bold@0 ENC0/Times-Bold RE
/Times-Roman@0 ENC0/Times-Roman RE
%%EndProlog
%%Page: 1 1
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 105.385(SCGCHECK\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(SCGCHECK\(1\))107.885 E/F1 10.95/Times-Bold@0 SF
-.219(NA)72 84 S(ME).219 E F0(scgcheck \255 check and v)108 96 Q
(alidate the ABI of libscg)-.25 E F1(SYNOPSIS)72 112.8 Q/F2 10
/Times-Bold@0 SF(scgcheck)108 124.8 Q F0([)2.5 E/F3 10/Times-Italic@0 SF
(options)2.5 E F0(])2.5 E F1(DESCRIPTION)72 153.6 Q F2(Scgcheck)108
165.6 Q F0(is used to check and v)2.5 E
(erify the Application Binary Interf)-.15 E(ace of libscg.)-.1 E(The)108
194.4 Q F3(de)3.065 E(vice)-.15 E F0 .565(refers to)3.065 F F3(scsib)
3.065 E(us)-.2 E F0(/).27 E F3(tar).13 E -.1(ge)-.37 G(t).1 E F0(/).68 E
F3(lun).09 E F0 .565(of the dri)3.065 F -.15(ve)-.25 G 3.064(.C).15 G
.564(ommunication on)-3.064 F F3(SunOS)3.064 E F0 .564
(is done with the SCSI gen-)3.064 F 1.02(eral dri)108 206.4 R -.15(ve)
-.25 G(r).15 E F2(scg)3.52 E(.)-.15 E F0 1.02
(Other operating systems are using a library simulation of this dri)6.02
F -.15(ve)-.25 G 4.62 -.55(r. P).15 H 1.02(ossible syntax is:).55 F F2
(de)108 218.4 Q(v=)-.15 E F3(scsib)3.228 E(us)-.2 E F0(,).27 E F3(tar)
.13 E -.1(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0(or)3.227 E F2(de)
3.227 E(v=)-.15 E F3(tar)3.227 E -.1(ge)-.37 G(t).1 E F0(,).68 E F3(lun)
.09 E F0 5.727(.I).24 G 3.227(nt)-5.727 G .727(he latter case, the dri)
-3.227 F 1.027 -.15(ve h)-.25 H .727(as to be connected to the def).15 F
(ault)-.1 E .85(SCSI b)108 230.4 R .85(us of the machine.)-.2 F F3
(Scsib)5.85 E(us)-.2 E F0(,).27 E F3(tar)3.35 E -.1(ge)-.37 G(t).1 E F0
(and)3.351 E F3(lun)3.351 E F0 .851(are inte)3.351 F .851(ger numbers.)
-.15 F .851(Some operating systems or SCSI)5.851 F .338(transport imple\
mentations may require to specify a \214lename in addition.)108 242.4 R
.337(In this case the correct syntax for)5.337 F 2.308(the de)108 254.4
R 2.308(vice is:)-.25 F F2(de)4.808 E(v=)-.15 E F3(de)4.808 E(vicename)
-.15 E F0(:).18 E F3(scsib).34 E(us)-.2 E F0(,).27 E F3(tar).13 E -.1
(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0(or)4.808 E F2(de)4.808 E
(v=)-.15 E F3(de)4.808 E(vicename)-.15 E F0(:).18 E F3(tar).13 E -.1(ge)
-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0 7.308(.I).24 G 4.809(ft)-7.308
G 2.309(he name of the)-4.809 F(de)108 266.4 Q .465
(vice node that has been speci\214ed on such a system refers to e)-.25 F
.465(xactly one SCSI de)-.15 F .465(vice, a shorthand in the)-.25 F
(form)108 278.4 Q F2(de)2.646 E(v=)-.15 E F3(de)2.646 E(vicename)-.15 E
F0(:).18 E F3(@)-.68 E F0(or)2.646 E F2(de)2.646 E(v=)-.15 E F3(de)2.647
E(vicename)-.15 E F0(:).18 E F3(@)-.68 E F0(,)A F3(lun).09 E F0 .147
(may be used instead of)2.647 F F2(de)2.647 E(v=)-.15 E F3(de)2.647 E
(vicename)-.15 E F0(:).18 E F3(scsib).34 E(us)-.2 E F0(,).27 E F3(tar)
.13 E(-)-.2 E -.1(ge)108 290.4 S(t).1 E F0(,).68 E F3(lun)A F0(.).24 E
2.32 -.8(To a)108 319.2 T .72(ccess remote SCSI de).8 F .72
(vices, you need to prepend the SCSI de)-.25 F .72
(vice name by a remote de)-.25 F .72(vice indicator)-.25 F(.)-.55 E
(The remote de)108 331.2 Q(vice indicator is either)-.25 E F2(REMO)2.5 E
(TE:)-.4 E F3(user@host:).08 E F0(or)2.5 E F2(REMO)5 E(TE:)-.4 E F3
(host:).31 E F0 3.273(Av)108 343.2 S .773(alid remote SCSI de)-3.523 F
.773(vice name may be:)-.25 F F2(REMO)3.273 E(TE:)-.4 E F3(user@host:)
.08 E F0 .773(to allo)3.273 F 3.274(wr)-.25 G .774(emote SCSI b)-3.274 F
.774(us scanning or)-.2 F F2(REMO)108 355.2 Q(TE:)-.4 E F3
(user@host:1,0,0)A F0(to access the SCSI de)2.5 E(vice at)-.25 E F3
(host)2.5 E F0(connected to SCSI b)2.5 E(us # 1,tar)-.2 E(get 0 lun 0.)
-.18 E 1.862 -.8(To m)108 384 T(ak).8 E(e)-.1 E F2 -.18(re)2.762 G(adcd)
.18 E F0 .262(portable to all)2.762 F/F4 8/Times-Roman@0 SF(UNIX)2.761 E
F0 .261(platforms, the syntax)2.761 F F2(de)2.761 E(v=)-.15 E F3(de)
2.761 E(vicename)-.15 E F0(:).18 E F3(scsib).34 E(us)-.2 E F0(,).27 E F3
(tar).13 E -.1(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0 .261
(is preferred)2.761 F .754(as is hides OS speci\214c kno)108 396 R .755
(wledge about de)-.25 F .755(vice names from the user)-.25 F 5.755(.A)
-.55 G .755(speci\214c OS must not necessarily)-2.5 F(support a w)108
408 Q(ay to specify a real de)-.1 E(vice \214le name nor a w)-.25 E
(ay to specify)-.1 E F3(scsib)2.5 E(us)-.2 E F0(,).27 E F3(tar).13 E -.1
(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0(.).24 E F3(Scsib)108 436.8
Q(us)-.2 E F0 3.257(0i)3.257 G 3.257(st)-3.257 G .757(he def)-3.257 F
.757(ault SCSI b)-.1 F .757(us on the machine. W)-.2 F .756
(atch the boot messages for more information or look)-.8 F(into)108
448.8 Q F2(/v)2.995 E(ar/adm/messages)-.1 E F0 .496
(for more information about the SCSI con\214guration of your machine.)
2.995 F .496(If you ha)5.496 F -.15(ve)-.2 G 2.158
(problems to \214gure out what v)108 460.8 R 2.158(alues for)-.25 F F3
(scsib)4.658 E(us)-.2 E F0(,).27 E F3(tar).13 E -.1(ge)-.37 G(t).1 E F0
(,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
(\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 472.8
Q(ecord)-.18 E F0(.)A F1(OPTIONS)72 501.6 Q F2<ad76>108 513.6 Q(ersion)
-.1 E F0(Print v)144 525.6 Q(ersion information and e)-.15 E(xit.)-.15 E
F2(de)108 542.4 Q(v=)-.15 E F3(tar).13 E -.1(ge)-.37 G(t).1 E F0 .207
(Sets the SCSI tar)144 554.4 R .207(get def)-.18 F .208
(ault for SCSI Bus scanning test, see notes abo)-.1 F -.15(ve)-.15 G
5.208(.T).15 G .208(his allo)-5.208 F .208(ws e.g. to spec-)-.25 F
(ify to use Solaris USCSI or remote SCSI for the b)144 566.4 Q
(us scanning case.)-.2 E -.15(Fo)144 590.4 S 3.452(rt).15 G .952
(he non b)-3.452 F .952(us scanning case, a typical de)-.2 F .952
(vice speci\214cation is)-.25 F F2(de)3.452 E(v=)-.15 E F3(6,0).2 E F0
5.952(.I)3.452 G 3.451(fa\214)-5.952 G .951(lename must be)-3.451 F(pro)
144 602.4 Q .503(vided together with the numerical tar)-.15 F .504
(get speci\214cation, the \214lename is implementation speci\214c.)-.18
F .385(The correct \214lename in this case can be found in the system s\
peci\214c manuals of the tar)144 614.4 R .384(get operat-)-.18 F .398
(ing system.)144 626.4 R .398(On a)5.398 F F3 -1.77 -.55(Fr e)2.898 H
(eBSD).55 E F0 .399(system without)2.899 F F3(CAM)2.899 E F0 .399
(support, you need to use the control de)2.899 F .399(vice \(e.g.)-.25 F
F3(/de)144 638.4 Q(v/r)-.15 E(cd0.ctl)-.37 E F0 2.5(\). A).51 F
(correct de)2.5 E(vice speci\214cation in this case may be)-.25 E F2(de)
2.5 E(v=)-.15 E F3(/de)1.15 E(v/r)-.15 E(cd0.ctl:@)-.37 E F0(.)2.5 E
.572(On Linux, dri)144 662.4 R -.15(ve)-.25 G 3.072(sc).15 G .572
(onnected to a parallel port adapter are mapped to a virtual SCSI b)
-3.072 F .571(us. Dif)-.2 F(ferent)-.25 E(adapters are mapped to dif)144
674.4 Q(ferent tar)-.25 E(gets on this virtual SCSI b)-.18 E(us.)-.2 E
.526(If no)144 698.4 R F3(de)3.026 E(v)-.15 E F0 .527
(option is present,)3.027 F F2(cdr)3.027 E(ecord)-.18 E F0 .527
(will try to get the de)3.027 F .527(vice from the)-.25 F F2(CDR_DEVICE)
3.027 E F0(en)3.027 E(viron-)-.4 E(ment.)144 710.4 Q(J)72 768 Q -.25(..)
-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065(chilling V)-2.5 F(ersion 2.0)
-1.11 E(1)206.225 E EP
%%Page: 2 2
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 105.385(SCGCHECK\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(SCGCHECK\(1\))107.885 E 1.047(If the ar)144 84 R
1.047(gument to the)-.18 F/F1 10/Times-Bold@0 SF(de)3.547 E(v=)-.15 E F0
1.047(option does not contain the characters ',)3.547 F 1.047
(', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
(preted as an label name that may be found in the \214le /etc/def)144 96
Q(ault/cdrecord \(see FILES section\).)-.1 E F1(timeout=)108 112.8 Q/F2
10/Times-Italic@0 SF(#).48 E F0 .13(Set the def)144 124.8 R .13
(ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F2(#)2.63 E F0
2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
F .452(the minimum timeout used for sending SCSI commands.)144 136.8 R
.451(If a SCSI command f)5.451 F .451(ails due to a time-)-.1 F .366
(out, you may try to raise the def)144 148.8 R .366
(ault SCSI command timeout abo)-.1 F .667 -.15(ve t)-.15 H .367
(he timeout v).15 F .367(alue of the f)-.25 F(ailed)-.1 E 2.716
(command. If)144 160.8 R .216(the command runs correctly with a raised \
command timeout, please report the better)2.716 F .401(timeout v)144
172.8 R .401
(alue and the corresponding command to the author of the program.)-.25 F
.402(If no)5.402 F F2(timeout)2.902 E F0(option)2.902 E
(is present, a def)144 184.8 Q(ault timeout of 40 seconds is used.)-.1 E
F1(deb)108 201.6 Q(ug=)-.2 E F2(#,).48 E F1(-d)2.5 E F0 .386
(Set the misc deb)144 213.6 R .386(ug v)-.2 F .386(alue to # \(with deb)
-.25 F .385(ug=#\) or increment the misc deb)-.2 F .385(ug le)-.2 F -.15
(ve)-.25 G 2.885(lb).15 G 2.885(yo)-2.885 G .385(ne \(with -d\).)-2.885
F .13(If you specify)144 225.6 R F2(-dd,)2.63 E F0 .13(this equals to)
2.63 F F1(deb)2.63 E(ug=)-.2 E F2(2.).38 E F0 .13
(This may help to \214nd problems while opening a dri)5.13 F -.15(ve)
-.25 G(r).15 E .864(for libscg.)144 237.6 R .864
(as well as with sector sizes and sector types.)5.864 F(Using)5.864 E F1
(\255deb)3.364 E(ug)-.2 E F0(slo)3.363 E .863(ws do)-.25 F .863
(wn the process)-.25 F(and may be the reason for a b)144 249.6 Q(uf)-.2
E(fer underrun.)-.25 E F1(kdeb)108 266.4 Q(ug=)-.2 E F0(#,)A F1(kd=)2.5
E F0(#)A -.7(Te)144 278.4 S(ll the).7 E F1(scg)2.5 E F0(-dri)A -.15(ve)
-.25 G 2.5(rt).15 G 2.5(om)-2.5 G(odify the k)-2.5 E(ernel deb)-.1 E
(ug v)-.2 E(alue while SCSI commands are running.)-.25 E F1(\255silent)
108 295.2 Q F0(,)A F1<ad73>2.5 E F0
(Do not print out a status report for f)144 307.2 Q
(ailed SCSI commands.)-.1 E F1<ad76>108 324 Q F0 .993(Increment the le)
25.3 F -.15(ve)-.25 G 3.493(lo).15 G 3.493(fg)-3.493 G .993(eneral v)
-3.493 F .993(erbosity by one.)-.15 F .994
(This is used e.g. to display the progress of the)5.993 F(process.)144
336 Q F1<ad56>108 352.8 Q F0 .324(Increment the v)23.08 F .324
(erbose le)-.15 F -.15(ve)-.25 G 2.824(lw).15 G .324
(ith respect of SCSI command transport by one.)-2.824 F .324
(This helps to deb)5.324 F(ug)-.2 E 1.194
(problems during the process, that occur in the CD-Recorder)144 364.8 R
6.194(.I)-.55 G 3.694(fy)-6.194 G 1.194(ou get incomprehensible error)
-3.694 F .273
(messages you should use this \215ag to get more detailed output.)144
376.8 R F1(\255VV)5.273 E F0 .273(will sho)2.773 F 2.773(wd)-.25 G .273
(ata b)-2.773 F(uf)-.2 E .273(fer content)-.25 F(in addition.)144 388.8
Q(Using)5 E F1<ad56>2.5 E F0(or)2.5 E F1(\255VV)2.5 E F0(slo)2.5 E
(ws do)-.25 E(wn the process.)-.25 E F1(f=)108 405.6 Q F2(\214le)1.91 E
F0(Specify the log \214le to be used instead of)12.84 E F2 -.15(ch)2.5 G
(ec).15 E(k.lo)-.2 E(g)-.1 E F0(.).22 E/F3 10.95/Times-Bold@0 SF
(EXAMPLES)72 434.4 Q(FILES)72 446.4 Q(SEE ALSO)72 458.4 Q F1(cdr)108
470.4 Q(ecord)-.18 E F0(\(1\),)A F1 -.18(re)2.5 G(adcd).18 E F0(\(1\),)A
F1(mkisofs)2.5 E F0(\(1\),)A F1(scg)2.5 E F0(\(7\).)A F3(NO)72 499.2 Q
(TES)-.438 E F0 .456(When using)108 511.2 R F1(scgck)2.956 E(eck)-.1 E
F0 .457(with the brok)2.957 F(en)-.1 E F1 .457(Linux SCSI generic dri)
2.957 F -.1(ve)-.1 G -1(r.).1 G F0 -1.1(Yo)6.457 G 2.957(us)1.1 G .457
(hould note that)-2.957 F F1(scgcheck)2.957 E F0 .457(uses a)2.957 F
.054(hack, that tries to emulate the functionality of the scg dri)108
523.2 R -.15(ve)-.25 G 3.654 -.55(r. U).15 H(nfortunately).55 E 2.554
(,t)-.65 G .054(he sg dri)-2.554 F -.15(ve)-.25 G 2.554(ro).15 G(n)
-2.554 E F1(Linux)2.554 E F0 .053(has se)2.553 F(v-)-.25 E(eral se)108
535.2 Q -.15(ve)-.25 G(re b).15 E(ugs:)-.2 E 32.5<8349>108 552 S 2.5(tc)
-32.5 G(annot see if a SCSI command could not be sent at all.)-2.5 E
32.5<8349>108 568.8 S 2.631(tc)-32.5 G .131
(annot get the SCSI status byte.)-2.631 F F1(Scgcheck)5.131 E F0 .132
(for that reason cannot report f)2.631 F .132(ailing SCSI commands)-.1 F
(in some situations.)144 580.8 Q 32.5<8349>108 597.6 S 3.299(tc)-32.5 G
.799(annot get real DMA count of transfer)-3.299 F(.)-.55 E F1(Scgcheck)
5.798 E F0 .798(cannot tell you if there is an DMA residual)3.298 F
(count.)144 609.6 Q 32.5<8349>108 626.4 S 2.51(tc)-32.5 G .01
(annot get number of bytes v)-2.51 F .011(alid in auto sense data.)-.25
F F1(Scgcheck)5.011 E F0 .011(cannot tell you if de)2.511 F .011
(vice transfers)-.25 F(no sense data at all.)144 638.4 Q 32.5<8349>108
655.2 S 2.5(tf)-32.5 G(etches to fe)-2.5 E 2.5(wd)-.25 G
(ata in auto request sense \(CCS/SCSI-2/SCSI-3 needs >= 18\).)-2.5 E F3
(DIA)72 684 Q(GNOSTICS)-.602 E F0 2.5(At)108 696 S
(ypical error message for a SCSI command looks lik)-2.5 E(e:)-.1 E
(readcd: I/O error)144 720 Q 2.5(.t)-.55 G
(est unit ready: scsi sendcmd: no error)-2.5 E(J)72 768 Q -.25(..)-5.5 K
(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065(chilling V)-2.5 F(ersion 2.0)-1.11
E(2)206.225 E EP
%%Page: 3 3
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 105.385(SCGCHECK\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(SCGCHECK\(1\))107.885 E 2.5(CDB: 00)144 84 R
(20 00 00 00 00)2.5 E(status: 0x2 \(CHECK CONDITION\))144 96 Q
(Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 25 00 00 00 00 00)144
108 Q(Sense K)144 120 Q -.15(ey)-.25 G 2.5(:0).15 G(x5 Ille)-2.5 E -.05
(ga)-.15 G 2.5(lR).05 G(equest, Se)-2.5 E(gment 0)-.15 E
(Sense Code: 0x25 Qual 0x00 \(logical unit not supported\) Fru 0x0)144
132 Q(Sense \215ags: Blk 0 \(not v)144 144 Q(alid\))-.25 E
(cmd \214nished after 0.002s timeout 40s)144 156 Q .352
(The \214rst line gi)108 180 R -.15(ve)-.25 G 2.852(si).15 G .352
(nformation about the transport of the command.)-2.852 F .352(The te)
5.352 F .351(xt after the \214rst colon gi)-.15 F -.15(ve)-.25 G 2.851
(st).15 G(he)-2.851 E .04(error te)108 192 R .04
(xt for the system call from the vie)-.15 F 2.54(wo)-.25 G 2.54(ft)-2.54
G .041(he k)-2.54 F .041(ernel. It usually is:)-.1 F/F1 10/Times-Bold@0
SF .041(I/O err)2.541 F(or)-.18 E F0 .041(unless other problems hap-)
2.541 F .58(pen. The ne)108 204 R .58(xt w)-.15 F .58
(ords contain a short description for the SCSI command that f)-.1 F .579
(ails. The rest of the line tells)-.1 F .051(you if there were an)108
216 R 2.551(yp)-.15 G .051(roblems for the transport of the command o)
-2.551 F -.15(ve)-.15 G 2.551(rt).15 G .051(he SCSI b)-2.551 F(us.)-.2 E
F1 .051(fatal err)5.051 F(or)-.18 E F0 .052(means that)2.551 F(it w)108
228 Q(as not possible to transport the command \(i.e. no de)-.1 E
(vice present at the requested SCSI address\).)-.25 E
(The second line prints the SCSI command descriptor block for the f)108
244.8 Q(ailed command.)-.1 E .707(The third line gi)108 261.6 R -.15(ve)
-.25 G 3.207(si).15 G .707(nformation on the SCSI status code returned \
by the command, if the transport of the)-3.207 F(command succeeds.)108
273.6 Q(This is error information from the SCSI de)5 E(vice.)-.25 E
(The fourth line is a he)108 290.4 Q 2.5(xd)-.15 G
(ump of the auto request sense information for the command.)-2.5 E .846
(The \214fth line is the error te)108 307.2 R .846(xt for the sense k)
-.15 F 1.146 -.15(ey i)-.1 H 3.346(fa).15 G -.25(va)-3.546 G .846
(ilable, follo).25 F .846(wed by the se)-.25 F .846
(gment number that is only)-.15 F -.25(va)108 319.2 S .421
(lid if the command w).25 F .421(as a)-.1 F/F2 10/Times-Italic@0 SF
(copy)2.921 E F0 .421(command. If the error message is not directly rel\
ated to the current com-)2.921 F(mand, the te)108 331.2 Q(xt)-.15 E F2
(deferr)2.5 E(ed err)-.37 E(or)-.45 E F0(is appended.)2.5 E 1.278
(The sixth line is the error te)108 348 R 1.279
(xt for the sense code and the sense quali\214er if a)-.15 F -.25(va)-.2
G 3.779(ilable. If).25 F 1.279(the type of the)3.779 F(de)108 360 Q .012
(vice is kno)-.25 F .012(wn, the sense data is decoded from tables in)
-.25 F F2(scsierr)2.512 E(s.c)-.1 E F0 5.012(.T)2.822 G .012(he te)
-5.012 F .012(xt is follo)-.15 F .012(wed by the error v)-.25 F(alue)
-.25 E(for a \214eld replaceable unit.)108 372 Q 1.068(The se)108 388.8
R -.15(ve)-.25 G 1.069
(nth line prints the block number that is related to the f).15 F 1.069
(ailed command and te)-.1 F 1.069(xt for se)-.15 F -.15(ve)-.25 G 1.069
(ral error).15 F(\215ags. The block number may not be v)108 400.8 Q
(alid.)-.25 E .503(The eight line reports the timeout set up for this c\
ommand and the time that the command realy needed to)108 417.6 R
(complete.)108 429.6 Q/F3 10.95/Times-Bold@0 SF -.11(BU)72 458.4 S(GS)
.11 E(CREDITS)72 470.4 Q(MAILING LISTS)72 482.4 Q -.548(AU)72 494.4 S
(THOR).548 E F0(J)108 506.4 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G
(chilling)-2.5 E(Seestr)108 518.4 Q 2.5(.1)-.55 G(10)-2.5 E
(D-13353 Berlin)108 530.4 Q(German)108 542.4 Q(y)-.15 E
(Additional information can be found on:)108 559.2 Q(http://www)108
571.2 Q(.fokus.fhg.de/usr/schilling/cdrecord.html)-.65 E(If you ha)108
588 Q .3 -.15(ve s)-.2 H(upport questions, send them to:).15 E F1(cdr)
108 604.8 Q(ecord-support@berlios.de)-.18 E F0(or)108 616.8 Q F1(other)
2.5 E(-cd)-.37 E(write@lists.debian.or)-.15 E(g)-.1 E F0(Of you ha)108
633.6 Q .3 -.15(ve d)-.2 H(e\214nitely found a b).15 E
(ug, send a mail to:)-.2 E F1(cdr)108 650.4 Q(ecord-de)-.18 E -.1(ve)
-.15 G(lopers@berlios.de).1 E F0(or)108 662.4 Q F1(schilling@f)2.5 E
(okus.fhg)-.25 E(.de)-.15 E F0 1.6 -.8(To s)108 679.2 T(ubscribe, use:)
.8 E F1(http://lists.berlios.de/mailman/listinf)108 696 Q(o/cdr)-.25 E
(ecord-de)-.18 E -.1(ve)-.15 G(lopers).1 E F0(or)108 708 Q F1
(http://lists.berlios.de/mailman/listinf)2.5 E(o/cdr)-.25 E
(ecord-support)-.18 E F0(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)
-.18 G 153.065(chilling V)-2.5 F(ersion 2.0)-1.11 E(3)206.225 E EP
%%Trailer
end
%%EOF