%!PS-Adobe-3.0
%%Creator: groff version 1.17.2
%%CreationDate: Tue Dec 24 17:02:56 2002
%%DocumentNeededResources: font Times-Roman
%%+ font Times-Bold
%%+ font Times-Italic
%%DocumentSuppliedResources: procset grops 1.17 2
%%Pages: 5
%%PageOrder: Ascend
%%Orientation: Portrait
%%EndComments
%%BeginProlog
%%BeginResource: procset grops 1.17 2
/setpacking where{
pop
currentpacking
true setpacking
}if
/grops 120 dict dup begin
/SC 32 def
/A/show load def
/B{0 SC 3 -1 roll widthshow}bind def
/C{0 exch ashow}bind def
/D{0 exch 0 SC 5 2 roll awidthshow}bind def
/E{0 rmoveto show}bind def
/F{0 rmoveto 0 SC 3 -1 roll widthshow}bind def
/G{0 rmoveto 0 exch ashow}bind def
/H{0 rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/I{0 exch rmoveto show}bind def
/J{0 exch rmoveto 0 SC 3 -1 roll widthshow}bind def
/K{0 exch rmoveto 0 exch ashow}bind def
/L{0 exch rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/M{rmoveto show}bind def
/N{rmoveto 0 SC 3 -1 roll widthshow}bind def
/O{rmoveto 0 exch ashow}bind def
/P{rmoveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/Q{moveto show}bind def
/R{moveto 0 SC 3 -1 roll widthshow}bind def
/S{moveto 0 exch ashow}bind def
/T{moveto 0 exch 0 SC 5 2 roll awidthshow}bind def
/SF{
findfont exch
[exch dup 0 exch 0 exch neg 0 0]makefont
dup setfont
[exch/setfont cvx]cvx bind def
}bind def
/MF{
findfont
[5 2 roll
0 3 1 roll
neg 0 0]makefont
dup setfont
[exch/setfont cvx]cvx bind def
}bind def
/level0 0 def
/RES 0 def
/PL 0 def
/LS 0 def
/MANUAL{
statusdict begin/manualfeed true store end
}bind def
/PLG{
gsave newpath clippath pathbbox grestore
exch pop add exch pop
}bind def
/BP{
/level0 save def
1 setlinecap
1 setlinejoin
72 RES div dup scale
LS{
90 rotate
}{
0 PL translate
}ifelse
1 -1 scale
}bind def
/EP{
level0 restore
showpage
}bind def
/DA{
newpath arcn stroke
}bind def
/SN{
transform
.25 sub exch .25 sub exch
round .25 add exch round .25 add exch
itransform
}bind def
/DL{
SN
moveto
SN
lineto stroke
}bind def
/DC{
newpath 0 360 arc closepath
}bind def
/TM matrix def
/DE{
TM currentmatrix pop
translate scale newpath 0 0 .5 0 360 arc closepath
TM setmatrix
}bind def
/RC/rcurveto load def
/RL/rlineto load def
/ST/stroke load def
/MT/moveto load def
/CL/closepath load def
/FL{
currentgray exch setgray fill setgray
}bind def
/BL/fill load def
/LW/setlinewidth load def
/RE{
findfont
dup maxlength 1 index/FontName known not{1 add}if dict begin
{
1 index/FID ne{def}{pop pop}ifelse
}forall
/Encoding exch def
dup/FontName exch def
currentdict end definefont pop
}bind def
/DEFS 0 def
/EBEGIN{
moveto
DEFS begin
}bind def
/EEND/end load def
/CNT 0 def
/level1 0 def
/PBEGIN{
/level1 save def
translate
div 3 1 roll div exch scale
neg exch neg exch translate
0 setgray
0 setlinecap
1 setlinewidth
0 setlinejoin
10 setmiterlimit
[]0 setdash
/setstrokeadjust where{
pop
false setstrokeadjust
}if
/setoverprint where{
pop
false setoverprint
}if
newpath
/CNT countdictstack def
userdict begin
/showpage{}def
}bind def
/PEND{
clear
countdictstack CNT sub{end}repeat
level1 restore
}bind def
end def
/setpacking where{
pop
setpacking
}if
%%EndResource
%%IncludeResource: font Times-Roman
%%IncludeResource: font Times-Bold
%%IncludeResource: font Times-Italic
grops begin/DEFS 1 dict def DEFS begin/u{.001 mul}bind def end/RES 72
def/PL 841.89 def/LS false def/ENC0[/asciicircum/asciitilde/Scaron
/Zcaron/scaron/zcaron/Ydieresis/trademark/quotesingle/.notdef/.notdef
/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef
/.notdef/.notdef/.notdef/space/exclam/quotedbl/numbersign/dollar/percent
/ampersand/quoteright/parenleft/parenright/asterisk/plus/comma/hyphen
/period/slash/zero/one/two/three/four/five/six/seven/eight/nine/colon
/semicolon/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N/O
/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright/circumflex
/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y
/z/braceleft/bar/braceright/tilde/.notdef/quotesinglbase/guillemotleft
/guillemotright/bullet/florin/fraction/perthousand/dagger/daggerdbl
/endash/emdash/ff/fi/fl/ffi/ffl/dotlessi/dotlessj/grave/hungarumlaut
/dotaccent/breve/caron/ring/ogonek/quotedblleft/quotedblright/oe/lslash
/quotedblbase/OE/Lslash/.notdef/exclamdown/cent/sterling/currency/yen
/brokenbar/section/dieresis/copyright/ordfeminine/guilsinglleft
/logicalnot/minus/registered/macron/degree/plusminus/twosuperior
/threesuperior/acute/mu/paragraph/periodcentered/cedilla/onesuperior
/ordmasculine/guilsinglright/onequarter/onehalf/threequarters
/questiondown/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE
/Ccedilla/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex
/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis
/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn
/germandbls/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide/oslash
/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis]def
/Times-Italic@0 ENC0/Times-Italic RE/Times-Bold@0 ENC0/Times-Bold RE
/Times-Roman@0 ENC0/Times-Roman RE
%%EndProlog
%%Page: 1 1
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 117.615(READCD\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(READCD\(1\))120.115 E/F1 10.95/Times-Bold@0 SF
-.219(NA)72 84 S(ME).219 E F0
(readcd \255 read or write data Compact Discs)108 96 Q F1(SYNOPSIS)72
112.8 Q/F2 10/Times-Bold@0 SF -.18(re)108 124.8 S(adcd de).18 E(v=)-.15
E/F3 10/Times-Italic@0 SF(de).35 E(vice)-.15 E F0([)2.5 E F3(options)2.5
E F0(])2.5 E F1(DESCRIPTION)72 153.6 Q F2(Readcd)108 165.6 Q F0
(is used to read or write Compact Discs.)2.5 E(The)108 182.4 Q F3(de)
3.065 E(vice)-.15 E F0 .565(refers to)3.065 F F3(scsib)3.065 E(us)-.2 E
F0(/).27 E F3(tar).13 E -.1(ge)-.37 G(t).1 E F0(/).68 E F3(lun).09 E F0
.565(of the dri)3.065 F -.15(ve)-.25 G 3.064(.C).15 G .564
(ommunication on)-3.064 F F3(SunOS)3.064 E F0 .564
(is done with the SCSI gen-)3.064 F 1.02(eral dri)108 194.4 R -.15(ve)
-.25 G(r).15 E F2(scg)3.52 E(.)-.15 E F0 1.02
(Other operating systems are using a library simulation of this dri)6.02
F -.15(ve)-.25 G 4.62 -.55(r. P).15 H 1.02(ossible syntax is:).55 F F2
(de)108 206.4 Q(v=)-.15 E F3(scsib)3.228 E(us)-.2 E F0(,).27 E F3(tar)
.13 E -.1(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0(or)3.227 E F2(de)
3.227 E(v=)-.15 E F3(tar)3.227 E -.1(ge)-.37 G(t).1 E F0(,).68 E F3(lun)
.09 E F0 5.727(.I).24 G 3.227(nt)-5.727 G .727(he latter case, the dri)
-3.227 F 1.027 -.15(ve h)-.25 H .727(as to be connected to the def).15 F
(ault)-.1 E .85(SCSI b)108 218.4 R .85(us of the machine.)-.2 F F3
(Scsib)5.85 E(us)-.2 E F0(,).27 E F3(tar)3.35 E -.1(ge)-.37 G(t).1 E F0
(and)3.351 E F3(lun)3.351 E F0 .851(are inte)3.351 F .851(ger numbers.)
-.15 F .851(Some operating systems or SCSI)5.851 F .338(transport imple\
mentations may require to specify a \214lename in addition.)108 230.4 R
.337(In this case the correct syntax for)5.337 F 2.308(the de)108 242.4
R 2.308(vice is:)-.25 F F2(de)4.808 E(v=)-.15 E F3(de)4.808 E(vicename)
-.15 E F0(:).18 E F3(scsib).34 E(us)-.2 E F0(,).27 E F3(tar).13 E -.1
(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0(or)4.808 E F2(de)4.808 E
(v=)-.15 E F3(de)4.808 E(vicename)-.15 E F0(:).18 E F3(tar).13 E -.1(ge)
-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0 7.308(.I).24 G 4.809(ft)-7.308
G 2.309(he name of the)-4.809 F(de)108 254.4 Q .465
(vice node that has been speci\214ed on such a system refers to e)-.25 F
.465(xactly one SCSI de)-.15 F .465(vice, a shorthand in the)-.25 F
(form)108 266.4 Q F2(de)2.646 E(v=)-.15 E F3(de)2.646 E(vicename)-.15 E
F0(:).18 E F3(@)-.68 E F0(or)2.646 E F2(de)2.646 E(v=)-.15 E F3(de)2.647
E(vicename)-.15 E F0(:).18 E F3(@)-.68 E F0(,)A F3(lun).09 E F0 .147
(may be used instead of)2.647 F F2(de)2.647 E(v=)-.15 E F3(de)2.647 E
(vicename)-.15 E F0(:).18 E F3(scsib).34 E(us)-.2 E F0(,).27 E F3(tar)
.13 E(-)-.2 E -.1(ge)108 278.4 S(t).1 E F0(,).68 E F3(lun)A F0(.).24 E
2.32 -.8(To a)108 307.2 T .72(ccess remote SCSI de).8 F .72
(vices, you need to prepend the SCSI de)-.25 F .72
(vice name by a remote de)-.25 F .72(vice indicator)-.25 F(.)-.55 E
(The remote de)108 319.2 Q(vice indicator is either)-.25 E F2(REMO)2.5 E
(TE:)-.4 E F3(user@host:).08 E F0(or)2.5 E F2(REMO)5 E(TE:)-.4 E F3
(host:).31 E F0 3.273(Av)108 331.2 S .773(alid remote SCSI de)-3.523 F
.773(vice name may be:)-.25 F F2(REMO)3.273 E(TE:)-.4 E F3(user@host:)
.08 E F0 .773(to allo)3.273 F 3.274(wr)-.25 G .774(emote SCSI b)-3.274 F
.774(us scanning or)-.2 F F2(REMO)108 343.2 Q(TE:)-.4 E F3
(user@host:1,0,0)A F0(to access the SCSI de)2.5 E(vice at)-.25 E F3
(host)2.5 E F0(connected to SCSI b)2.5 E(us # 1,tar)-.2 E(get 0 lun 0.)
-.18 E 3.074 -.8(To a)108 372 T 1.474(ccess SCSI de).8 F 1.474
(vices via alternate transport layers, you need to prepend the SCSI de)
-.25 F 1.473(vice name by a)-.25 F .057(transport layer indicator)108
384 R 5.057(.T)-.55 G .057
(he transport layer indicator may be something lik)-5.057 F(e)-.1 E F2
(USCSI:)2.558 E F0(or)2.558 E F2 -1.5 -.95(AT A)2.558 H(PI:).95 E F0
5.058(.T)C 2.558(og)-5.858 G .058(et a)-2.558 F
(list of supported transport layers for your platform, use)108 396 Q F2
(de)2.5 E(v=)-.15 E F3(HELP)2.5 E F0(:).44 E 1.862 -.8(To m)108 424.8 T
(ak).8 E(e)-.1 E F2 -.18(re)2.762 G(adcd).18 E F0 .262(portable to all)
2.762 F/F4 8/Times-Roman@0 SF(UNIX)2.761 E F0 .261
(platforms, the syntax)2.761 F F2(de)2.761 E(v=)-.15 E F3(de)2.761 E
(vicename)-.15 E F0(:).18 E F3(scsib).34 E(us)-.2 E F0(,).27 E F3(tar)
.13 E -.1(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0 .261(is preferred)
2.761 F .754(as is hides OS speci\214c kno)108 436.8 R .755
(wledge about de)-.25 F .755(vice names from the user)-.25 F 5.755(.A)
-.55 G .755(speci\214c OS must not necessarily)-2.5 F(support a w)108
448.8 Q(ay to specify a real de)-.1 E(vice \214le name nor a w)-.25 E
(ay to specify)-.1 E F3(scsib)2.5 E(us)-.2 E F0(,).27 E F3(tar).13 E -.1
(ge)-.37 G(t).1 E F0(,).68 E F3(lun).09 E F0(.).24 E F3(Scsib)108 477.6
Q(us)-.2 E F0 3.257(0i)3.257 G 3.257(st)-3.257 G .757(he def)-3.257 F
.757(ault SCSI b)-.1 F .757(us on the machine. W)-.2 F .756
(atch the boot messages for more information or look)-.8 F(into)108
489.6 Q F2(/v)2.995 E(ar/adm/messages)-.1 E F0 .496
(for more information about the SCSI con\214guration of your machine.)
2.995 F .496(If you ha)5.496 F -.15(ve)-.2 G 2.158
(problems to \214gure out what v)108 501.6 R 2.158(alues for)-.25 F F3
(scsib)4.658 E(us)-.2 E F0(,).27 E F3(tar).13 E -.1(ge)-.37 G(t).1 E F0
(,).68 E F3(lun).09 E F0 2.158(should be used, try the)4.658 F F2
(\255scanb)4.658 E(us)-.2 E F0 2.158(option of)4.658 F F2(cdr)108 513.6
Q(ecord)-.18 E F0(.)A F1(OPTIONS)72 542.4 Q F0 .483(If no options e)108
554.4 R .483(xcept the)-.15 F F3(de)2.983 E(v=)-.15 E F0 .483(option ha)
2.983 F .783 -.15(ve b)-.2 H .484(een speci\214ed,).15 F F2 -.18(re)
2.984 G(adcd).18 E F0 .484(goes into interacti)2.984 F .784 -.15(ve m)
-.25 H 2.984(ode. Select).15 F 2.984(ap)2.984 G(ri-)-2.984 E
(mary function and then follo)108 566.4 Q 2.5(wt)-.25 G
(he instructions.)-2.5 E F2<ad76>108 588 Q(ersion)-.1 E F0(Print v)144
600 Q(ersion information and e)-.15 E(xit.)-.15 E F2(de)108 616.8 Q(v=)
-.15 E F3(tar).13 E -.1(ge)-.37 G(t).1 E F0 .142(Sets the SCSI tar)144
628.8 R .142(get for the dri)-.18 F -.15(ve)-.25 G 2.642(,s).15 G .142
(ee notes abo)-2.642 F -.15(ve)-.15 G 5.142(.A).15 G .142(typical de)
-2.5 F .141(vice speci\214cation is)-.25 F F2(de)2.641 E(v=)-.15 E F3
(6,0).2 E F0 5.141(.I)2.641 G 2.641(fa)-5.141 G .533
(\214lename must be pro)144 640.8 R .533
(vided together with the numerical tar)-.15 F .533
(get speci\214cation, the \214lename is imple-)-.18 F .497
(mentation speci\214c.)144 652.8 R .497(The correct \214lename in this \
case can be found in the system speci\214c manuals)5.497 F .637
(of the tar)144 664.8 R .637(get operating system.)-.18 F .637(On a)
5.637 F F3 -1.77 -.55(Fr e)3.137 H(eBSD).55 E F0 .638(system without)
3.137 F F3(CAM)3.138 E F0 .638(support, you need to use the)3.138 F
4.624(control de)144 676.8 R 4.624(vice \(e.g.)-.25 F F3(/de)9.624 E
(v/r)-.15 E(cd0.ctl)-.37 E F0 7.124(\). A).51 F 4.623(correct de)7.123 F
4.623(vice speci\214cation in this case may be)-.25 F F2(de)144 688.8 Q
(v=)-.15 E F3(/de)1.15 E(v/r)-.15 E(cd0.ctl:@)-.37 E F0(.)2.5 E .571
(On Linux, dri)144 712.8 R -.15(ve)-.25 G 3.072(sc).15 G .572
(onnected to a parallel port adapter are mapped to a virtual SCSI b)
-3.072 F .572(us. Dif)-.2 F(ferent)-.25 E(adapters are mapped to dif)144
724.8 Q(ferent tar)-.25 E(gets on this virtual SCSI b)-.18 E(us.)-.2 E
(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065
(chilling V)-2.5 F(ersion 2.0)-1.11 E(1)206.225 E EP
%%Page: 2 2
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 117.615(READCD\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(READCD\(1\))120.115 E .527(If no)144 84 R/F1 10
/Times-Italic@0 SF(de)3.027 E(v)-.15 E F0 .527(option is present,)3.027
F/F2 10/Times-Bold@0 SF(cdr)3.027 E(ecord)-.18 E F0 .527
(will try to get the de)3.027 F .527(vice from the)-.25 F F2(CDR_DEVICE)
3.026 E F0(en)3.026 E(viron-)-.4 E(ment.)144 96 Q 1.046(If the ar)144
120 R 1.046(gument to the)-.18 F F2(de)3.547 E(v=)-.15 E F0 1.047
(option does not contain the characters ',)3.547 F 1.047
(', '/', '@' or ':', it is inter)-.7 F(-)-.2 E
(preted as an label name that may be found in the \214le /etc/def)144
132 Q(ault/cdrecord \(see FILES section\).)-.1 E F2(timeout=)108 148.8 Q
F1(#).48 E F0 .13(Set the def)144 160.8 R .13
(ault SCSI command timeout v)-.1 F .13(alue to)-.25 F F1(#)2.63 E F0
2.63(seconds. The)3.53 F(def)2.63 E .13(ault SCSI command timeout is)-.1
F .451(the minimum timeout used for sending SCSI commands.)144 172.8 R
.451(If a SCSI command f)5.451 F .452(ails due to a time-)-.1 F .367
(out, you may try to raise the def)144 184.8 R .366
(ault SCSI command timeout abo)-.1 F .666 -.15(ve t)-.15 H .366
(he timeout v).15 F .366(alue of the f)-.25 F(ailed)-.1 E 2.715
(command. If)144 196.8 R .216(the command runs correctly with a raised \
command timeout, please report the better)2.715 F .402(timeout v)144
208.8 R .401
(alue and the corresponding command to the author of the program.)-.25 F
.401(If no)5.401 F F1(timeout)2.901 E F0(option)2.901 E
(is present, a def)144 220.8 Q(ault timeout of 40 seconds is used.)-.1 E
F2(deb)108 237.6 Q(ug=)-.2 E F1(#,).48 E F2(-d)2.5 E F0 .385
(Set the misc deb)144 249.6 R .385(ug v)-.2 F .385(alue to # \(with deb)
-.25 F .386(ug=#\) or increment the misc deb)-.2 F .386(ug le)-.2 F -.15
(ve)-.25 G 2.886(lb).15 G 2.886(yo)-2.886 G .386(ne \(with -d\).)-2.886
F .13(If you specify)144 261.6 R F1(-dd,)2.63 E F0 .13(this equals to)
2.63 F F2(deb)2.63 E(ug=)-.2 E F1(2.).38 E F0 .13
(This may help to \214nd problems while opening a dri)5.13 F -.15(ve)
-.25 G(r).15 E .863(for libscg.)144 273.6 R .864
(as well as with sector sizes and sector types.)5.863 F(Using)5.864 E F2
(\255deb)3.364 E(ug)-.2 E F0(slo)3.364 E .864(ws do)-.25 F .864
(wn the process)-.25 F(and may be the reason for a b)144 285.6 Q(uf)-.2
E(fer underrun.)-.25 E F2(kdeb)108 302.4 Q(ug=)-.2 E F0(#,)A F2(kd=)2.5
E F0(#)A -.7(Te)144 314.4 S(ll the).7 E F2(scg)2.5 E F0(-dri)A -.15(ve)
-.25 G 2.5(rt).15 G 2.5(om)-2.5 G(odify the k)-2.5 E(ernel deb)-.1 E
(ug v)-.2 E(alue while SCSI commands are running.)-.25 E F2(\255silent)
108 331.2 Q F0(,)A F2<ad73>2.5 E F0
(Do not print out a status report for f)144 343.2 Q
(ailed SCSI commands.)-.1 E F2<ad76>108 360 Q F0 .994(Increment the le)
25.3 F -.15(ve)-.25 G 3.494(lo).15 G 3.494(fg)-3.494 G .994(eneral v)
-3.494 F .994(erbosity by one.)-.15 F .993
(This is used e.g. to display the progress of the)5.994 F(process.)144
372 Q F2<ad56>108 388.8 Q F0 .324(Increment the v)23.08 F .324
(erbose le)-.15 F -.15(ve)-.25 G 2.824(lw).15 G .324
(ith respect of SCSI command transport by one.)-2.824 F .324
(This helps to deb)5.324 F(ug)-.2 E 1.194
(problems during the process, that occur in the CD-Recorder)144 400.8 R
6.194(.I)-.55 G 3.694(fy)-6.194 G 1.193(ou get incomprehensible error)
-3.694 F .273
(messages you should use this \215ag to get more detailed output.)144
412.8 R F2(\255VV)5.273 E F0 .273(will sho)2.773 F 2.773(wd)-.25 G .274
(ata b)-2.773 F(uf)-.2 E .274(fer content)-.25 F(in addition.)144 424.8
Q(Using)5 E F2<ad56>2.5 E F0(or)2.5 E F2(\255VV)2.5 E F0(slo)2.5 E
(ws do)-.25 E(wn the process.)-.25 E F2(f=)108 441.6 Q F1(\214le)1.91 E
F0 .471(Specify the \214lename where the output should be written or th\
e inout should be tak)12.84 F .47(en from. Using)-.1 F
('-' as \214lename will cause)144 453.6 Q F2 -.18(re)2.5 G(adcd).18 E F0
(to use)2.5 E F2(stdout)2.5 E F0(resp.)2.5 E F2(stdin)2.5 E F0(.)A F2
<ad77>108 470.4 Q F0
(Switch to write mode. If this option is not present,)23.08 E F2 -.18
(re)2.5 G(adcd).18 E F0(reads from the speci\214ed de)2.5 E(vice.)-.25 E
F2(\255c2scan)108 487.2 Q F0 .071
(Scans the whole CD or the range speci\214ed by the)144 499.2 R F2
(sectors=)2.571 E F1 -.15(ra)C(ng).15 E(e)-.1 E F0 .071
(for C2 errors. C2 errors are errors)2.571 F .085(that are uncorrectabl\
e after the second stage of the 24/28 + 28/32 Reed Solomon correction s\
ystem)144 511.2 R 1.082(at audio le)144 523.2 R -.15(ve)-.25 G 3.583
(l\().15 G 1.083(2352 bytes sector size\). If an audio CD has C2 errors\
, interpolation is needed to)-3.583 F 2.191(hide the errors. If a data \
CD has C2 errors, these errors are in most cases corrected by the)144
535.2 R .157(ECC/EDC code that mak)144 547.2 R .158
(es 2352 bytes out of 2048 data bytes. The ECC/EDC code should be able)
-.1 F(to correct about 100 C2 error bytes per sector)144 559.2 Q(.)-.55
E .302(If you \214nd C2 errors you may w)144 583.2 R .302
(ant to reduce the speed using the)-.1 F F2(speed=)2.801 E F0 .301
(option as C2 errors may)2.801 F
(be a result of dynamic unbalance on the medium.)144 595.2 Q F2
(sectors=)108 612 Q F1 -.15(ra)C(ng).15 E(e)-.1 E F0 .349
(Specify a sector range that should be read.)144 624 R .349
(The range is speci\214ed by the starting sector number)5.349 F 2.849
(,a)-.4 G 1.891(minus sign and the ending sector number)144 636 R 6.891
(.T)-.55 G 1.89(he end sector is not included in the list, so)-6.891 F
F2(sec-)4.39 E(tors=)144 648 Q F0(0-0 will not read an)A
(ything and may be used to check for a CD in the dri)-.15 E -.15(ve)-.25
G(.).15 E F2(speed=)108 664.8 Q F0(#)A .1(Set the speed f)144 676.8 R .1
(actor of the read or write process to #.)-.1 F 2.601(#i)5.101 G 2.601
(sa)-2.601 G 2.601(ni)-2.601 G(nte)-2.601 E(ger)-.15 E 2.601(,r)-.4 G
.101(epresenting a multiple of the)-2.601 F 1.548(audio speed.)144 688.8
R 1.548(This is about 150 KB/s for CD-R)6.548 F 1.547
(OM and about 172 KB/s for CD-Audio.)-.4 F 1.547(If no)6.547 F F1(speed)
144 700.8 Q F0 .134(option is present,)2.634 F F2 -.18(re)2.634 G(adcd)
.18 E F0 .134(will use maximum speed.)2.634 F .135
(Only MMC compliant dri)5.134 F -.15(ve)-.25 G 2.635(sw).15 G .135
(ill bene-)-2.635 F(\214t from this option.)144 712.8 Q
(The speed of non MMC dri)5 E -.15(ve)-.25 G 2.5(si).15 G 2.5(sn)-2.5 G
(ot changed.)-2.5 E(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18
G 153.065(chilling V)-2.5 F(ersion 2.0)-1.11 E(2)206.225 E EP
%%Page: 3 3
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 117.615(READCD\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(READCD\(1\))120.115 E(Using a lo)144 84 Q
(wer speed may increase the readability of a CD or D)-.25 E(VD.)-.4 E/F1
10/Times-Bold@0 SF(\255notrunc)108 100.8 Q F0
(Do not truncate the output\214le when opening it.)144 112.8 Q F1
(\255fulltoc)108 129.6 Q F0(Retrie)144 141.6 Q .3 -.15(ve a f)-.25 H
(ull T).15 E(OC from the current disk and print it in he)-.18 E(x.)-.15
E F1(\255clone)108 158.4 Q F0 .002
(Do a clone read. Read the CD with all sub-channel data and a full T)
8.08 F 2.502(OC. The)-.18 F .002(full T)2.502 F .002(OC data will be)
-.18 F -.2(bu)144 170.4 S 2.5(ti).2 G
(nto a \214le with similar name as with the)-2.5 E F1(f=)2.5 E F0
(option b)2.5 E(ut the suf)-.2 E<8c78>-.25 E F1(.toc)2.5 E F0(added.)2.5
E F1(\255noerr)108 187.2 Q(or)-.18 E F0 .997
(Do not abort if the high le)144 199.2 R -.15(ve)-.25 G 3.497(le).15 G
.997(rror checking in)-3.497 F F1 -.18(re)3.497 G(adcd).18 E F0 .997
(found an uncorrectable error in the data)3.497 F(stream.)144 211.2 Q F1
(\255nocorr)108 228 Q F0 .309(Switch the dri)144 240 R .609 -.15(ve i)
-.25 H .308(nto a mode where it ignores read errors in data sectors tha\
t are a result of uncor).15 F(-)-.2 E 1.361
(rectable ECC/EDC errors before reading.)144 252 R(If)6.361 E F1 -.18
(re)3.861 G(adcd).18 E F0 1.362(completes, the error reco)3.862 F -.15
(ve)-.15 G 1.362(ry mode of the).15 F(dri)144 264 Q .3 -.15(ve i)-.25 H
2.5(ss).15 G(witched back to the remembered old mode.)-2.5 E F1 -.18(re)
108 280.8 S(tries=).18 E/F2 10/Times-Italic@0 SF(#).48 E F0 .07
(Set the retry count for high le)144 292.8 R -.15(ve)-.25 G 2.57(lr).15
G .07(etries in)-2.57 F F1 -.18(re)2.57 G(adcd).18 E F0(to)2.57 E F2(#)
2.569 E F0 5.069(.T).9 G .069(he def)-5.069 F .069
(ault is to do 128 retries which may)-.1 F(be too much if you lik)144
304.8 Q 2.5(et)-.1 G 2.5(or)-2.5 G(ead a CD with man)-2.5 E 2.5(yu)-.15
G(nreadable sectors.)-2.5 E F1<ad6f>108 321.6 Q -.1(ve)-.1 G(rhead).1 E
F0 1.845(Meter the SCSI command o)144 333.6 R -.15(ve)-.15 G 1.845
(rhead time.).15 F 1.845(This is done by e)6.845 F -.15(xe)-.15 G 1.846
(cuting se).15 F -.15(ve)-.25 G 1.846(ral commands 1000).15 F .225
(times and printing the total time used. If you di)144 345.6 R .225
(vide the displayed times by 1000, you get the a)-.25 F -.15(ve)-.2 G
-.2(r-).15 G(age o)144 357.6 Q -.15(ve)-.15 G
(rhead time for a single command.).15 E/F3 10.95/Times-Bold@0 SF
(EXAMPLES)72 374.4 Q F0 -.15(Fo)108 386.4 S 4.105(ra).15 G 1.605(ll e)
-4.105 F 1.605(xamples belo)-.15 F 2.905 -.65(w, i)-.25 H 4.105(tw).65 G
1.605(ill be assumed that the dri)-4.105 F 1.905 -.15(ve i)-.25 H 4.105
(sc).15 G 1.606(onnected to the primary SCSI b)-4.105 F 1.606(us of the)
-.2 F(machine. The SCSI tar)108 398.4 Q(get id is set to 2.)-.18 E 1.6
-.8(To r)108 415.2 T(ead the complete media from a CD-R).8 E
(OM writing the data to the \214le)-.4 E F2(cdima)2.5 E -.1(ge)-.1 G(.r)
-.05 E(aw)-.15 E F0(:).31 E(readcd de)118 432 Q(v=2,0 f=cdimage.ra)-.25
E(w)-.15 E 1.6 -.8(To r)108 448.8 T
(ead sectors from range 150 ... 10000 from a CD-R).8 E
(OM writing the data to the \214le)-.4 E F2(cdima)2.5 E -.1(ge)-.1 G(.r)
-.05 E(aw)-.15 E F0(:).31 E(readcd de)118 465.6 Q
(v=2,0 sectors=150-10000 f=cdimage.ra)-.25 E(w)-.15 E 1.6 -.8(To w)108
482.4 T(rite the data from the \214le).8 E F2(cdima)2.5 E -.1(ge)-.1 G
(.r)-.05 E(aw)-.15 E F0(\(e.g. a \214lesystem image from)2.5 E F1
(mkisofs)2.5 E F0 2.5(\)t)C 2.5(oaD)-2.5 G(VD-RAM, call:)-2.9 E
(readcd de)118 499.2 Q(v=2,0 -w f=cdimage.ra)-.25 E(w)-.15 E F3(ENVIR)72
528 Q(ONMENT)-.329 E F1(RSH)108 540 Q F0 .55(If the)15.44 F F1(RSH)3.05
E F0(en)3.05 E .549
(vironment is present, the remote connection will not be created via)-.4
F F1 -.18(rc)3.049 G(md).18 E F0 .549(\(3\) b)B .549(ut by)-.2 F .578
(calling the program pointed to by)144 552 R F1(RSH)3.079 E F0 5.579(.U)
C .579(se e.g.)-5.579 F F1(RSH=)5.579 E F0 .579
(/usr/bin/ssh to create a secure shell con-)B(nection.)144 564 Q .87
(Note that this forces)144 588 R F1(cdr)3.37 E(ecord)-.18 E F0 .869
(to create a pipe to the)3.37 F F1(rsh\(1\))3.369 E F0 .869
(program and disallo)3.369 F(ws)-.25 E F1(cdr)3.369 E(ecord)-.18 E F0
(to)3.369 E .28(directly access the netw)144 600 R .28(ork sock)-.1 F
.28(et to the remote serv)-.1 F(er)-.15 E 5.281(.T)-.55 G .281(his mak)
-5.281 F .281(es it impossible to set up perfor)-.1 F(-)-.2 E .813
(mance parameters and slo)144 612 R .813(ws do)-.25 F .813
(wn the connection compared to a)-.25 F F1 -.18(ro)3.313 G(ot).18 E F0
(initiated)3.313 E F1 -.18(rc)3.313 G(md\(3\)).18 E F0(connec-)3.313 E
(tion.)144 624 Q F1(RSCSI)108 640.8 Q F0 3.942(If the)6.55 F F1(RSCSI)
6.442 E F0(en)6.443 E 3.943(vironment is present, the remote SCSI serv)
-.4 F 3.943(er will not be the program)-.15 F F1(/opt/schily/sbin/rscsi)
144 652.8 Q F0 -.2(bu)3.737 G 3.737(tt).2 G 1.236
(he program pointed to by)-3.737 F F1(RSCSI)3.736 E F0 6.236(.N)C 1.236
(ote that the remote SCSI serv)-6.236 F(er)-.15 E .553(program name wil\
l be ignored if you log in using an account that has been created with \
a remote)144 664.8 R(SCSI serv)144 676.8 Q(er program as login shell.)
-.15 E F3(FILES)72 693.6 Q(SEE ALSO)72 705.6 Q F1(cdr)108 717.6 Q(ecord)
-.18 E F0(\(1\),)A F1(mkisofs)2.5 E F0(\(1\),)A F1(scg)2.5 E F0(\(7\),)A
F1(fbk)2.5 E F0(\(7\),)A F1 -.18(rc)2.5 G(md).18 E F0(\(3\),)A F1(ssh)
2.5 E F0(\(1\).)A(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G
153.065(chilling V)-2.5 F(ersion 2.0)-1.11 E(3)206.225 E EP
%%Page: 4 4
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 117.615(READCD\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(READCD\(1\))120.115 E/F1 10.95/Times-Bold@0 SF(NO)
72 84 Q(TES)-.438 E F0 .511(If you don')108 96 R 3.011(tw)-.18 G .511
(ant to allo)-3.111 F 3.011(wu)-.25 G .511
(sers to become root on your system,)-3.011 F/F2 10/Times-Bold@0 SF -.18
(re)3.01 G(adcd).18 E F0 .51(may safely be installed suid root.)3.01 F
.865(This allo)108 108 R .865
(ws all users or a group of users with no root pri)-.25 F(vile)-.25 E
.866(ges to use)-.15 F F2 -.18(re)3.366 G 3.366(adcd. Readcd).18 F F0
.866(in this case will)3.366 F(only allo)108 120 Q 2.5(wa)-.25 G
(ccess to CD-R)-2.5 E(OM type dri)-.4 E -.15(ve)-.25 G(s- T).15 E 2.5
(og)-.8 G -2.15 -.25(iv e)-2.5 H(all user access to use)2.75 E F2 -.18
(re)2.5 G(adcd,).18 E F0(enter:)2.5 E(cho)144 136.8 Q
(wn root /usr/local/bin/readcd)-.25 E(chmod 4711 /usr/local/bin/readcd)
144 148.8 Q 1.6 -.8(To g)108 165.6 T -2.15 -.25(iv e).8 H 2.5(ar)2.75 G
(estricted group of users access to)-2.5 E F2 -.18(re)2.5 G(adcd).18 E
F0(enter:)2.5 E(cho)144 182.4 Q(wn root /usr/local/bin/readcd)-.25 E
(chgrp cdb)144 194.4 Q(urners /usr/local/bin/readcd)-.2 E
(chmod 4710 /usr/local/bin/readcd)144 206.4 Q(and add a group)108 223.2
Q/F3 10/Times-Italic@0 SF(cdb)2.5 E(urner)-.2 E(s)-.1 E F0
(on your system.)2.5 E(Ne)108 240 Q -.15(ve)-.25 G 3.03(rg).15 G -2.15
-.25(iv e)-3.03 H .53(write permissions for non root users to the)3.28 F
F3(/de)3.03 E(v/scg?)-.15 E F0(de)5.53 E .53(vices unless you w)-.25 F
.53(ould allo)-.1 F 3.03(wa)-.25 G -.15(ny)-3.03 G(body).15 E
(to read/write/format all your disks.)108 252 Q -1.1(Yo)108 268.8 S
3.356(us)1.1 G .856(hould not connect old dri)-3.356 F -.15(ve)-.25 G
3.356(st).15 G .857
(hat do not support disconnect/reconnect to either the SCSI b)-3.356 F
.857(us that is)-.2 F(connected to the CD-Recorder or the source disk.)
108 280.8 Q .021(When using)108 297.6 R F2 -.18(re)2.521 G(adcd).18 E F0
.021(with the brok)2.521 F(en)-.1 E F2 .021(Linux SCSI generic dri)2.521
F -.1(ve)-.1 G -1(r.).1 G F0 -1.1(Yo)6.021 G 2.52(us)1.1 G .02
(hould note that)-2.52 F F2 -.18(re)2.52 G(adcd).18 E F0 .02
(uses a hack,)2.52 F .784
(that tries to emulate the functionality of the scg dri)108 309.6 R -.15
(ve)-.25 G 4.385 -.55(r. U).15 H(nfortunately).55 E 3.285(,t)-.65 G .785
(he sg dri)-3.285 F -.15(ve)-.25 G 3.285(ro).15 G(n)-3.285 E F2(Linux)
3.285 E F0 .785(has se)3.285 F -.15(ve)-.25 G(ral).15 E(se)108 321.6 Q
-.15(ve)-.25 G(re b).15 E(ugs:)-.2 E 32.5<8349>108 338.4 S 2.5(tc)-32.5
G(annot see if a SCSI command could not be sent at all.)-2.5 E 32.5
<8349>108 355.2 S 3.113(tc)-32.5 G .613(annot get the SCSI status byte.)
-3.113 F F2(Readcd)5.613 E F0 .612(for that reason cannot report f)3.113
F .612(ailing SCSI commands)-.1 F(in some situations.)144 367.2 Q 32.5
<8349>108 384 S 3.722(tc)-32.5 G 1.223
(annot get real DMA count of transfer)-3.722 F(.)-.55 E F2(Readcd)6.223
E F0 1.223(cannot tell you if there is an DMA residual)3.723 F(count.)
144 396 Q 32.5<8349>108 412.8 S 2.936(tc)-32.5 G .436
(annot get number of bytes v)-2.936 F .435(alid in auto sense data.)-.25
F F2(Readcd)5.435 E F0 .435(cannot tell you if de)2.935 F .435
(vice transfers)-.25 F(no sense data at all.)144 424.8 Q 32.5<8349>108
441.6 S 2.5(tf)-32.5 G(etches to fe)-2.5 E 2.5(wd)-.25 G
(ata in auto request sense \(CCS/SCSI-2/SCSI-3 needs >= 18\).)-2.5 E F1
(DIA)72 470.4 Q(GNOSTICS)-.602 E F0 2.5(At)108 482.4 S
(ypical error message for a SCSI command looks lik)-2.5 E(e:)-.1 E
(readcd: I/O error)144 506.4 Q 2.5(.t)-.55 G
(est unit ready: scsi sendcmd: no error)-2.5 E 2.5(CDB: 00)144 518.4 R
(20 00 00 00 00)2.5 E(status: 0x2 \(CHECK CONDITION\))144 530.4 Q
(Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 25 00 00 00 00 00)144
542.4 Q(Sense K)144 554.4 Q -.15(ey)-.25 G 2.5(:0).15 G(x5 Ille)-2.5 E
-.05(ga)-.15 G 2.5(lR).05 G(equest, Se)-2.5 E(gment 0)-.15 E
(Sense Code: 0x25 Qual 0x00 \(logical unit not supported\) Fru 0x0)144
566.4 Q(Sense \215ags: Blk 0 \(not v)144 578.4 Q(alid\))-.25 E
(cmd \214nished after 0.002s timeout 40s)144 590.4 Q .351
(The \214rst line gi)108 614.4 R -.15(ve)-.25 G 2.851(si).15 G .352
(nformation about the transport of the command.)-2.851 F .352(The te)
5.352 F .352(xt after the \214rst colon gi)-.15 F -.15(ve)-.25 G 2.852
(st).15 G(he)-2.852 E .041(error te)108 626.4 R .041
(xt for the system call from the vie)-.15 F 2.541(wo)-.25 G 2.541(ft)
-2.541 G .04(he k)-2.541 F .04(ernel. It usually is:)-.1 F F2 .04
(I/O err)2.54 F(or)-.18 E F0 .04(unless other problems hap-)2.54 F .579
(pen. The ne)108 638.4 R .579(xt w)-.15 F .579
(ords contain a short description for the SCSI command that f)-.1 F .58
(ails. The rest of the line tells)-.1 F .051(you if there were an)108
650.4 R 2.551(yp)-.15 G .051(roblems for the transport of the command o)
-2.551 F -.15(ve)-.15 G 2.551(rt).15 G .051(he SCSI b)-2.551 F(us.)-.2 E
F2 .051(fatal err)5.051 F(or)-.18 E F0 .051(means that)2.551 F(it w)108
662.4 Q(as not possible to transport the command \(i.e. no de)-.1 E
(vice present at the requested SCSI address\).)-.25 E
(The second line prints the SCSI command descriptor block for the f)108
679.2 Q(ailed command.)-.1 E .706(The third line gi)108 696 R -.15(ve)
-.25 G 3.206(si).15 G .707(nformation on the SCSI status code returned \
by the command, if the transport of the)-3.206 F(command succeeds.)108
708 Q(This is error information from the SCSI de)5 E(vice.)-.25 E
(The fourth line is a he)108 724.8 Q 2.5(xd)-.15 G
(ump of the auto request sense information for the command.)-2.5 E(J)72
768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)-.18 G 153.065(chilling V)-2.5
F(ersion 2.0)-1.11 E(4)206.225 E EP
%%Page: 5 5
%%BeginPageSetup
BP
%%EndPageSetup
/F0 10/Times-Roman@0 SF 117.615(READCD\(1\) Schily\264s)72 48 R
(USER COMMANDS)2.5 E(READCD\(1\))120.115 E .846
(The \214fth line is the error te)108 84 R .846(xt for the sense k)-.15
F 1.146 -.15(ey i)-.1 H 3.346(fa).15 G -.25(va)-3.546 G .846
(ilable, follo).25 F .846(wed by the se)-.25 F .846
(gment number that is only)-.15 F -.25(va)108 96 S .421
(lid if the command w).25 F .421(as a)-.1 F/F1 10/Times-Italic@0 SF
(copy)2.921 E F0 .421(command. If the error message is not directly rel\
ated to the current com-)2.921 F(mand, the te)108 108 Q(xt)-.15 E F1
(deferr)2.5 E(ed err)-.37 E(or)-.45 E F0(is appended.)2.5 E 1.279
(The sixth line is the error te)108 124.8 R 1.279
(xt for the sense code and the sense quali\214er if a)-.15 F -.25(va)-.2
G 3.778(ilable. If).25 F 1.278(the type of the)3.778 F(de)108 136.8 Q
.012(vice is kno)-.25 F .012
(wn, the sense data is decoded from tables in)-.25 F F1(scsierr)2.512 E
(s.c)-.1 E F0 5.012(.T)2.822 G .012(he te)-5.012 F .012(xt is follo)-.15
F .012(wed by the error v)-.25 F(alue)-.25 E
(for a \214eld replaceable unit.)108 148.8 Q 1.069(The se)108 165.6 R
-.15(ve)-.25 G 1.069
(nth line prints the block number that is related to the f).15 F 1.069
(ailed command and te)-.1 F 1.069(xt for se)-.15 F -.15(ve)-.25 G 1.068
(ral error).15 F(\215ags. The block number may not be v)108 177.6 Q
(alid.)-.25 E .356(The eight line reports the timeout set up for this c\
ommand and the time that the command really needed to)108 194.4 R
(complete.)108 206.4 Q/F2 10.95/Times-Bold@0 SF -.11(BU)72 235.2 S(GS)
.11 E(CREDITS)72 247.2 Q(MAILING LISTS)72 259.2 Q F0 .103(If you w)108
271.2 R .102(ant to acti)-.1 F -.15(ve)-.25 G .102(ly tak).15 F 2.602
(ep)-.1 G .102(art on the de)-2.602 F -.15(ve)-.25 G .102
(lopment of cdrecord, you may join the cdwriting mailing list by).15 F
(sending mail to:)108 283.2 Q(other)144 307.2 Q
(-cdwrite-request@lists.debian.or)-.2 E(g)-.18 E(and include the w)108
331.2 Q(ord)-.1 E F1(subscribe)2.5 E F0(in the body)2.5 E 5(.T)-.65 G
(he mail address of the list is:)-5 E(cdwrite@lists.debian.or)144 355.2
Q(g)-.18 E F2 -.548(AU)72 384 S(THOR).548 E F0(J)108 396 Q -.25(..)-5.5
K(or)-4.5 5.5 M 2.5(gS)-.18 G(chilling)-2.5 E(Seestr)108 408 Q 2.5(.1)
-.55 G(10)-2.5 E(D-13353 Berlin)108 420 Q(German)108 432 Q(y)-.15 E
(Additional information can be found on:)108 448.8 Q(http://www)108
460.8 Q(.fokus.fhg.de/usr/schilling/cdrecord.html)-.65 E(If you ha)108
477.6 Q .3 -.15(ve s)-.2 H(upport questions, send them to:).15 E/F3 10
/Times-Bold@0 SF(cdr)108 494.4 Q(ecord-support@berlios.de)-.18 E F0(or)
108 506.4 Q F3(other)2.5 E(-cd)-.37 E(write@lists.debian.or)-.15 E(g)-.1
E F0(Of you ha)108 523.2 Q .3 -.15(ve d)-.2 H(e\214nitely found a b).15
E(ug, send a mail to:)-.2 E F3(cdr)108 540 Q(ecord-de)-.18 E -.1(ve)-.15
G(lopers@berlios.de).1 E F0(or)108 552 Q F3(schilling@f)2.5 E(okus.fhg)
-.25 E(.de)-.15 E F0 1.6 -.8(To s)108 568.8 T(ubscribe, use:).8 E F3
(http://lists.berlios.de/mailman/listinf)108 585.6 Q(o/cdr)-.25 E
(ecord-de)-.18 E -.1(ve)-.15 G(lopers).1 E F0(or)108 597.6 Q F3
(http://lists.berlios.de/mailman/listinf)2.5 E(o/cdr)-.25 E
(ecord-support)-.18 E F0(J)72 768 Q -.25(..)-5.5 K(or)-4.5 5.5 M 2.5(gS)
-.18 G 153.065(chilling V)-2.5 F(ersion 2.0)-1.11 E(5)206.225 E EP
%%Trailer
end
%%EOF