### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep
### update-modules: end processing /etc/modutils/0keep
### update-modules: start processing /etc/modutils/1devfsd
# /etc/modules.devfs
# Richard Gooch <rgooch@atnf.csiro.au> 24-MAR-2002
#
# THIS IS AN AUTOMATICALLY GENERATED FILE. DO NOT EDIT!!!
# THIS FILE WILL BE OVERWRITTEN EACH TIME YOU INSTALL DEVFSD!!!
# Modify /etc/modules.conf instead.
# This file comes with devfsd-vDEVFSD-VERSION which is available from:
# http://www.atnf.csiro.au/~rgooch/linux/
# or directly from:
# ftp://ftp.atnf.csiro.au/pub/people/rgooch/linux/daemons/devfsd-vDEVFSD-VERSION.tar.gz
###############################################################################
# Sample configurations that you may want to place in /etc/modules.conf
#
#alias sound-slot-0 sb
#alias /dev/v4l bttv
#alias /dev/misc/watchdog pcwd
#alias gen-md raid0
#alias /dev/joysticks joystick
#probeall scsi_hostadapter sym53c8xx
###############################################################################
# Generic section: do not change or copy
#
# All HDDs
probeall /dev/discs scsi_hostadapter sd_mod ide-probe-mod ide-disk ide-floppy DAC960
alias /dev/discs/* /dev/discs
# All CD-ROMs
probeall /dev/cdroms scsi_hostadapter sr_mod ide-probe-mod ide-cd cdrom
alias /dev/cdroms/* /dev/cdroms
alias /dev/cdrom /dev/cdroms
# All tapes
probeall /dev/tapes scsi_hostadapter st ide-probe-mod ide-tape
alias /dev/tapes/* /dev/tapes
# All SCSI devices
probeall /dev/scsi scsi_hostadapter sd_mod sr_mod st sg
# All IDE devices
alias /dev/hd* /dev/ide
alias /dev/ide/host*/bus*/target*/lun*/* /dev/ide
probeall /dev/ide ide-probe-mod ide-disk ide-cd ide-tape ide-floppy
# IDE CD-ROMs
alias /dev/ide/*/cd ide-cd
# SCSI HDDs
probeall /dev/sd scsi_hostadapter sd_mod
alias /dev/sd* /dev/sd
# SCSI CD-ROMs
probeall /dev/sr scsi_hostadapter sr_mod
alias /dev/sr* /dev/sr
alias /dev/scsi/*/cd sr_mod
# SCSI tapes
probeall /dev/st scsi_hostadapter st
alias /dev/st* /dev/st
alias /dev/nst* /dev/st
# SCSI generic
probeall /dev/sg scsi_hostadapter sg
alias /dev/sg* /dev/sg
alias /dev/scsi/*/generic /dev/sg
alias /dev/pg /dev/sg
alias /dev/pg* /dev/sg
# Floppies
alias /dev/floppy floppy
alias /dev/fd* floppy
# RAMDISCs
alias /dev/rd rd
alias /dev/ram* rd
# Loop devices
alias /dev/loop* loop
# Meta devices
alias /dev/md* gen-md
# Parallel port printers
alias /dev/printers* lp
alias /dev/lp* /dev/printers
# Soundcard
alias /dev/sound sound-slot-0
alias /dev/audio /dev/sound
alias /dev/mixer /dev/sound
alias /dev/dsp /dev/sound
alias /dev/dspW /dev/sound
alias /dev/midi /dev/sound
# Joysticks
alias /dev/js* /dev/joysticks
# Serial ports
alias /dev/tts* serial
alias /dev/ttyS* /dev/tts
alias /dev/cua* /dev/tts
# Input devices
alias /dev/input/mouse* mousedev
# Miscellaneous devices
alias /dev/misc/atibm atixlmouse
alias /dev/misc/inportbm msbusmouse
alias /dev/misc/logibm busmouse
alias /dev/misc/rtc rtc
alias /dev/misc/agpgart agpgart
alias /dev/rtc /dev/misc/rtc
# PPP devices
alias /dev/ppp* ppp_generic
# Video capture devices
alias /dev/video* /dev/v4l
alias /dev/vbi* /dev/v4l
# agpgart
alias /dev/agpgart agpgart
alias /dev/dri* agpgart
# Irda devices
alias /dev/ircomm ircomm-tty
alias /dev/ircomm* /dev/ircomm
# Raw I/O devices
alias /dev/rawctl /dev/raw
# Pull in the configuration file. Do this last because modprobe(8) processes in
# per^H^H^Hreverse order and the sysadmin may want to over-ride what is in the
# generic file
#include /etc/modules.conf
### update-modules: end processing /etc/modutils/1devfsd
### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules
# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner
### update-modules: end processing /etc/modutils/actions
### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
alias char-major-195 NVdriver
### update-modules: end processing /etc/modutils/aliases
### update-modules: start processing /etc/modutils/alsa-path
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
path=/lib/modules/`uname -r`/alsa
### update-modules: end processing /etc/modutils/alsa-path
### update-modules: start processing /etc/modutils/apm
alias char-major-10-134 apm
alias /dev/apm_bios /dev/misc/apm_bios
alias /dev/misc/apm_bios apm
### update-modules: end processing /etc/modutils/apm
### update-modules: start processing /etc/modutils/cdrw
options ide-cd ignore=hdc # tell the ide-cd module to ignore hdb
alias scd0 sr_mod # load sr_mod upon access of scd0
#pre-install ide-scsi modprobe imm # uncomment for some ZIP drives only
pre-install sg modprobe ide-scsi # load ide-scsi before sg
pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod
pre-install ide-scsi modprobe ide-cd # load ide-cd before ide-scsi
### update-modules: end processing /etc/modutils/cdrw
### update-modules: start processing /etc/modutils/irda
alias tty-ldisc-11 irtty
alias char-major-161 ircomm-tty
alias char-major-60 ircomm_tty
# for dongle
alias irda-dongle-0 tekram
alias irda-dongle-1 esi
alias irda-dongle-2 actisys
alias irda-dongle-3 actisys
alias irda-dongle-4 girbil
alias irda-dongle-5 litelink
alias irda-dongle-6 airport
alias irda-dongle-7 old_belkin
# for FIR device
alias irda0 smc-ircc
#dongle_id=0x09
pre-install smc-ircc /usr/local/sbin/tosh5100-smcinit
### update-modules: end processing /etc/modutils/irda
### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.
### update-modules: end processing /etc/modutils/paths
### update-modules: start processing /etc/modutils/pcmcia
pre-install ide-cs /etc/init.d/irda stop
post-remove ide-cs /etc/init.d/irda start
### update-modules: end processing /etc/modutils/pcmcia
### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
### update-modules: end processing /etc/modutils/ppp
### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts serial
alias /dev/tts/0 serial
alias /dev/tts/1 serial
alias /dev/tts/2 serial
alias /dev/tts/3 serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null
### update-modules: end processing /etc/modutils/setserial
### update-modules: start processing /etc/modutils/sound
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-card-0
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias sound-service-1-0 off
alias sound-slot-1 off
#gentoo suggestion
alias /dev/dsp snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/midi snd-seq-oss
### update-modules: end processing /etc/modutils/sound
### update-modules: start processing /etc/modutils/toshutils
alias char-major-10-181 toshiba
options toshiba tosh_fn=0x62
### update-modules: end processing /etc/modutils/toshutils
### update-modules: start processing /etc/modutils/usb
options usb-uhci debug 3
post-install belkin_sa /usr/local/sbin/belkin-usb-serial
### update-modules: end processing /etc/modutils/usb
### update-modules: start processing /etc/modutils/arch/i386
#alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
alias parport_lowlevel off
alias char-major-6 off
### update-modules: end processing /etc/modutils/arch/i386