# Copyright (c) 2014-2016 Carbonite, Inc. All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# Contact information: Carbonite Inc., 756 N Pastoria Ave
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
use Test::More;
use File::Path;
use strict;
use warnings;
use lib '@amperldir@';
use Installcheck;
use Installcheck::Dumpcache;
use Installcheck::Config;
use Installcheck::Run qw(run run_err $diskname amdump_diag check_amreport check_amstatus);
use Installcheck::Catalogs;
use Amanda::Paths;
use Amanda::Device qw( :constants );
use Amanda::Debug;
use Amanda::MainLoop;
use Amanda::Config qw( :init :getconf config_dir_relative );
use Amanda::Changer;
use Amanda::Constants;
use Cwd qw (getcwd);
eval 'use Installcheck::Rest;';
if ($@) {
plan skip_all => "Can't load Installcheck::Rest: $@";
exit 1;
}
eval "require Time::HiRes;";
# set up debugging so debug output doesn't interfere with test results
Amanda::Debug::dbopen("installcheck");
Installcheck::log_test_output();
# and disable Debug's die() and warn() overrides
Amanda::Debug::disable_die_override();
my $rest = Installcheck::Rest->new();
if ($rest->{'error'}) {
plan skip_all => "Can't start JSON Rest server: $rest->{'error'}: see " . Amanda::Debug::dbfn();
exit 1;
}
plan tests => 40;
my $reply;
my $config_dir = $Amanda::Paths::CONFIG_DIR;
my $amperldir = $Amanda::Paths::amperldir;
my $testconf;
my $diskfile;
my $infodir;
my $timestamp;
my $tracefile;
my $logfile;
my $hostname = `hostname`;
chomp $hostname;
$testconf = Installcheck::Run::setup();
$testconf->add_param('autolabel', '"TESTCONF%%" empty volume_error');
$testconf->add_param('columnspec', '"Dumprate=1:-8:1,TapeRate=1:-8:1"');
my $cwd = getcwd();
$testconf->add_dle(<<EODLE);
localhost diskname2 $diskname {
installcheck-test
program "APPLICATION"
application {
plugin "amrandom"
property "SIZE" "1075200"
}
compress server custom
server-custom-compress "$cwd/amcat-error-not-found"
}
EODLE
$testconf->write();
config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
$diskfile = Amanda::Config::config_dir_relative(getconf($CNF_DISKFILE));
$infodir = getconf($CNF_INFOFILE);
my $post_data = '';
if ($Amanda::Constants::FAILURE_CODE) {
if (rand(2) > 1) {
$post_data = '{"FAILURE":{"DISABLE_NETWORK_SHM":"1"}}';
}
}
$reply = $rest->post("http://localhost:5001/amanda/v1.0/configs/TESTCONF/runs/amdump", $post_data);
foreach my $message (@{$reply->{'body'}}) {
if (defined $message and defined $message->{'code'}) {
if ($message->{'code'} == 2000003) {
$timestamp = $message->{'timestamp'};
}
if ($message->{'code'} == 2000001) {
$tracefile = $message->{'tracefile'};
}
if ($message->{'code'} == 2000000) {
$logfile = $message->{'logfile'};
}
}
}
#wait until it is done
do {
Time::HiRes::sleep(0.5);
$reply = $rest->get("http://localhost:5001/amanda/v1.0/configs/TESTCONF/runs");
} while ($reply->{'body'}[0]->{'code'} == 2000004 and
$reply->{'body'}[0]->{'status'} ne 'done');
# get REST report
$reply = $rest->get("http://localhost:5001/amanda/v1.0/configs/TESTCONF/report?logfile=$logfile");
is($reply->{'body'}->[0]->{'severity'}, 'success', 'severity is success');
is($reply->{'body'}->[0]->{'code'}, '1900001', 'code is 1900001');
is($reply->{'body'}->[0]->{'report'}->{'head'}->{'hostname'}, $hostname , 'hostname is correct');
is($reply->{'body'}->[0]->{'report'}->{'head'}->{'exit_status'}, '4' , 'exit_status is correct');
is($reply->{'body'}->[0]->{'report'}->{'head'}->{'status'}, 'done' , 'status is correct');
is($reply->{'body'}->[0]->{'report'}->{'head'}->{'org'}, 'DailySet1' , 'org is correct');
is($reply->{'body'}->[0]->{'report'}->{'head'}->{'config_name'}, 'TESTCONF' , 'config_name is correct');
is($reply->{'body'}->[0]->{'report'}->{'head'}->{'timestamp'}, $timestamp , 'timestamp is correct');
is($reply->{'body'}->[0]->{'report'}->{'notes'}->[1], ' planner: Adding new disk localhost:diskname2.' , 'notes[1] is correct');
is($reply->{'body'}->[0]->{'report'}->{'notes'}->[2], ' taper: Slot 1 without label can be labeled' , 'notes[2] is correct');
ok(!exists $reply->{'body'}->[0]->{'report'}->{'notes'}->[3], 'no notes[3]');
is_deeply($reply->{'body'}->[0]->{'report'}->{'failure_summary'}, [
" localhost diskname2 lev 0 FAILED [write to compression program failed: Broken pipe]",
" localhost diskname2 lev 0 FAILED [dumper returned FAILED]",
" localhost diskname2 lev 0 FAILED [write to compression program failed: Broken pipe]",
" localhost diskname2 lev 0 FAILED [dumper returned FAILED]",
], "failure_summary is correct");
ok(!exists $reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[0], 'no tape');
is_deeply($reply->{'body'}->[0]->{'report'}->{'tapeinfo'}, {
'storage' => { 'TESTCONF' => { 'new' => 1,
'next_to_use' => 1
}
}
}, 'tapeinfo is correct') || diag("tapeinfo: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'tapeinfo'}));
is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'tape_size'}, { 'full' => '0',
'total' => '0',
'incr' => '0' }, 'tape_size is correct');
is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'parts_taped'}, { 'full' => '0',
'total' => '0',
'incr' => '0' }, 'parts_taped is correct');
is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'dles_taped'}, { 'full' => '0',
'total' => '0',
'incr' => '0' }, 'dles_taped is correct');
is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'dles_dumped'}, { 'full' => '0',
'total' => '0',
'incr' => '0' }, 'dles_dumped is correct');
is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'original_size'}, { 'full' => '0',
'total' => '0',
'incr' => '0' }, 'original_size is correct');
is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'output_size'}, { 'full' => '0',
'total' => '0',
'incr' => '0' }, 'output_size is correct');
is($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'dumpdisks'}, '', 'dumpdisks is correct');
is($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'tapedisks'}, '', 'tapedisks is correct');
is($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'tapeparts'}, '', 'tapeparts is correct');
is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'backup_level'}, '0', 'backup_level is correct');
is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'disk_name'}, 'diskname2', 'disk_name is correct');
is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'hostname'}, 'localhost', 'hostname is correct');
is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'dump_orig_kb'}, '', 'dump_orig_kb is correct');
is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'dump_out_kb'}, '', 'dump_out_kb is correct');
is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'dle_status'}, 'nodump-PARTIAL', 'dle_status is correct');
ok(!exists $reply->{'body'}->[0]->{'report'}->{'summary'}->[1], 'Only one summary');
$reply = $rest->get("http://localhost:5001/amanda/v1.0/configs/TESTCONF/status?tracefile=$tracefile");
is($reply->{'body'}->[0]->{'severity'}, 'info', 'severity is info');
is($reply->{'body'}->[0]->{'code'}, '1800000', 'code is 1800000');
is($reply->{'body'}->[0]->{'status'}->{'dead_run'}, '1', 'dead_run is correct');
is($reply->{'body'}->[0]->{'status'}->{'exit_status'}, '4', 'exit_status is correct');
$reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{'diskname2'}->{$timestamp}->{'chunk_time'} = undef;
$reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{'diskname2'}->{$timestamp}->{'dump_time'} = undef;
is_deeply($reply->{'body'}->[0]->{'status'}->{'dles'},
{
'localhost' => {
'diskname2' => {
$timestamp => {
'retry' => '0',
'size' => '0',
'esize' => '537600',
'retry_level' => '-1',
'message' => "dump failed: [write to compression program failed: Broken pipe]",
'chunk_time' => undef,
'dsize' => '0',
'status' => '12',
'level' => '0',
'dump_time' => undef,
'error' => "[write to compression program failed: Broken pipe]",
'holding_file' => "$Installcheck::TMP/holding/$timestamp/localhost.diskname2.0",
'degr_level' => '-1',
'flush' => '0',
'will_retry' => '0'
}
}
}
},
'dles is correct') || diag("dles: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'status'}->{'dles'}));
is_deeply($reply->{'body'}->[0]->{'status'}->{'taper'},
{
'taper0' => {
'worker' => {
'worker0-0' => {
'status' => '0',
}
},
'tape_size' => '31457280',
'storage' => 'TESTCONF',
'nb_tape' => '0',
}
},
'taper is correct') ||diag('status taper'. Data::Dumper::Dumper($reply->{'body'}->[0]->{'status'}->{'taper'}));
is($reply->{'body'}->[0]->{'status'}->{'storage'}->{'TESTCONF'}->{'taper'}, 'taper0', 'taper is correct');
is_deeply($reply->{'body'}->[0]->{'status'}->{'stat'},
{
'flush' => {
'name' => 'flush'
},
'writing_to_tape' => {
'name' => 'writing to tape'
},
'wait_for_dumping' => {
'name' => 'wait for dumping',
'real_size' => undef,
'estimated_stat' => '0',
'nb' => '0',
'estimated_size' => '0'
},
'failed_to_tape' => {
'name' => 'failed to tape'
},
'dumping_to_tape' => {
'name' => 'dumping to tape',
'estimated_stat' => '0',
'real_size' => '0',
'real_stat' => '0',
'estimated_size' => '0',
'nb' => '0'
},
'wait_for_writing' => {
'name' => 'wait for writing'
},
'wait_to_flush' => {
'name' => 'wait_to_flush'
},
'dump_failed' => {
'name' => 'dump failed',
'estimated_stat' => '0',
'real_size' => undef,
'nb' => '1',
'estimated_size' => '537600'
},
'estimated' => {
'name' => 'estimated',
'real_size' => undef,
'estimated_size' => '537600',
'nb' => '1'
},
'taped' => {
'name' => 'taped',
},
'dumped' => {
'name' => 'dumped',
'estimated_stat' => '0',
'real_size' => '0',
'nb' => '0',
'real_stat' => '0',
'estimated_size' => '0'
},
'disk' => {
'name' => 'disk',
'nb' => '1',
'estimated_size' => undef,
'real_size' => undef
},
'dumping' => {
'name' => 'dumping',
'nb' => '0',
'real_stat' => '0',
'estimated_size' => '0',
'real_size' => '0',
'estimated_stat' => '0'
}
},
'stat is correct') || diag("stat: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'status'}->{'stat'}));
# amreport
#
my $report = <<"END_REPORT";
Hostname: localhost.localdomain
Org : DailySet1
Config : TESTCONF
Date : June 22, 2016
The next tape Amanda expects to use is: 1 new tape.
FAILURE DUMP SUMMARY:
localhost diskname2 lev 0 FAILED [write to compression program failed: Broken pipe]
localhost diskname2 lev 0 FAILED [dumper returned FAILED]
localhost diskname2 lev 0 FAILED [write to compression program failed: Broken pipe]
localhost diskname2 lev 0 FAILED [dumper returned FAILED]
STATISTICS:
Total Full Incr. Level:#
-------- -------- -------- --------
Estimate Time (hrs:min) 0:00
Run Time (hrs:min) 0:00
Dump Time (hrs:min) 0:00 0:00 0:00
Output Size (meg) 0.0 0.0 0.0
Original Size (meg) 0.0 0.0 0.0
Avg Compressed Size (%) -- -- --
DLEs Dumped 0 0 0
Avg Dump Rate (k/s) -- -- --
Tape Time (hrs:min) 0:00 0:00 0:00
Tape Size (meg) 0.0 0.0 0.0
Tape Used (%) 0.0 0.0 0.0
DLEs Taped 0 0 0
Parts Taped 0 0 0
Avg Tp Write Rate (k/s) -- -- --
FAILED DUMP DETAILS:
/-- localhost diskname2 lev 0 FAILED [write to compression program failed: Broken pipe]
sendbackup: info BACKUP=APPLICATION
sendbackup: info APPLICATION=amrandom
sendbackup: info RECOVER_CMD=$Amanda::Paths::APPLICATION_DIR/amrandom restore [./file-to-restore]+
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
? data compress: error: couldn't exec server custom compression '$cwd/amcat-error-not-found': No such file or directory.
? data compress: exited with status 1
\\--------
/-- localhost diskname2 lev 0 FAILED [write to compression program failed: Broken pipe]
sendbackup: info BACKUP=APPLICATION
sendbackup: info APPLICATION=amrandom
sendbackup: info RECOVER_CMD=$Amanda::Paths::APPLICATION_DIR/amrandom restore [./file-to-restore]+
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
? data compress: error: couldn't exec server custom compression '$cwd/amcat-error-not-found': No such file or directory.
? data compress: exited with status 1
\\--------
NOTES:
planner: tapecycle (2) <= runspercycle (10)
planner: Adding new disk localhost:diskname2.
taper: Slot 1 without label can be labeled
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-------------------------- ---------------------- ---------------- ---------------
localhost diskname2 0 -- PARTIAL
(brought to you by Amanda version 4.0.0alpha.git.00388ecf)
END_REPORT
check_amreport($report, $timestamp, "amreport first amdump", undef, 1);
# amstatus
my $status = <<"END_STATUS";
Using: /amanda/h1/etc/amanda/TESTCONF/log/amdump.1
From Wed Jun 22 08:22:28 EDT 2016
localhost:diskname2 $timestamp 0 0k dump failed: [write to compression program failed: Broken pipe] (00:00:00)
SUMMARY dle real estimated
size size
---------------- ---- --------- ---------
disk : 1
estimated : 1 525k
flush
dump failed : 1 525k ( 0.00%)
wait for dumping: 0 0k ( 0.00%)
dumping to tape : 0 0k 0k ( 0.00%) ( 0.00%)
dumping : 0 0k 0k ( 0.00%) ( 0.00%)
dumped : 0 0k 0k (100.00%) (100.00%)
wait for writing
wait to flush
writing to tape
dumping to tape
failed to tape
taped
2 dumpers idle : no-dumpers
TESTCONF qlen: 0
0:
network free kps: 80000
holding space : 24k (100.00%)
chunker0 busy : 00:00:00 ( 83.54%)
dumper0 busy : 00:00:00 ( 5.99%)
0 dumpers busy : 00:00:00 ( 99.56%)
1 dumper busy : 00:00:00 ( 0.44%)
END_STATUS
check_amstatus($status, $tracefile, "amstatus first amdump");
#diag("reply: " . Data::Dumper::Dumper($reply));
#$rest->stop();
#exit;
$rest->stop();
Installcheck::Run::cleanup();