# Copyright (c) 2009-2012 Zmanda, Inc. All Rights Reserved.
# Copyright (c) 2013-2016 Carbonite, Inc. All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# Contact information: Carbonite Inc., 756 N Pastoria Ave
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
use Test::More tests => 42;
use strict;
use warnings;
use lib '@amperldir@';
use Installcheck::Config;
use Installcheck::Run qw(run run_err run_get load_vtape vtape_dir);
use Amanda::Device qw( :constants );
use Amanda::Config qw( :init :getconf );
use Amanda::Paths;
use Amanda::Debug;
use Amanda::Tapelist;
use Amanda::Changer;
use Amanda::MainLoop;
my $testconf;
Amanda::Debug::dbopen("installcheck");
Installcheck::log_test_output();
$testconf = Installcheck::Run::setup();
$testconf->write();
config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
my ($cfgerr_level, @cfgerr_errors) = config_errors();
if ($cfgerr_level >= $CFGERR_WARNINGS) {
config_print_errors();
BAIL_OUT("config errors");
}
# label slot 2 with "MyTape", slot 3 with "TESTCONF13", and add
# the latter to the tapelist
sub setup_vtapes {
my ($chg, $dev);
$chg = Amanda::Changer->new();
$chg->load(slot => 2,
res_cb => sub {
my ($err, $reservation) = @_;
if ($err) {
BAIL_OUT("device error 1");
}
$dev = $reservation->{'device'};
($dev && ($dev->status == $DEVICE_STATUS_SUCCESS ||
$dev->status == $DEVICE_STATUS_VOLUME_UNLABELED))
or BAIL_OUT("device error 2");
$dev->start($ACCESS_WRITE, "MyTape", undef)
or BAIL_OUT("device error 3");
$dev->finish()
or BAIL_OUT("device error 4");
$reservation->release(
finished_cb => sub {
$chg->load(slot => 3,
res_cb => sub {
my ($err, $reservation) = @_;
if ($err) {
BAIL_OUT("device error 5");
}
$dev = $reservation->{'device'};
($dev && ($dev->status == $DEVICE_STATUS_SUCCESS ||
$dev->status == $DEVICE_STATUS_VOLUME_UNLABELED))
or BAIL_OUT("device error 6");
$dev->start($ACCESS_WRITE, "TESTCONF13", undef)
or BAIL_OUT("device error 7");
$dev->finish()
or BAIL_OUT("device error 8");
$reservation->release(finished_cb => sub {
Amanda::MainLoop::quit();
});
});
});
});
Amanda::MainLoop::run();
$chg->quit();
my $tlf = Amanda::Config::config_dir_relative(getconf($CNF_TAPELIST));
my ($tl, $message) = Amanda::Tapelist->new($tlf, 1);
$tl->add_tapelabel("0", "TESTCONF13", "test tape");
$tl->write($tlf);
}
like(run_err('amtape'),
qr/^Usage:/,
"bare 'amtape' gives usage message");
# in general, output goes to stderr, so we can't use run_get. These checks
# accomplish two things: ensure that amtape can invoke the changer functions
# correctly (and not generate an error), and ensure that it gives the
# appropriate responses. It does not exercise the changer itself -- most
# of these operations are meaningless for vtapes, anyway.
setup_vtapes();
ok(run('amtape', 'TESTCONF', 'reset'),
"'amtape TESTCONF reset'");
like($Installcheck::Run::stderr,
qr/changer is reset/,
"..result correct");
# TODO: chg-disk doesn't support "eject"
#ok(run('amtape', 'TESTCONF', 'eject'),
# "'amtape TESTCONF eject'");
#like($Installcheck::Run::stderr,
# qr/drive ejected/,
# "..result correct");
# TODO: chg-disk doesn't support "clean"
ok(run('amtape', 'TESTCONF', 'slot', '2'),
"'amtape TESTCONF slot 2'");
like($Installcheck::Run::stderr,
qr/changed to slot 2/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'slot', 'current'),
"'amtape TESTCONF slot current'");
like($Installcheck::Run::stderr,
qr/changed to slot 2/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'slot', 'next'),
"'amtape TESTCONF slot next'");
like($Installcheck::Run::stderr,
qr/changed to slot 3/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'slot', 'next'),
"'amtape TESTCONF slot next'");
like($Installcheck::Run::stderr,
qr/changed to slot 1/, # loop around to slot 1
"..result correct");
ok(run('amtape', 'TESTCONF', 'label', 'MyTape'),
"'amtape TESTCONF label MyTape'");
like($Installcheck::Run::stderr,
qr/slot +2:.*label MyTape/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'current'),
"'amtape TESTCONF current'");
like($Installcheck::Run::stderr,
qr/slot +2:.*label MyTape/,
"..result correct");
# TODO: chg-disk doesn't support "update"
#ok(run('amtape', 'TESTCONF', 'update'),
# "'amtape TESTCONF update'");
#like($Installcheck::Run::stderr,
# qr/update complete/,
# "..result correct");
ok(run('amtape', 'TESTCONF', 'show'),
"'amtape TESTCONF show'");
like($Installcheck::Run::stderr,
qr/slot +2:.*label MyTape \(label do not match labelstr\)\nslot +3/,
"'amtape TESTCONF show' ..result correct");
ok(run('amtape', 'TESTCONF', 'show', '2'),
"'amtape TESTCONF show'");
like($Installcheck::Run::stderr,
qr/^slot +2:.*label MyTape \(label do not match labelstr\)$/,
"'amtape TESTCONF show 2' ..result correct");
ok(run('amtape', 'TESTCONF', 'show', '1,3'),
"'amtape TESTCONF show'");
like($Installcheck::Run::stderr,
qr/^slot +1: unlabeled volume\nslot +3: date \d{14} label TESTCONF13$/,
# qr/slot +1: unlabeled volume\nslot +3: date 20111121133419 label TESTCONF13/,
"'amtape TESTCONF show 1,3' ..result correct");
ok(run('amtape', 'TESTCONF', 'taper'),
"'amtape TESTCONF taper'");
like($Installcheck::Run::stderr,
qr/Will write to volume 'TESTCONF13' in slot 3/,
"'amtape TESTCONF taper' ..result correct");
###
## shift to using the new Amanda::Changer::disk
$testconf->remove_param("tapedev");
$testconf->remove_param("tpchanger");
$testconf->add_param("tpchanger", "\"chg-disk:" . vtape_dir(). "\"");
$testconf->write();
setup_vtapes();
ok(run('amtape', 'TESTCONF', 'reset'),
"'amtape TESTCONF reset'");
like($Installcheck::Run::stderr,
qr/changer is reset/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'slot', '2'),
"'amtape TESTCONF slot 2'");
like($Installcheck::Run::stderr,
qr/changed to slot 2/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'slot', 'current'),
"'amtape TESTCONF slot current'");
like($Installcheck::Run::stderr,
qr/changed to slot 2/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'slot', 'next'),
"'amtape TESTCONF slot next'");
like($Installcheck::Run::stderr,
qr/changed to slot 3/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'label', 'MyTape'),
"'amtape TESTCONF label MyTape'");
like($Installcheck::Run::stderr,
qr/label MyTape is now loaded from slot 2/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'current'),
"'amtape TESTCONF current'");
like($Installcheck::Run::stderr,
qr/slot +2:.*label MyTape/,
"..result correct");
like(run_err('amtape', 'TESTCONF', 'update'),
qr/does not support update/,
"'amtape TESTCONF update' fails gracefully");
ok(run('amtape', 'TESTCONF', 'show'),
"'amtape TESTCONF show'");
like($Installcheck::Run::stderr,
qr/slot +2:.*label MyTape \(label do not match labelstr\)\nslot +3/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'inventory'),
"'amtape TESTCONF inventory'");
like($Installcheck::Run::stdout,
qr/slot +1: blank\nslot +2: label MyTape \(current\) \(label do not match labelstr\)\nslot +3/,
"..result correct");
ok(run('amtape', 'TESTCONF', 'taper'),
"'amtape TESTCONF taper'");
like($Installcheck::Run::stderr,
qr/Will write to volume 'TESTCONF13' in slot 3/,
"'amtape TESTCONF taper' ..result correct");
Installcheck::Run::cleanup();