/*******************************************************************************
*
* Module Name: rscalc - Calculate stream and list lengths
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2018, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include "acpi.h"
#include "accommon.h"
#include "acresrc.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME ("rscalc")
/* Local prototypes */
static UINT8
AcpiRsCountSetBits (
UINT16 BitField);
static ACPI_RS_LENGTH
AcpiRsStructOptionLength (
ACPI_RESOURCE_SOURCE *ResourceSource);
static UINT32
AcpiRsStreamOptionLength (
UINT32 ResourceLength,
UINT32 MinimumTotalLength);
/*******************************************************************************
*
* FUNCTION: AcpiRsCountSetBits
*
* PARAMETERS: BitField - Field in which to count bits
*
* RETURN: Number of bits set within the field
*
* DESCRIPTION: Count the number of bits set in a resource field. Used for
* (Short descriptor) interrupt and DMA lists.
*
******************************************************************************/
static UINT8
AcpiRsCountSetBits (
UINT16 BitField)
{
UINT8 BitsSet;
ACPI_FUNCTION_ENTRY ();
for (BitsSet = 0; BitField; BitsSet++)
{
/* Zero the least significant bit that is set */
BitField &= (UINT16) (BitField - 1);
}
return (BitsSet);
}
/*******************************************************************************
*
* FUNCTION: AcpiRsStructOptionLength
*
* PARAMETERS: ResourceSource - Pointer to optional descriptor field
*
* RETURN: Status
*
* DESCRIPTION: Common code to handle optional ResourceSourceIndex and
* ResourceSource fields in some Large descriptors. Used during
* list-to-stream conversion
*
******************************************************************************/
static ACPI_RS_LENGTH
AcpiRsStructOptionLength (
ACPI_RESOURCE_SOURCE *ResourceSource)
{
ACPI_FUNCTION_ENTRY ();
/*
* If the ResourceSource string is valid, return the size of the string
* (StringLength includes the NULL terminator) plus the size of the
* ResourceSourceIndex (1).
*/
if (ResourceSource->StringPtr)
{
return ((ACPI_RS_LENGTH) (ResourceSource->StringLength + 1));
}
return (0);
}
/*******************************************************************************
*
* FUNCTION: AcpiRsStreamOptionLength
*
* PARAMETERS: ResourceLength - Length from the resource header
* MinimumTotalLength - Minimum length of this resource, before
* any optional fields. Includes header size
*
* RETURN: Length of optional string (0 if no string present)
*
* DESCRIPTION: Common code to handle optional ResourceSourceIndex and
* ResourceSource fields in some Large descriptors. Used during
* stream-to-list conversion
*
******************************************************************************/
static UINT32
AcpiRsStreamOptionLength (
UINT32 ResourceLength,
UINT32 MinimumAmlResourceLength)
{
UINT32 StringLength = 0;
ACPI_FUNCTION_ENTRY ();
/*
* The ResourceSourceIndex and ResourceSource are optional elements of
* some Large-type resource descriptors.
*/
/*
* If the length of the actual resource descriptor is greater than the
* ACPI spec-defined minimum length, it means that a ResourceSourceIndex
* exists and is followed by a (required) null terminated string. The
* string length (including the null terminator) is the resource length
* minus the minimum length, minus one byte for the ResourceSourceIndex
* itself.
*/
if (ResourceLength > MinimumAmlResourceLength)
{
/* Compute the length of the optional string */
StringLength = ResourceLength - MinimumAmlResourceLength - 1;
}
/*
* Round the length up to a multiple of the native word in order to
* guarantee that the entire resource descriptor is native word aligned
*/
return ((UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (StringLength));
}
/*******************************************************************************
*
* FUNCTION: AcpiRsGetAmlLength
*
* PARAMETERS: Resource - Pointer to the resource linked list
* ResourceListSize - Size of the resource linked list
* SizeNeeded - Where the required size is returned
*
* RETURN: Status
*
* DESCRIPTION: Takes a linked list of internal resource descriptors and
* calculates the size buffer needed to hold the corresponding
* external resource byte stream.
*
******************************************************************************/
ACPI_STATUS
AcpiRsGetAmlLength (
ACPI_RESOURCE *Resource,
ACPI_SIZE ResourceListSize,
ACPI_SIZE *SizeNeeded)
{
ACPI_SIZE AmlSizeNeeded = 0;
ACPI_RESOURCE *ResourceEnd;
ACPI_RS_LENGTH TotalSize;
ACPI_FUNCTION_TRACE (RsGetAmlLength);
/* Traverse entire list of internal resource descriptors */
ResourceEnd = ACPI_ADD_PTR (ACPI_RESOURCE, Resource, ResourceListSize);
while (Resource < ResourceEnd)
{
/* Validate the descriptor type */
if (Resource->Type > ACPI_RESOURCE_TYPE_MAX)
{
return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
}
/* Sanity check the length. It must not be zero, or we loop forever */
if (!Resource->Length)
{
return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
}
/* Get the base size of the (external stream) resource descriptor */
TotalSize = AcpiGbl_AmlResourceSizes [Resource->Type];
/*
* Augment the base size for descriptors with optional and/or
* variable-length fields
*/
switch (Resource->Type)
{
case ACPI_RESOURCE_TYPE_IRQ:
/* Length can be 3 or 2 */
if (Resource->Data.Irq.DescriptorLength == 2)
{
TotalSize--;
}
break;
case ACPI_RESOURCE_TYPE_START_DEPENDENT:
/* Length can be 1 or 0 */
if (Resource->Data.Irq.DescriptorLength == 0)
{
TotalSize--;
}
break;
case ACPI_RESOURCE_TYPE_VENDOR:
/*
* Vendor Defined Resource:
* For a Vendor Specific resource, if the Length is between 1 and 7
* it will be created as a Small Resource data type, otherwise it
* is a Large Resource data type.
*/
if (Resource->Data.Vendor.ByteLength > 7)
{
/* Base size of a Large resource descriptor */
TotalSize = sizeof (AML_RESOURCE_LARGE_HEADER);
}
/* Add the size of the vendor-specific data */
TotalSize = (ACPI_RS_LENGTH)
(TotalSize + Resource->Data.Vendor.ByteLength);
break;
case ACPI_RESOURCE_TYPE_END_TAG:
/*
* End Tag:
* We are done -- return the accumulated total size.
*/
*SizeNeeded = AmlSizeNeeded + TotalSize;
/* Normal exit */
return_ACPI_STATUS (AE_OK);
case ACPI_RESOURCE_TYPE_ADDRESS16:
/*
* 16-Bit Address Resource:
* Add the size of the optional ResourceSource info
*/
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
AcpiRsStructOptionLength (
&Resource->Data.Address16.ResourceSource));
break;
case ACPI_RESOURCE_TYPE_ADDRESS32:
/*
* 32-Bit Address Resource:
* Add the size of the optional ResourceSource info
*/
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
AcpiRsStructOptionLength (
&Resource->Data.Address32.ResourceSource));
break;
case ACPI_RESOURCE_TYPE_ADDRESS64:
/*
* 64-Bit Address Resource:
* Add the size of the optional ResourceSource info
*/
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
AcpiRsStructOptionLength (
&Resource->Data.Address64.ResourceSource));
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
/*
* Extended IRQ Resource:
* Add the size of each additional optional interrupt beyond the
* required 1 (4 bytes for each UINT32 interrupt number)
*/
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
((Resource->Data.ExtendedIrq.InterruptCount - 1) * 4) +
/* Add the size of the optional ResourceSource info */
AcpiRsStructOptionLength (
&Resource->Data.ExtendedIrq.ResourceSource));
break;
case ACPI_RESOURCE_TYPE_GPIO:
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
(Resource->Data.Gpio.PinTableLength * 2) +
Resource->Data.Gpio.ResourceSource.StringLength +
Resource->Data.Gpio.VendorLength);
break;
case ACPI_RESOURCE_TYPE_PIN_FUNCTION:
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
(Resource->Data.PinFunction.PinTableLength * 2) +
Resource->Data.PinFunction.ResourceSource.StringLength +
Resource->Data.PinFunction.VendorLength);
break;
case ACPI_RESOURCE_TYPE_SERIAL_BUS:
TotalSize = AcpiGbl_AmlResourceSerialBusSizes [
Resource->Data.CommonSerialBus.Type];
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
Resource->Data.I2cSerialBus.ResourceSource.StringLength +
Resource->Data.I2cSerialBus.VendorLength);
break;
case ACPI_RESOURCE_TYPE_PIN_CONFIG:
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
(Resource->Data.PinConfig.PinTableLength * 2) +
Resource->Data.PinConfig.ResourceSource.StringLength +
Resource->Data.PinConfig.VendorLength);
break;
case ACPI_RESOURCE_TYPE_PIN_GROUP:
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
(Resource->Data.PinGroup.PinTableLength * 2) +
Resource->Data.PinGroup.ResourceLabel.StringLength +
Resource->Data.PinGroup.VendorLength);
break;
case ACPI_RESOURCE_TYPE_PIN_GROUP_FUNCTION:
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
Resource->Data.PinGroupFunction.ResourceSource.StringLength +
Resource->Data.PinGroupFunction.ResourceSourceLabel.StringLength +
Resource->Data.PinGroupFunction.VendorLength);
break;
case ACPI_RESOURCE_TYPE_PIN_GROUP_CONFIG:
TotalSize = (ACPI_RS_LENGTH) (TotalSize +
Resource->Data.PinGroupConfig.ResourceSource.StringLength +
Resource->Data.PinGroupConfig.ResourceSourceLabel.StringLength +
Resource->Data.PinGroupConfig.VendorLength);
break;
default:
break;
}
/* Update the total */
AmlSizeNeeded += TotalSize;
/* Point to the next object */
Resource = ACPI_ADD_PTR (ACPI_RESOURCE, Resource, Resource->Length);
}
/* Did not find an EndTag resource descriptor */
return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
}
/*******************************************************************************
*
* FUNCTION: AcpiRsGetListLength
*
* PARAMETERS: AmlBuffer - Pointer to the resource byte stream
* AmlBufferLength - Size of AmlBuffer
* SizeNeeded - Where the size needed is returned
*
* RETURN: Status
*
* DESCRIPTION: Takes an external resource byte stream and calculates the size
* buffer needed to hold the corresponding internal resource
* descriptor linked list.
*
******************************************************************************/
ACPI_STATUS
AcpiRsGetListLength (
UINT8 *AmlBuffer,
UINT32 AmlBufferLength,
ACPI_SIZE *SizeNeeded)
{
ACPI_STATUS Status;
UINT8 *EndAml;
UINT8 *Buffer;
UINT32 BufferSize;
UINT16 Temp16;
UINT16 ResourceLength;
UINT32 ExtraStructBytes;
UINT8 ResourceIndex;
UINT8 MinimumAmlResourceLength;
AML_RESOURCE *AmlResource;
ACPI_FUNCTION_TRACE (RsGetListLength);
*SizeNeeded = ACPI_RS_SIZE_MIN; /* Minimum size is one EndTag */
EndAml = AmlBuffer + AmlBufferLength;
/* Walk the list of AML resource descriptors */
while (AmlBuffer < EndAml)
{
/* Validate the Resource Type and Resource Length */
Status = AcpiUtValidateResource (NULL, AmlBuffer, &ResourceIndex);
if (ACPI_FAILURE (Status))
{
/*
* Exit on failure. Cannot continue because the descriptor length
* may be bogus also.
*/
return_ACPI_STATUS (Status);
}
AmlResource = (void *) AmlBuffer;
/* Get the resource length and base (minimum) AML size */
ResourceLength = AcpiUtGetResourceLength (AmlBuffer);
MinimumAmlResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
/*
* Augment the size for descriptors with optional
* and/or variable length fields
*/
ExtraStructBytes = 0;
Buffer = AmlBuffer + AcpiUtGetResourceHeaderLength (AmlBuffer);
switch (AcpiUtGetResourceType (AmlBuffer))
{
case ACPI_RESOURCE_NAME_IRQ:
/*
* IRQ Resource:
* Get the number of bits set in the 16-bit IRQ mask
*/
ACPI_MOVE_16_TO_16 (&Temp16, Buffer);
ExtraStructBytes = AcpiRsCountSetBits (Temp16);
break;
case ACPI_RESOURCE_NAME_DMA:
/*
* DMA Resource:
* Get the number of bits set in the 8-bit DMA mask
*/
ExtraStructBytes = AcpiRsCountSetBits (*Buffer);
break;
case ACPI_RESOURCE_NAME_VENDOR_SMALL:
case ACPI_RESOURCE_NAME_VENDOR_LARGE:
/*
* Vendor Resource:
* Get the number of vendor data bytes
*/
ExtraStructBytes = ResourceLength;
/*
* There is already one byte included in the minimum
* descriptor size. If there are extra struct bytes,
* subtract one from the count.
*/
if (ExtraStructBytes)
{
ExtraStructBytes--;
}
break;
case ACPI_RESOURCE_NAME_END_TAG:
/*
* End Tag: This is the normal exit
*/
return_ACPI_STATUS (AE_OK);
case ACPI_RESOURCE_NAME_ADDRESS32:
case ACPI_RESOURCE_NAME_ADDRESS16:
case ACPI_RESOURCE_NAME_ADDRESS64:
/*
* Address Resource:
* Add the size of the optional ResourceSource
*/
ExtraStructBytes = AcpiRsStreamOptionLength (
ResourceLength, MinimumAmlResourceLength);
break;
case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
/*
* Extended IRQ Resource:
* Using the InterruptTableLength, add 4 bytes for each additional
* interrupt. Note: at least one interrupt is required and is
* included in the minimum descriptor size (reason for the -1)
*/
ExtraStructBytes = (Buffer[1] - 1) * sizeof (UINT32);
/* Add the size of the optional ResourceSource */
ExtraStructBytes += AcpiRsStreamOptionLength (
ResourceLength - ExtraStructBytes, MinimumAmlResourceLength);
break;
case ACPI_RESOURCE_NAME_GPIO:
/* Vendor data is optional */
if (AmlResource->Gpio.VendorLength)
{
ExtraStructBytes +=
AmlResource->Gpio.VendorOffset -
AmlResource->Gpio.PinTableOffset +
AmlResource->Gpio.VendorLength;
}
else
{
ExtraStructBytes +=
AmlResource->LargeHeader.ResourceLength +
sizeof (AML_RESOURCE_LARGE_HEADER) -
AmlResource->Gpio.PinTableOffset;
}
break;
case ACPI_RESOURCE_NAME_PIN_FUNCTION:
/* Vendor data is optional */
if (AmlResource->PinFunction.VendorLength)
{
ExtraStructBytes +=
AmlResource->PinFunction.VendorOffset -
AmlResource->PinFunction.PinTableOffset +
AmlResource->PinFunction.VendorLength;
}
else
{
ExtraStructBytes +=
AmlResource->LargeHeader.ResourceLength +
sizeof (AML_RESOURCE_LARGE_HEADER) -
AmlResource->PinFunction.PinTableOffset;
}
break;
case ACPI_RESOURCE_NAME_SERIAL_BUS:
MinimumAmlResourceLength = AcpiGbl_ResourceAmlSerialBusSizes[
AmlResource->CommonSerialBus.Type];
ExtraStructBytes +=
AmlResource->CommonSerialBus.ResourceLength -
MinimumAmlResourceLength;
break;
case ACPI_RESOURCE_NAME_PIN_CONFIG:
/* Vendor data is optional */
if (AmlResource->PinConfig.VendorLength)
{
ExtraStructBytes +=
AmlResource->PinConfig.VendorOffset -
AmlResource->PinConfig.PinTableOffset +
AmlResource->PinConfig.VendorLength;
}
else
{
ExtraStructBytes +=
AmlResource->LargeHeader.ResourceLength +
sizeof (AML_RESOURCE_LARGE_HEADER) -
AmlResource->PinConfig.PinTableOffset;
}
break;
case ACPI_RESOURCE_NAME_PIN_GROUP:
ExtraStructBytes +=
AmlResource->PinGroup.VendorOffset -
AmlResource->PinGroup.PinTableOffset +
AmlResource->PinGroup.VendorLength;
break;
case ACPI_RESOURCE_NAME_PIN_GROUP_FUNCTION:
ExtraStructBytes +=
AmlResource->PinGroupFunction.VendorOffset -
AmlResource->PinGroupFunction.ResSourceOffset +
AmlResource->PinGroupFunction.VendorLength;
break;
case ACPI_RESOURCE_NAME_PIN_GROUP_CONFIG:
ExtraStructBytes +=
AmlResource->PinGroupConfig.VendorOffset -
AmlResource->PinGroupConfig.ResSourceOffset +
AmlResource->PinGroupConfig.VendorLength;
break;
default:
break;
}
/*
* Update the required buffer size for the internal descriptor structs
*
* Important: Round the size up for the appropriate alignment. This
* is a requirement on IA64.
*/
if (AcpiUtGetResourceType (AmlBuffer) ==
ACPI_RESOURCE_NAME_SERIAL_BUS)
{
BufferSize = AcpiGbl_ResourceStructSerialBusSizes[
AmlResource->CommonSerialBus.Type] + ExtraStructBytes;
}
else
{
BufferSize = AcpiGbl_ResourceStructSizes[ResourceIndex] +
ExtraStructBytes;
}
BufferSize = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (BufferSize);
*SizeNeeded += BufferSize;
ACPI_DEBUG_PRINT ((ACPI_DB_RESOURCES,
"Type %.2X, AmlLength %.2X InternalLength %.2X\n",
AcpiUtGetResourceType (AmlBuffer),
AcpiUtGetDescriptorLength (AmlBuffer), BufferSize));
/*
* Point to the next resource within the AML stream using the length
* contained in the resource descriptor header
*/
AmlBuffer += AcpiUtGetDescriptorLength (AmlBuffer);
}
/* Did not find an EndTag resource descriptor */
return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
}
/*******************************************************************************
*
* FUNCTION: AcpiRsGetPciRoutingTableLength
*
* PARAMETERS: PackageObject - Pointer to the package object
* BufferSizeNeeded - UINT32 pointer of the size buffer
* needed to properly return the
* parsed data
*
* RETURN: Status
*
* DESCRIPTION: Given a package representing a PCI routing table, this
* calculates the size of the corresponding linked list of
* descriptions.
*
******************************************************************************/
ACPI_STATUS
AcpiRsGetPciRoutingTableLength (
ACPI_OPERAND_OBJECT *PackageObject,
ACPI_SIZE *BufferSizeNeeded)
{
UINT32 NumberOfElements;
ACPI_SIZE TempSizeNeeded = 0;
ACPI_OPERAND_OBJECT **TopObjectList;
UINT32 Index;
ACPI_OPERAND_OBJECT *PackageElement;
ACPI_OPERAND_OBJECT **SubObjectList;
BOOLEAN NameFound;
UINT32 TableIndex;
ACPI_FUNCTION_TRACE (RsGetPciRoutingTableLength);
NumberOfElements = PackageObject->Package.Count;
/*
* Calculate the size of the return buffer.
* The base size is the number of elements * the sizes of the
* structures. Additional space for the strings is added below.
* The minus one is to subtract the size of the UINT8 Source[1]
* member because it is added below.
*
* But each PRT_ENTRY structure has a pointer to a string and
* the size of that string must be found.
*/
TopObjectList = PackageObject->Package.Elements;
for (Index = 0; Index < NumberOfElements; Index++)
{
/* Dereference the subpackage */
PackageElement = *TopObjectList;
/* We must have a valid Package object */
if (!PackageElement ||
(PackageElement->Common.Type != ACPI_TYPE_PACKAGE))
{
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
/*
* The SubObjectList will now point to an array of the
* four IRQ elements: Address, Pin, Source and SourceIndex
*/
SubObjectList = PackageElement->Package.Elements;
/* Scan the IrqTableElements for the Source Name String */
NameFound = FALSE;
for (TableIndex = 0;
TableIndex < PackageElement->Package.Count && !NameFound;
TableIndex++)
{
if (*SubObjectList && /* Null object allowed */
((ACPI_TYPE_STRING ==
(*SubObjectList)->Common.Type) ||
((ACPI_TYPE_LOCAL_REFERENCE ==
(*SubObjectList)->Common.Type) &&
((*SubObjectList)->Reference.Class ==
ACPI_REFCLASS_NAME))))
{
NameFound = TRUE;
}
else
{
/* Look at the next element */
SubObjectList++;
}
}
TempSizeNeeded += (sizeof (ACPI_PCI_ROUTING_TABLE) - 4);
/* Was a String type found? */
if (NameFound)
{
if ((*SubObjectList)->Common.Type == ACPI_TYPE_STRING)
{
/*
* The length String.Length field does not include the
* terminating NULL, add 1
*/
TempSizeNeeded += ((ACPI_SIZE)
(*SubObjectList)->String.Length + 1);
}
else
{
TempSizeNeeded += AcpiNsGetPathnameLength (
(*SubObjectList)->Reference.Node);
}
}
else
{
/*
* If no name was found, then this is a NULL, which is
* translated as a UINT32 zero.
*/
TempSizeNeeded += sizeof (UINT32);
}
/* Round up the size since each element must be aligned */
TempSizeNeeded = ACPI_ROUND_UP_TO_64BIT (TempSizeNeeded);
/* Point to the next ACPI_OPERAND_OBJECT */
TopObjectList++;
}
/*
* Add an extra element to the end of the list, essentially a
* NULL terminator
*/
*BufferSizeNeeded = TempSizeNeeded + sizeof (ACPI_PCI_ROUTING_TABLE);
return_ACPI_STATUS (AE_OK);
}