/* SPDX-License-Identifier: LGPL-2.1+ */
/*
* Copyright (C) 2004 - 2018 Red Hat, Inc.
*/
/* Definitions related to NetworkManager's D-Bus interfaces.
*
* Note that although this header is installed as part of libnm, it is also
* used by some external code that does not link to libnm.
*/
#ifndef __NM_DBUS_INTERFACE_H__
#define __NM_DBUS_INTERFACE_H__
/* This header must not include glib or libnm. */
#ifndef NM_VERSION_H
#define NM_AVAILABLE_IN_1_2
#define NM_AVAILABLE_IN_1_8
#endif
/*
* dbus services details
*/
#define NM_DBUS_SERVICE "org.freedesktop.NetworkManager"
#define NM_DBUS_INTERFACE "org.freedesktop.NetworkManager"
#define NM_DBUS_INTERFACE_ACCESS_POINT NM_DBUS_INTERFACE ".AccessPoint"
#define NM_DBUS_INTERFACE_ACTIVE_CONNECTION NM_DBUS_INTERFACE ".Connection.Active"
#define NM_DBUS_INTERFACE_CHECKPOINT NM_DBUS_INTERFACE ".Checkpoint"
#define NM_DBUS_INTERFACE_DEVICE NM_DBUS_INTERFACE ".Device"
#define NM_DBUS_INTERFACE_DEVICE_6LOWPAN NM_DBUS_INTERFACE_DEVICE ".Lowpan"
#define NM_DBUS_INTERFACE_DEVICE_ADSL NM_DBUS_INTERFACE_DEVICE ".Adsl"
#define NM_DBUS_INTERFACE_DEVICE_BLUETOOTH NM_DBUS_INTERFACE_DEVICE ".Bluetooth"
#define NM_DBUS_INTERFACE_DEVICE_BOND NM_DBUS_INTERFACE_DEVICE ".Bond"
#define NM_DBUS_INTERFACE_DEVICE_BRIDGE NM_DBUS_INTERFACE_DEVICE ".Bridge"
#define NM_DBUS_INTERFACE_DEVICE_DUMMY NM_DBUS_INTERFACE_DEVICE ".Dummy"
#define NM_DBUS_INTERFACE_DEVICE_GENERIC NM_DBUS_INTERFACE_DEVICE ".Generic"
#define NM_DBUS_INTERFACE_DEVICE_GRE NM_DBUS_INTERFACE_DEVICE ".Gre"
#define NM_DBUS_INTERFACE_DEVICE_INFINIBAND NM_DBUS_INTERFACE_DEVICE ".Infiniband"
#define NM_DBUS_INTERFACE_DEVICE_IP_TUNNEL NM_DBUS_INTERFACE_DEVICE ".IPTunnel"
#define NM_DBUS_INTERFACE_DEVICE_MACSEC NM_DBUS_INTERFACE_DEVICE ".Macsec"
#define NM_DBUS_INTERFACE_DEVICE_MACVLAN NM_DBUS_INTERFACE_DEVICE ".Macvlan"
#define NM_DBUS_INTERFACE_DEVICE_MODEM NM_DBUS_INTERFACE_DEVICE ".Modem"
#define NM_DBUS_INTERFACE_DEVICE_OLPC_MESH NM_DBUS_INTERFACE_DEVICE ".OlpcMesh"
#define NM_DBUS_INTERFACE_DEVICE_OVS_BRIDGE NM_DBUS_INTERFACE_DEVICE ".OvsBridge"
#define NM_DBUS_INTERFACE_DEVICE_OVS_INTERFACE NM_DBUS_INTERFACE_DEVICE ".OvsInterface"
#define NM_DBUS_INTERFACE_DEVICE_OVS_PORT NM_DBUS_INTERFACE_DEVICE ".OvsPort"
#define NM_DBUS_INTERFACE_DEVICE_PPP NM_DBUS_INTERFACE_DEVICE ".Ppp"
#define NM_DBUS_INTERFACE_DEVICE_STATISTICS NM_DBUS_INTERFACE_DEVICE ".Statistics"
#define NM_DBUS_INTERFACE_DEVICE_TEAM NM_DBUS_INTERFACE_DEVICE ".Team"
#define NM_DBUS_INTERFACE_DEVICE_TUN NM_DBUS_INTERFACE_DEVICE ".Tun"
#define NM_DBUS_INTERFACE_DEVICE_VETH NM_DBUS_INTERFACE_DEVICE ".Veth"
#define NM_DBUS_INTERFACE_DEVICE_VLAN NM_DBUS_INTERFACE_DEVICE ".Vlan"
#define NM_DBUS_INTERFACE_DEVICE_VRF NM_DBUS_INTERFACE_DEVICE ".Vrf"
#define NM_DBUS_INTERFACE_DEVICE_VXLAN NM_DBUS_INTERFACE_DEVICE ".Vxlan"
#define NM_DBUS_INTERFACE_DEVICE_WIFI_P2P NM_DBUS_INTERFACE_DEVICE ".WifiP2P"
#define NM_DBUS_INTERFACE_DEVICE_WIMAX NM_DBUS_INTERFACE_DEVICE ".WiMax"
#define NM_DBUS_INTERFACE_DEVICE_WIRED NM_DBUS_INTERFACE_DEVICE ".Wired"
#define NM_DBUS_INTERFACE_DEVICE_WIREGUARD NM_DBUS_INTERFACE_DEVICE ".WireGuard"
#define NM_DBUS_INTERFACE_DEVICE_WIRELESS NM_DBUS_INTERFACE_DEVICE ".Wireless"
#define NM_DBUS_INTERFACE_DEVICE_WPAN NM_DBUS_INTERFACE_DEVICE ".Wpan"
#define NM_DBUS_INTERFACE_DHCP4_CONFIG NM_DBUS_INTERFACE ".DHCP4Config"
#define NM_DBUS_INTERFACE_DHCP6_CONFIG NM_DBUS_INTERFACE ".DHCP6Config"
#define NM_DBUS_INTERFACE_IP4_CONFIG NM_DBUS_INTERFACE ".IP4Config"
#define NM_DBUS_INTERFACE_IP6_CONFIG NM_DBUS_INTERFACE ".IP6Config"
#define NM_DBUS_INTERFACE_WIFI_P2P_PEER NM_DBUS_INTERFACE ".WifiP2PPeer"
#define NM_DBUS_INTERFACE_WIMAX_NSP NM_DBUS_INTERFACE ".WiMax.Nsp"
#define NM_DBUS_PATH "/org/freedesktop/NetworkManager"
#define NM_DBUS_PATH_ACCESS_POINT NM_DBUS_PATH "/AccessPoint"
#define NM_DBUS_PATH_WIFI_P2P_PEER NM_DBUS_PATH "/WifiP2PPeer"
#define NM_DBUS_PATH_WIMAX_NSP NM_DBUS_PATH "/Nsp"
#define NM_DBUS_INTERFACE_SETTINGS "org.freedesktop.NetworkManager.Settings"
#define NM_DBUS_PATH_SETTINGS "/org/freedesktop/NetworkManager/Settings"
#define NM_DBUS_INTERFACE_SETTINGS_CONNECTION "org.freedesktop.NetworkManager.Settings.Connection"
#define NM_DBUS_PATH_SETTINGS_CONNECTION "/org/freedesktop/NetworkManager/Settings/Connection"
#define NM_DBUS_INTERFACE_SETTINGS_CONNECTION_SECRETS \
"org.freedesktop.NetworkManager.Settings.Connection.Secrets"
#define NM_DBUS_INTERFACE_AGENT_MANAGER NM_DBUS_INTERFACE ".AgentManager"
#define NM_DBUS_PATH_AGENT_MANAGER "/org/freedesktop/NetworkManager/AgentManager"
#define NM_DBUS_INTERFACE_SECRET_AGENT NM_DBUS_INTERFACE ".SecretAgent"
#define NM_DBUS_PATH_SECRET_AGENT "/org/freedesktop/NetworkManager/SecretAgent"
#define NM_DBUS_INTERFACE_DNS_MANAGER "org.freedesktop.NetworkManager.DnsManager"
#define NM_DBUS_PATH_DNS_MANAGER "/org/freedesktop/NetworkManager/DnsManager"
/**
* NMCapability:
* @NM_CAPABILITY_TEAM: Teams can be managed. This means the team device plugin
* is loaded.
* @NM_CAPABILITY_OVS: OpenVSwitch can be managed. This means the OVS device plugin
* is loaded. Since: 1.24
*
* #NMCapability names the numbers in the Capabilities property.
* Capabilities are positive numbers. They are part of stable API
* and a certain capability number is guaranteed not to change.
*
* The range 0x7000 - 0x7FFF of capabilities is guaranteed not to be
* used by upstream NetworkManager. It could thus be used for downstream
* extensions.
*/
typedef enum {
NM_CAPABILITY_TEAM = 1,
NM_CAPABILITY_OVS = 2,
} NMCapability;
/**
* NMState:
* @NM_STATE_UNKNOWN: Networking state is unknown. This indicates a daemon error
* that makes it unable to reasonably assess the state. In such event the
* applications are expected to assume Internet connectivity might be present
* and not disable controls that require network access.
* The graphical shells may hide the network accessibility indicator altogether
* since no meaningful status indication can be provided.
* @NM_STATE_ASLEEP: Networking is not enabled, the system is being suspended or
* resumed from suspend.
* @NM_STATE_DISCONNECTED: There is no active network connection.
* The graphical shell should indicate no network connectivity and the
* applications should not attempt to access the network.
* @NM_STATE_DISCONNECTING: Network connections are being cleaned up.
* The applications should tear down their network sessions.
* @NM_STATE_CONNECTING: A network connection is being started
* The graphical shell should indicate the network is being connected while
* the applications should still make no attempts to connect the network.
* @NM_STATE_CONNECTED_LOCAL: There is only local IPv4 and/or IPv6 connectivity,
* but no default route to access the Internet. The graphical shell should
* indicate no network connectivity.
* @NM_STATE_CONNECTED_SITE: There is only site-wide IPv4 and/or IPv6 connectivity.
* This means a default route is available, but the Internet connectivity check
* (see "Connectivity" property) did not succeed. The graphical shell should
* indicate limited network connectivity.
* @NM_STATE_CONNECTED_GLOBAL: There is global IPv4 and/or IPv6 Internet connectivity
* This means the Internet connectivity check succeeded, the graphical shell should
* indicate full network connectivity.
*
* #NMState values indicate the current overall networking state.
**/
typedef enum {
NM_STATE_UNKNOWN = 0,
NM_STATE_ASLEEP = 10,
NM_STATE_DISCONNECTED = 20,
NM_STATE_DISCONNECTING = 30,
NM_STATE_CONNECTING = 40,
NM_STATE_CONNECTED_LOCAL = 50,
NM_STATE_CONNECTED_SITE = 60,
NM_STATE_CONNECTED_GLOBAL = 70,
} NMState;
/**
* NMConnectivityState:
* @NM_CONNECTIVITY_UNKNOWN: Network connectivity is unknown. This means the
* connectivity checks are disabled (e.g. on server installations) or has
* not run yet. The graphical shell should assume the Internet connection
* might be available and not present a captive portal window.
* @NM_CONNECTIVITY_NONE: The host is not connected to any network. There's
* no active connection that contains a default route to the internet and
* thus it makes no sense to even attempt a connectivity check. The graphical
* shell should use this state to indicate the network connection is unavailable.
* @NM_CONNECTIVITY_PORTAL: The Internet connection is hijacked by a captive
* portal gateway. The graphical shell may open a sandboxed web browser window
* (because the captive portals typically attempt a man-in-the-middle attacks
* against the https connections) for the purpose of authenticating to a gateway
* and retrigger the connectivity check with CheckConnectivity() when the
* browser window is dismissed.
* @NM_CONNECTIVITY_LIMITED: The host is connected to a network, does not appear
* to be able to reach the full Internet, but a captive portal has not been
* detected.
* @NM_CONNECTIVITY_FULL: The host is connected to a network, and
* appears to be able to reach the full Internet.
*/
typedef enum {
NM_CONNECTIVITY_UNKNOWN = 0,
NM_CONNECTIVITY_NONE = 1,
NM_CONNECTIVITY_PORTAL = 2,
NM_CONNECTIVITY_LIMITED = 3,
NM_CONNECTIVITY_FULL = 4,
} NMConnectivityState;
/**
* NMDeviceType:
* @NM_DEVICE_TYPE_UNKNOWN: unknown device
* @NM_DEVICE_TYPE_GENERIC: generic support for unrecognized device types
* @NM_DEVICE_TYPE_ETHERNET: a wired ethernet device
* @NM_DEVICE_TYPE_WIFI: an 802.11 Wi-Fi device
* @NM_DEVICE_TYPE_UNUSED1: not used
* @NM_DEVICE_TYPE_UNUSED2: not used
* @NM_DEVICE_TYPE_BT: a Bluetooth device supporting PAN or DUN access protocols
* @NM_DEVICE_TYPE_OLPC_MESH: an OLPC XO mesh networking device
* @NM_DEVICE_TYPE_WIMAX: an 802.16e Mobile WiMAX broadband device
* @NM_DEVICE_TYPE_MODEM: a modem supporting analog telephone, CDMA/EVDO,
* GSM/UMTS, or LTE network access protocols
* @NM_DEVICE_TYPE_INFINIBAND: an IP-over-InfiniBand device
* @NM_DEVICE_TYPE_BOND: a bond master interface
* @NM_DEVICE_TYPE_VLAN: an 802.1Q VLAN interface
* @NM_DEVICE_TYPE_ADSL: ADSL modem
* @NM_DEVICE_TYPE_BRIDGE: a bridge master interface
* @NM_DEVICE_TYPE_TEAM: a team master interface
* @NM_DEVICE_TYPE_TUN: a TUN or TAP interface
* @NM_DEVICE_TYPE_IP_TUNNEL: a IP tunnel interface
* @NM_DEVICE_TYPE_MACVLAN: a MACVLAN interface
* @NM_DEVICE_TYPE_VXLAN: a VXLAN interface
* @NM_DEVICE_TYPE_VETH: a VETH interface
* @NM_DEVICE_TYPE_MACSEC: a MACsec interface
* @NM_DEVICE_TYPE_DUMMY: a dummy interface
* @NM_DEVICE_TYPE_PPP: a PPP interface
* @NM_DEVICE_TYPE_OVS_INTERFACE: a Open vSwitch interface
* @NM_DEVICE_TYPE_OVS_PORT: a Open vSwitch port
* @NM_DEVICE_TYPE_OVS_BRIDGE: a Open vSwitch bridge
* @NM_DEVICE_TYPE_WPAN: a IEEE 802.15.4 (WPAN) MAC Layer Device
* @NM_DEVICE_TYPE_6LOWPAN: 6LoWPAN interface
* @NM_DEVICE_TYPE_WIREGUARD: a WireGuard interface
* @NM_DEVICE_TYPE_WIFI_P2P: an 802.11 Wi-Fi P2P device (Since: 1.16)
* @NM_DEVICE_TYPE_VRF: A VRF (Virtual Routing and Forwarding) interface (Since: 1.24)
*
* #NMDeviceType values indicate the type of hardware represented by a
* device object.
**/
typedef enum {
NM_DEVICE_TYPE_UNKNOWN = 0,
NM_DEVICE_TYPE_ETHERNET = 1,
NM_DEVICE_TYPE_WIFI = 2,
NM_DEVICE_TYPE_UNUSED1 = 3,
NM_DEVICE_TYPE_UNUSED2 = 4,
NM_DEVICE_TYPE_BT = 5, /* Bluetooth */
NM_DEVICE_TYPE_OLPC_MESH = 6,
NM_DEVICE_TYPE_WIMAX = 7,
NM_DEVICE_TYPE_MODEM = 8,
NM_DEVICE_TYPE_INFINIBAND = 9,
NM_DEVICE_TYPE_BOND = 10,
NM_DEVICE_TYPE_VLAN = 11,
NM_DEVICE_TYPE_ADSL = 12,
NM_DEVICE_TYPE_BRIDGE = 13,
NM_DEVICE_TYPE_GENERIC = 14,
NM_DEVICE_TYPE_TEAM = 15,
NM_DEVICE_TYPE_TUN = 16,
NM_DEVICE_TYPE_IP_TUNNEL = 17,
NM_DEVICE_TYPE_MACVLAN = 18,
NM_DEVICE_TYPE_VXLAN = 19,
NM_DEVICE_TYPE_VETH = 20,
NM_DEVICE_TYPE_MACSEC = 21,
NM_DEVICE_TYPE_DUMMY = 22,
NM_DEVICE_TYPE_PPP = 23,
NM_DEVICE_TYPE_OVS_INTERFACE = 24,
NM_DEVICE_TYPE_OVS_PORT = 25,
NM_DEVICE_TYPE_OVS_BRIDGE = 26,
NM_DEVICE_TYPE_WPAN = 27,
NM_DEVICE_TYPE_6LOWPAN = 28,
NM_DEVICE_TYPE_WIREGUARD = 29,
NM_DEVICE_TYPE_WIFI_P2P = 30,
NM_DEVICE_TYPE_VRF = 31,
} NMDeviceType;
/**
* NMDeviceCapabilities:
* @NM_DEVICE_CAP_NONE: device has no special capabilities
* @NM_DEVICE_CAP_NM_SUPPORTED: NetworkManager supports this device
* @NM_DEVICE_CAP_CARRIER_DETECT: this device can indicate carrier status
* @NM_DEVICE_CAP_IS_SOFTWARE: this device is a software device
* @NM_DEVICE_CAP_SRIOV: this device supports single-root I/O virtualization
*
* General device capability flags.
**/
typedef enum { /*< flags >*/
NM_DEVICE_CAP_NONE = 0x00000000,
NM_DEVICE_CAP_NM_SUPPORTED = 0x00000001,
NM_DEVICE_CAP_CARRIER_DETECT = 0x00000002,
NM_DEVICE_CAP_IS_SOFTWARE = 0x00000004,
NM_DEVICE_CAP_SRIOV = 0x00000008,
} NMDeviceCapabilities;
/**
* NMDeviceWifiCapabilities:
* @NM_WIFI_DEVICE_CAP_NONE: device has no encryption/authentication capabilities
* @NM_WIFI_DEVICE_CAP_CIPHER_WEP40: device supports 40/64-bit WEP encryption
* @NM_WIFI_DEVICE_CAP_CIPHER_WEP104: device supports 104/128-bit WEP encryption
* @NM_WIFI_DEVICE_CAP_CIPHER_TKIP: device supports TKIP encryption
* @NM_WIFI_DEVICE_CAP_CIPHER_CCMP: device supports AES/CCMP encryption
* @NM_WIFI_DEVICE_CAP_WPA: device supports WPA1 authentication
* @NM_WIFI_DEVICE_CAP_RSN: device supports WPA2/RSN authentication
* @NM_WIFI_DEVICE_CAP_AP: device supports Access Point mode
* @NM_WIFI_DEVICE_CAP_ADHOC: device supports Ad-Hoc mode
* @NM_WIFI_DEVICE_CAP_FREQ_VALID: device reports frequency capabilities
* @NM_WIFI_DEVICE_CAP_FREQ_2GHZ: device supports 2.4GHz frequencies
* @NM_WIFI_DEVICE_CAP_FREQ_5GHZ: device supports 5GHz frequencies
* @NM_WIFI_DEVICE_CAP_MESH: device supports acting as a mesh point. Since: 1.20.
* @NM_WIFI_DEVICE_CAP_IBSS_RSN: device supports WPA2/RSN in an IBSS network. Since: 1.22.
*
* 802.11 specific device encryption and authentication capabilities.
**/
typedef enum { /*< flags >*/
NM_WIFI_DEVICE_CAP_NONE = 0x00000000,
NM_WIFI_DEVICE_CAP_CIPHER_WEP40 = 0x00000001,
NM_WIFI_DEVICE_CAP_CIPHER_WEP104 = 0x00000002,
NM_WIFI_DEVICE_CAP_CIPHER_TKIP = 0x00000004,
NM_WIFI_DEVICE_CAP_CIPHER_CCMP = 0x00000008,
NM_WIFI_DEVICE_CAP_WPA = 0x00000010,
NM_WIFI_DEVICE_CAP_RSN = 0x00000020,
NM_WIFI_DEVICE_CAP_AP = 0x00000040,
NM_WIFI_DEVICE_CAP_ADHOC = 0x00000080,
NM_WIFI_DEVICE_CAP_FREQ_VALID = 0x00000100,
NM_WIFI_DEVICE_CAP_FREQ_2GHZ = 0x00000200,
NM_WIFI_DEVICE_CAP_FREQ_5GHZ = 0x00000400,
NM_WIFI_DEVICE_CAP_MESH = 0x00001000,
NM_WIFI_DEVICE_CAP_IBSS_RSN = 0x00002000,
} NMDeviceWifiCapabilities;
/**
* NM80211ApFlags:
* @NM_802_11_AP_FLAGS_NONE: access point has no special capabilities
* @NM_802_11_AP_FLAGS_PRIVACY: access point requires authentication and
* encryption (usually means WEP)
* @NM_802_11_AP_FLAGS_WPS: access point supports some WPS method
* @NM_802_11_AP_FLAGS_WPS_PBC: access point supports push-button WPS
* @NM_802_11_AP_FLAGS_WPS_PIN: access point supports PIN-based WPS
*
* 802.11 access point flags.
**/
typedef enum { /*< underscore_name=nm_802_11_ap_flags, flags >*/
NM_802_11_AP_FLAGS_NONE = 0x00000000,
NM_802_11_AP_FLAGS_PRIVACY = 0x00000001,
NM_802_11_AP_FLAGS_WPS = 0x00000002,
NM_802_11_AP_FLAGS_WPS_PBC = 0x00000004,
NM_802_11_AP_FLAGS_WPS_PIN = 0x00000008,
} NM80211ApFlags;
/**
* NM80211ApSecurityFlags:
* @NM_802_11_AP_SEC_NONE: the access point has no special security requirements
* @NM_802_11_AP_SEC_PAIR_WEP40: 40/64-bit WEP is supported for
* pairwise/unicast encryption
* @NM_802_11_AP_SEC_PAIR_WEP104: 104/128-bit WEP is supported for
* pairwise/unicast encryption
* @NM_802_11_AP_SEC_PAIR_TKIP: TKIP is supported for pairwise/unicast encryption
* @NM_802_11_AP_SEC_PAIR_CCMP: AES/CCMP is supported for pairwise/unicast encryption
* @NM_802_11_AP_SEC_GROUP_WEP40: 40/64-bit WEP is supported for group/broadcast
* encryption
* @NM_802_11_AP_SEC_GROUP_WEP104: 104/128-bit WEP is supported for
* group/broadcast encryption
* @NM_802_11_AP_SEC_GROUP_TKIP: TKIP is supported for group/broadcast encryption
* @NM_802_11_AP_SEC_GROUP_CCMP: AES/CCMP is supported for group/broadcast
* encryption
* @NM_802_11_AP_SEC_KEY_MGMT_PSK: WPA/RSN Pre-Shared Key encryption is
* supported
* @NM_802_11_AP_SEC_KEY_MGMT_802_1X: 802.1x authentication and key management
* is supported
* @NM_802_11_AP_SEC_KEY_MGMT_SAE: WPA/RSN Simultaneous Authentication of Equals is
* supported
* @NM_802_11_AP_SEC_KEY_MGMT_OWE: WPA/RSN Opportunistic Wireless Encryption is
* supported
* @NM_802_11_AP_SEC_KEY_MGMT_OWE_TM: WPA/RSN Opportunistic Wireless Encryption
* transition mode is supported. Since: 1.26.
* @NM_802_11_AP_SEC_KEY_MGMT_EAP_SUITE_B_192: WPA3 Enterprise Suite-B 192 bit mode
* is supported. Since: 1.30.
*
* 802.11 access point security and authentication flags. These flags describe
* the current security requirements of an access point as determined from the
* access point's beacon.
**/
typedef enum { /*< underscore_name=nm_802_11_ap_security_flags, flags >*/
NM_802_11_AP_SEC_NONE = 0x00000000,
NM_802_11_AP_SEC_PAIR_WEP40 = 0x00000001,
NM_802_11_AP_SEC_PAIR_WEP104 = 0x00000002,
NM_802_11_AP_SEC_PAIR_TKIP = 0x00000004,
NM_802_11_AP_SEC_PAIR_CCMP = 0x00000008,
NM_802_11_AP_SEC_GROUP_WEP40 = 0x00000010,
NM_802_11_AP_SEC_GROUP_WEP104 = 0x00000020,
NM_802_11_AP_SEC_GROUP_TKIP = 0x00000040,
NM_802_11_AP_SEC_GROUP_CCMP = 0x00000080,
NM_802_11_AP_SEC_KEY_MGMT_PSK = 0x00000100,
NM_802_11_AP_SEC_KEY_MGMT_802_1X = 0x00000200,
NM_802_11_AP_SEC_KEY_MGMT_SAE = 0x00000400,
NM_802_11_AP_SEC_KEY_MGMT_OWE = 0x00000800,
NM_802_11_AP_SEC_KEY_MGMT_OWE_TM = 0x00001000,
NM_802_11_AP_SEC_KEY_MGMT_EAP_SUITE_B_192 = 0x00002000,
} NM80211ApSecurityFlags;
/**
* NM80211Mode:
* @NM_802_11_MODE_UNKNOWN: the device or access point mode is unknown
* @NM_802_11_MODE_ADHOC: for both devices and access point objects, indicates
* the object is part of an Ad-Hoc 802.11 network without a central
* coordinating access point.
* @NM_802_11_MODE_INFRA: the device or access point is in infrastructure mode.
* For devices, this indicates the device is an 802.11 client/station. For
* access point objects, this indicates the object is an access point that
* provides connectivity to clients.
* @NM_802_11_MODE_AP: the device is an access point/hotspot. Not valid for
* access point objects; used only for hotspot mode on the local machine.
* @NM_802_11_MODE_MESH: the device is a 802.11s mesh point. Since: 1.20.
*
* Indicates the 802.11 mode an access point or device is currently in.
**/
typedef enum { /*< underscore_name=nm_802_11_mode >*/
NM_802_11_MODE_UNKNOWN = 0,
NM_802_11_MODE_ADHOC = 1,
NM_802_11_MODE_INFRA = 2,
NM_802_11_MODE_AP = 3,
NM_802_11_MODE_MESH = 4,
} NM80211Mode;
/**
* NMBluetoothCapabilities:
* @NM_BT_CAPABILITY_NONE: device has no usable capabilities
* @NM_BT_CAPABILITY_DUN: device provides Dial-Up Networking capability
* @NM_BT_CAPABILITY_NAP: device provides Network Access Point capability
*
* #NMBluetoothCapabilities values indicate the usable capabilities of a
* Bluetooth device.
**/
typedef enum { /*< flags >*/
NM_BT_CAPABILITY_NONE = 0x00000000,
NM_BT_CAPABILITY_DUN = 0x00000001,
NM_BT_CAPABILITY_NAP = 0x00000002,
} NMBluetoothCapabilities;
/**
* NMDeviceModemCapabilities:
* @NM_DEVICE_MODEM_CAPABILITY_NONE: modem has no usable capabilities
* @NM_DEVICE_MODEM_CAPABILITY_POTS: modem uses the analog wired telephone
* network and is not a wireless/cellular device
* @NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO: modem supports at least one of CDMA
* 1xRTT, EVDO revision 0, EVDO revision A, or EVDO revision B
* @NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS: modem supports at least one of GSM,
* GPRS, EDGE, UMTS, HSDPA, HSUPA, or HSPA+ packet switched data capability
* @NM_DEVICE_MODEM_CAPABILITY_LTE: modem has LTE data capability
*
* #NMDeviceModemCapabilities values indicate the generic radio access
* technology families a modem device supports. For more information on the
* specific access technologies the device supports use the ModemManager D-Bus
* API.
**/
typedef enum { /*< flags >*/
NM_DEVICE_MODEM_CAPABILITY_NONE = 0x00000000,
NM_DEVICE_MODEM_CAPABILITY_POTS = 0x00000001,
NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO = 0x00000002,
NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS = 0x00000004,
NM_DEVICE_MODEM_CAPABILITY_LTE = 0x00000008,
} NMDeviceModemCapabilities;
/**
* NMWimaxNspNetworkType:
* @NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN: unknown network type
* @NM_WIMAX_NSP_NETWORK_TYPE_HOME: home network
* @NM_WIMAX_NSP_NETWORK_TYPE_PARTNER: partner network
* @NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER: roaming partner network
*
* WiMAX network type.
*/
typedef enum {
NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN = 0,
NM_WIMAX_NSP_NETWORK_TYPE_HOME = 1,
NM_WIMAX_NSP_NETWORK_TYPE_PARTNER = 2,
NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER = 3,
} NMWimaxNspNetworkType;
/**
* NMDeviceState:
* @NM_DEVICE_STATE_UNKNOWN: the device's state is unknown
* @NM_DEVICE_STATE_UNMANAGED: the device is recognized, but not managed by
* NetworkManager
* @NM_DEVICE_STATE_UNAVAILABLE: the device is managed by NetworkManager, but
* is not available for use. Reasons may include the wireless switched off,
* missing firmware, no ethernet carrier, missing supplicant or modem manager,
* etc.
* @NM_DEVICE_STATE_DISCONNECTED: the device can be activated, but is currently
* idle and not connected to a network.
* @NM_DEVICE_STATE_PREPARE: the device is preparing the connection to the
* network. This may include operations like changing the MAC address,
* setting physical link properties, and anything else required to connect
* to the requested network.
* @NM_DEVICE_STATE_CONFIG: the device is connecting to the requested network.
* This may include operations like associating with the Wi-Fi AP, dialing
* the modem, connecting to the remote Bluetooth device, etc.
* @NM_DEVICE_STATE_NEED_AUTH: the device requires more information to continue
* connecting to the requested network. This includes secrets like WiFi
* passphrases, login passwords, PIN codes, etc.
* @NM_DEVICE_STATE_IP_CONFIG: the device is requesting IPv4 and/or IPv6
* addresses and routing information from the network.
* @NM_DEVICE_STATE_IP_CHECK: the device is checking whether further action is
* required for the requested network connection. This may include checking
* whether only local network access is available, whether a captive portal
* is blocking access to the Internet, etc.
* @NM_DEVICE_STATE_SECONDARIES: the device is waiting for a secondary
* connection (like a VPN) which must activated before the device can be
* activated
* @NM_DEVICE_STATE_ACTIVATED: the device has a network connection, either local
* or global.
* @NM_DEVICE_STATE_DEACTIVATING: a disconnection from the current network
* connection was requested, and the device is cleaning up resources used for
* that connection. The network connection may still be valid.
* @NM_DEVICE_STATE_FAILED: the device failed to connect to the requested
* network and is cleaning up the connection request
**/
typedef enum {
NM_DEVICE_STATE_UNKNOWN = 0,
NM_DEVICE_STATE_UNMANAGED = 10,
NM_DEVICE_STATE_UNAVAILABLE = 20,
NM_DEVICE_STATE_DISCONNECTED = 30,
NM_DEVICE_STATE_PREPARE = 40,
NM_DEVICE_STATE_CONFIG = 50,
NM_DEVICE_STATE_NEED_AUTH = 60,
NM_DEVICE_STATE_IP_CONFIG = 70,
NM_DEVICE_STATE_IP_CHECK = 80,
NM_DEVICE_STATE_SECONDARIES = 90,
NM_DEVICE_STATE_ACTIVATED = 100,
NM_DEVICE_STATE_DEACTIVATING = 110,
NM_DEVICE_STATE_FAILED = 120,
} NMDeviceState;
/**
* NMDeviceStateReason:
* @NM_DEVICE_STATE_REASON_NONE: No reason given
* @NM_DEVICE_STATE_REASON_UNKNOWN: Unknown error
* @NM_DEVICE_STATE_REASON_NOW_MANAGED: Device is now managed
* @NM_DEVICE_STATE_REASON_NOW_UNMANAGED: Device is now unmanaged
* @NM_DEVICE_STATE_REASON_CONFIG_FAILED: The device could not be readied for configuration
* @NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE: IP configuration could not be reserved (no available address, timeout, etc)
* @NM_DEVICE_STATE_REASON_IP_CONFIG_EXPIRED: The IP config is no longer valid
* @NM_DEVICE_STATE_REASON_NO_SECRETS: Secrets were required, but not provided
* @NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT: 802.1x supplicant disconnected
* @NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED: 802.1x supplicant configuration failed
* @NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED: 802.1x supplicant failed
* @NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT: 802.1x supplicant took too long to authenticate
* @NM_DEVICE_STATE_REASON_PPP_START_FAILED: PPP service failed to start
* @NM_DEVICE_STATE_REASON_PPP_DISCONNECT: PPP service disconnected
* @NM_DEVICE_STATE_REASON_PPP_FAILED: PPP failed
* @NM_DEVICE_STATE_REASON_DHCP_START_FAILED: DHCP client failed to start
* @NM_DEVICE_STATE_REASON_DHCP_ERROR: DHCP client error
* @NM_DEVICE_STATE_REASON_DHCP_FAILED: DHCP client failed
* @NM_DEVICE_STATE_REASON_SHARED_START_FAILED: Shared connection service failed to start
* @NM_DEVICE_STATE_REASON_SHARED_FAILED: Shared connection service failed
* @NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED: AutoIP service failed to start
* @NM_DEVICE_STATE_REASON_AUTOIP_ERROR: AutoIP service error
* @NM_DEVICE_STATE_REASON_AUTOIP_FAILED: AutoIP service failed
* @NM_DEVICE_STATE_REASON_MODEM_BUSY: The line is busy
* @NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE: No dial tone
* @NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER: No carrier could be established
* @NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT: The dialing request timed out
* @NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED: The dialing attempt failed
* @NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED: Modem initialization failed
* @NM_DEVICE_STATE_REASON_GSM_APN_FAILED: Failed to select the specified APN
* @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING: Not searching for networks
* @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED: Network registration denied
* @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT: Network registration timed out
* @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED: Failed to register with the requested network
* @NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED: PIN check failed
* @NM_DEVICE_STATE_REASON_FIRMWARE_MISSING: Necessary firmware for the device may be missing
* @NM_DEVICE_STATE_REASON_REMOVED: The device was removed
* @NM_DEVICE_STATE_REASON_SLEEPING: NetworkManager went to sleep
* @NM_DEVICE_STATE_REASON_CONNECTION_REMOVED: The device's active connection disappeared
* @NM_DEVICE_STATE_REASON_USER_REQUESTED: Device disconnected by user or client
* @NM_DEVICE_STATE_REASON_CARRIER: Carrier/link changed
* @NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED: The device's existing connection was assumed
* @NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE: The supplicant is now available
* @NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND: The modem could not be found
* @NM_DEVICE_STATE_REASON_BT_FAILED: The Bluetooth connection failed or timed out
* @NM_DEVICE_STATE_REASON_GSM_SIM_NOT_INSERTED: GSM Modem's SIM Card not inserted
* @NM_DEVICE_STATE_REASON_GSM_SIM_PIN_REQUIRED: GSM Modem's SIM Pin required
* @NM_DEVICE_STATE_REASON_GSM_SIM_PUK_REQUIRED: GSM Modem's SIM Puk required
* @NM_DEVICE_STATE_REASON_GSM_SIM_WRONG: GSM Modem's SIM wrong
* @NM_DEVICE_STATE_REASON_INFINIBAND_MODE: InfiniBand device does not support connected mode
* @NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED: A dependency of the connection failed
* @NM_DEVICE_STATE_REASON_BR2684_FAILED: Problem with the RFC 2684 Ethernet over ADSL bridge
* @NM_DEVICE_STATE_REASON_MODEM_MANAGER_UNAVAILABLE: ModemManager not running
* @NM_DEVICE_STATE_REASON_SSID_NOT_FOUND: The Wi-Fi network could not be found
* @NM_DEVICE_STATE_REASON_SECONDARY_CONNECTION_FAILED: A secondary connection of the base connection failed
* @NM_DEVICE_STATE_REASON_DCB_FCOE_FAILED: DCB or FCoE setup failed
* @NM_DEVICE_STATE_REASON_TEAMD_CONTROL_FAILED: teamd control failed
* @NM_DEVICE_STATE_REASON_MODEM_FAILED: Modem failed or no longer available
* @NM_DEVICE_STATE_REASON_MODEM_AVAILABLE: Modem now ready and available
* @NM_DEVICE_STATE_REASON_SIM_PIN_INCORRECT: SIM PIN was incorrect
* @NM_DEVICE_STATE_REASON_NEW_ACTIVATION: New connection activation was enqueued
* @NM_DEVICE_STATE_REASON_PARENT_CHANGED: the device's parent changed
* @NM_DEVICE_STATE_REASON_PARENT_MANAGED_CHANGED: the device parent's management changed
* @NM_DEVICE_STATE_REASON_OVSDB_FAILED: problem communicating with Open vSwitch database
* @NM_DEVICE_STATE_REASON_IP_ADDRESS_DUPLICATE: a duplicate IP address was detected
* @NM_DEVICE_STATE_REASON_IP_METHOD_UNSUPPORTED: The selected IP method is not supported
* @NM_DEVICE_STATE_REASON_SRIOV_CONFIGURATION_FAILED: configuration of SR-IOV parameters failed
* @NM_DEVICE_STATE_REASON_PEER_NOT_FOUND: The Wi-Fi P2P peer could not be found
*
* Device state change reason codes
*/
typedef enum {
NM_DEVICE_STATE_REASON_NONE = 0,
NM_DEVICE_STATE_REASON_UNKNOWN = 1,
NM_DEVICE_STATE_REASON_NOW_MANAGED = 2,
NM_DEVICE_STATE_REASON_NOW_UNMANAGED = 3,
NM_DEVICE_STATE_REASON_CONFIG_FAILED = 4,
NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE = 5,
NM_DEVICE_STATE_REASON_IP_CONFIG_EXPIRED = 6,
NM_DEVICE_STATE_REASON_NO_SECRETS = 7,
NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT = 8,
NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED = 9,
NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED = 10,
NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT = 11,
NM_DEVICE_STATE_REASON_PPP_START_FAILED = 12,
NM_DEVICE_STATE_REASON_PPP_DISCONNECT = 13,
NM_DEVICE_STATE_REASON_PPP_FAILED = 14,
NM_DEVICE_STATE_REASON_DHCP_START_FAILED = 15,
NM_DEVICE_STATE_REASON_DHCP_ERROR = 16,
NM_DEVICE_STATE_REASON_DHCP_FAILED = 17,
NM_DEVICE_STATE_REASON_SHARED_START_FAILED = 18,
NM_DEVICE_STATE_REASON_SHARED_FAILED = 19,
NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED = 20,
NM_DEVICE_STATE_REASON_AUTOIP_ERROR = 21,
NM_DEVICE_STATE_REASON_AUTOIP_FAILED = 22,
NM_DEVICE_STATE_REASON_MODEM_BUSY = 23,
NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE = 24,
NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER = 25,
NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT = 26,
NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED = 27,
NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED = 28,
NM_DEVICE_STATE_REASON_GSM_APN_FAILED = 29,
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING = 30,
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED = 31,
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT = 32,
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED = 33,
NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED = 34,
NM_DEVICE_STATE_REASON_FIRMWARE_MISSING = 35,
NM_DEVICE_STATE_REASON_REMOVED = 36,
NM_DEVICE_STATE_REASON_SLEEPING = 37,
NM_DEVICE_STATE_REASON_CONNECTION_REMOVED = 38,
NM_DEVICE_STATE_REASON_USER_REQUESTED = 39,
NM_DEVICE_STATE_REASON_CARRIER = 40,
NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED = 41,
NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE = 42,
NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND = 43,
NM_DEVICE_STATE_REASON_BT_FAILED = 44,
NM_DEVICE_STATE_REASON_GSM_SIM_NOT_INSERTED = 45,
NM_DEVICE_STATE_REASON_GSM_SIM_PIN_REQUIRED = 46,
NM_DEVICE_STATE_REASON_GSM_SIM_PUK_REQUIRED = 47,
NM_DEVICE_STATE_REASON_GSM_SIM_WRONG = 48,
NM_DEVICE_STATE_REASON_INFINIBAND_MODE = 49,
NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED = 50,
NM_DEVICE_STATE_REASON_BR2684_FAILED = 51,
NM_DEVICE_STATE_REASON_MODEM_MANAGER_UNAVAILABLE = 52,
NM_DEVICE_STATE_REASON_SSID_NOT_FOUND = 53,
NM_DEVICE_STATE_REASON_SECONDARY_CONNECTION_FAILED = 54,
NM_DEVICE_STATE_REASON_DCB_FCOE_FAILED = 55,
NM_DEVICE_STATE_REASON_TEAMD_CONTROL_FAILED = 56,
NM_DEVICE_STATE_REASON_MODEM_FAILED = 57,
NM_DEVICE_STATE_REASON_MODEM_AVAILABLE = 58,
NM_DEVICE_STATE_REASON_SIM_PIN_INCORRECT = 59,
NM_DEVICE_STATE_REASON_NEW_ACTIVATION = 60,
NM_DEVICE_STATE_REASON_PARENT_CHANGED = 61,
NM_DEVICE_STATE_REASON_PARENT_MANAGED_CHANGED = 62,
NM_DEVICE_STATE_REASON_OVSDB_FAILED = 63,
NM_DEVICE_STATE_REASON_IP_ADDRESS_DUPLICATE = 64,
NM_DEVICE_STATE_REASON_IP_METHOD_UNSUPPORTED = 65,
NM_DEVICE_STATE_REASON_SRIOV_CONFIGURATION_FAILED = 66,
NM_DEVICE_STATE_REASON_PEER_NOT_FOUND = 67,
} NMDeviceStateReason;
/**
* NMMetered:
* @NM_METERED_UNKNOWN: The metered status is unknown
* @NM_METERED_YES: Metered, the value was explicitly configured
* @NM_METERED_NO: Not metered, the value was explicitly configured
* @NM_METERED_GUESS_YES: Metered, the value was guessed
* @NM_METERED_GUESS_NO: Not metered, the value was guessed
*
* The NMMetered enum has two different purposes: one is to configure
* "connection.metered" setting of a connection profile in #NMSettingConnection, and
* the other is to express the actual metered state of the #NMDevice at a given moment.
*
* For the connection profile only #NM_METERED_UNKNOWN, #NM_METERED_NO
* and #NM_METERED_YES are allowed.
*
* The device's metered state at runtime is determined by the profile
* which is currently active. If the profile explicitly specifies #NM_METERED_NO
* or #NM_METERED_YES, then the device's metered state is as such.
* If the connection profile leaves it undecided at #NM_METERED_UNKNOWN (the default),
* then NetworkManager tries to guess the metered state, for example based on the
* device type or on DHCP options (like Android devices exposing a "ANDROID_METERED"
* DHCP vendor option). This then leads to either #NM_METERED_GUESS_NO or #NM_METERED_GUESS_YES.
*
* Most applications probably should treat the runtime state #NM_METERED_GUESS_YES
* like #NM_METERED_YES, and all other states as not metered.
*
* Note that the per-device metered states are then combined to a global metered
* state. This is basically the metered state of the device with the best default
* route. However, that generalization of a global metered state may not be correct
* if the default routes for IPv4 and IPv6 are on different devices, or if policy
* routing is configured. In general, the global metered state tries to express whether
* the traffic is likely metered, but since that depends on the traffic itself,
* there is not one answer in all cases. Hence, an application may want to consider
* the per-device's metered states.
*
* Since: 1.2
**/
NM_AVAILABLE_IN_1_2
typedef enum {
NM_METERED_UNKNOWN = 0,
NM_METERED_YES = 1,
NM_METERED_NO = 2,
NM_METERED_GUESS_YES = 3,
NM_METERED_GUESS_NO = 4,
} NMMetered;
/**
* NMConnectionMultiConnect:
* @NM_CONNECTION_MULTI_CONNECT_DEFAULT: indicates that the per-connection
* setting is unspecified. In this case, it will fallback to the default
* value, which is %NM_CONNECTION_MULTI_CONNECT_SINGLE.
* @NM_CONNECTION_MULTI_CONNECT_SINGLE: the connection profile can only
* be active once at each moment. Activating a profile that is already active,
* will first deactivate it.
* @NM_CONNECTION_MULTI_CONNECT_MANUAL_MULTIPLE: the profile can
* be manually activated multiple times on different devices. However,
* regarding autoconnect, the profile will autoconnect only if it is
* currently not connected otherwise.
* @NM_CONNECTION_MULTI_CONNECT_MULTIPLE: the profile can autoactivate
* and be manually activated multiple times together.
*
* Since: 1.14
*/
typedef enum {
NM_CONNECTION_MULTI_CONNECT_DEFAULT = 0,
NM_CONNECTION_MULTI_CONNECT_SINGLE = 1,
NM_CONNECTION_MULTI_CONNECT_MANUAL_MULTIPLE = 2,
NM_CONNECTION_MULTI_CONNECT_MULTIPLE = 3,
} NMConnectionMultiConnect;
/**
* NMActiveConnectionState:
* @NM_ACTIVE_CONNECTION_STATE_UNKNOWN: the state of the connection is unknown
* @NM_ACTIVE_CONNECTION_STATE_ACTIVATING: a network connection is being prepared
* @NM_ACTIVE_CONNECTION_STATE_ACTIVATED: there is a connection to the network
* @NM_ACTIVE_CONNECTION_STATE_DEACTIVATING: the network connection is being
* torn down and cleaned up
* @NM_ACTIVE_CONNECTION_STATE_DEACTIVATED: the network connection is disconnected
* and will be removed
*
* #NMActiveConnectionState values indicate the state of a connection to a
* specific network while it is starting, connected, or disconnecting from that
* network.
**/
typedef enum {
NM_ACTIVE_CONNECTION_STATE_UNKNOWN = 0,
NM_ACTIVE_CONNECTION_STATE_ACTIVATING = 1,
NM_ACTIVE_CONNECTION_STATE_ACTIVATED = 2,
NM_ACTIVE_CONNECTION_STATE_DEACTIVATING = 3,
NM_ACTIVE_CONNECTION_STATE_DEACTIVATED = 4,
} NMActiveConnectionState;
/**
* NMActiveConnectionStateReason:
* @NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN: The reason for the active connection
* state change is unknown.
* @NM_ACTIVE_CONNECTION_STATE_REASON_NONE: No reason was given for the active
* connection state change.
* @NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED: The active connection changed
* state because the user disconnected it.
* @NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED: The active connection
* changed state because the device it was using was disconnected.
* @NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED: The service providing the
* VPN connection was stopped.
* @NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID: The IP config of the active
* connection was invalid.
* @NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT: The connection attempt to
* the VPN service timed out.
* @NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT: A timeout occurred
* while starting the service providing the VPN connection.
* @NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED: Starting the service
* providing the VPN connection failed.
* @NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS: Necessary secrets for the
* connection were not provided.
* @NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED: Authentication to the
* server failed.
* @NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED: The connection was
* deleted from settings.
* @NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED: Master connection of this
* connection failed to activate.
* @NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REALIZE_FAILED: Could not create the
* software device link.
* @NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REMOVED: The device this connection
* depended on disappeared.
*
* Active connection state reasons.
*
* Since: 1.8
*/
NM_AVAILABLE_IN_1_8
typedef enum {
NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN = 0,
NM_ACTIVE_CONNECTION_STATE_REASON_NONE = 1,
NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED = 2,
NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED = 3,
NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED = 4,
NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID = 5,
NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT = 6,
NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT = 7,
NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED = 8,
NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS = 9,
NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED = 10,
NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED = 11,
NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED = 12,
NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REALIZE_FAILED = 13,
NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REMOVED = 14,
} NMActiveConnectionStateReason;
/**
* NMSecretAgentGetSecretsFlags:
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_NONE: no special behavior; by default no
* user interaction is allowed and requests for secrets are fulfilled from
* persistent storage, or if no secrets are available an error is returned.
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_ALLOW_INTERACTION: allows the request to
* interact with the user, possibly prompting via UI for secrets if any are
* required, or if none are found in persistent storage.
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW: explicitly prompt for new
* secrets from the user. This flag signals that NetworkManager thinks any
* existing secrets are invalid or wrong. This flag implies that interaction
* is allowed.
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED: set if the request was
* initiated by user-requested action via the D-Bus interface, as opposed to
* automatically initiated by NetworkManager in response to (for example) scan
* results or carrier changes.
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_WPS_PBC_ACTIVE: indicates that WPS enrollment
* is active with PBC method. The agent may suggest that the user pushes a button
* on the router instead of supplying a PSK.
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_ONLY_SYSTEM: Internal flag, not part of
* the D-Bus API.
* @NM_SECRET_AGENT_GET_SECRETS_FLAG_NO_ERRORS: Internal flag, not part of
* the D-Bus API.
*
* #NMSecretAgentGetSecretsFlags values modify the behavior of a GetSecrets request.
*/
typedef enum { /*< flags >*/
NM_SECRET_AGENT_GET_SECRETS_FLAG_NONE = 0x0,
NM_SECRET_AGENT_GET_SECRETS_FLAG_ALLOW_INTERACTION = 0x1,
NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW = 0x2,
NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED = 0x4,
NM_SECRET_AGENT_GET_SECRETS_FLAG_WPS_PBC_ACTIVE = 0x8,
/* Internal to NM; not part of the D-Bus API */
NM_SECRET_AGENT_GET_SECRETS_FLAG_ONLY_SYSTEM = 0x80000000,
NM_SECRET_AGENT_GET_SECRETS_FLAG_NO_ERRORS = 0x40000000,
} NMSecretAgentGetSecretsFlags;
/**
* NMSecretAgentCapabilities:
* @NM_SECRET_AGENT_CAPABILITY_NONE: the agent supports no special capabilities
* @NM_SECRET_AGENT_CAPABILITY_VPN_HINTS: the agent supports passing hints to
* VPN plugin authentication dialogs.
* @NM_SECRET_AGENT_CAPABILITY_LAST: bounds checking value; should not be used.
*
* #NMSecretAgentCapabilities indicate various capabilities of the agent.
*/
typedef enum /*< flags >*/ {
NM_SECRET_AGENT_CAPABILITY_NONE = 0x0,
NM_SECRET_AGENT_CAPABILITY_VPN_HINTS = 0x1,
/* boundary value */
NM_SECRET_AGENT_CAPABILITY_LAST = NM_SECRET_AGENT_CAPABILITY_VPN_HINTS,
} NMSecretAgentCapabilities;
#ifndef NM_VERSION_H
#undef NM_AVAILABLE_IN_1_2
#undef NM_AVAILABLE_IN_1_8
#endif
#define NM_LLDP_ATTR_RAW "raw"
#define NM_LLDP_ATTR_DESTINATION "destination"
#define NM_LLDP_ATTR_CHASSIS_ID_TYPE "chassis-id-type"
#define NM_LLDP_ATTR_CHASSIS_ID "chassis-id"
#define NM_LLDP_ATTR_PORT_ID_TYPE "port-id-type"
#define NM_LLDP_ATTR_PORT_ID "port-id"
#define NM_LLDP_ATTR_PORT_DESCRIPTION "port-description"
#define NM_LLDP_ATTR_SYSTEM_NAME "system-name"
#define NM_LLDP_ATTR_SYSTEM_DESCRIPTION "system-description"
#define NM_LLDP_ATTR_SYSTEM_CAPABILITIES "system-capabilities"
#define NM_LLDP_ATTR_MANAGEMENT_ADDRESSES "management-addresses"
#define NM_LLDP_ATTR_IEEE_802_1_PVID "ieee-802-1-pvid"
#define NM_LLDP_ATTR_IEEE_802_1_VLANS "ieee-802-1-vlans"
#define NM_LLDP_ATTR_IEEE_802_1_PPVIDS "ieee-802-1-ppvids"
#define NM_LLDP_ATTR_IEEE_802_3_MAC_PHY_CONF "ieee-802-3-mac-phy-conf"
#define NM_LLDP_ATTR_IEEE_802_3_POWER_VIA_MDI "ieee-802-3-power-via-mdi"
#define NM_LLDP_ATTR_IEEE_802_3_MAX_FRAME_SIZE "ieee-802-3-max-frame-size"
#define NM_LLDP_ATTR_MUD_URL "mud-url"
/* These are deprecated in favor of NM_LLDP_ATTR_IEEE_802_1_VLANS,
* which can report multiple VLANs */
#define NM_LLDP_ATTR_IEEE_802_1_VID "ieee-802-1-vid"
#define NM_LLDP_ATTR_IEEE_802_1_VLAN_NAME "ieee-802-1-vlan-name"
/* These are deprecated in favor of NM_LLDP_ATTR_IEEE_802_1_PPVIDS,
* which can report multiple PPVIDs */
#define NM_LLDP_ATTR_IEEE_802_1_PPVID "ieee-802-1-ppvid"
#define NM_LLDP_ATTR_IEEE_802_1_PPVID_FLAGS "ieee-802-1-ppvid-flags"
#define NM_LLDP_DEST_NEAREST_BRIDGE "nearest-bridge"
#define NM_LLDP_DEST_NEAREST_NON_TPMR_BRIDGE "nearest-non-tpmr-bridge"
#define NM_LLDP_DEST_NEAREST_CUSTOMER_BRIDGE "nearest-customer-bridge"
/**
* NMIPTunnelMode:
* @NM_IP_TUNNEL_MODE_UNKNOWN: Unknown/unset tunnel mode
* @NM_IP_TUNNEL_MODE_IPIP: IP in IP tunnel
* @NM_IP_TUNNEL_MODE_GRE: GRE tunnel
* @NM_IP_TUNNEL_MODE_SIT: SIT tunnel
* @NM_IP_TUNNEL_MODE_ISATAP: ISATAP tunnel
* @NM_IP_TUNNEL_MODE_VTI: VTI tunnel
* @NM_IP_TUNNEL_MODE_IP6IP6: IPv6 in IPv6 tunnel
* @NM_IP_TUNNEL_MODE_IPIP6: IPv4 in IPv6 tunnel
* @NM_IP_TUNNEL_MODE_IP6GRE: IPv6 GRE tunnel
* @NM_IP_TUNNEL_MODE_VTI6: IPv6 VTI tunnel
* @NM_IP_TUNNEL_MODE_GRETAP: GRETAP tunnel
* @NM_IP_TUNNEL_MODE_IP6GRETAP: IPv6 GRETAP tunnel
*
* The tunneling mode.
*
* Since: 1.2
*/
typedef enum {
NM_IP_TUNNEL_MODE_UNKNOWN = 0,
NM_IP_TUNNEL_MODE_IPIP = 1,
NM_IP_TUNNEL_MODE_GRE = 2,
NM_IP_TUNNEL_MODE_SIT = 3,
NM_IP_TUNNEL_MODE_ISATAP = 4,
NM_IP_TUNNEL_MODE_VTI = 5,
NM_IP_TUNNEL_MODE_IP6IP6 = 6,
NM_IP_TUNNEL_MODE_IPIP6 = 7,
NM_IP_TUNNEL_MODE_IP6GRE = 8,
NM_IP_TUNNEL_MODE_VTI6 = 9,
NM_IP_TUNNEL_MODE_GRETAP = 10,
NM_IP_TUNNEL_MODE_IP6GRETAP = 11,
} NMIPTunnelMode;
/**
* NMCheckpointCreateFlags:
* @NM_CHECKPOINT_CREATE_FLAG_NONE: no flags
* @NM_CHECKPOINT_CREATE_FLAG_DESTROY_ALL: when creating
* a new checkpoint, destroy all existing ones.
* @NM_CHECKPOINT_CREATE_FLAG_DELETE_NEW_CONNECTIONS: upon rollback,
* delete any new connection added after the checkpoint (Since: 1.6)
* @NM_CHECKPOINT_CREATE_FLAG_DISCONNECT_NEW_DEVICES: upon rollback,
* disconnect any new device appeared after the checkpoint (Since: 1.6)
* @NM_CHECKPOINT_CREATE_FLAG_ALLOW_OVERLAPPING: by default, creating
* a checkpoint fails if there are already existing checkoints that
* reference the same devices. With this flag, creation of such
* checkpoints is allowed, however, if an older checkpoint
* that references overlapping devices gets rolled back, it will
* automatically destroy this checkpoint during rollback. This
* allows to create several overlapping checkpoints in parallel,
* and rollback to them at will. With the special case that
* rolling back to an older checkpoint will invalidate all
* overlapping younger checkpoints. This opts-in that the
* checkpoint can be automatically destroyed by the rollback
* of an older checkpoint. (Since: 1.12)
*
* The flags for CheckpointCreate call
*
* Since: 1.4 (gi flags generated since 1.12)
*/
typedef enum { /*< flags >*/
NM_CHECKPOINT_CREATE_FLAG_NONE = 0,
NM_CHECKPOINT_CREATE_FLAG_DESTROY_ALL = 0x01,
NM_CHECKPOINT_CREATE_FLAG_DELETE_NEW_CONNECTIONS = 0x02,
NM_CHECKPOINT_CREATE_FLAG_DISCONNECT_NEW_DEVICES = 0x04,
NM_CHECKPOINT_CREATE_FLAG_ALLOW_OVERLAPPING = 0x08,
} NMCheckpointCreateFlags;
/**
* NMRollbackResult:
* @NM_ROLLBACK_RESULT_OK: the rollback succeeded.
* @NM_ROLLBACK_RESULT_ERR_NO_DEVICE: the device no longer exists.
* @NM_ROLLBACK_RESULT_ERR_DEVICE_UNMANAGED: the device is now unmanaged.
* @NM_ROLLBACK_RESULT_ERR_FAILED: other errors during rollback.
*
* The result of a checkpoint Rollback() operation for a specific device.
*
* Since: 1.4
**/
typedef enum { /*< skip >*/
NM_ROLLBACK_RESULT_OK = 0,
NM_ROLLBACK_RESULT_ERR_NO_DEVICE = 1,
NM_ROLLBACK_RESULT_ERR_DEVICE_UNMANAGED = 2,
NM_ROLLBACK_RESULT_ERR_FAILED = 3,
} NMRollbackResult;
/**
* NMSettingsConnectionFlags:
* @NM_SETTINGS_CONNECTION_FLAG_NONE: an alias for numeric zero, no flags set.
* @NM_SETTINGS_CONNECTION_FLAG_UNSAVED: the connection is not saved to disk.
* That either means, that the connection is in-memory only and currently
* is not backed by a file. Or, that the connection is backed by a file,
* but has modifications in-memory that were not persisted to disk.
* @NM_SETTINGS_CONNECTION_FLAG_NM_GENERATED: A connection is "nm-generated" if
* it was generated by NetworkManger. If the connection gets modified or saved
* by the user, the flag gets cleared. A nm-generated is also unsaved
* and has no backing file as it is in-memory only.
* @NM_SETTINGS_CONNECTION_FLAG_VOLATILE: The connection will be deleted
* when it disconnects. That is for in-memory connections (unsaved), which are
* currently active but deleted on disconnect. Volatile connections are
* always unsaved, but they are also no backing file on disk and are entirely
* in-memory only.
* @NM_SETTINGS_CONNECTION_FLAG_EXTERNAL: the profile was generated to represent
* an external configuration of a networking device. Since: 1.26
*
* Flags describing the current activation state.
*
* Since: 1.12
**/
typedef enum { /*< flags >*/
NM_SETTINGS_CONNECTION_FLAG_NONE = 0,
NM_SETTINGS_CONNECTION_FLAG_UNSAVED = 0x01,
NM_SETTINGS_CONNECTION_FLAG_NM_GENERATED = 0x02,
NM_SETTINGS_CONNECTION_FLAG_VOLATILE = 0x04,
NM_SETTINGS_CONNECTION_FLAG_EXTERNAL = 0x08,
} NMSettingsConnectionFlags;
/**
* NMActivationStateFlags:
* @NM_ACTIVATION_STATE_FLAG_NONE: an alias for numeric zero, no flags set.
* @NM_ACTIVATION_STATE_FLAG_IS_MASTER: the device is a master.
* @NM_ACTIVATION_STATE_FLAG_IS_SLAVE: the device is a slave.
* @NM_ACTIVATION_STATE_FLAG_LAYER2_READY: layer2 is activated and ready.
* @NM_ACTIVATION_STATE_FLAG_IP4_READY: IPv4 setting is completed.
* @NM_ACTIVATION_STATE_FLAG_IP6_READY: IPv6 setting is completed.
* @NM_ACTIVATION_STATE_FLAG_MASTER_HAS_SLAVES: The master has any slave devices attached.
* This only makes sense if the device is a master.
* @NM_ACTIVATION_STATE_FLAG_LIFETIME_BOUND_TO_PROFILE_VISIBILITY: the lifetime
* of the activation is bound to the visibility of the connection profile,
* which in turn depends on "connection.permissions" and whether a session
* for the user exists. Since: 1.16
* @NM_ACTIVATION_STATE_FLAG_EXTERNAL: the active connection was generated to
* represent an external configuration of a networking device. Since: 1.26
*
* Flags describing the current activation state.
*
* Since: 1.10
**/
typedef enum { /*< flags >*/
NM_ACTIVATION_STATE_FLAG_NONE = 0,
NM_ACTIVATION_STATE_FLAG_IS_MASTER = 0x1,
NM_ACTIVATION_STATE_FLAG_IS_SLAVE = 0x2,
NM_ACTIVATION_STATE_FLAG_LAYER2_READY = 0x4,
NM_ACTIVATION_STATE_FLAG_IP4_READY = 0x8,
NM_ACTIVATION_STATE_FLAG_IP6_READY = 0x10,
NM_ACTIVATION_STATE_FLAG_MASTER_HAS_SLAVES = 0x20,
NM_ACTIVATION_STATE_FLAG_LIFETIME_BOUND_TO_PROFILE_VISIBILITY = 0x40,
NM_ACTIVATION_STATE_FLAG_EXTERNAL = 0x80,
} NMActivationStateFlags;
/**
* NMSettingsAddConnection2Flags:
* @NM_SETTINGS_ADD_CONNECTION2_FLAG_NONE: an alias for numeric zero, no flags set.
* @NM_SETTINGS_ADD_CONNECTION2_FLAG_TO_DISK: to persist the connection to disk.
* @NM_SETTINGS_ADD_CONNECTION2_FLAG_IN_MEMORY: to make the connection in-memory only.
* @NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT: usually, when the connection
* has autoconnect enabled and gets added, it becomes eligible to autoconnect
* right away. Setting this flag, disables autoconnect until the connection
* is manually activated.
*
* Numeric flags for the "flags" argument of AddConnection2() D-Bus API.
*
* Since: 1.20
*/
typedef enum { /*< flags >*/
NM_SETTINGS_ADD_CONNECTION2_FLAG_NONE = 0,
NM_SETTINGS_ADD_CONNECTION2_FLAG_TO_DISK = 0x1,
NM_SETTINGS_ADD_CONNECTION2_FLAG_IN_MEMORY = 0x2,
NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT = 0x20,
} NMSettingsAddConnection2Flags;
/**
* NMSettingsUpdate2Flags:
* @NM_SETTINGS_UPDATE2_FLAG_NONE: an alias for numeric zero, no flags set.
* @NM_SETTINGS_UPDATE2_FLAG_TO_DISK: to persist the connection to disk.
* @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY: makes the profile in-memory.
* Note that such profiles are stored in keyfile format under /run.
* If the file is already in-memory, the file in /run is updated in-place.
* Otherwise, the previous storage for the profile is left unchanged
* on disk, and the in-memory copy shadows it.
* Note that the original filename of the previous persistent storage (if any)
* is remembered. That means, when later persisting the profile again to disk,
* the file on disk will be overwritten again.
* Likewise, when finally deleting the profile, both the storage from /run
* and persistent storage are deleted (or if the persistent storage does not
* allow deletion, and nmmeta file is written to mark the UUID as deleted).
* @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED: this is almost the same
* as %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, with one difference: when later deleting
* the profile, the original profile will not be deleted. Instead a nmmeta
* file is written to /run to indicate that the profile is gone.
* Note that if such a nmmeta tombstone file exists and hides a file in persistent
* storage, then when re-adding the profile with the same UUID, then the original
* storage is taken over again.
* @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY: this is like %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY,
* but if the connection has a corresponding file on persistent storage, the file
* will be deleted right away. If the profile is later again persisted to disk,
* a new, unused filename will be chosen.
* @NM_SETTINGS_UPDATE2_FLAG_VOLATILE: This can be specified with either
* %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED
* or %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY.
* After making the connection in-memory only, the connection is marked
* as volatile. That means, if the connection is currently not active
* it will be deleted right away. Otherwise, it is marked to for deletion
* once the connection deactivates. A volatile connection cannot autoactivate
* again (because it's about to be deleted), but a manual activation will
* clear the volatile flag.
* @NM_SETTINGS_UPDATE2_FLAG_BLOCK_AUTOCONNECT: usually, when the connection
* has autoconnect enabled and is modified, it becomes eligible to autoconnect
* right away. Setting this flag, disables autoconnect until the connection
* is manually activated.
* @NM_SETTINGS_UPDATE2_FLAG_NO_REAPPLY: when a profile gets modified that is
* currently active, then these changes don't take effect for the active
* device unless the profile gets reactivated or the configuration reapplied.
* There are two exceptions: by default "connection.zone" and "connection.metered"
* properties take effect immediately. Specify this flag to prevent these
* properties to take effect, so that the change is restricted to modify
* the profile. Since: 1.20.
*
* Since: 1.12
*/
typedef enum { /*< flags >*/
NM_SETTINGS_UPDATE2_FLAG_NONE = 0,
NM_SETTINGS_UPDATE2_FLAG_TO_DISK = 0x1,
NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY = 0x2,
NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED = 0x4,
NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY = 0x8,
NM_SETTINGS_UPDATE2_FLAG_VOLATILE = 0x10,
NM_SETTINGS_UPDATE2_FLAG_BLOCK_AUTOCONNECT = 0x20,
NM_SETTINGS_UPDATE2_FLAG_NO_REAPPLY = 0x40,
} NMSettingsUpdate2Flags;
/**
* NMTernary:
* @NM_TERNARY_DEFAULT: use the globally-configured default value.
* @NM_TERNARY_FALSE: the option is disabled.
* @NM_TERNARY_TRUE: the option is enabled.
*
* An boolean value that can be overridden by a default.
*
* Since: 1.14
**/
typedef enum {
NM_TERNARY_DEFAULT = -1,
NM_TERNARY_FALSE = 0,
NM_TERNARY_TRUE = 1,
} NMTernary;
/**
* NMManagerReloadFlags:
* @NM_MANAGER_RELOAD_FLAG_NONE: an alias for numeric zero, no flags set. This
* reloads everything that is supported and is identical to a SIGHUP.
* @NM_MANAGER_RELOAD_FLAG_CONF: reload the NetworkManager.conf configuration
* from disk. Note that this does not include connections, which can be
* reloaded via Setting's ReloadConnections().
* @NM_MANAGER_RELOAD_FLAG_DNS_RC: update DNS configuration, which usually
* involves writing /etc/resolv.conf anew.
* @NM_MANAGER_RELOAD_FLAG_DNS_FULL: means to restart the DNS plugin. This
* is for example useful when using dnsmasq plugin, which uses additional
* configuration in /etc/NetworkManager/dnsmasq.d. If you edit those files,
* you can restart the DNS plugin. This action shortly interrupts name
* resolution.
* @NM_MANAGER_RELOAD_FLAG_ALL: all flags.
*
* Flags for the manager Reload() call.
*
* Since: 1.22
*/
typedef enum { /*< flags >*/
NM_MANAGER_RELOAD_FLAG_NONE = 0, /*< skip >*/
NM_MANAGER_RELOAD_FLAG_CONF = 0x1,
NM_MANAGER_RELOAD_FLAG_DNS_RC = 0x2,
NM_MANAGER_RELOAD_FLAG_DNS_FULL = 0x4,
NM_MANAGER_RELOAD_FLAG_ALL = 0x7, /*< skip >*/
} NMManagerReloadFlags;
/**
* NMDeviceInterfaceFlags:
* @NM_DEVICE_INTERFACE_FLAG_NONE: an alias for numeric zero, no flags set.
* @NM_DEVICE_INTERFACE_FLAG_UP: the interface is enabled from the
* administrative point of view. Corresponds to kernel IFF_UP.
* @NM_DEVICE_INTERFACE_FLAG_LOWER_UP: the physical link is up. Corresponds
* to kernel IFF_LOWER_UP.
* @NM_DEVICE_INTERFACE_FLAG_CARRIER: the interface has carrier. In most
* cases this is equal to the value of @NM_DEVICE_INTERFACE_FLAG_LOWER_UP.
* However some devices have a non-standard carrier detection mechanism.
*
* Flags for a network interface.
*
* Since: 1.22
*/
typedef enum { /*< flags >*/
/* kernel flags */
NM_DEVICE_INTERFACE_FLAG_NONE = 0, /*< skip >*/
NM_DEVICE_INTERFACE_FLAG_UP = 0x1,
NM_DEVICE_INTERFACE_FLAG_LOWER_UP = 0x2,
/* NM-specific flags */
NM_DEVICE_INTERFACE_FLAG_CARRIER = 0x10000,
} NMDeviceInterfaceFlags;
/**
* NMClientPermission:
* @NM_CLIENT_PERMISSION_NONE: unknown or no permission
* @NM_CLIENT_PERMISSION_ENABLE_DISABLE_NETWORK: controls whether networking
* can be globally enabled or disabled
* @NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIFI: controls whether Wi-Fi can be
* globally enabled or disabled
* @NM_CLIENT_PERMISSION_ENABLE_DISABLE_WWAN: controls whether WWAN (3G) can be
* globally enabled or disabled
* @NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIMAX: controls whether WiMAX can be
* globally enabled or disabled
* @NM_CLIENT_PERMISSION_SLEEP_WAKE: controls whether the client can ask
* NetworkManager to sleep and wake
* @NM_CLIENT_PERMISSION_NETWORK_CONTROL: controls whether networking connections
* can be started, stopped, and changed
* @NM_CLIENT_PERMISSION_WIFI_SHARE_PROTECTED: controls whether a password
* protected Wi-Fi hotspot can be created
* @NM_CLIENT_PERMISSION_WIFI_SHARE_OPEN: controls whether an open Wi-Fi hotspot
* can be created
* @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_SYSTEM: controls whether connections
* that are available to all users can be modified
* @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_OWN: controls whether connections
* owned by the current user can be modified
* @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_HOSTNAME: controls whether the
* persistent hostname can be changed
* @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_GLOBAL_DNS: modify persistent global
* DNS configuration
* @NM_CLIENT_PERMISSION_RELOAD: controls access to Reload.
* @NM_CLIENT_PERMISSION_CHECKPOINT_ROLLBACK: permission to create checkpoints.
* @NM_CLIENT_PERMISSION_ENABLE_DISABLE_STATISTICS: controls whether device
* statistics can be globally enabled or disabled
* @NM_CLIENT_PERMISSION_ENABLE_DISABLE_CONNECTIVITY_CHECK: controls whether
* connectivity check can be enabled or disabled
* @NM_CLIENT_PERMISSION_WIFI_SCAN: controls whether wifi scans can be performed
* @NM_CLIENT_PERMISSION_LAST: a reserved boundary value
*
* #NMClientPermission values indicate various permissions that NetworkManager
* clients can obtain to perform certain tasks on behalf of the current user.
**/
typedef enum {
NM_CLIENT_PERMISSION_NONE = 0,
NM_CLIENT_PERMISSION_ENABLE_DISABLE_NETWORK = 1,
NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIFI = 2,
NM_CLIENT_PERMISSION_ENABLE_DISABLE_WWAN = 3,
NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIMAX = 4,
NM_CLIENT_PERMISSION_SLEEP_WAKE = 5,
NM_CLIENT_PERMISSION_NETWORK_CONTROL = 6,
NM_CLIENT_PERMISSION_WIFI_SHARE_PROTECTED = 7,
NM_CLIENT_PERMISSION_WIFI_SHARE_OPEN = 8,
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_SYSTEM = 9,
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_OWN = 10,
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_HOSTNAME = 11,
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_GLOBAL_DNS = 12,
NM_CLIENT_PERMISSION_RELOAD = 13,
NM_CLIENT_PERMISSION_CHECKPOINT_ROLLBACK = 14,
NM_CLIENT_PERMISSION_ENABLE_DISABLE_STATISTICS = 15,
NM_CLIENT_PERMISSION_ENABLE_DISABLE_CONNECTIVITY_CHECK = 16,
NM_CLIENT_PERMISSION_WIFI_SCAN = 17,
NM_CLIENT_PERMISSION_LAST = 17,
} NMClientPermission;
/**
* NMClientPermissionResult:
* @NM_CLIENT_PERMISSION_RESULT_UNKNOWN: unknown or no authorization
* @NM_CLIENT_PERMISSION_RESULT_YES: the permission is available
* @NM_CLIENT_PERMISSION_RESULT_AUTH: authorization is necessary before the
* permission is available
* @NM_CLIENT_PERMISSION_RESULT_NO: permission to perform the operation is
* denied by system policy
*
* #NMClientPermissionResult values indicate what authorizations and permissions
* the user requires to obtain a given #NMClientPermission
**/
typedef enum {
NM_CLIENT_PERMISSION_RESULT_UNKNOWN = 0,
NM_CLIENT_PERMISSION_RESULT_YES,
NM_CLIENT_PERMISSION_RESULT_AUTH,
NM_CLIENT_PERMISSION_RESULT_NO
} NMClientPermissionResult;
#endif /* __NM_DBUS_INTERFACE_H__ */