<?xml version='1.0'?>
<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
<!ENTITY % entities SYSTEM "common.ent" >
%entities;
]>
<!--
nm-cloud-setup(8) manual page
Copyright 2020 Red Hat, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. You may obtain a copy of the GNU Free Documentation License
from the Free Software Foundation by visiting their Web site or by
writing to:
Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-->
<refentry id="nm-cloud-setup">
<refentryinfo>
<title>nm-cloud-setup</title>
<author>Automatic Network Configuration in Cloud with NetworkManager</author>
</refentryinfo>
<refmeta>
<refentrytitle>nm-cloud-setup</refentrytitle>
<manvolnum>8</manvolnum>
<refmiscinfo class="source">NetworkManager</refmiscinfo>
<refmiscinfo class="manual">Automatic Network Configuration in Cloud with NetworkManager</refmiscinfo>
<refmiscinfo class="version">&NM_VERSION;</refmiscinfo>
</refmeta>
<refnamediv>
<refname>nm-cloud-setup</refname>
<refpurpose>Overview of Automatic Network Configuration in Cloud</refpurpose>
</refnamediv>
<refsect1>
<title>Overview</title>
<para>When running a virtual machine in a public cloud environment, it is
desirable to automatically configure the network of that VM.
In simple setups, the VM only has one network interface and the public
cloud supports automatic configuration via DHCP, DHCP6 or IPv6 autoconf.
However, the virtual machine might have multiple network
interfaces, or multiple IP addresses and IP subnets
on one interface which cannot be configured via DHCP. Also, the administrator
may reconfigure the network while the machine is running. NetworkManager's
nm-cloud-setup is a tool
that automatically picks up such configuration in cloud environments and updates the network
configuration of the host.</para>
<para>Multiple cloud providers are supported. See <xref linkend="providers"/>.</para>
</refsect1>
<refsect1>
<title>Use</title>
<para>The goal of nm-cloud-setup is to be configuration-less and work automatically.
All you need is to opt-in to the desired cloud providers (see <xref linkend="env"/>)
and run <command>/usr/libexec/nm-cloud-setup</command>.</para>
<para>Usually this is done by enabling the nm-cloud-setup.service systemd service
and let it run periodically. For that there is both a nm-cloud-setup.timer systemd timer
and a NetworkManager dispatcher script.</para>
</refsect1>
<refsect1>
<title>Details</title>
<para>
nm-cloud-setup configures the network by fetching the configuration from
the well-known meta data server of the cloud provider. That means, it already
needs the network configured to the point where it can reach the meta data
server. Commonly that means, that a simple connection profile is activated
that possibly uses DHCP to get the primary IP address. NetworkManager will
create such a profile for ethernet devices automatically if it is not configured
otherwise via <literal>"no-auto-default"</literal> setting in NetworkManager.conf.
One possible alternative may be to create such an initial profile with
<command>nmcli device connect "$DEVICE"</command> or
<command>nmcli connection add type ethernet ...</command>.
</para>
<para>
By setting the user-data <literal>org.freedesktop.nm-cloud-setup.skip=yes</literal>
on the profile, nm-cloud-setup will skip the device.
</para>
<para>nm-cloud-setup modifies the run time configuration akin to <command>nmcli device modify</command>.
With this approach, the configuration is not persisted
and only preserved until the device disconnects.</para>
<refsect2>
<title>/usr/libexec/nm-cloud-setup</title>
<para>The binary <command>/usr/libexec/nm-cloud-setup</command> does most of the
work. It supports no command line arguments but can be configured via environment
variables.
See <xref linkend="env"/> for the supported environment variables.</para>
<para>By default, all cloud providers are disabled unless you opt-in by enabling one
or several providers. If cloud providers are enabled, the program
tries to fetch the host's configuration from a meta data server of the cloud via HTTP.
If configuration could be not fetched, no cloud provider are detected and the
program quits.
If host configuration is obtained, the corresponding cloud provider is
successfully detected. Then the network of the host will be configured.</para>
<para>It is intended to re-run nm-cloud-setup every time when the configuration
(maybe) changes. The tool is idempotent, so it should be OK to also run it
more often than necessary. You could run <command>/usr/libexec/nm-cloud-setup</command>
directly. However it may be preferable to restart the nm-cloud-setup systemd
service instead or use the timer or dispatcher script to run it periodically (see below).</para>
</refsect2>
<refsect2>
<title>nm-cloud-setup.service systemd unit</title>
<para>Usually <command>/usr/libexec/nm-cloud-setup</command> is not run directly,
but only by <command>systemctl restart nm-cloud-setup.service</command>. This
ensures that the tool only runs once at any time. It also allows to integrate
with the nm-cloud-setup systemd timer,
and to enable/disable the service via systemd.</para>
<para>As you need to set environment variable to configure nm-cloud-setup binary,
you can do so via systemd override files. Try <command>systemctl edit nm-cloud-setup.service</command>.</para>
</refsect2>
<refsect2>
<title>nm-cloud-setup.timer systemd timer</title>
<para><command>/usr/libexec/nm-cloud-setup</command> is intended to run
whenever an update is necessary. For example, during boot when when
changing the network configuration of the virtual machine via the cloud
provider.</para>
<para>One way to do this, is by enabling the nm-cloud-setup.timer systemd timer
with <command>systemctl enable --now nm-cloud-setup.timer</command>.</para>
</refsect2>
<refsect2>
<title>/usr/lib/NetworkManager/dispatcher.d/90-nm-cloud-setup.sh</title>
<para>There is also a NetworkManager dispatcher script that will
run for example when an interface is activated by NetworkManager.
Together with the nm-cloud-setup.timer systemd timer this
script is to automatically pick up changes to the network.</para>
<para>The dispatcher script will do nothing, unless the systemd service is
enabled. To use the dispatcher script you should therefor run
<command>systemctl enable nm-cloud-setup.service</command> once.</para>
</refsect2>
</refsect1>
<refsect1 id="env">
<title>Environment Variables</title>
<para>The following environment variables are used to configure <command>/usr/libexec/nm-cloud-setup</command>.
You may want to configure them with a drop-in for the systemd service.
For example by calling <command>systemctl edit nm-cloud-setup.service</command>
and configuring <literal>[Service] Environment=</literal>, as described in
<link linkend='systemd.exec'><citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry></link>
manual.</para>
<itemizedlist>
<listitem>
<para><literal>NM_CLOUD_SETUP_LOG</literal>: control the logging verbosity. Set it
to one of <literal>TRACE</literal>, <literal>DEBUG</literal>, <literal>INFO</literal>,
<literal>WARN</literal>, <literal>ERR</literal> or <literal>OFF</literal>. The program
will print message on stdout and the default level is <literal>WARN</literal>.</para>
</listitem>
<listitem>
<para><literal>NM_CLOUD_SETUP_AZURE</literal>: boolean, whether Microsoft Azure support is enabled. Defaults
to <literal>no</literal>.</para>
</listitem>
<listitem>
<para><literal>NM_CLOUD_SETUP_EC2</literal>: boolean, whether Amazon EC2 (AWS) support is enabled. Defaults
to <literal>no</literal>.</para>
</listitem>
<listitem>
<para><literal>NM_CLOUD_SETUP_GCP</literal>: boolean, whether Google GCP support is enabled. Defaults
to <literal>no</literal>.</para>
</listitem>
</itemizedlist>
</refsect1>
<refsect1 id="providers">
<title>Supported Cloud Providers</title>
<refsect2>
<title>Amazon EC2 (AWS)</title>
<para>For AWS, the tools tries to fetch configuration from <literal>http://169.254.169.254/</literal>. Currently, it only
configures IPv4 and does nothing about IPv6. It will do the following.</para>
<itemizedlist>
<listitem>
<para>First fetch <literal>http://169.254.169.254/latest/meta-data/</literal> to determine whether the
expected API is present. This determines whether EC2 environment is detected and whether to proceed
to configure the host using EC2 meta data.</para>
</listitem>
<listitem>
<para>Fetch <literal>http://169.254.169.254/2018-09-24/meta-data/network/interfaces/macs/</literal> to get the list
of available interface. Interfaces are identified by their MAC address.</para>
</listitem>
<listitem>
<para>Then for each interface fetch <literal>http://169.254.169.254/2018-09-24/meta-data/network/interfaces/macs/$MAC/subnet-ipv4-cidr-block</literal>
and <literal>http://169.254.169.254/2018-09-24/meta-data/network/interfaces/macs/$MAC/local-ipv4s</literal>.
Thereby we get a list of local IPv4 addresses and one CIDR subnet block.</para>
</listitem>
<listitem>
<para>Then nm-cloud-setup iterates over all interfaces for which it could fetch IP configuration.
If no ethernet device for the respective MAC address is found, it is skipped.
Also, if the device is currently not activated in NetworkManager or if the currently
activated profile has a user-data <literal>org.freedesktop.nm-cloud-setup.skip=yes</literal>,
it is skipped.</para>
<para>Then, the tool will change the runtime configuration of the device.
<itemizedlist>
<listitem>
<para>Add static IPv4 addresses for all the configured addresses from <literal>local-ipv4s</literal> with
prefix length according to <literal>subnet-ipv4-cidr-block</literal>. For example,
we might have here 2 IP addresses like <literal>"172.16.5.3/24,172.16.5.4/24"</literal>.</para>
</listitem>
<listitem>
<para>Choose a route table 30400 + the index of the interface and
add a default route <literal>0.0.0.0/0</literal>. The gateway
is the first IP address in the CIDR subnet block. For
example, we might get a route <literal>"0.0.0.0/0 172.16.5.1 10 table=30401"</literal>.</para>
</listitem>
<listitem>
<para>Finally, add a policy routing rule for each address. For example
<literal>"priority 30401 from 172.16.5.3/32 table 30401, priority 30401 from 172.16.5.4/32 table 30401"</literal>.</para>
</listitem>
</itemizedlist>
With above example, this roughly corresponds for interface <literal>eth0</literal> to
<command>nmcli device modify "eth0" ipv4.addresses "172.16.5.3/24,172.16.5.4/24" ipv4.routes "0.0.0.0/0 172.16.5.1 10 table=30401" ipv4.routing-rules "priority 30401 from 172.16.5.3/32 table 30401, priority 30401 from 172.16.5.4/32 table 30401"</command>.
Note that this replaces the previous addresses, routes and rules with the new information.
But also note that this only changes the run time configuration of the device. The
connection profile on disk is not affected.
</para>
</listitem>
</itemizedlist>
</refsect2>
<refsect2>
<title>Google Cloud Platform (GCP)</title>
<para>
For GCP, the meta data is fetched from URIs starting with <literal>http://metadata.google.internal/computeMetadata/v1/</literal> with a
HTTP header <literal>"Metadata-Flavor: Google"</literal>.
Currently, the tool only configures IPv4 and does nothing about IPv6. It will do the following.
</para>
<itemizedlist>
<listitem>
<para>First fetch <literal>http://metadata.google.internal/computeMetadata/v1/instance/id</literal> to detect whether the tool
runs on Google Cloud Platform. Only if the platform is detected, it will continue fetching the configuration.</para>
</listitem>
<listitem>
<para>Fetch <literal>http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/</literal> to get the list
of available interface indexes. These indexes can be used for further lookups.</para>
</listitem>
<listitem>
<para>Then, for each interface fetch <literal>http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/$IFACE_INDEX/mac</literal> to get
the corresponding MAC address of the found interfaces. The MAC address is used to identify the device later on.</para>
</listitem>
<listitem>
<para>Then, for each interface with a MAC address fetch <literal>http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/$IFACE_INDEX/forwarded-ips/</literal>
and then all the found IP addresses at <literal>http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/$IFACE_INDEX/forwarded-ips/$FIPS_INDEX</literal>.
</para>
</listitem>
<listitem>
<para>At this point, we have a list of all interfaces (by MAC address) and their configured IPv4 addresses.</para>
<para>For each device, we lookup the currently applied connection in NetworkManager. That implies, that the device is currently activated
in NetworkManager. If no such device was in NetworkManager, or if the profile has user-data <literal>org.freedesktop.nm-cloud-setup.skip=yes</literal>,
we skip the device. Now for each found IP address we add a static route "$FIPS_ADDR/32 0.0.0.0 100 type=local" and reapply the change.</para>
<para>The effect is not unlike calling <command>nmcli device modify "$DEVICE" ipv4.routes "$FIPS_ADDR/32 0.0.0.0 100 type=local [,...]"</command> for all relevant
devices and all found addresses.</para>
</listitem>
</itemizedlist>
</refsect2>
<refsect2>
<title>Microsoft Azure</title>
<para>
For Azure, the meta data is fetched from URIs starting with <literal>http://169.254.169.254/metadata/instance</literal> with a
URL parameter <literal>"?format=text&api-version=2017-04-02"</literal> and a HTTP header <literal>"Metadata:true"</literal>.
Currently, the tool only configures IPv4 and does nothing about IPv6. It will do the following.
</para>
<itemizedlist>
<listitem>
<para>First fetch <literal>http://169.254.169.254/metadata/instance?format=text&api-version=2017-04-02</literal> to detect whether the tool
runs on Azure Cloud. Only if the platform is detected, it will continue fetching the configuration.</para>
</listitem>
<listitem>
<para>Fetch <literal>http://169.254.169.254/metadata/instance/network/interface/?format=text&api-version=2017-04-02</literal> to get the list
of available interface indexes. These indexes can be used for further lookups.</para>
</listitem>
<listitem>
<para>Then, for each interface fetch <literal>http://169.254.169.254/metadata/instance/network/interface/$IFACE_INDEX/macAddress?format=text&api-version=2017-04-02</literal>
to get the corresponding MAC address of the found interfaces. The MAC address is used to identify the device later on.</para>
</listitem>
<listitem>
<para>Then, for each interface with a MAC address fetch <literal>http://169.254.169.254/metadata/instance/network/interface/$IFACE_INDEX/ipv4/ipAddress/?format=text&api-version=2017-04-02</literal>
to get the list of (indexes of) IP addresses on that interface.
</para>
</listitem>
<listitem>
<para>Then, for each IP address index fetch the address at
<literal>http://169.254.169.254/metadata/instance/network/interface/$IFACE_INDEX/ipv4/ipAddress/$ADDR_INDEX/privateIpAddress?format=text&api-version=2017-04-02</literal>.
Also fetch the size of the subnet and prefix for the interface from
<literal>http://169.254.169.254/metadata/instance/network/interface/$IFACE_INDEX/ipv4/subnet/0/address/?format=text&api-version=2017-04-02</literal>.
and
<literal>http://169.254.169.254/metadata/instance/network/interface/$IFACE_INDEX/ipv4/subnet/0/prefix/?format=text&api-version=2017-04-02</literal>.
</para>
</listitem>
<listitem>
<para>At this point, we have a list of all interfaces (by MAC address) and their configured IPv4 addresses.</para>
<para>For each device, we lookup the currently applied connection in NetworkManager. That implies, that the device is currently activated
in NetworkManager. If no such device was in NetworkManager, or if the profile has user-data <literal>org.freedesktop.nm-cloud-setup.skip=yes</literal>,
we skip the device. Now for each found IP address we add a static address "$ADDR/$SUBNET_PREFIX". Also we configure policy routing
by adding a static route "$ADDR/$SUBNET_PREFIX $GATEWAY 10, table=$TABLE" where $GATEWAY is the first IP address in the subnet and table
is 30400 plus the interface index. Also we add a policy routing rule "priority $TABLE from $ADDR/32 table $TABLE".</para>
<para>The effect is not unlike calling
<command>nmcli device modify "$DEVICE" ipv4.addresses "$ADDR/$SUBNET [,...]" ipv4.routes "$ADDR/32 $GATEWAY 10 table=$TABLE" ipv4.routing-rules "priority $TABLE from $ADDR/32 table $TABLE"</command>
for all relevant devices and all found addresses.</para>
</listitem>
</itemizedlist>
</refsect2>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<link linkend='NetworkManager'><citerefentry><refentrytitle>NetworkManager</refentrytitle><manvolnum>8</manvolnum></citerefentry></link>
<link linkend='nmcli'><citerefentry><refentrytitle>nmcli</refentrytitle><manvolnum>1</manvolnum></citerefentry></link>
</para>
</refsect1>
</refentry>