# rpmbuild.at: test rpmbuild
#
# Copyright (C) 2007 Ralf Corsépius <corsepiu@fedoraproject.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
AT_BANNER([RPM build])
# ------------------------------
# Check if rpmbuild -ba *.spec works
AT_SETUP([rpmbuild -ba *.spec])
AT_KEYWORDS([build])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
run rpmbuild \
-ba "${abs_srcdir}"/data/SPECS/hello.spec
],
[0],
[ignore],
[ignore])
AT_CLEANUP
# ------------------------------
# Check if rpmbuild --rebuild *.src.rpm works
AT_SETUP([rpmbuild --rebuild])
AT_KEYWORDS([build])
AT_CHECK([
rm -rf ${TOPDIR}
run rpmbuild \
--rebuild "${abs_srcdir}"/data/SRPMS/hello-1.0-1.src.rpm
],
[0],
[ignore],
[ignore])
AT_CLEANUP
AT_SETUP([rpmbuild --short-circuit -bl])
AT_KEYWORDS([build])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
run rpmbuild -bi "${abs_srcdir}"/data/SPECS/hello.spec &> /dev/null
run rpmbuild --quiet -bl --short-circuit "${abs_srcdir}"/data/SPECS/hello.spec
],
[0],
[],
[])
AT_CLEANUP
# ------------------------------
# Check if tar unpacking works
AT_SETUP([rpmbuild -tb <tar with bad spec>])
AT_KEYWORDS([build])
AT_CHECK([
rm -rf ${TOPDIR}
run rpmbuild \
-tb "${RPMDATA}/SOURCES/hello-1.0.tar.gz"
],
[1],
[ignore],
[error: line 5: Unknown tag: Serial: 1
])
AT_CLEANUP
# ------------------------------
# Check if tar build works
# TODO: test that the rpms are actually created...
AT_SETUP([rpmbuild -tb])
AT_KEYWORDS([build])
AT_CHECK([
rm -rf ${TOPDIR}
run rpmbuild \
-ta "${RPMDATA}/SOURCES/hello-2.0.tar.gz"
],
[0],
[ignore],
[ignore])
AT_CLEANUP
# ------------------------------
# %attr/%defattr tests
AT_SETUP([rpmbuild %attr and %defattr])
AT_KEYWORDS([build])
AT_CHECK([[
rm -rf ${TOPDIR}
runroot rpmbuild \
-bb --quiet /data/SPECS/attrtest.spec
runroot rpm -qp --qf \
"\n[%{filemodes:perms} %-8{fileusername} %-8{filegroupname} %{filenames}\n]"\
/build/RPMS/noarch/attrtest-1.0-1.noarch.rpm
]],
[0],
[
drwx------ root root /a/dir
-r-------- root root /a/file
drwx------ daemon adm /b/dir
-r-------- daemon adm /b/file
drwxr-x--- root adm /c/dir
-rw-r----- daemon root /c/file
drwxr-x--x daemon bin /d/dir
-rw-r--r-- bin daemon /d/file
drwx------ foo bar /e/dir
-r-------- foo bar /e/file
drwxrwx--- bar foo /f/dir
-rw-rw---- bar foo /f/file
drwx------ adm foo /g/dir
-r-------- bar adm /g/file
drwxr-xr-x foo bar /h/dir
-rw-r--r-- foo bar /h/file
drwxr-x--- adm root /i/dir
-rwsr-xr-x root adm /i/file
drwxrwxrwx zoot zoot /j/dir
--w--w--w- zoot zoot /j/file
],
[])
AT_CLEANUP
# ------------------------------
# hardlink tests
AT_SETUP([rpmbuild hardlink])
AT_KEYWORDS([build])
AT_CHECK([
RPMDB_CLEAR
RPMDB_INIT
rm -rf ${TOPDIR}
runroot rpmbuild \
-bb --quiet /data/SPECS/hlinktest.spec
runroot rpm -i /build/RPMS/noarch/hlinktest-1.0-1.noarch.rpm
runroot rpm -q --qf "[[%{filenlinks} %{filenames}\n]]%{longsize}\n" hlinktest
runroot rpm -V --nouser --nogroup hlinktest
ls -i "${RPMTEST}"/foo/hello* | awk {'print $1'} | sort -u | wc -l
],
[0],
[2 /foo/aaaa
1 /foo/copyllo
4 /foo/hello
4 /foo/hello-bar
4 /foo/hello-foo
4 /foo/hello-world
2 /foo/zzzz
87
1
],
[])
AT_CLEANUP
AT_SETUP([rpmbuild unpackaged files])
AT_KEYWORDS([build])
AT_CHECK([
RPMDB_CLEAR
RPMDB_INIT
rm -rf ${TOPDIR}
runroot rpmbuild \
-bb --quiet --with unpackaged_files /data/SPECS/hlinktest.spec
],
[1],
[],
[error: Installed (but unpackaged) file(s) found:
/toot
Installed (but unpackaged) file(s) found:
/toot
])
AT_CLEANUP
# rpm doesn't detect unpackaged directories but should, really
AT_SETUP([rpmbuild unpackaged directories])
AT_KEYWORDS([build])
AT_XFAIL_IF([test $RPM_XFAIL -ne 0])
AT_CHECK([
RPMDB_CLEAR
RPMDB_INIT
rm -rf ${TOPDIR}
runroot rpmbuild \
-bb --quiet --with unpackaged_dirs /data/SPECS/hlinktest.spec
],
[1],
[],
[error: Installed (but unpackaged) file(s) found:
/zoo
Installed (but unpackaged) file(s) found:
/zoo
])
AT_CLEANUP
AT_SETUP([rpmbuild glob])
AT_KEYWORDS([build])
AT_CHECK([
RPMDB_CLEAR
RPMDB_INIT
rm -rf ${TOPDIR}
runroot rpmbuild -bb --quiet /data/SPECS/globtest.spec
runroot rpm -qp \
--qf "[[%{filemodes:perms} %{filenames}\n]]" \
/build/RPMS/noarch/globtest-1.0-1.noarch.rpm
],
[0],
[-rw-r--r-- /opt/globtest/baf
drwxr-xr-x /opt/globtest/bang
-rw-r--r-- /opt/globtest/bif
drwxr-xr-x /opt/globtest/bing
drwxr-xr-x /opt/globtest/bong
drwxr-xr-x /opt/globtest/foo
-rw-r--r-- /opt/globtest/foo/one
-rw-r--r-- /opt/globtest/foo/three
-rw-r--r-- /opt/globtest/foo/two
lrwxrwxrwx /opt/globtest/linkbad
lrwxrwxrwx /opt/globtest/linkgood
-rw-r--r-- /opt/globtest/weird%name
-rw-r--r-- /opt/globtest/zab
-rw-r--r-- /opt/globtest/zeb
-rw-r--r-- /opt/globtest/zib
],
[])
AT_CLEANUP
AT_SETUP([rpmbuild prefixpostfix])
AT_KEYWORDS([build])
AT_CHECK([
RPMDB_CLEAR
RPMDB_INIT
rm -rf ${TOPDIR}
runroot rpmbuild -bb --quiet \
/data/SPECS/prefixtest.spec
runroot rpm -qp \
--qf "[[%{filemodes:perms} %{filenames}\n]]" \
/build/RPMS/noarch/prefixtest-1.0-1.noarch.rpm
],
[0],
[-rw-r--r-- /opt/prefixtest/ba
drwxr-xr-x /opt/prefixtest/ban
-rw-r--r-- /opt/prefixtest/bi
drwxr-xr-x /opt/prefixtest/bin
drwxr-xr-x /opt/prefixtest/bon
drwxr-xr-x /opt/prefixtest/foo
-rw-r--r-- /opt/prefixtest/foo/one
-rw-r--r-- /opt/prefixtest/foo/three
-rw-r--r-- /opt/prefixtest/foo/two
lrwxrwxrwx /opt/prefixtest/linkbad
lrwxrwxrwx /opt/prefixtest/linkgood
-rw-r--r-- /opt/prefixtest/weird%name
-rw-r--r-- /opt/prefixtest/zab
-rw-r--r-- /opt/prefixtest/zeb
-rw-r--r-- /opt/prefixtest/zib
],
[])
AT_CLEANUP
# ------------------------------
# Check if weak and reverse requires can be built
AT_SETUP([Weak and reverse requires])
AT_KEYWORDS([build])
AT_CHECK([
runroot rpmbuild -bb --quiet \
--define "pkg weakdeps" \
--define "recs foo > 1.2.3" \
--define "sugs bar >= 0.1.2" \
--define "sups baz" \
--define "ens zap = 3" \
/data/SPECS/deptest.spec
runroot rpm -qp --recommends /build/RPMS/noarch/deptest-weakdeps-1.0-1.noarch.rpm
runroot rpm -qp --suggests /build/RPMS/noarch/deptest-weakdeps-1.0-1.noarch.rpm
runroot rpm -qp --supplements /build/RPMS/noarch/deptest-weakdeps-1.0-1.noarch.rpm
runroot rpm -qp --enhances /build/RPMS/noarch/deptest-weakdeps-1.0-1.noarch.rpm
],
[0],
[foo > 1.2.3
bar >= 0.1.2
baz
zap = 3
],
[ignore])
AT_CLEANUP
# ------------------------------
# Test BuildRequire functionality
AT_SETUP([Build requires])
AT_KEYWORDS([build])
AT_CHECK([
runroot rpmbuild -bb --quiet \
--define "pkg buildreq" \
--define "buildreqs foo > 1.2.3" \
/data/SPECS/deptest.spec
],
[1],
[],
[error: Failed build dependencies:
foo > 1.2.3 is needed by deptest-buildreq-1.0-1.noarch
])
AT_CLEANUP
AT_SETUP([Dependency generation])
AT_KEYWORDS([build])
AT_CHECK([
runroot rpmbuild -bb --quiet \
/data/SPECS/filedep.spec
echo Requires:
runroot rpm -qp --requires /build/RPMS/noarch/filedep-1.0-1.noarch.rpm
echo Provides:
runroot rpm -qp --provides /build/RPMS/noarch/filedep-1.0-1.noarch.rpm
echo Filerequires:
runroot rpm -qp --qf '[["%{FILENAMES}\t%{FILEREQUIRE}"\n]]' /build/RPMS/noarch/filedep-1.0-1.noarch.rpm
echo Fileprovides:
runroot rpm -qp --qf '[["%{FILENAMES}\t%{FILEPROVIDE}"\n]]' /build/RPMS/noarch/filedep-1.0-1.noarch.rpm
],
[0],
[Requires:
/bin/f00f
/bin/sh
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Provides:
filedep = 1.0-1
Filerequires:
"/etc/foo.conf "
"/usr/bin/bar /bin/f00f"
"/usr/bin/foo /bin/sh"
"/usr/share/doc/filedep "
"/usr/share/doc/filedep/README "
Fileprovides:
"/etc/foo.conf "
"/usr/bin/bar "
"/usr/bin/foo "
"/usr/share/doc/filedep "
"/usr/share/doc/filedep/README "
],
[])
AT_CLEANUP
# ------------------------------
# Test spec query functionality
AT_SETUP([rpmspec query 1])
AT_KEYWORDS([build])
AT_CHECK([
runroot rpmspec -q \
--define "pkg dep" \
--define "reqs foo > 1.2.3 bar <= 2.3" \
--requires \
/data/SPECS/deptest.spec
],
[0],
[bar <= 2.3
foo > 1.2.3
],
[])
AT_CLEANUP
# ------------------------------
# archive sanity check
AT_SETUP([rpmbuild archive sanity])
AT_KEYWORDS([build])
AT_CHECK([
rm -rf ${TOPDIR}
runroot rpmbuild \
-bb --quiet /data/SPECS/attrtest.spec
runroot rpm2cpio \
/build/RPMS/noarch/attrtest-1.0-1.noarch.rpm > /tmp/attrtest.cpio
],
[0],
[],
[])
AT_CLEANUP
# ------------------------------
# Check if rpmbuild creates the minisymtab section in the main hello binary
AT_SETUP([rpmbuild debuginfo minisymtab])
AT_KEYWORDS([build] [debuginfo])
AT_CHECK([
rm -rf ${TOPDIR}
# Use macros.debug to generate a debuginfo package.
export CFLAGS="-g"
rundebug rpmbuild --quiet \
--rebuild "${abs_srcdir}"/data/SRPMS/hello-1.0-1.src.rpm
# Extract the main package and inspect the hello binary
# It should contain .gnu_debugdata, but not the full .symtab
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello-1.0-1.*.rpm | cpio -diu
test -f ./usr/local/bin/hello || exit 1
readelf -S ./usr/local/bin/hello |\
grep -q .gnu_debugdata; test $? == 0 || exit 1
readelf -S ./usr/local/bin/hello \
| grep -q .symtab; test $? == 1 || exit 1
# And the opposite for the debuginfo package
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello-debuginfo-1.0-1.*.rpm \
| cpio -diu
test -f ./usr/lib/debug/usr/local/bin/hello*.debug || exit 1
readelf -S ./usr/lib/debug/usr/local/bin/hello*.debug \
| grep -q .gnu_debugdata; test $? == 1 || exit 1
readelf -S ./usr/lib/debug/usr/local/bin/hello*.debug \
| grep -q .symtab; test $? == 0 || exit 1
],
[0],
[],
[ignore])
AT_CLEANUP
# ------------------------------
# Check if rpmbuild doesn't create the minisymtab section if we keep symtab
# Some package might want to use strip -g to keep the symbol table and only
# but the debug symbols/info in the debuginfo package.
AT_SETUP([rpmbuild debuginfo minisymtab strip -g])
AT_KEYWORDS([build] [debuginfo])
AT_CHECK([
rm -rf ${TOPDIR}
# Use macros.debug to generate a debuginfo package.
export CFLAGS="-g"
rundebug rpmbuild --quiet \
--define="_find_debuginfo_opts -g" \
--rebuild "${abs_srcdir}"/data/SRPMS/hello-1.0-1.src.rpm
# Extract the main package and inspect the hello binary
# It should contain .symtab (because of strip -g), so doesn't .gnu_debugdata.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello-1.0-1.*.rpm | cpio -diu
test -f ./usr/local/bin/hello || exit 1
readelf -S ./usr/local/bin/hello \
| grep -q .gnu_debugdata; test $? == 1 || exit 1
readelf -S ./usr/local/bin/hello \
| grep -q .symtab; test $? == 0 || exit 1
# The debuginfo package should contain neither. The .symtab is NOBITS.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello-debuginfo-1.0-1.*.rpm \
| cpio -diu
test -f ./usr/lib/debug/usr/local/bin/hello*.debug || exit 1
readelf -S ./usr/lib/debug/usr/local/bin/hello*.debug \
| grep -q .gnu_debugdata; test $? == 1 || exit 1
readelf -S ./usr/lib/debug/usr/local/bin/hello*.debug \
| grep .symtab | grep -q NOBITS; test $? == 0 || exit 1
],
[0],
[],
[ignore])
AT_CLEANUP
# ------------------------------
# Check if rpmbuild runs dwz and generates a multi file that with shared
# debuginfo. This is simply the hello example with one binary build twice
# so dwz has enough slightly similar debug data.
# Test the case without unique debug file names.
AT_SETUP([rpmbuild debuginfo dwz])
AT_KEYWORDS([build] [debuginfo] [dwz])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--undefine "_unique_debug_names" \
--undefine "_unique_debug_srcs" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# The debuginfo package should contain a .debug file for each binary
# and a dwz multi file that contains the shared debuginfo between them.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu
hello_file_debug=./usr/lib/debug/usr/local/bin/hello.debug
hello2_file_debug=./usr/lib/debug/usr/local/bin/hello2.debug
hello_multi_file=./usr/lib/debug/.dwz/hello2-1.0-1.*
test -f $hello_file_debug || echo "no hello debug file: $hello_file_debug"
test -f $hello2_file_debug || echo "no hello2 debug file: $hello2_file_debug"
test -f $hello_multi_file || echo "no dwz multi file: $hello_multi_file"
# Make sure the main package binaries contain the correct build-ids
# linking them to the debug packages.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-1.0-1.*.rpm \
| cpio -diu
hello_file=./usr/local/bin/hello
hello2_file=./usr/local/bin/hello2
test -f $hello_file || echo "no hello file: $hello_file"
test -f $hello2_file || echo "no hello2 file: $hello2_file"
id1=$(file $hello_file | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
id2=$(file $hello2_file | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
id1debug=$(file $hello_file_debug | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
id2debug=$(file $hello2_file_debug | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
idmulti=$(file $hello_multi_file | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
test "$id1" = "$id1debug" || echo "id1: $id1 != id1debug: $id1debug"
test "$id2" = "$id2debug" || echo "id2: $id2 != id2debug: $id2debug"
# The build-id files should link to the .debug files.
id1file="./usr/lib/debug/.build-id/${id1:0:2}/${id1:2}"
canonid1file=$(readlink -f ${id1file})
canonfile1=$(readlink -f $hello_file)
canonid1debug=$(readlink -f ${id1file}.debug)
canondebug1=$(readlink -f $hello_file_debug)
test "$canonid1file" = "$canonfile1" \
|| echo "canonid1file: $canonid1file != $canonfile1"
test "$canonid1debug" = "$canondebug1" \
|| echo "canonid1debug: $canonid1debug != $canondebug1"
id2file="./usr/lib/debug/.build-id/${id2:0:2}/${id2:2}"
canonid2file=$(readlink -f ${id2file})
canonfile2=$(readlink -f $hello2_file)
canonid2debug=$(readlink -f ${id2file}.debug)
canondebug2=$(readlink -f $hello2_file_debug)
test "$canonid2file" = "$canonfile2" \
|| echo "canonid2: $canonid2file != $canonfile2"
test "$canonid2debug" = "$canondebug2" \
|| echo "canonid2debug: $canonid2debug" != "$canondebug2"
# Both .debug files should point to the dwz multi file.
# It would be nice to also test that they contain the correct dwz build-id
# but that is a bit hard to grep out of the section data.
multiref1=$(readelf --string-dump=.gnu_debugaltlink $hello_file_debug \
| grep '[ 0]' | cut -c13-)
multiref2=$(readelf --string-dump=.gnu_debugaltlink $hello2_file_debug \
| grep '[ 0]' | cut -c13-)
test "$multiref1" = "$multiref2" || echo "multiref: $multiref1 != $multiref2"
canonmultiref=$(readlink -f $(dirname $canondebug1)/$multiref1)
canonmultifile=$(readlink -f $hello_multi_file)
test "$canonmultiref" = "$canonmultifile" \
|| echo "canonmultiref: $canonmultiref" != "$canonmultifile"
],
[0],
[],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that rpmbuild creates no debuginfo when --nodebuginfo is passed
AT_SETUP([rpmbuild no debuginfo])
AT_KEYWORDS([build] [debuginfo])
AT_CHECK([
rm -rf ${TOPDIR}
# Use macros.debug to generate a debuginfo package,
# but pass --nodebuginfo to skip it.
export CFLAGS="-g"
rundebug rpmbuild --quiet --nodebuginfo \
--rebuild "${abs_srcdir}"/data/SRPMS/hello-1.0-1.src.rpm
# Extract the main package and inspect the hello binary
# It should not contain .gnu_debugdata, but the full .symtab
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello-1.0-1.*.rpm | cpio -diu
test -f ./usr/local/bin/hello || exit 1
readelf -S ./usr/local/bin/hello |\
grep -q .gnu_debugdata; test $? == 1 || exit 1
readelf -S ./usr/local/bin/hello \
| grep -q .symtab; test $? == 0 || exit 1
# And the opposite for the debuginfo package
test ! -e ${abs_builddir}/testing/build/RPMS/*/hello-debuginfo-1.0-1.*.rpm || exit 1
],
[0],
[],
[ignore])
AT_CLEANUP
# ------------------------------
# Check if rpmbuild runs dwz and generates a multi file that with shared
# debuginfo. This is simply the hello example with one binary build twice
# so dwz has enough slightly similar debug data.
# Test with unique debug file names.
AT_SETUP([rpmbuild debuginfo dwz unique debug names])
AT_KEYWORDS([build] [debuginfo] [dwz])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_unique_debug_names 1" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# The debuginfo package should contain a .debug file for each binary
# and a dwz multi file that contains the shared debuginfo between them.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu
hello_file_debug=./usr/lib/debug/usr/local/bin/hello-*.debug
hello2_file_debug=./usr/lib/debug/usr/local/bin/hello2-*.debug
hello_multi_file=./usr/lib/debug/.dwz/hello2-1.0-1.*
test -f $hello_file_debug || echo "no hello debug file: $hello_file_debug"
test -f $hello2_file_debug || echo "no hello2 debug file: $hello2_file_debug"
test -f $hello_multi_file || echo "no dwz multi file: $hello_multi_file"
# Make sure the main package binaries contain the correct build-ids
# linking them to the debug packages.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-1.0-1.*.rpm \
| cpio -diu
hello_file=./usr/local/bin/hello
hello2_file=./usr/local/bin/hello2
test -f $hello_file || echo "no hello file: $hello_file"
test -f $hello2_file || echo "no hello2 file: $hello2_file"
id1=$(file $hello_file | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
id2=$(file $hello2_file | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
id1debug=$(file $hello_file_debug | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
id2debug=$(file $hello2_file_debug | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
idmulti=$(file $hello_multi_file | sed 's/.*, BuildID\[[.*\]]=\([[0-9a-f]]*\),.*/\1/')
test "$id1" = "$id1debug" || echo "id1: $id1 != id1debug: $id1debug"
test "$id2" = "$id2debug" || echo "id2: $id2 != id2debug: $id2debug"
# The build-id files should link to the .debug files.
id1file="./usr/lib/debug/.build-id/${id1:0:2}/${id1:2}"
canonid1file=$(readlink -f ${id1file})
canonfile1=$(readlink -f $hello_file)
canonid1debug=$(readlink -f ${id1file}.debug)
canondebug1=$(readlink -f $hello_file_debug)
test "$canonid1file" = "$canonfile1" \
|| echo "canonid1file: $canonid1file != $canonfile1"
test "$canonid1debug" = "$canondebug1" \
|| echo "canonid1debug: $canonid1debug != $canondebug1"
id2file="./usr/lib/debug/.build-id/${id2:0:2}/${id2:2}"
canonid2file=$(readlink -f ${id2file})
canonfile2=$(readlink -f $hello2_file)
canonid2debug=$(readlink -f ${id2file}.debug)
canondebug2=$(readlink -f $hello2_file_debug)
test "$canonid2file" = "$canonfile2" \
|| echo "canonid2: $canonid2file != $canonfile2"
test "$canonid2debug" = "$canondebug2" \
|| echo "canonid2debug: $canonid2debug" != "$canondebug2"
# Both .debug files should point to the dwz multi file.
# It would be nice to also test that they contain the correct dwz build-id
# but that is a bit hard to grep out of the section data.
multiref1=$(readelf --string-dump=.gnu_debugaltlink $hello_file_debug \
| grep '[ 0]' | cut -c13-)
multiref2=$(readelf --string-dump=.gnu_debugaltlink $hello2_file_debug \
| grep '[ 0]' | cut -c13-)
test "$multiref1" = "$multiref2" || echo "multiref: $multiref1 != $multiref2"
canonmultiref=$(readlink -f $(dirname $canondebug1)/$multiref1)
canonmultifile=$(readlink -f $hello_multi_file)
test "$canonmultiref" = "$canonmultifile" \
|| echo "canonmultiref: $canonmultiref" != "$canonmultifile"
],
[0],
[],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that old style gnu_debuglink CRC checksums are correct even after
# using dwz to compress the debuginfo files.
AT_SETUP([rpmbuild debuginfo dwz gnu_debuglink crc])
AT_KEYWORDS([build] [debuginfo])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# Unpack the main and debuginfo rpms so we can check binaries and .debug files.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-1.0-1.*.rpm \
| cpio -diu
# Check that dwz has ran and a multi file has been produced
test -f ./usr/lib/debug/.dwz/hello2-1.0-1.* || exit 1
# Run sepdbugcrcfix on the binaries, both should have correct CRC already.
${abs_top_builddir}/sepdebugcrcfix ./usr/lib/debug \
./usr/local/bin/hello ./usr/local/bin/hello2 | grep CRC32 | cut -f2 -d:
],
[0],
[ Updated 0 CRC32s, 2 CRC32s did match.
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that an implicit suid binary get included with the suid bit set.
# We explicitly build with all debug.macros to test those helpers.
AT_SETUP([rpmbuild implicit suid binary])
AT_KEYWORDS([build] [debuginfo] [dwz] [suid])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that has some debuginfo
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
-ba "${abs_srcdir}"/data/SPECS/hello2-suid.spec
# Unpack rpm so we can check the included binaries.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-1.0-1.*.rpm \
| cpio -diu --quiet
# List all binaries with suid bit set (should be one, hello).
echo "suid:"
find usr -executable -type f -perm /4000
# List all binaries without suid bit set (should also be one, hello2).
echo "no-suid:"
find usr -executable -type f \! -perm /4000
],
[0],
[suid:
usr/local/bin/hello
no-suid:
usr/local/bin/hello2
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that a GDB index is included when requested.
AT_SETUP([rpmbuild debuginfo gdb index included])
AT_KEYWORDS([build] [debuginfo] [gdb])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that has some debuginfo
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_include_gdb_index 1" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# Unpack the debuginfo rpms so we can check the .debug files.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
# Check that gdb-add-index has ran and a .gdb_index section has been added
readelf -S ./usr/lib/debug/usr/local/bin/hello2*.debug \
| grep gdb_index | cut -c8-17
],
[0],
[.gdb_index
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that a GDB index is NOT included when not requested.
AT_SETUP([rpmbuild debuginfo no gdb index included])
AT_KEYWORDS([build] [debuginfo] [gdb])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that has some debuginfo
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--undefine "_include_gdb_index" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# Unpack the debuginfo rpms so we can check the .debug files.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
# Check that gdb-add-index has not ran and no .gdb_index section has been added
readelf -S ./usr/lib/debug/usr/local/bin/hello2*.debug \
| grep gdb_index | cut -c8-17
],
[0],
[],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that a debug source is in a "unique" directory when requested.
AT_SETUP([rpmbuild debuginfo unique debug src dir])
AT_KEYWORDS([build] [debuginfo])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that has some debuginfo
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
# Note that the spec defines hello2 as name, but the source is hello-1.0.
# Disable dwz to make debuginfo path rewrite checking easier.
rundebug rpmbuild --quiet \
--undefine "_find_debuginfo_dwz_opts" \
--define "_unique_debug_srcs 1" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# Unpack the debuginfo rpms so we can check the .debug files.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
# Check that the source path is "unique"
# Drop the final arch prefix to make the test arch-independent.
ls ./usr/src/debug/ | cut -f1,2 -d\.
# Check that the source path has been rewritten in the .debug file.
# Drop the final arch prefix to make the test arch-independent.
readelf --debug-dump=info ./usr/lib/debug/usr/local/bin/hello2*.debug \
| grep comp_dir | sed -e 's/\t$//' | cut -f5- -d/ | cut -f1,2 -d\.
],
[0],
[hello2-1.0-1
hello2-1.0-1
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that a debug source is NOT in a "unique" directory when not requested.
# It will be in the "build directory" name under /usr/src/debug.
AT_SETUP([rpmbuild debuginfo no unique debug src dir])
AT_KEYWORDS([build] [debuginfo])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that has some debuginfo
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
# Note that the spec defines hello2 as name, but the source is hello-1.0.
# Disable dwz to make debuginfo path rewrite checking easier.
rundebug rpmbuild --quiet \
--undefine "_find_debuginfo_dwz_opts" \
--undefine "_unique_debug_srcs" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# Unpack the debuginfo rpms so we can check the .debug files.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
# Check that the source path is "unique"
ls ./usr/src/debug/
# Check that the source path has been rewritten in the .debug file.
readelf --debug-dump=info ./usr/lib/debug/usr/local/bin/hello2*.debug \
| grep comp_dir | sed -e 's/\t$//' | cut -f5- -d/
],
[0],
[hello-1.0
hello-1.0
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debugsource_packages creates -debugsource package
AT_SETUP([rpmbuild debugsource])
AT_KEYWORDS([build] [debuginfo] [debugsource])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Build a package that has some debuginfo
cp "${abs_srcdir}"/data/SOURCES/hello-1.0.tar.gz "${abs_srcdir}"/data/SOURCES/hello-1.0-modernize.patch ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_debugsource_packages 1" \
-ba "${abs_srcdir}"/data/SPECS/hello2.spec
# Unpack the debugsource rpm so we can check the sources are there.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/hello2-debugsource-1.0-1.*.rpm \
| cpio -diu --quiet
# Check that hello.c is there.
ls ./usr/src/debug/hello2-1.0*/
# The debuginfo package should recommend the debugsource package (ignore arch).
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/hello2-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
],
[0],
[hello.c
Recommends: hello2-debugsource(ignore-arch) = 1.0-1
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debugsource_packages creates -debugsource package
# even if %install changes the working directory (debugsourcefiles.list
# should be in expected build dir).
AT_SETUP([rpmbuild debugsource debugsourcefiles.list path])
AT_KEYWORDS([build] [debuginfo] [debugsource])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_debugsource_packages 1" \
-ba "${abs_srcdir}"/data/SPECS/hello-cd.spec
# Unpack the debuginfo rpms so we can check the sources are there.
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debugsource-1.0-1.*.rpm \
| cpio -diu --quiet
# Check that hello.c is there.
ls ./usr/src/debug/test-1.0*/
],
[0],
[hello.c
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that undefining _debuginfo_subpackages creates one single -debuginfo.
AT_SETUP([rpmbuild debuginfo subpackages single])
AT_KEYWORDS([build] [debuginfo] [debugsubpackage])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--undefine "_unique_debug_names" \
--undefine "_unique_debug_srcs" \
--undefine "_debugsource_packages" \
--undefine "_debuginfo_subpackages" \
-ba "${abs_srcdir}"/data/SPECS/test-subpackages.spec
# Check that there is just one debuginfo package.
ls ${abs_builddir}/testing/build/RPMS/*/*debuginfo*rpm | wc --lines
# Which contains hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello debug exists"
else
echo "No hello: $debug_name"
fi
],
[0],
[1
hello debug exists
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debuginfo_subpackages creates multiple -debuginfos.
AT_SETUP([rpmbuild debuginfo subpackages multiple])
AT_KEYWORDS([build] [debuginfo] [debugsubpackage])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--undefine "_unique_debug_names" \
--undefine "_unique_debug_srcs" \
--undefine "_debugsource_packages" \
--define "_debuginfo_subpackages 1" \
-ba "${abs_srcdir}"/data/SPECS/test-subpackages.spec
# Check that there are 3 debuginfo packages.
ls ${abs_builddir}/testing/build/RPMS/*/*debuginfo*rpm | wc --lines
# First contains hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello debug exists"
else
echo "No hello: $debug_name"
fi
# Second contains hello2.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello2 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello2 debug exists"
else
echo "No hello2: $debug_name"
fi
# No debugsource package, so sources are in the main debuginfo package.
# Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
# Third contains hello3.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test3-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello3 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test3-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello3 debug exists"
else
echo "No hello3: $debug_name"
fi
# No debugsource package, so sources are in the main debuginfo package.
# Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-test3-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
],
[0],
[3
hello debug exists
hello2 debug exists
Recommends: test-debuginfo(ignore-arch) = 1.0-1
hello3 debug exists
Recommends: test-debuginfo(ignore-arch) = 1.0-1
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debuginfo_subpackages creates multiple -debuginfos.
# With unique debug and source names
AT_SETUP([rpmbuild debuginfo subpackages multiple unique])
AT_KEYWORDS([build] [debuginfo] [debugsubpackage])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_unique_debug_names 1" \
--define "_unique_debug_srcs 1" \
--undefine "_debugsource_packages" \
--define "_debuginfo_subpackages 1" \
-ba "${abs_srcdir}"/data/SPECS/test-subpackages.spec
# Check that there are 3 debuginfo packages.
ls ${abs_builddir}/testing/build/RPMS/*/*debuginfo*rpm | wc --lines
# First contains hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello debug exists"
else
echo "No hello: $debug_name"
fi
# Second contains hello2.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello2 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello2 debug exists"
else
echo "No hello2: $debug_name"
fi
# No debugsource package, so sources are in the main debuginfo package.
# Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
# Third contains hello3.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test3-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello3 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test3-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello3 debug exists"
else
echo "No hello3: $debug_name"
fi
# No debugsource package, so sources are in the main debuginfo package.
# Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-test3-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
],
[0],
[3
hello debug exists
hello2 debug exists
Recommends: test-debuginfo(ignore-arch) = 1.0-1
hello3 debug exists
Recommends: test-debuginfo(ignore-arch) = 1.0-1
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debuginfo_subpackages creates multiple -debuginfos.
# Unique with debugsources.
AT_SETUP([rpmbuild debuginfo subpackages multiple unique debugsource])
AT_KEYWORDS([build] [debuginfo] [debugsubpackage] [debugsource])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_unique_debug_names 1" \
--define "_unique_debug_srcs 1" \
--define "_debugsource_packages 1" \
--define "_debuginfo_subpackages 1" \
-ba "${abs_srcdir}"/data/SPECS/test-subpackages.spec
# Check that there are 3 debuginfo packages.
ls ${abs_builddir}/testing/build/RPMS/*/*debuginfo*rpm | wc --lines
# First contains hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello debug exists"
else
echo "No hello: $debug_name"
fi
# Sources are in debugsource package. Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
# Second contains hello2.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello2 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello2 debug exists"
else
echo "No hello2: $debug_name"
fi
# Sources are in debugsource package. Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
# Third contains hello3.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test3-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello3 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test3-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello3 debug exists"
else
echo "No hello3: $debug_name"
fi
# Sources are in debugsource package. Make sure it is recommended.
echo -n "Recommends: "
run rpm -qp --recommends ${abs_builddir}/testing/build/RPMS/*/test-test3-debuginfo-1.0-1.*.rpm | sed -E 's/([[-.a-z0-9]]+)\(.*\) = ([[-.0-9]]+)/\1\(ignore-arch\) = \2/'
],
[0],
[3
hello debug exists
Recommends: test-debugsource(ignore-arch) = 1.0-1
hello2 debug exists
Recommends: test-debugsource(ignore-arch) = 1.0-1
hello3 debug exists
Recommends: test-debugsource(ignore-arch) = 1.0-1
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debuginfo_subpackages works with excluded files.
AT_SETUP([rpmbuild debuginfo subpackages multiple excluded])
AT_KEYWORDS([build] [debuginfo] [debugsubpackage] [debugsource])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_unique_debug_names 1" \
--define "_unique_debug_srcs 1" \
--define "_debugsource_packages 1" \
--define "_debuginfo_subpackages 1" \
-ba "${abs_srcdir}"/data/SPECS/test-subpackages-exclude.spec
# Check that there are 2 debuginfo packages.
ls ${abs_builddir}/testing/build/RPMS/*/*debuginfo*rpm | wc --lines
# First contains hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello debug exists"
else
echo "No hello: $debug_name"
fi
# Second contains hello2.debug but NOT hello3.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello2 | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello2 debug exists"
else
echo "No hello2: $debug_name"
fi
if test -f ./usr/lib/debug/bin/hello3*; then
echo "hello3 debug exists"
else
echo "No hello3 debug"
fi
],
[0],
[2
hello debug exists
hello2 debug exists
No hello3 debug
],
[ignore])
AT_CLEANUP
# ------------------------------
# Check that defining _debuginfo_subpackages works with RemovePathPostfixes.
AT_SETUP([rpmbuild debuginfo subpackages multiple excluded])
AT_KEYWORDS([build] [debuginfo] [debugsubpackage] [debugsource])
AT_CHECK([
rm -rf ${TOPDIR}
AS_MKDIR_P(${TOPDIR}/SOURCES)
# Setup sources
cp "${abs_srcdir}"/data/SOURCES/hello.c ${TOPDIR}/SOURCES
rundebug rpmbuild --quiet \
--define "_unique_debug_names 1" \
--define "_unique_debug_srcs 1" \
--define "_debugsource_packages 1" \
--define "_debuginfo_subpackages 1" \
-ba "${abs_srcdir}"/data/SPECS/test-subpackages-pathpostfixes.spec
# Check that there are 2 debuginfo packages.
ls ${abs_builddir}/testing/build/RPMS/*/*debuginfo*rpm | wc --lines
# First contains hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello debug exists"
else
echo "No hello: $debug_name"
fi
# remove it, we are going to check the other debuginfo package.
rm ./bin/hello
rm ./usr/lib/debug/bin/$debug_name
orig_debugname=$debugname
# Second contains hello.foobar.debug but NOT hello.debug
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-1.0-1.*.rpm \
| cpio -diu --quiet
# Extract the debug name from the exe (.gnu_debuglink section, first string)
debug_name=$(readelf -p .gnu_debuglink ./bin/hello | grep hello | cut -c13-)
rpm2cpio ${abs_builddir}/testing/build/RPMS/*/test-test2-debuginfo-1.0-1.*.rpm \
| cpio -diu --quiet
if test -f ./usr/lib/debug/bin/$debug_name; then
echo "hello.foobar debug exists"
else
echo "No hello2: $debug_name"
fi
if test -f ./usr/lib/debug/bin/$orig_debugname; then
echo "$orig_debugname exists"
else
echo "No hello.debug"
fi
],
[0],
[2
hello debug exists
hello.foobar debug exists
No hello.debug
],
[ignore])
AT_CLEANUP