Any L4 protocol
FalseTeam Advanced OptionsdialogFalsevertical2False6666endgtk-cancelTrueTrueTrueTrueTrueTrue0gtk-okTrueTrueTrueTrueTrueTrue1FalseFalse0TrueTrue6666TrueFalsestart1212121266TrueFalsestart_Peer notification countTruenotify_peers_count100TrueFalsestartPeer _notification intervalTruenotify_peers_interval101TrueFalsestart_Multicast rejoin countTruemcast_rejoin_count102TrueFalsestartMulticast _rejoin intervalTruemcast_rejoin_interval103TrueTrueNumber of bursts of unsolicited NAs and gratuitous ARP packets sent after port is enabled or disabled.Truenotify_peers_count_adjustment10TrueTrueNumber of bursts of multicast group rejoin requests sent after port is enabled or disabled.Truemcast_rejoin_count_adjustment12TrueFalsestartms21TrueFalsestartms23TrueTrueValue is positive number in milliseconds. Specifies an interval between bursts of notify-peer packets.Truenotify_peeers_interval_adjustment11TrueTrueValue is positive number in milliseconds. Specifies an interval between bursts of multicast group rejoin requests.Truemcast_rejoin_interval_adjustment13TrueFalsestart_Hardware AddressTrue104TrueTrueDesired hardware address of new team device. Usual MAC address format is accepted.True14TrueFalseGeneralFalseTrueFalseTrue1212121266TrueTrueFalsestart_RunnerTrueteam_runner100TrueFalsestart_Hardware address policyTruehwaddr_policy101TrueFalseName of runner to be used.Trueteam_runner_model00110TrueFalseThis defines the policy of how hardware addresses of team device and port devices should be set during the team lifetime.hwaddr_policy_model00111Send LACPDU frames _periodicallyTrueTrueFalseIf checked, LACPDU frames are sent along the configured links periodically. If not, it acts as “speak when spoken to”.startTrueTrue082Send a LACPDU frame _every secondTrueTrueFalseOption specifies the rate at which our link partner is asked to transmit LACPDU packets. If checked, packets will be sent once per second. Otherwise they will be sent every 30 seconds.startTrueTrue092TrueFalsestart_System priorityTruesystem_priority102TrueFalsestart_Minimum portsTrueminimum_ports103TrueFalsestart_Aggregator selection policyTrueagg_selection_policy104TrueTrueSystem priority, value can be 0 – 65535.system_priority_adjustment12TrueTrueSpecifies the minimum number of ports that must be active before asserting carrier in the master interface, value can be 1 – 255.minimum_ports_adjustment13TrueFalseThis selects the policy of how the aggregators will be selected.agg_select_policy_model00114TrueFalse65True0in128TrueTrueinTrueTrueList of fragment types (strings) which should be used for packet Tx hash computation.9tx_hash_modelFalseFalseFalsemultiple1TrueFalse_Fields for transmission hashTruetx_hash072TrueTrueIn tenths of a second. Periodic interval between rebalancing.tx_balancing_interval_adjustment16TrueFalseName of active Tx balancer. Active Tx balancing is disabled by default.Truetx_balancer_model00115TrueFalsestartTransmission _balancing intervalTruetx_balancing_interval106TrueFalsestart_Transmission balancerTruetx_balancer1051TrueFalseRunner1FalseTrueFalsestart1212121266TrueFalsestart_Link watcherTruelink_watcher_name100TrueFalsestart_Up delayTruedelay_up101TrueFalsestart_Down delayTruedelay_down102TrueFalsestartSend _intervalTruesend_interval103TrueFalsestartDelay _before first sendTrueinit_wait104TrueFalsestart_Maximum missed repliesTruemissed_max105TrueFalsestart_Source hostTruesource_host106TrueFalsestart_Target hostTruetarget_host107TrueTrueMaximum number of missed replies. If this number is exceeded, link is reported as down.Truemissed_max_adjustment15TrueTrueHostname to be converted to IP address which will be filled into ARP request as source address.True16TrueTrueHostname to be converted to IP address which will be filled into request as destination address.False17Ignore invalid packets from _active portsTrueTrueFalseValidate received ARP packets on active ports. If this is not checked, all incoming ARP packets will be considered as a good reply.startTrueTrue082Ignore invalid packets from i_nactive portsTrueTrueFalseValidate received ARP packets on inactive ports. If this is not checked, all incoming ARP packets will be considered as a good reply.startTrueTrue092S_end on inactive portsTrueTrueFalseBy default, ARP requests are sent on active ports only. This option allows sending even on inactive ports.startTrueTrue0102TrueFalsestartms21TrueFalsestartms22TrueFalsestartms23TrueFalsestartms24TrueTrueThe delay between the link coming up and the runner being notified about it.Truedelay_up_adjustment11TrueTrueThe delay between the link going down and the runner being notified about it.Truedelay_down_adjustment12TrueTrueThe interval between requests being sent.Truesend_interval_adjustment13TrueTrueThe delay between link watch initialization and the first request being sent.Falseinit_wait_adjustment14TrueFalseThe link watcher to be used.Truelink_watch_model001102TrueFalseLink Watcher2FalseTrueFalseTrue1212121286Im_port team configuration from a file…TrueTrueFalseTrueTrue02TrueTruein100TrueTrueTrueTrue01TrueFalseEdit _JSON configurationTrueteam_json_config1003TrueFalseRaw Configuration3FalseTrueTrue1advanced_canceladvanced_ok