/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil ; -*- */
/*
* (C) 2001 by Argonne National Laboratory.
* See COPYRIGHT in top-level directory.
*
*/
#ifndef MPIR_DATATYPE_H_INCLUDED
#define MPIR_DATATYPE_H_INCLUDED
/* This value should be set to greatest value used as the type index suffix in
* the predefined handles. That is, look at the last two hex digits of all
* predefined datatype handles, take the greatest one, and convert it to decimal
* here. */
/* FIXME calculating this value this way is foolish, we should make this more
* automatic and less error prone */
/* FIXME: Given that this is relatively static, an adequate alternative is
to provide a check that this value is valid. */
#define MPIR_DATATYPE_N_BUILTIN 70
#define MPIR_DTYPE_BEGINNING 0
#define MPIR_DTYPE_END -1
#ifndef MPIR_DATATYPE_PREALLOC
#define MPIR_DATATYPE_PREALLOC 8
#endif /* MPIR_DATATYPE_PREALLOC */
/*S
MPIR_Datatype_contents - Holds envelope and contents data for a given
datatype
Notes:
Space is allocated beyond the structure itself in order to hold the
arrays of types, ints, and aints, in that order.
S*/
typedef struct MPIR_Datatype_contents {
int combiner;
int nr_ints;
int nr_aints;
int nr_types;
/* space allocated beyond structure used to store the types[],
* ints[], and aints[], in that order.
*/
} MPIR_Datatype_contents;
/* Datatype Structure */
/*S
MPIR_Datatype - Description of the MPID Datatype structure
Notes:
The 'ref_count' is needed for nonblocking operations such as
.vb
MPI_Type_struct(... , &newtype);
MPI_Irecv(buf, 1000, newtype, ..., &request);
MPI_Type_free(&newtype);
...
MPI_Wait(&request, &status);
.ve
Module:
Datatype-DS
Notes:
Alternatives:
The following alternatives for the layout of this structure were considered.
Most were not chosen because any benefit in performance or memory
efficiency was outweighed by the added complexity of the implementation.
A number of fields contain only boolean inforation ('is_contig',
'has_sticky_ub', 'has_sticky_lb', 'is_permanent', 'is_committed'). These
could be combined and stored in a single bit vector.
'MPI_Type_dup' could be implemented with a shallow copy, where most of the
data fields, would not be copied into the new object created by
'MPI_Type_dup'; instead, the new object could point to the data fields in
the old object. However, this requires more code to make sure that fields
are found in the correct objects and that deleting the old object doesn't
invalidate the dup'ed datatype.
Originally we attempted to keep contents/envelope data in a non-optimized
dataloop. The subarray and darray types were particularly problematic,
and eventually we decided it would be simpler to just keep contents/
envelope data in arrays separately.
Earlier versions of the ADI used a single API to change the 'ref_count',
with each MPI object type having a separate routine. Since reference
count changes are always up or down one, and since all MPI objects
are defined to have the 'ref_count' field in the same place, the current
ADI3 API uses two routines, 'MPIR_Object_add_ref' and
'MPIR_Object_release_ref', to increment and decrement the reference count.
S*/
struct MPIR_Datatype {
/* handle and ref_count are filled in by MPIR_Handle_obj_alloc() */
MPIR_OBJECT_HEADER; /* adds handle and ref_count fields */
/* basic parameters for datatype, accessible via MPI calls */
MPI_Aint size; /* MPI_Count could be 128 bits, so use MPI_Aint */
MPI_Aint extent, ub, lb, true_ub, true_lb;
/* chars affecting subsequent datatype processing and creation */
MPI_Aint alignsize;
int has_sticky_ub, has_sticky_lb;
int is_permanent; /* non-zero if datatype is a predefined type */
int is_committed;
/* element information; used for accumulate and get elements
* basic_type: describes basic type (predefined type). If the
* type is composed of the same basic type, it is
* set to that type, otherwise it is set to MPI_DATATYPE_NULL.
* n_builtin_elements: refers to the number of builtin type elements.
* builtin_element_size: refers to the size of builtin type. If the
* type is composed of the same builtin type,
* it is set to size of that type, otherwise it
* is set to -1.
*/
int basic_type;
MPI_Aint n_builtin_elements;
MPI_Aint builtin_element_size;
/* information on contiguity of type, for processing shortcuts.
*
* is_contig is non-zero only if N instances of the type would be
* contiguous.
*/
int is_contig;
/* Upper bound on the number of contig blocks for one instance.
* It is not trivial to calculate the *real* number of contig
* blocks in the case where old datatype is non-contiguous
*/
MPI_Aint max_contig_blocks;
/* pointer to contents and envelope data for the datatype */
MPIR_Datatype_contents *contents;
/* dataloop members, including a pointer to the loop, the size in bytes,
* and a depth used to verify that we can process it (limited stack depth
*/
struct MPIR_Dataloop *dataloop; /* might be optimized for homogenous */
MPI_Aint dataloop_size;
int dataloop_depth;
/* MPI-2 attributes and name */
struct MPIR_Attribute *attributes;
char name[MPI_MAX_OBJECT_NAME];
/* not yet used; will be used to track what processes have cached
* copies of this type.
*/
int32_t cache_id;
/* MPID_Lpidmask mask; */
/* int (*free_fn)(struct MPIR_Datatype *); *//* Function to free this datatype */
/* Other, device-specific information */
#ifdef MPID_DEV_DATATYPE_DECL
MPID_DEV_DATATYPE_DECL
#endif
};
extern MPIR_Datatype MPIR_Datatype_builtin[MPIR_DATATYPE_N_BUILTIN];
extern MPIR_Datatype MPIR_Datatype_direct[];
extern MPIR_Object_alloc_t MPIR_Datatype_mem;
static inline void MPIR_Datatype_free(MPIR_Datatype * ptr);
#define MPIR_Datatype_ptr_add_ref(datatype_ptr) MPIR_Object_add_ref((datatype_ptr))
/* to be used only after MPIR_Datatype_valid_ptr(); the check on
* err == MPI_SUCCESS ensures that we won't try to dereference the
* pointer if something has already been detected as wrong.
*/
#define MPIR_Datatype_committed_ptr(ptr,err) do { \
if ((err == MPI_SUCCESS) && !((ptr)->is_committed)) \
err = MPIR_Err_create_code(MPI_SUCCESS, \
MPIR_ERR_RECOVERABLE, \
FCNAME, \
__LINE__, \
MPI_ERR_TYPE, \
"**dtypecommit", \
0); \
} while (0)
#define MPIR_Datatype_get_basic_size(a) (((a)&0x0000ff00)>>8)
#define MPIR_Datatype_get_basic_type(a,basic_type_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
basic_type_ = ((MPIR_Datatype *) ptr)->basic_type; \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
basic_type_ = ((MPIR_Datatype *) ptr)->basic_type; \
break; \
case HANDLE_KIND_BUILTIN: \
basic_type_ = a; \
break; \
case HANDLE_KIND_INVALID: \
default: \
basic_type_ = 0; \
break; \
\
} \
/* This macro returns the builtin type, if 'basic_type' is not \
* a builtin type, it must be a pair type composed of different \
* builtin types, so we return MPI_DATATYPE_NULL here. \
*/ \
if (HANDLE_GET_KIND(basic_type_) != HANDLE_KIND_BUILTIN) \
basic_type_ = MPI_DATATYPE_NULL; \
} while (0)
#define MPIR_Datatype_get_ptr(a,ptr) MPIR_Getb_ptr(Datatype,DATATYPE,a,0x000000ff,ptr)
/* Note: Probably there is some clever way to build all of these from a macro.
*/
#define MPIR_Datatype_get_size_macro(a,size_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
size_ = ((MPIR_Datatype *) ptr)->size; \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_Assert(ptr != NULL); \
size_ = ((MPIR_Datatype *) ptr)->size; \
break; \
case HANDLE_KIND_BUILTIN: \
size_ = MPIR_Datatype_get_basic_size(a); \
break; \
case HANDLE_KIND_INVALID: \
default: \
size_ = 0; \
break; \
\
} \
} while (0)
#define MPIR_Datatype_get_extent_macro(a,extent_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
extent_ = ((MPIR_Datatype *) ptr)->extent; \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_Assert(ptr != NULL); \
extent_ = ((MPIR_Datatype *) ptr)->extent; \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
extent_ = MPIR_Datatype_get_basic_size(a); /* same as size */ \
break; \
} \
} while (0)
/* helper macro: takes an MPI_Datatype handle value and returns TRUE in
* (*is_config_) if the type is contiguous */
#define MPIR_Datatype_is_contig(dtype_, is_contig_) \
do { \
if (HANDLE_GET_KIND(dtype_) == HANDLE_KIND_BUILTIN) { \
*(is_contig_) = TRUE; \
} \
else { \
MPIR_Datatype *dtp_ = NULL; \
MPIR_Datatype_get_ptr((dtype_), dtp_); \
MPIR_Assert(dtp_ != NULL); \
*(is_contig_) = dtp_->is_contig; \
} \
} while (0)
/* MPIR_Datatype_ptr_release decrements the reference count on the MPIR_Datatype
* and, if the refct is then zero, frees the MPIR_Datatype and associated
* structures.
*/
#define MPIR_Datatype_ptr_release(datatype_ptr) do { \
int inuse_; \
\
MPIR_Object_release_ref((datatype_ptr),&inuse_); \
if (!inuse_) { \
int lmpi_errno = MPI_SUCCESS; \
if (MPIR_Process.attr_free && datatype_ptr->attributes) { \
lmpi_errno = MPIR_Process.attr_free(datatype_ptr->handle, \
&datatype_ptr->attributes); \
} \
/* LEAVE THIS COMMENTED OUT UNTIL WE HAVE SOME USE FOR THE FREE_FN \
if (datatype_ptr->free_fn) { \
mpi_errno = (datatype_ptr->free_fn)(datatype_ptr); \
if (mpi_errno) { \
MPIR_FUNC_TERSE_EXIT(MPID_STATE_MPI_TYPE_FREE); \
return MPIR_Err_return_comm(0, FCNAME, mpi_errno); \
} \
} */ \
if (lmpi_errno == MPI_SUCCESS) { \
MPIR_Datatype_free(datatype_ptr); \
} \
} \
} while (0)
/* helper macro: takes an MPI_Datatype handle value and returns true_lb in
* (*true_lb_) */
#define MPIR_Datatype_get_true_lb(dtype_, true_lb_) \
do { \
if (HANDLE_GET_KIND(dtype_) == HANDLE_KIND_BUILTIN) { \
*(true_lb_) = 0; \
} \
else { \
MPIR_Datatype *dtp_ = NULL; \
MPIR_Datatype_get_ptr((dtype_), dtp_); \
*(true_lb_) = dtp_->true_lb; \
} \
} while (0)
#define MPIR_Datatype_valid_ptr(ptr,err) MPIR_Valid_ptr_class(Datatype,ptr,MPI_ERR_TYPE,err)
#define MPIR_Datatype_get_loopdepth_macro(a,depth_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
MPIR_DATALOOP_GET_FIELD(depth_,_depth); \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_DATALOOP_GET_FIELD(depth_,_depth); \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
depth_ = 0; \
break; \
} \
} while (0)
#define MPIR_Datatype_get_loopptr_macro(a,lptr_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
MPIR_DATALOOP_GET_FIELD(lptr_,); \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_DATALOOP_GET_FIELD(lptr_,); \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
lptr_ = 0; \
break; \
} \
} while (0)
#define MPIR_Datatype_get_loopsize_macro(a,depth_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC) ; \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
MPIR_DATALOOP_GET_FIELD(depth_,_size); \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_DATALOOP_GET_FIELD(depth_,_size); \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
depth_ = 0; \
break; \
} \
} while (0)
#define MPIR_Datatype_set_loopdepth_macro(a,depth_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
MPIR_DATALOOP_SET_FIELD(depth_,_depth); \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_DATALOOP_SET_FIELD(depth_,_depth); \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
depth_ = 0; \
break; \
} \
} while (0)
#define MPIR_Datatype_set_loopptr_macro(a,lptr_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
MPIR_DATALOOP_SET_FIELD(lptr_,); \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_DATALOOP_SET_FIELD(lptr_,); \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
lptr_ = 0; \
break; \
} \
} while (0)
#define MPIR_Datatype_set_loopsize_macro(a,depth_) do { \
void *ptr; \
switch (HANDLE_GET_KIND(a)) { \
case HANDLE_KIND_DIRECT: \
MPIR_Assert(HANDLE_INDEX(a) < MPIR_DATATYPE_PREALLOC); \
ptr = MPIR_Datatype_direct+HANDLE_INDEX(a); \
MPIR_DATALOOP_SET_FIELD(depth_,_size); \
break; \
case HANDLE_KIND_INDIRECT: \
ptr = ((MPIR_Datatype *) \
MPIR_Handle_get_ptr_indirect(a,&MPIR_Datatype_mem)); \
MPIR_DATALOOP_SET_FIELD(depth_,_size); \
break; \
case HANDLE_KIND_INVALID: \
case HANDLE_KIND_BUILTIN: \
default: \
depth_ = 0; \
break; \
} \
} while (0)
/* we pessimistically assume that MPI_DATATYPE_NULL may be passed as a "valid" type
* for send/recv when MPI_PROC_NULL is the destination/src */
#define MPIR_Datatype_add_ref_if_not_builtin(datatype_) \
do { \
if ((datatype_) != MPI_DATATYPE_NULL && \
HANDLE_GET_KIND((datatype_)) != HANDLE_KIND_BUILTIN) \
{ \
MPIR_Datatype *dtp_ = NULL; \
MPIR_Datatype_get_ptr((datatype_), dtp_); \
MPIR_Assert(dtp_ != NULL); \
MPIR_Datatype_ptr_add_ref(dtp_); \
} \
} while (0)
#define MPIR_Datatype_release_if_not_builtin(datatype_) \
do { \
if ((datatype_) != MPI_DATATYPE_NULL && \
HANDLE_GET_KIND((datatype_)) != HANDLE_KIND_BUILTIN) \
{ \
MPIR_Datatype *dtp_ = NULL; \
MPIR_Datatype_get_ptr((datatype_), dtp_); \
MPIR_Assert(dtp_ != NULL); \
MPIR_Datatype_ptr_release(dtp_); \
} \
} while (0)
static inline void MPIR_Datatype_free_contents(MPIR_Datatype * dtp)
{
int i, struct_sz = sizeof(MPIR_Datatype_contents);
int align_sz = 8, epsilon;
MPIR_Datatype *old_dtp;
MPI_Datatype *array_of_types;
if ((epsilon = struct_sz % align_sz)) {
struct_sz += align_sz - epsilon;
}
/* note: relies on types being first after structure */
array_of_types = (MPI_Datatype *) ((char *) dtp->contents + struct_sz);
for (i = 0; i < dtp->contents->nr_types; i++) {
if (HANDLE_GET_KIND(array_of_types[i]) != HANDLE_KIND_BUILTIN) {
MPIR_Datatype_get_ptr(array_of_types[i], old_dtp);
MPIR_Datatype_ptr_release(old_dtp);
}
}
MPL_free(dtp->contents);
dtp->contents = NULL;
}
/*@
MPIR_Datatype_free
Input Parameters:
. MPIR_Datatype ptr - pointer to MPID datatype structure that is no longer
referenced
Output Parameters:
none
Return Value:
none
This function handles freeing dynamically allocated memory associated with
the datatype. In the process MPIR_Datatype_free_contents() is also called,
which handles decrementing reference counts to constituent types (in
addition to freeing the space used for contents information).
MPIR_Datatype_free_contents() will call MPIR_Datatype_free() on constituent
types that are no longer referenced as well.
@*/
static inline void MPIR_Datatype_free(MPIR_Datatype * ptr)
{
MPL_DBG_MSG_P(MPIR_DBG_DATATYPE, VERBOSE, "type %x freed.", ptr->handle);
#ifdef MPID_Type_free_hook
MPID_Type_free_hook(ptr);
#endif /* MPID_Type_free_hook */
/* before freeing the contents, check whether the pointer is not
* null because it is null in the case of a datatype shipped to the target
* for RMA ops */
if (ptr->contents) {
MPIR_Datatype_free_contents(ptr);
}
if (ptr->dataloop) {
MPIR_Dataloop_free(&(ptr->dataloop));
}
MPIR_Handle_obj_free(&MPIR_Datatype_mem, ptr);
}
/*@
MPIR_Datatype_set_contents - store contents information for use in
MPI_Type_get_contents.
Returns MPI_SUCCESS on success, MPI error code on error.
@*/
static inline int MPIR_Datatype_set_contents(MPIR_Datatype * new_dtp,
int combiner,
int nr_ints,
int nr_aints,
int nr_types,
int array_of_ints[],
const MPI_Aint array_of_aints[],
const MPI_Datatype array_of_types[])
{
int i, contents_size, align_sz, epsilon, mpi_errno;
int struct_sz, ints_sz, aints_sz, types_sz;
MPIR_Datatype_contents *cp;
MPIR_Datatype *old_dtp;
char *ptr;
#ifdef HAVE_MAX_STRUCT_ALIGNMENT
align_sz = HAVE_MAX_STRUCT_ALIGNMENT;
#else
align_sz = 8;
#endif
struct_sz = sizeof(MPIR_Datatype_contents);
types_sz = nr_types * sizeof(MPI_Datatype);
ints_sz = nr_ints * sizeof(int);
aints_sz = nr_aints * sizeof(MPI_Aint);
/* pad the struct, types, and ints before we allocate.
*
* note: it's not necessary that we pad the aints,
* because they are last in the region.
*/
if ((epsilon = struct_sz % align_sz)) {
struct_sz += align_sz - epsilon;
}
if ((epsilon = types_sz % align_sz)) {
types_sz += align_sz - epsilon;
}
if ((epsilon = ints_sz % align_sz)) {
ints_sz += align_sz - epsilon;
}
contents_size = struct_sz + types_sz + ints_sz + aints_sz;
cp = (MPIR_Datatype_contents *) MPL_malloc(contents_size, MPL_MEM_DATATYPE);
/* --BEGIN ERROR HANDLING-- */
if (cp == NULL) {
mpi_errno = MPIR_Err_create_code(MPI_SUCCESS,
MPIR_ERR_RECOVERABLE,
"MPIR_Datatype_set_contents",
__LINE__, MPI_ERR_OTHER, "**nomem", 0);
return mpi_errno;
}
/* --END ERROR HANDLING-- */
cp->combiner = combiner;
cp->nr_ints = nr_ints;
cp->nr_aints = nr_aints;
cp->nr_types = nr_types;
/* arrays are stored in the following order: types, ints, aints,
* following the structure itself.
*/
ptr = ((char *) cp) + struct_sz;
/* Fortran90 combiner types do not have a "base" type */
if (nr_types > 0) {
MPIR_Memcpy(ptr, array_of_types, nr_types * sizeof(MPI_Datatype));
}
ptr = ((char *) cp) + struct_sz + types_sz;
if (nr_ints > 0) {
MPIR_Memcpy(ptr, array_of_ints, nr_ints * sizeof(int));
}
ptr = ((char *) cp) + struct_sz + types_sz + ints_sz;
if (nr_aints > 0) {
MPIR_Memcpy(ptr, array_of_aints, nr_aints * sizeof(MPI_Aint));
}
new_dtp->contents = cp;
/* increment reference counts on all the derived types used here */
for (i = 0; i < nr_types; i++) {
if (HANDLE_GET_KIND(array_of_types[i]) != HANDLE_KIND_BUILTIN) {
MPIR_Datatype_get_ptr(array_of_types[i], old_dtp);
MPIR_Datatype_ptr_add_ref(old_dtp);
}
}
return MPI_SUCCESS;
}
/* contents accessor functions */
void MPIR_Type_access_contents(MPI_Datatype type, int **ints_p, MPI_Aint ** aints_p,
MPI_Datatype ** types_p);
void MPIR_Type_release_contents(MPI_Datatype type, int **ints_p, MPI_Aint ** aints_p,
MPI_Datatype ** types_p);
/* This routine is used to install an attribute free routine for datatypes
at finalize-time */
void MPII_Datatype_attr_finalize(void);
int MPII_Type_zerolen(MPI_Datatype * newtype);
#define MPIR_DATATYPE_IS_PREDEFINED(type) \
((HANDLE_GET_KIND(type) == HANDLE_KIND_BUILTIN) || \
(type == MPI_FLOAT_INT) || (type == MPI_DOUBLE_INT) || \
(type == MPI_LONG_INT) || (type == MPI_SHORT_INT) || \
(type == MPI_LONG_DOUBLE_INT))
int MPIR_Get_elements_x_impl(MPI_Count * bytes, MPI_Datatype datatype, MPI_Count * elements);
int MPIR_Status_set_elements_x_impl(MPI_Status * status, MPI_Datatype datatype, MPI_Count count);
void MPIR_Type_get_extent_x_impl(MPI_Datatype datatype, MPI_Count * lb, MPI_Count * extent);
void MPIR_Type_get_true_extent_x_impl(MPI_Datatype datatype, MPI_Count * true_lb,
MPI_Count * true_extent);
int MPIR_Type_size_x_impl(MPI_Datatype datatype, MPI_Count * size);
void MPIR_Get_count_impl(const MPI_Status * status, MPI_Datatype datatype, MPI_Aint * count);
int MPIR_Type_commit_impl(MPI_Datatype * datatype);
int MPIR_Type_create_struct_impl(int count,
const int array_of_blocklengths[],
const MPI_Aint array_of_displacements[],
const MPI_Datatype array_of_types[], MPI_Datatype * newtype);
int MPIR_Type_create_indexed_block_impl(int count,
int blocklength,
const int array_of_displacements[],
MPI_Datatype oldtype, MPI_Datatype * newtype);
int MPIR_Type_create_hindexed_block_impl(int count, int blocklength,
const MPI_Aint array_of_displacements[],
MPI_Datatype oldtype, MPI_Datatype * newtype);
int MPIR_Type_contiguous_impl(int count, MPI_Datatype old_type, MPI_Datatype * new_type_p);
int MPIR_Type_contiguous_x_impl(MPI_Count count, MPI_Datatype old_type, MPI_Datatype * new_type_p);
void MPIR_Type_get_extent_impl(MPI_Datatype datatype, MPI_Aint * lb, MPI_Aint * extent);
void MPIR_Type_get_true_extent_impl(MPI_Datatype datatype, MPI_Aint * true_lb,
MPI_Aint * true_extent);
void MPIR_Type_get_envelope(MPI_Datatype datatype, int *num_integers, int *num_addresses,
int *num_datatypes, int *combiner);
int MPIR_Type_hvector_impl(int count, int blocklen, MPI_Aint stride, MPI_Datatype old_type,
MPI_Datatype * newtype_p);
int MPIR_Type_indexed_impl(int count, const int blocklens[], const int indices[],
MPI_Datatype old_type, MPI_Datatype * newtype);
void MPIR_Type_free_impl(MPI_Datatype * datatype);
int MPIR_Type_vector_impl(int count, int blocklength, int stride, MPI_Datatype old_type,
MPI_Datatype * newtype_p);
int MPIR_Type_struct_impl(int count, const int blocklens[], const MPI_Aint indices[],
const MPI_Datatype old_types[], MPI_Datatype * newtype);
int MPIR_Pack_impl(const void *inbuf, MPI_Aint incount, MPI_Datatype datatype, void *outbuf,
MPI_Aint outcount, MPI_Aint * position);
void MPIR_Pack_size_impl(int incount, MPI_Datatype datatype, MPI_Aint * size);
int MPIR_Unpack_impl(const void *inbuf, MPI_Aint insize, MPI_Aint * position,
void *outbuf, int outcount, MPI_Datatype datatype);
void MPIR_Type_lb_impl(MPI_Datatype datatype, MPI_Aint * displacement);
/* Datatype functions */
int MPIR_Type_dup(MPI_Datatype oldtype, MPI_Datatype * newtype);
int MPIR_Type_struct(int count, const int *blocklength_array, const MPI_Aint * displacement_array,
const MPI_Datatype * oldtype_array, MPI_Datatype * newtype);
int MPIR_Type_indexed(int count, const int *blocklength_array, const void *displacement_array,
int dispinbytes, MPI_Datatype oldtype, MPI_Datatype * newtype);
int MPIR_Type_vector(int count, int blocklength, MPI_Aint stride, int strideinbytes,
MPI_Datatype oldtype, MPI_Datatype * newtype);
int MPIR_Type_contiguous(int count, MPI_Datatype oldtype, MPI_Datatype * newtype);
int MPII_Type_zerolen(MPI_Datatype * newtype);
int MPIR_Type_create_resized(MPI_Datatype oldtype, MPI_Aint lb, MPI_Aint extent,
MPI_Datatype * newtype);
int MPIR_Type_get_contents(MPI_Datatype datatype, int max_integers, int max_addresses,
int max_datatypes, int array_of_integers[],
MPI_Aint array_of_addresses[], MPI_Datatype array_of_datatypes[]);
int MPIR_Type_create_pairtype(MPI_Datatype datatype, MPIR_Datatype * new_dtp);
int MPIR_Type_flatten(MPI_Datatype type, MPI_Aint * off_array, DLOOP_Size * size_array,
MPI_Aint * array_len_p);
/* debugging helper functions */
char *MPIR_Datatype_builtin_to_string(MPI_Datatype type);
char *MPIR_Datatype_combiner_to_string(int combiner);
void MPIR_Datatype_debug(MPI_Datatype type, int array_ct);
MPI_Aint MPII_Datatype_get_basic_size_external32(MPI_Datatype el_type);
static inline MPI_Aint MPIR_Datatype_size_external32(MPI_Datatype type)
{
if (HANDLE_GET_KIND(type) == HANDLE_KIND_BUILTIN) {
return MPII_Datatype_get_basic_size_external32(type);
} else {
MPIR_Dataloop *dlp = NULL;
MPIR_Datatype_get_loopptr_macro(type, dlp);
MPIR_Assert(dlp != NULL);
return MPIR_Dataloop_stream_size(dlp, MPII_Datatype_get_basic_size_external32);
}
}
#endif /* MPIR_DATATYPE_H_INCLUDED */