# Example configuration for the SuperMicro X7SBi. Contributed by Joe Ogulin.

# Monitoring hardware on this board: Winbond W83793G on ICH9 SMBus (driver

# w83793) and integrated sensors in the CPU (driver coretemp). A few voltages

# also available from the Winbond W83627HF Super-I/O chip.

# settings for the supermicro X7SBi

#

chip "w83793-*"

# 0x10, CPU Core

    label in0 "CPU Core"

# 0x11, unconnected according to support, 1.5V in BIOS ?

    label in1 "+1.5V"

    set in1_min 1.5*0.95

    set in1_max 1.5*1.05

# 0x12, unconnected according to support, VTT=1.2V in BIOS ?

    label in2 "VTT"

    set in2_min 1.2*0.95

    set in2_max 1.2*1.05

# 0x14, -12V

    label in3 "-12V"

#    From Supermicro support information...

#    compute in3 (((@/8)*18500)/256)-16, (((@+16)*256)/18500)*8

#    ... but this from Jean Delvare works better in pratice

    compute in3 (@ * 5.14) - 14.91, (@ + 14.91) / 5.14

    set in3_min -12*1.05

    set in3_max -12*0.95

# 0x15, DIMM

    label in4 "DIMM"

# 0x16, +3.3V

    label in5 "+3.3V"

    set in5_min 3.3*0.95

    set in5_max 3.3*1.05

# 0x17, +12V

    label in6 "+12V"

    compute in6 @*12,@/12

    set in6_min 12*0.95

    set in6_max 12*1.05

# Ox18, +5V

    label in7 "+5V"

    compute in7 @-0.15,@+0.15

    set in7_min 5*0.95

    set in7_max 5*1.05

# 0x19, 5VSB

    label in8 "5VSB"

    compute in8 @-0.15,@+0.15

    set in8_min 5*0.95

    set in8_max 5*1.05

# 0x1a, Battery Voltage

    label in9 "VBAT"

    label temp1 "CPU Temp"

    ignore temp2

    ignore temp3

    ignore temp4

    ignore temp5

    label temp6 "Sys Temp"

# 3 connected

# note that these fan labels are for a 1U rackmount and are given their

# positions based on where they are when you look at it from the front

# towards the back

#

# relabel them as necessary to however you have them set up

    label fan1 "Right Fan"

    ignore fan2

    ignore fan3

    ignore fan4

    label fan5 "Mid-right Fan"

    ignore fan6

    label fan7 "Middle Fan"

    ignore fan8

    ignore fan9

    ignore fan10

    ignore fan12

    ignore fan12

    # Override CPU temperature threshold

    set temp1_max       80

    set temp1_max_hyst  70

    set temp6_max       60

    set temp6_max_hyst  55

# NOTE: nearly everything on this chip is not used you can turn on alarms, if

# you have the appropriate setup for it and want to have chassis intrusion

# detection turned on

chip "w83627hf-*"

    ignore in0

    ignore in1

    ignore in2

    label in3 "+5.0V"

    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)

    ignore in4

    ignore in5

    ignore in6

    ignore in7

    ignore in8

    ignore fan1

    ignore fan2

    ignore fan3

    ignore alarms

    ignore temp1

    ignore temp2

    ignore temp3