IPMROUTE-STD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, mib-2, Integer32, Counter32, Counter64, Gauge32, IpAddress, TimeTicks FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB IANAipRouteProtocol, IANAipMRouteProtocol FROM IANA-RTPROTO-MIB; ipMRouteStdMIB MODULE-IDENTITY LAST-UPDATED "200009220000Z" -- September 22, 2000 ORGANIZATION "IETF IDMR Working Group" CONTACT-INFO " Dave Thaler Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 US Phone: +1 425 703 8835 EMail: dthaler@microsoft.com" DESCRIPTION "The MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use." REVISION "200009220000Z" -- September 22, 2000 DESCRIPTION "Initial version, published as RFC 2932." ::= { mib-2 83 } -- Textual Conventions LanguageTag ::= TEXTUAL-CONVENTION DISPLAY-HINT "100a" STATUS current DESCRIPTION "An RFC 1766-style language tag, with all alphabetic characters converted to lowercase. This restriction is intended to make the lexical ordering imposed by SNMP useful when applied to language tags. Note that it is theoretically possible for a valid language tag to exceed the allowed length of this syntax, and thus be impossible to represent with this syntax. Sampling of language tags in current use on the Internet suggests that this limit does not pose a serious problem in practice." SYNTAX OCTET STRING (SIZE (1..100)) -- Top-level structure of the MIB ipMRouteMIBObjects OBJECT IDENTIFIER ::= { ipMRouteStdMIB 1 } ipMRoute OBJECT IDENTIFIER ::= { ipMRouteMIBObjects 1 } -- the IP Multicast Routing MIB-Group -- -- a collection of objects providing information about -- IP Multicast Groups ipMRouteEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled status of IP Multicast routing on this router." ::= { ipMRoute 1 } ipMRouteEntryCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rows in the ipMRouteTable. This can be used to monitor the multicast routing table size." ::= { ipMRoute 7 } ipMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router." ::= { ipMRoute 2 } ipMRouteEntry OBJECT-TYPE SYNTAX IpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast group address. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime." INDEX { ipMRouteGroup, ipMRouteSource, ipMRouteSourceMask } ::= { ipMRouteTable 1 } IpMRouteEntry ::= SEQUENCE { ipMRouteGroup IpAddress, ipMRouteSource IpAddress, ipMRouteSourceMask IpAddress, ipMRouteUpstreamNeighbor IpAddress, ipMRouteInIfIndex InterfaceIndexOrZero, ipMRouteUpTime TimeTicks, ipMRouteExpiryTime TimeTicks, ipMRoutePkts Counter32, ipMRouteDifferentInIfPackets Counter32, ipMRouteOctets Counter32, ipMRouteProtocol IANAipMRouteProtocol, ipMRouteRtProto IANAipRouteProtocol, ipMRouteRtAddress IpAddress, ipMRouteRtMask IpAddress, ipMRouteRtType INTEGER, ipMRouteHCOctets Counter64 } ipMRouteGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains multicast routing information." ::= { ipMRouteEntry 1 } ipMRouteSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information." ::= { ipMRouteEntry 2 } ipMRouteSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information." ::= { ipMRouteEntry 3 } ipMRouteUpstreamNeighbor OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received, or 0.0.0.0 if the upstream neighbor is unknown (e.g., in CBT)." ::= { ipMRouteEntry 4 } ipMRouteInIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may be accepted on multiple interfaces (e.g., in CBT)." ::= { ipMRouteEntry 5 } ipMRouteUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { ipMRouteEntry 6 } ipMRouteExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging." ::= { ipMRouteEntry 7 } ipMRoutePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address." ::= { ipMRouteEntry 8 } ipMRouteDifferentInIfPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address, which were dropped because they were not received on the interface indicated by ipMRouteInIfIndex. Packets which are not subject to an incoming interface check (e.g., using CBT) are not counted." ::= { ipMRouteEntry 9 } ipMRouteOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router." ::= { ipMRouteEntry 10 } ipMRouteProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast routing protocol via which this multicast forwarding entry was learned." ::= { ipMRouteEntry 11 } ipMRouteRtProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which the route used to find the upstream or parent interface for this multicast forwarding entry was learned. Inclusion of values for routing protocols is not intended to imply that those protocols need be supported." ::= { ipMRouteEntry 12 } ipMRouteRtAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address portion of the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { ipMRouteEntry 13 } ipMRouteRtMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mask associated with the route used to find the upstream or parent interface for this multicast forwarding entry." ::= { ipMRouteEntry 14 } ipMRouteRtType OBJECT-TYPE SYNTAX INTEGER { unicast (1), -- Unicast route used in multicast RIB multicast (2) -- Multicast route } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason the given route was placed in the (logical) multicast Routing Information Base (RIB). A value of unicast means that the route would normally be placed only in the unicast RIB, but was placed in the multicast RIB (instead or in addition) due to local configuration, such as when running PIM over RIP. A value of multicast means that the route was explicitly added to the multicast RIB by the routing protocol, such as DVMRP or Multiprotocol BGP." ::= { ipMRouteEntry 15 } ipMRouteHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router. This object is a 64-bit version of ipMRouteOctets." ::= { ipMRouteEntry 16 } -- -- The IP Multicast Routing Next Hop Table -- ipMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on the next- hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next-hops on outgoing interfaces for particular sources sending to a particular multicast group address." ::= { ipMRoute 3 } ipMRouteNextHopEntry OBJECT-TYPE SYNTAX IpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the list of next-hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group address are routed. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime." INDEX { ipMRouteNextHopGroup, ipMRouteNextHopSource, ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex, ipMRouteNextHopAddress } ::= { ipMRouteNextHopTable 1 } IpMRouteNextHopEntry ::= SEQUENCE { ipMRouteNextHopGroup IpAddress, ipMRouteNextHopSource IpAddress, ipMRouteNextHopSourceMask IpAddress, ipMRouteNextHopIfIndex InterfaceIndex, ipMRouteNextHopAddress IpAddress, ipMRouteNextHopState INTEGER, ipMRouteNextHopUpTime TimeTicks, ipMRouteNextHopExpiryTime TimeTicks, ipMRouteNextHopClosestMemberHops Integer32, ipMRouteNextHopProtocol IANAipMRouteProtocol, ipMRouteNextHopPkts Counter32 } ipMRouteNextHopGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group for which this entry specifies a next-hop on an outgoing interface." ::= { ipMRouteNextHopEntry 1 } ipMRouteNextHopSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next-hop on an outgoing interface." ::= { ipMRouteNextHopEntry 2 } ipMRouteNextHopSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next-hop on an outgoing interface." ::= { ipMRouteNextHopEntry 3 } ipMRouteNextHopIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for the outgoing interface for this next-hop." ::= { ipMRouteNextHopEntry 4 } ipMRouteNextHopAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next-hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple next-hop addresses out a single outgoing interface." ::= { ipMRouteNextHopEntry 5 } ipMRouteNextHopState OBJECT-TYPE SYNTAX INTEGER { pruned(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' indicates it is not." ::= { ipMRouteNextHopEntry 6 } ipMRouteNextHopUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { ipMRouteNextHopEntry 7 } ipMRouteNextHopExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out. If ipMRouteNextHopState is pruned(1), the remaining time until the prune expires and the state reverts to forwarding(2). Otherwise, the remaining time until this entry is removed from the table. The time remaining may be copied from ipMRouteExpiryTime if the protocol in use for this entry does not specify next-hop timers. The value 0 indicates that the entry is not subject to aging." ::= { ipMRouteNextHopEntry 8 } ipMRouteNextHopClosestMemberHops OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of hops between this router and any member of this IP multicast group reached via this next-hop on this outgoing interface. Any IP multicast datagrams for the group which have a TTL less than this number of hops will not be forwarded to this next-hop." ::= { ipMRouteNextHopEntry 9 } ipMRouteNextHopProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this next-hop was learned." ::= { ipMRouteNextHopEntry 10 } ipMRouteNextHopPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which have been forwarded using this route." ::= { ipMRouteNextHopEntry 11 } -- -- The Multicast Routing Interface Table -- ipMRouteInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information specific to interfaces." ::= { ipMRoute 4 } ipMRouteInterfaceEntry OBJECT-TYPE SYNTAX IpMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for a particular interface." INDEX { ipMRouteInterfaceIfIndex } ::= { ipMRouteInterfaceTable 1 } IpMRouteInterfaceEntry ::= SEQUENCE { ipMRouteInterfaceIfIndex InterfaceIndex, ipMRouteInterfaceTtl Integer32, ipMRouteInterfaceProtocol IANAipMRouteProtocol, ipMRouteInterfaceRateLimit Integer32, ipMRouteInterfaceInMcastOctets Counter32, ipMRouteInterfaceOutMcastOctets Counter32, ipMRouteInterfaceHCInMcastOctets Counter64, ipMRouteInterfaceHCOutMcastOctets Counter64 } ipMRouteInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which this entry contains information." ::= { ipMRouteInterfaceEntry 1 } ipMRouteInterfaceTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface." ::= { ipMRouteInterfaceEntry 2 } ipMRouteInterfaceProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing protocol running on this interface." ::= { ipMRouteInterfaceEntry 3 } ipMRouteInterfaceRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done." DEFVAL { 0 } ::= { ipMRouteInterfaceEntry 4 } ipMRouteInterfaceInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfaces MIB, except that only multicast packets are counted." ::= { ipMRouteInterfaceEntry 5 } ipMRouteInterfaceOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface." ::= { ipMRouteInterfaceEntry 6 } ipMRouteInterfaceHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is a 64-bit version of ipMRouteInterfaceInMcastOctets. It is similar to ifHCInOctets in the Interfaces MIB, except that only multicast packets are counted." ::= { ipMRouteInterfaceEntry 7 } ipMRouteInterfaceHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of ipMRouteInterfaceOutMcastOctets." ::= { ipMRouteInterfaceEntry 8 } -- -- The IP Multicast Scope Boundary Table -- ipMRouteBoundaryTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteBoundaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's scoped multicast address boundaries." ::= { ipMRoute 5 } ipMRouteBoundaryEntry OBJECT-TYPE SYNTAX IpMRouteBoundaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the ipMRouteBoundaryTable representing a scoped boundary." INDEX { ipMRouteBoundaryIfIndex, ipMRouteBoundaryAddress, ipMRouteBoundaryAddressMask } ::= { ipMRouteBoundaryTable 1 } IpMRouteBoundaryEntry ::= SEQUENCE { ipMRouteBoundaryIfIndex InterfaceIndex, ipMRouteBoundaryAddress IpAddress, ipMRouteBoundaryAddressMask IpAddress, ipMRouteBoundaryStatus RowStatus } ipMRouteBoundaryIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IfIndex value for the interface to which this boundary applies. Packets with a destination address in the associated address/mask range will not be forwarded out this interface." ::= { ipMRouteBoundaryEntry 1 } ipMRouteBoundaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address which when combined with the corresponding value of ipMRouteBoundaryAddressMask identifies the group range for which the scoped boundary exists. Scoped addresses must come from the range 239.x.x.x as specified in RFC 2365." ::= { ipMRouteBoundaryEntry 2 } ipMRouteBoundaryAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address mask which when combined with the corresponding value of ipMRouteBoundaryAddress identifies the group range for which the scoped boundary exists." ::= { ipMRouteBoundaryEntry 3 } ipMRouteBoundaryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { ipMRouteBoundaryEntry 4 } -- -- The IP Multicast Scope Name Table -- ipMRouteScopeNameTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteScopeNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the multicast scope names." ::= { ipMRoute 6 } ipMRouteScopeNameEntry OBJECT-TYPE SYNTAX IpMRouteScopeNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the ipMRouteScopeNameTable representing a multicast scope name." INDEX { ipMRouteScopeNameAddress, ipMRouteScopeNameAddressMask, IMPLIED ipMRouteScopeNameLanguage } ::= { ipMRouteScopeNameTable 1 } IpMRouteScopeNameEntry ::= SEQUENCE { ipMRouteScopeNameAddress IpAddress, ipMRouteScopeNameAddressMask IpAddress, ipMRouteScopeNameLanguage LanguageTag, ipMRouteScopeNameString SnmpAdminString, ipMRouteScopeNameDefault TruthValue, ipMRouteScopeNameStatus RowStatus } ipMRouteScopeNameAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address which when combined with the corresponding value of ipMRouteScopeNameAddressMask identifies the group range associated with the multicast scope. Scoped addresses must come from the range 239.x.x.x." ::= { ipMRouteScopeNameEntry 1 } ipMRouteScopeNameAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address mask which when combined with the corresponding value of ipMRouteScopeNameAddress identifies the group range associated with the multicast scope." ::= { ipMRouteScopeNameEntry 2 } ipMRouteScopeNameLanguage OBJECT-TYPE SYNTAX LanguageTag MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RFC 1766-style language tag associated with the scope name." ::= { ipMRouteScopeNameEntry 3 } ipMRouteScopeNameString OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The textual name associated with the multicast scope. The value of this object should be suitable for displaying to end-users, such as when allocating a multicast address in this scope. When no name is specified, the default value of this object should be the string 239.x.x.x/y with x and y replaced appropriately to describe the address and mask length associated with the scope." ::= { ipMRouteScopeNameEntry 4 } ipMRouteScopeNameDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, indicates a preference that the name in the following language should be used by applications if no name is available in a desired language." DEFVAL { false } ::= { ipMRouteScopeNameEntry 5 } ipMRouteScopeNameStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { ipMRouteScopeNameEntry 6 } -- conformance information ipMRouteMIBConformance OBJECT IDENTIFIER ::= { ipMRouteStdMIB 2 } ipMRouteMIBCompliances OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 1 } ipMRouteMIBGroups OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 2 } -- compliance statements ipMRouteMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the IP Multicast MIB." MODULE -- this module MANDATORY-GROUPS { ipMRouteMIBBasicGroup, ipMRouteMIBRouteGroup} GROUP ipMRouteMIBBoundaryGroup DESCRIPTION "This group is mandatory if the router supports administratively-scoped multicast address boundaries." OBJECT ipMRouteBoundaryStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ipMRouteScopeNameStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP ipMRouteMIBHCInterfaceGroup DESCRIPTION "This group is mandatory only for those network interfaces for which the value of the corresponding instance of ifSpeed is greater than 20,000,000 bits/second." ::= { ipMRouteMIBCompliances 1 } -- units of conformance ipMRouteMIBBasicGroup OBJECT-GROUP OBJECTS { ipMRouteEnable, ipMRouteEntryCount, ipMRouteUpstreamNeighbor, ipMRouteInIfIndex, ipMRouteUpTime, ipMRouteExpiryTime, ipMRouteNextHopState, ipMRouteNextHopUpTime, ipMRouteNextHopExpiryTime, ipMRouteNextHopProtocol, ipMRouteNextHopPkts, ipMRouteInterfaceTtl, ipMRouteInterfaceProtocol, ipMRouteInterfaceRateLimit, ipMRouteInterfaceInMcastOctets, ipMRouteInterfaceOutMcastOctets, ipMRouteProtocol } STATUS current DESCRIPTION "A collection of objects to support basic management of IP Multicast routing." ::= { ipMRouteMIBGroups 1 } ipMRouteMIBHopCountGroup OBJECT-GROUP OBJECTS { ipMRouteNextHopClosestMemberHops } STATUS current DESCRIPTION "A collection of objects to support management of the use of hop counts in IP Multicast routing." ::= { ipMRouteMIBGroups 2 } ipMRouteMIBBoundaryGroup OBJECT-GROUP OBJECTS { ipMRouteBoundaryStatus, ipMRouteScopeNameString, ipMRouteScopeNameDefault, ipMRouteScopeNameStatus } STATUS current DESCRIPTION "A collection of objects to support management of scoped multicast address boundaries." ::= { ipMRouteMIBGroups 3 } ipMRouteMIBPktsOutGroup OBJECT-GROUP OBJECTS { ipMRouteNextHopPkts } STATUS current DESCRIPTION "A collection of objects to support management of packet counters for each outgoing interface entry of a route." ::= { ipMRouteMIBGroups 4 } ipMRouteMIBHCInterfaceGroup OBJECT-GROUP OBJECTS { ipMRouteInterfaceHCInMcastOctets, ipMRouteInterfaceHCOutMcastOctets, ipMRouteHCOctets } STATUS current DESCRIPTION "A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) network interfaces." ::= { ipMRouteMIBGroups 5 } ipMRouteMIBRouteGroup OBJECT-GROUP OBJECTS { ipMRouteRtProto, ipMRouteRtAddress, ipMRouteRtMask, ipMRouteRtType } STATUS current DESCRIPTION "A collection of objects providing information on the relationship between multicast routing information, and the IP Forwarding Table." ::= { ipMRouteMIBGroups 6 } ipMRouteMIBPktsGroup OBJECT-GROUP OBJECTS { ipMRoutePkts, ipMRouteDifferentInIfPackets, ipMRouteOctets } STATUS current DESCRIPTION "A collection of objects to support management of packet counters for each forwarding entry." ::= { ipMRouteMIBGroups 7 } END