FRAMEWORK-FEEDBACK-PIB PIB-DEFINITIONS ::= BEGIN IMPORTS pib, Unsigned32, Unsigned64, Integer32, MODULE-IDENTITY, OBJECT-TYPE, MODULE-COMPLIANCE, OBJECT-GROUP FROM COPS-PR-SPPI TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC InstanceId, ReferenceId, Prid, TagId, TagReferenceId FROM COPS-PR-SPPI-TC PrcIdentifierOid, PrcIdentifierOidOrZero FROM FRAMEWORK-TC-PIB frwkRoleComboEntry FROM FRAMEWORK-PIB InterfaceIndex FROM IF-MIB; frwkFeedbackPib MODULE-IDENTITY SUBJECT-CATEGORIES { all } LAST-UPDATED "200307140000Z" -- 14 July 2003 ORGANIZATION "IETF RAP WG" CONTACT-INFO "IETF RAP WG Email: rap@ops.ietf.org Diana Rawlins MCI 400 International Parkway Richardson, Texas 75081 Phone: 972-729-4071 Email: Diana.Rawlins@mci.com Amol Kulkarni JF3-206 2111 NE 25th Ave Hillsboro, Oregon 97124 Phone: 503-712-1168 Email: amol.kulkarni@intel.com Kwok Ho Chan Nortel Networks 600 Technology Park Drive Billerica, MA 01821 USA Phone: 978-288-8175 Email: khchan@nortelnetworks.com Martin Bokaemper Juniper Networks 700 Silver Seven Road Kanata, ON, K2V 1C3, Canada Phone: 613-591-2735 Email: mbokaemper@juniper.net Dinesh G Dutt Cisco Systems, Inc. 170 Tasman Dr. San Jose, CA 95134-1706 Phone: 408-527-0955 Email: ddutt@cisco.com" DESCRIPTION "The PIB module containing the base set of policy rule classes that are required for support of all policy usage monitoring, tracking and reporting policies. Copyright (C) The Internet Society (2003). This version of this PIB module is part of RFC 3571; see the RFC itself for full legal notices." REVISION "200307140000Z" DESCRIPTION "Initial version, published in RFC 3571." ::= { pib 5 } -- -- Textual Conventions -- Usage32 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Usage32 type represents a non-negative integer which monotonically increases. Usage32 initial value is 0 and the object-type using Usage32 needs to specify when it is initialized. The Usage32 type is intended to reflect the absolute number of counted events, so that even a new PDP after a COPS reconnect can use the value directly. If there is the possibility that the maximum Usage32 value of 2^32-1 is exceeded during the lifetime of the Usage32 object, the larger Usage64 type should be used. If conditions other than the reset of the COPS subsystem exist that disrupt the monotonic characteristics of Usage32, these conditions and a method how to detect their presence should be specified in the description of the object-type using Usage32 or its enclosing object-types (e.g. the Entry or Table object-type of the Usage32 object-type). Whenever the monotonic increase of Usage32 is violated, it should be reset to 0 and the fact that this occurred should be indicated through an appropriate mechanism, for example a corresponding object of type TimeStamp or TimeAndDate." SYNTAX Unsigned32 Usage64 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Usage64 type represents a non-negative integer which monotonically increases. Usage64 initial value is 0 and the object-type using Usage64 needs to specify when it is initialized. The Usage64 type is intended to reflect the absolute number of counted events, so that even a new PDP after a COPS reconnect can use the value directly. The lifetime of the Usage64 object should be defined in a way that ensures the maximum Usage64 value of 2^64-1 is never exceeded. If conditions other than the reset of the COPS subsystem exist that disrupt the monotonic characteristics of Usage64, these conditions and a method how to detect their presence should be specified in the description of the object-type using Usage64 or its enclosing object-types (e.g. the Entry or Table object-type of the Usage64 object-type). Whenever the monotonic increase of Usage64 is violated, it should be reset to 0 and the fact that this occurred should be indicated through an appropriate mechanism, for example a corresponding object of type TimeStamp or TimeAndDate." SYNTAX Unsigned64 -- -- The feedback report group -- frwkFeedbackGroupClasses OBJECT IDENTIFIER ::= { frwkFeedbackPib 1 } -- -- Feedback Action Table -- frwkFeedbackActionTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackActionEntry PIB-ACCESS install STATUS current DESCRIPTION "This class represents commands that the PDP sends to suspend, resume or solicit collection or reporting of usage data." ::= { frwkFeedbackGroupClasses 1} frwkFeedbackActionEntry OBJECT-TYPE SYNTAX FrwkFeedbackActionEntry STATUS current DESCRIPTION "Each frwkFeedbackActionEntry represents a command from the PDP. FrwkFeedbackActionIndicator specifies the command itself while frwkFeedbackActionSpecificPri indicates if all frwkFeedbackLink objects in the system are affected by the command, or just the set that is referenced by frwkFeedbackActionList." PIB-INDEX { frwkFeedbackActionId} ::= { frwkFeedbackActionTable 1} FrwkFeedbackActionEntry ::= SEQUENCE { frwkFeedbackActionId InstanceId, frwkFeedbackActionIndicator INTEGER, frwkFeedbackActionSpecificPri TruthValue, frwkFeedbackActionList TagReferenceId } frwkFeedbackActionId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An arbitrary integer index that uniquely identifies an instance of the frwkFeedbackAction class." ::= { frwkFeedbackActionEntry 1} frwkFeedbackActionIndicator OBJECT-TYPE SYNTAX INTEGER { suspendMonitoringAndReports(1), suspendReports(2), resume(3), solicitReport(4) } STATUS current DESCRIPTION "The value indicates if the PEP is to send cached usage policies via COPS accounting type report messages. The enumeration values are: (1) suspendMonitoringAndReports (2) suspendReports (3) resume (4) solicitReport " ::= { frwkFeedbackActionEntry 2 } frwkFeedbackActionSpecificPri OBJECT-TYPE SYNTAX TruthValue STATUS current DESCRIPTION "A value of 0 indicates that the frwkFeedbackActionList attribute should be ignored, and the action applied to all policies. A value of 1 indicates that the action entry has a specific list of policies to which it is to be applied." ::= { frwkFeedbackActionEntry 3} frwkFeedbackActionList OBJECT-TYPE SYNTAX TagReferenceId PIB-TAG { frwkFeedbackActionListTag } STATUS current DESCRIPTION "Identifies a group of frwkFeedbackLink instances that this action should affect. The group is identified through a tag reference in the frwkFeedbackList class." ::= { frwkFeedbackActionEntry 4} -- -- Feedback Action List Table -- frwkFeedbackActionListTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackActionListEntry PIB-ACCESS install STATUS current DESCRIPTION "This class defines groups of linkage instances. Groups can be referenced by commands sent by the PDP in a frwkFeedbackActionEntry -in this case the command affects all linkage instances that are part of the group. A group can be referred to by its tag stored in frwkFeedbackActionListTag." ::= { frwkFeedbackGroupClasses 2} frwkFeedbackActionListEntry OBJECT-TYPE SYNTAX FrwkFeedbackActionListEntry STATUS current DESCRIPTION "Each instance associates a linkage instance with a specific ActionListGroup." PIB-INDEX {frwkFeedbackActionListId } UNIQUENESS { frwkFeedbackActionListTag, frwkFeedbackActionListRefID } ::= { frwkFeedbackActionListTable 1} FrwkFeedbackActionListEntry::= SEQUENCE { frwkFeedbackActionListId InstanceId, frwkFeedbackActionListTag TagId, frwkFeedbackActionListRefID ReferenceId } frwkFeedbackActionListId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "Arbitrary integer index that uniquely identifies an instance of the class." ::= { frwkFeedbackActionListEntry 1 } frwkFeedbackActionListTag OBJECT-TYPE SYNTAX TagId STATUS current DESCRIPTION "Identifies a group of linkage instances that can be referenced from the Action class." ::= { frwkFeedbackActionListEntry 2 } frwkFeedbackActionListRefID OBJECT-TYPE SYNTAX ReferenceId PIB-REFERENCES { frwkFeedbackLinkEntry } STATUS current DESCRIPTION "A frwkFeedbackLink instance that is referred to by this ReferenceId becomes part of the group, that is identified by the frwkFeedbackActionListTag." ::= { frwkFeedbackActionListEntry 3 } -- -- The Feedback Link Capability Table -- frwkFeedbackLinkCapsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackLinkCapsEntry PIB-ACCESS notify STATUS current DESCRIPTION "Instances of the frwkFeedbackLink class reference instances of selection and threshold classes and a usage class. This class allows the PEP to communicate valid combinations of these three classes to the PDP." ::= { frwkFeedbackGroupClasses 3} frwkFeedbackLinkCapsEntry OBJECT-TYPE SYNTAX FrwkFeedbackLinkCapsEntry STATUS current DESCRIPTION "The attributes of this class identify valid combinations of selection criteria, usage and threshold classes for feedback." PIB-INDEX { frwkFeedbackLinkCapsId } UNIQUENESS { frwkFeedbackLinkCapsSelection, frwkFeedbackLinkCapsUsage, frwkFeedbackLinkCapsThreshold } ::= {frwkFeedbackLinkCapsTable 1} FrwkFeedbackLinkCapsEntry ::= SEQUENCE { frwkFeedbackLinkCapsId InstanceId, frwkFeedbackLinkCapsSelection PrcIdentifierOid, frwkFeedbackLinkCapsUsage PrcIdentifierOid, frwkFeedbackLinkCapsThreshold PrcIdentifierOidOrZero } frwkFeedbackLinkCapsId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An arbitrary integer index that uniquely identifies an instance of the frwkFeedbackLinkCaps class." ::= { frwkFeedbackLinkCapsEntry 1} frwkFeedbackLinkCapsSelection OBJECT-TYPE SYNTAX PrcIdentifierOid STATUS current DESCRIPTION "The identifier of a class that is supported by the device for feedback selection in combination with the usage and threshold classes referenced in this instance." ::= { frwkFeedbackLinkCapsEntry 2} frwkFeedbackLinkCapsUsage OBJECT-TYPE SYNTAX PrcIdentifierOid STATUS current DESCRIPTION "The identifier of the usage class that is supported by the PEP in combination with the selection and threshold classes referenced in this instance." ::= { frwkFeedbackLinkCapsEntry 3} frwkFeedbackLinkCapsThreshold OBJECT-TYPE SYNTAX PrcIdentifierOidOrZero STATUS current DESCRIPTION "The identifier of the threshold class that is supported by the PEP in combination with the selection and usage classes referenced in this instance. 0.0 is used if this combination does not allow a threshold." ::= { frwkFeedbackLinkCapsEntry 4} -- -- The Feedback Report Linkage Table -- frwkFeedbackLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackLinkEntry PIB-ACCESS install STATUS current DESCRIPTION "This class associates the selection criteria with the usage policy. It also permits the defining of the max interval used for reporting the usage instance." ::= { frwkFeedbackGroupClasses 4} frwkFeedbackLinkEntry OBJECT-TYPE SYNTAX FrwkFeedbackLinkEntry STATUS current DESCRIPTION "This class associates the selection criteria with the usage policy. It also permits the defining of the max interval used for reporting the usage instance." PIB-INDEX { frwkFeedbackLinkId } UNIQUENESS {frwkFeedbackLinkSel, frwkFeedbackLinkUsage } ::= {frwkFeedbackLinkTable 1} FrwkFeedbackLinkEntry ::= SEQUENCE { frwkFeedbackLinkId InstanceId, frwkFeedbackLinkSel Prid, frwkFeedbackLinkUsage PrcIdentifierOid, frwkFeedbackLinkInterval Integer32, frwkFeedbackLinkThreshold Prid, frwkFeedbackLinkFlags BITS } frwkFeedbackLinkId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "An arbitrary integer index that uniquely identifies an instance of the frwkFeedbackLinkTable class." ::= { frwkFeedbackLinkEntry 1} frwkFeedbackLinkSel OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "The PRID of the Policy Class instance as the monitoring point, or the PRID of the selection criteria instance that defines the conditions for monitoring, to be use by the PEP for usage reporting." ::= { frwkFeedbackLinkEntry 2} frwkFeedbackLinkUsage OBJECT-TYPE SYNTAX PrcIdentifierOid STATUS current DESCRIPTION "The identifier of the usage class that the PEP uses to monitor, record and report." ::= { frwkFeedbackLinkEntry 3} frwkFeedbackLinkInterval OBJECT-TYPE SYNTAX Integer32 STATUS current DESCRIPTION "Maximum interval in units of the value of the Accounting Timer specified by the PDP in the client accept message. A frwkFeedbackLinkInterval of 1 is equal to the value of the Accounting Timer. This value must be 1 or greater. " ::= { frwkFeedbackLinkEntry 4} frwkFeedbackLinkThreshold OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "The PRID of a threshold class instance. This instance specifies the threshold values for the usage policy." ::= { frwkFeedbackLinkEntry 5} frwkFeedbackLinkFlags OBJECT-TYPE SYNTAX BITS { periodic(0), threshold(1), changeOnly(2) } STATUS current DESCRIPTION "This value indicates the reporting basis of the usage policy. The feed back may be generated on demand, on a periodic basis regardless of a change in value from the previous report, on a periodic basis if a change in value has occurred, or the usage is reported when an identified threshold value in the usage instance has been reached. If the 'periodic' flag is set, the PEP will provide unsolicited reports at the rate specified in frwkFeedbackLinkInterval. If the 'periodic' flag is not set, reports will only be generated when solicited by the PDP. The 'threshold' and 'changeOnly' flags make the periodic reports conditional - these flags only make sense in combination with the 'periodic' flag." ::= { frwkFeedbackLinkEntry 6} -- -- The Threshold class that accompanies the above Usage PRCs -- frwkFeedbackTrafficThresTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackTrafficThresEntry PIB-ACCESS install STATUS current DESCRIPTION "This class defines the threshold attributes corresponding to usage attributes specified in frwkFeedbackTrafficTable, frwkFeedbackIfTrafficTable and other similar usage classes. The usage object is considered to match the threshold condition if at least one of the packet or byte threshold conditions match. The byte and packet thresholds are considered to match, if the threshold is present (not ASN1 NULL) and the corresponding usage value exceeds the threshold." ::= { frwkFeedbackGroupClasses 5} frwkFeedbackTrafficThresEntry OBJECT-TYPE SYNTAX FrwkFeedbackTrafficThresEntry STATUS current DESCRIPTION "Defines the attributes to hold threshold values." PIB-INDEX {frwkFeedbackTrafficThresId} ::= {frwkFeedbackTrafficThresTable 1} FrwkFeedbackTrafficThresEntry ::= SEQUENCE { frwkFeedbackTrafficThresId InstanceId, frwkFeedbackTrafficThresPackets Unsigned64, frwkFeedbackTrafficThresBytes Unsigned64 } frwkFeedbackTrafficThresId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "Arbitrary integer index that uniquely identifies an instance of the class." ::= { frwkFeedbackTrafficThresEntry 1 } frwkFeedbackTrafficThresPackets OBJECT-TYPE SYNTAX Unsigned64 STATUS current DESCRIPTION "The threshold, in terms of packets, that must be matched or exceeded to trigger a report in the next reporting interval." ::= { frwkFeedbackTrafficThresEntry 2 } frwkFeedbackTrafficThresBytes OBJECT-TYPE SYNTAX Unsigned64 STATUS current DESCRIPTION "The threshold, in terms of bytes, that must be exceeded to trigger a report in the next reporting interval." ::= { frwkFeedbackTrafficThresEntry 3 } -- -- All actual usage classes are in the separate -- frwkFeedbackUsageClasses group -- frwkFeedbackUsageClasses OBJECT IDENTIFIER ::= { frwkFeedbackPib 2 } -- -- The generic traffic (byte & packet count) usage class -- frwkFeedbackTrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackTrafficEntry PIB-ACCESS report-only STATUS current DESCRIPTION "This class defines the usage attributes that the PEP is to monitor for plain traffic handling elements like filters. All packets and the bytes contained in these packets are counted. It also contains the PRID of the linkage instance associating the selection criteria instance with the usage instance." ::= { frwkFeedbackUsageClasses 1} frwkFeedbackTrafficEntry OBJECT-TYPE SYNTAX FrwkFeedbackTrafficEntry STATUS current DESCRIPTION "Defines the attributes the PEP is to monitor, record and report." PIB-INDEX {frwkFeedbackTrafficId} UNIQUENESS { frwkFeedbackTrafficLinkRefID } ::= {frwkFeedbackTrafficTable 1} FrwkFeedbackTrafficEntry ::= SEQUENCE { frwkFeedbackTrafficId InstanceId, frwkFeedbackTrafficLinkRefID ReferenceId, frwkFeedbackTrafficPacketCount Usage64, frwkFeedbackTrafficByteCount Usage64 } frwkFeedbackTrafficId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "Arbitrary integer index that uniquely identifies an instance of the class." ::= { frwkFeedbackTrafficEntry 1 } frwkFeedbackTrafficLinkRefID OBJECT-TYPE SYNTAX ReferenceId PIB-REFERENCES { frwkFeedbackLinkEntry } STATUS current DESCRIPTION "The ReferenceId of the Linkage policy instance used to base this usage policy instance upon." ::= { frwkFeedbackTrafficEntry 2 } frwkFeedbackTrafficPacketCount OBJECT-TYPE SYNTAX Usage64 STATUS current DESCRIPTION "The count of packets handled by the associated element. The initial value of 0 is set when the frwkFeedbackTraffic instance is created, for example triggered through the creation of a frwkFeedbackLink instance." ::= {frwkFeedbackTrafficEntry 3} frwkFeedbackTrafficByteCount OBJECT-TYPE SYNTAX Usage64 STATUS current DESCRIPTION "The byte count of packets handled by the associated element. The initial value of 0 is set when the frwkFeedbackTraffic instance is created." ::= { frwkFeedbackTrafficEntry 4} -- -- The traffic usage class, qualified for an interface -- frwkFeedbackIfTrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackIfTrafficEntry PIB-ACCESS report-only STATUS current DESCRIPTION "A usage class similar to the basic Traffic class that also contains a reference to an interface index. This class should be used with an underspecified selection criteria entry from the frwkRoleComboTable that matches an element that can be assigned to multiple interface indices. The interface field can be used to associate the instances of this class with the specific element's assignment." ::= { frwkFeedbackUsageClasses 2 } frwkFeedbackIfTrafficEntry OBJECT-TYPE SYNTAX FrwkFeedbackIfTrafficEntry STATUS current DESCRIPTION "Defines the attributes the PEP is to monitor, record and report." PIB-INDEX {frwkFeedbackIfTrafficId} UNIQUENESS { frwkFeedbackIfTrafficLinkRefID, frwkFeedbackIfTrafficIfIndex } ::= {frwkFeedbackIfTrafficTable 1} FrwkFeedbackIfTrafficEntry ::= SEQUENCE { frwkFeedbackIfTrafficId InstanceId, frwkFeedbackIfTrafficLinkRefID ReferenceId, frwkFeedbackIfTrafficIfIndex InterfaceIndex, frwkFeedbackIfTrafficPacketCount Usage64, frwkFeedbackIfTrafficByteCount Usage64 } frwkFeedbackIfTrafficId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "Arbitrary integer index that uniquely identifies an instance of the class." ::= { frwkFeedbackIfTrafficEntry 1 } frwkFeedbackIfTrafficLinkRefID OBJECT-TYPE SYNTAX ReferenceId PIB-REFERENCES { frwkFeedbackLinkEntry } STATUS current DESCRIPTION "The ReferenceId of the Linkage policy instance used to base this usage policy instance upon." ::= { frwkFeedbackIfTrafficEntry 2 } frwkFeedbackIfTrafficIfIndex OBJECT-TYPE SYNTAX InterfaceIndex STATUS current DESCRIPTION "The value of this attribute is the ifIndex which is associated with the specified RoleCombination and interface capability set name." ::= { frwkFeedbackIfTrafficEntry 3 } frwkFeedbackIfTrafficPacketCount OBJECT-TYPE SYNTAX Usage64 STATUS current DESCRIPTION "The count of packets handled by the associated element. The initial value of 0 is set when the frwkFeedbackIfTraffic instance is created." ::= { frwkFeedbackIfTrafficEntry 4 } frwkFeedbackIfTrafficByteCount OBJECT-TYPE SYNTAX Usage64 STATUS current DESCRIPTION "The byte count of packets handled by the associated element. The initial value of 0 is set when the frwkFeedbackIfTraffic instance is created." ::= { frwkFeedbackIfTrafficEntry 5 } -- -- All Selection classes are in the separate -- FrwkFeedbackSelectionClasses group -- frwkFeedbackSelectionClasses OBJECT IDENTIFIER ::= { frwkFeedbackPib 3 } -- -- The Role Combination Filter Selection Table -- frwkFeedbackRoleFilterSelTable OBJECT-TYPE SYNTAX SEQUENCE OF FrwkFeedbackRoleFilterSelEntry PIB-ACCESS install STATUS current DESCRIPTION "A selection class that defines selection of objects for monitoring based on the role combination, capability set and a filter." ::= { frwkFeedbackSelectionClasses 1 } frwkFeedbackRoleFilterSelEntry OBJECT-TYPE SYNTAX FrwkFeedbackRoleFilterSelEntry STATUS current DESCRIPTION "Each instance selects a filter on multiple interfaces that share the same frwkRoleCombo instance." PIB-INDEX { frwkFeedbackRoleFilterSelId} UNIQUENESS { frwkFeedbackRoleFilterSelRCombo, frwkFeedbackRoleFilterSelFilter } ::= {frwkFeedbackRoleFilterSelTable 1} FrwkFeedbackRoleFilterSelEntry ::= SEQUENCE { frwkFeedbackRoleFilterSelId InstanceId, frwkFeedbackRoleFilterSelRCombo ReferenceId, frwkFeedbackRoleFilterSelFilter Prid } frwkFeedbackRoleFilterSelId OBJECT-TYPE SYNTAX InstanceId STATUS current DESCRIPTION "Arbitrary integer index that uniquely identifies an instance of the class." ::= { frwkFeedbackRoleFilterSelEntry 1 } frwkFeedbackRoleFilterSelRCombo OBJECT-TYPE SYNTAX ReferenceId PIB-REFERENCES { frwkRoleComboEntry } STATUS current DESCRIPTION "The ReferenceId of the frwkRoleComboTable policy instance used for selection." ::= { frwkFeedbackRoleFilterSelEntry 2 } frwkFeedbackRoleFilterSelFilter OBJECT-TYPE SYNTAX Prid STATUS current DESCRIPTION "The identifier of a filter instance. Valid classes are the subclasses of frwkBaseFilter: - frwkIpFilter - frwk802Filter - frwkILabelFilter" ::= { frwkFeedbackRoleFilterSelEntry 3 } -- -- Compliance Section -- frwkFeedbackPibConformance OBJECT IDENTIFIER ::= { frwkFeedbackPib 4 } frwkFeedbackPibCompliances OBJECT IDENTIFIER ::= { frwkFeedbackPibConformance 1 } frwkFeedbackPibGroups OBJECT IDENTIFIER ::= { frwkFeedbackPibConformance 2 } frwkFeedbackPibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the feedback framework PIB" MODULE -- this module MANDATORY-GROUPS { frwkFeedbackLinkCapsGroup, frwkFeedbackLinkGroup, frwkFeedbackActionGroup } GROUP frwkFeedbackActionListGroup DESCRIPTION "The frwkFeedbackActionListGroup is mandatory if actions on subsets linkEntries are to be supported." GROUP frwkFeedbackTrafficGroup DESCRIPTION "The frwkFeedbackTrafficGroup is mandatory if monitoring of traffic data is to be supported." GROUP frwkFeedbackTrafficThresGroup DESCRIPTION "The frwkFeedbackTrafficThresGroup is mandatory if conditional reporting of traffic usage thresholds is to be supported." GROUP frwkFeedbackIfTrafficGroup DESCRIPTION "The frwkFeedbackIfTrafficGroup is mandatory if per-interface usage collection of traffic data is to be supported." GROUP frwkFeedbackRoleFilterSelGroup DESCRIPTION "The frwkFeedbackRoleFilterSelGroup is mandatory if monitoring of filters referenced through the frwkRoleCombo class is to be supported." ::= { frwkFeedbackPibCompliances 1 } frwkFeedbackLinkCapsGroup OBJECT-GROUP OBJECTS { frwkFeedbackLinkCapsId, frwkFeedbackLinkCapsSelection, frwkFeedbackLinkCapsUsage, frwkFeedbackLinkCapsThreshold } STATUS current DESCRIPTION "Objects from the frwkFeedbackLinkCapsTable." ::= { frwkFeedbackPibGroups 1 } frwkFeedbackLinkGroup OBJECT-GROUP OBJECTS { frwkFeedbackLinkId, frwkFeedbackLinkSel, frwkFeedbackLinkUsage, frwkFeedbackLinkInterval, frwkFeedbackLinkThreshold, frwkFeedbackLinkFlags } STATUS current DESCRIPTION "Objects from the frwkFeedbackLinkTable." ::= { frwkFeedbackPibGroups 2 } frwkFeedbackActionGroup OBJECT-GROUP OBJECTS { frwkFeedbackActionId, frwkFeedbackActionIndicator, frwkFeedbackActionSpecificPri, frwkFeedbackActionList } STATUS current DESCRIPTION "Objects from the frwkFeedbackActionTable." ::= { frwkFeedbackPibGroups 3 } frwkFeedbackActionListGroup OBJECT-GROUP OBJECTS { frwkFeedbackActionListId, frwkFeedbackActionListTag, frwkFeedbackActionListRefID } STATUS current DESCRIPTION "Objects from the frwkFeedbackActionListTable." ::= { frwkFeedbackPibGroups 4 } frwkFeedbackTrafficGroup OBJECT-GROUP OBJECTS { frwkFeedbackTrafficId, frwkFeedbackTrafficLinkRefID, frwkFeedbackTrafficPacketCount, frwkFeedbackTrafficByteCount } STATUS current DESCRIPTION "Objects from the frwkFeedbackTrafficTable." ::= { frwkFeedbackPibGroups 5 } frwkFeedbackTrafficThresGroup OBJECT-GROUP OBJECTS { frwkFeedbackTrafficThresId, frwkFeedbackTrafficThresPackets, frwkFeedbackTrafficThresBytes } STATUS current DESCRIPTION "Objects from the frwkFeedbackTrafficThresTable." ::= { frwkFeedbackPibGroups 6 } frwkFeedbackIfTrafficGroup OBJECT-GROUP OBJECTS { frwkFeedbackIfTrafficId, frwkFeedbackIfTrafficLinkRefID, frwkFeedbackIfTrafficIfIndex, frwkFeedbackIfTrafficPacketCount, frwkFeedbackIfTrafficByteCount } STATUS current DESCRIPTION "Objects from the frwkFeedbackIfTrafficTable." ::= { frwkFeedbackPibGroups 7 } frwkFeedbackRoleFilterSelGroup OBJECT-GROUP OBJECTS { frwkFeedbackRoleFilterSelId, frwkFeedbackRoleFilterSelRCombo, frwkFeedbackRoleFilterSelFilter } STATUS current DESCRIPTION "Objects from the frwkFeedbackRoleFilterSelTable." ::= { frwkFeedbackPibGroups 8 } END