RADIUS-DYNAUTH-CLIENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Gauge32, Integer32,
mib-2, TimeTicks FROM SNMPv2-SMI -- [RFC2578]
SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
InetAddressType, InetAddress,
InetPortNumber FROM INET-ADDRESS-MIB -- [RFC4001]
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF; -- [RFC2580]
radiusDynAuthClientMIB MODULE-IDENTITY
LAST-UPDATED "200608290000Z" -- 29 August 2006
ORGANIZATION "IETF RADEXT Working Group"
CONTACT-INFO
" Stefaan De Cnodder
Alcatel
Francis Wellesplein 1
B-2018 Antwerp
Belgium
Phone: +32 3 240 85 15
EMail: stefaan.de_cnodder@alcatel.be
Nagi Reddy Jonnala
Cisco Systems, Inc.
Divyasree Chambers, B Wing,
O'Shaugnessy Road,
Bangalore-560027, India.
Phone: +91 94487 60828
EMail: njonnala@cisco.com
Murtaza Chiba
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose CA, 95134
Phone: +1 408 525 7198
EMail: mchiba@cisco.com "
DESCRIPTION
"The MIB module for entities implementing the client
side of the Dynamic Authorization Extensions to the
Remote Authentication Dial-In User Service (RADIUS)
protocol. Copyright (C) The Internet Society (2006).
Initial version as published in RFC 4672;
for full legal notices see the RFC itself."
REVISION "200609290000Z" -- 29 August 2006
DESCRIPTION "Initial version as published in RFC 4672"
::= { mib-2 145 }
radiusDynAuthClientMIBObjects OBJECT IDENTIFIER ::=
{ radiusDynAuthClientMIB 1 }
radiusDynAuthClientScalars OBJECT IDENTIFIER ::=
{ radiusDynAuthClientMIBObjects 1 }
radiusDynAuthClientDisconInvalidServerAddresses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Disconnect-Ack and Disconnect-NAK packets
received from unknown addresses. This counter may
experience a discontinuity when the DAC module
(re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
::= { radiusDynAuthClientScalars 1 }
radiusDynAuthClientCoAInvalidServerAddresses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CoA-Ack and CoA-NAK packets received from
unknown addresses. Disconnect-NAK packets received
from unknown addresses. This counter may experience a
discontinuity when the DAC module (re)starts, as
indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
::= { radiusDynAuthClientScalars 2 }
radiusDynAuthServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusDynAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the RADIUS Dynamic
Authorization Servers with which the client shares a
secret."
::= { radiusDynAuthClientMIBObjects 2 }
radiusDynAuthServerEntry OBJECT-TYPE
SYNTAX RadiusDynAuthServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing one Dynamic
Authorization Server with which the client shares a
secret."
INDEX { radiusDynAuthServerIndex }
::= { radiusDynAuthServerTable 1 }
RadiusDynAuthServerEntry ::= SEQUENCE {
radiusDynAuthServerIndex Integer32,
radiusDynAuthServerAddressType InetAddressType,
radiusDynAuthServerAddress InetAddress,
radiusDynAuthServerClientPortNumber InetPortNumber,
radiusDynAuthServerID SnmpAdminString,
radiusDynAuthClientRoundTripTime TimeTicks,
radiusDynAuthClientDisconRequests Counter32,
radiusDynAuthClientDisconAuthOnlyRequests Counter32,
radiusDynAuthClientDisconRetransmissions Counter32,
radiusDynAuthClientDisconAcks Counter32,
radiusDynAuthClientDisconNaks Counter32,
radiusDynAuthClientDisconNakAuthOnlyRequest Counter32,
radiusDynAuthClientDisconNakSessNoContext Counter32,
radiusDynAuthClientMalformedDisconResponses Counter32,
radiusDynAuthClientDisconBadAuthenticators Counter32,
radiusDynAuthClientDisconPendingRequests Gauge32,
radiusDynAuthClientDisconTimeouts Counter32,
radiusDynAuthClientDisconPacketsDropped Counter32,
radiusDynAuthClientCoARequests Counter32,
radiusDynAuthClientCoAAuthOnlyRequest Counter32,
radiusDynAuthClientCoARetransmissions Counter32,
radiusDynAuthClientCoAAcks Counter32,
radiusDynAuthClientCoANaks Counter32,
radiusDynAuthClientCoANakAuthOnlyRequest Counter32,
radiusDynAuthClientCoANakSessNoContext Counter32,
radiusDynAuthClientMalformedCoAResponses Counter32,
radiusDynAuthClientCoABadAuthenticators Counter32,
radiusDynAuthClientCoAPendingRequests Gauge32,
radiusDynAuthClientCoATimeouts Counter32,
radiusDynAuthClientCoAPacketsDropped Counter32,
radiusDynAuthClientUnknownTypes Counter32,
radiusDynAuthClientCounterDiscontinuity TimeTicks
}
radiusDynAuthServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each RADIUS Dynamic
Authorization Server with which this Dynamic
Authorization Client communicates. This number is
allocated by the agent implementing this MIB module
and is unique in this context."
::= { radiusDynAuthServerEntry 1 }
radiusDynAuthServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of IP address of the RADIUS Dynamic
Authorization Server referred to in this table entry."
::= { radiusDynAuthServerEntry 2 }
radiusDynAuthServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address value of the RADIUS Dynamic
Authorization Server referred to in this table entry
using the version neutral IP address format. The type
of this address is determined by the value of the
radiusDynAuthServerAddressType object."
::= { radiusDynAuthServerEntry 3 }
radiusDynAuthServerClientPortNumber OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP destination port that the RADIUS Dynamic
Authorization Client is using to send requests to this
server. The value zero is invalid."
::= { radiusDynAuthServerEntry 4 }
radiusDynAuthServerID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier of the RADIUS Dynamic Authorization
Server referred to in this table entry. This is not
necessarily the same as sysName in MIB II."
REFERENCE
"RFC 2865, Section 5.32, NAS-Identifier."
::= { radiusDynAuthServerEntry 5 }
radiusDynAuthClientRoundTripTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "hundredths of a second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval (in hundredths of a second) between
the most recent Disconnect or CoA request and the
receipt of the corresponding Disconnect or CoA reply.
A value of zero is returned if no reply has been
received yet from this server."
::= { radiusDynAuthServerEntry 6 }
radiusDynAuthClientDisconRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-Requests sent
to this Dynamic Authorization Server. This also
includes the RADIUS Disconnect-Requests that have a
Service-Type attribute with value 'Authorize Only'.
Disconnect-NAK packets received from unknown addresses.
This counter may experience a discontinuity when the
DAC module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 7 }
radiusDynAuthClientDisconAuthOnlyRequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-Requests that include a
Service-Type attribute with value 'Authorize Only'
sent to this Dynamic Authorization Server.
Disconnect-NAK packets received from unknown addresses.
This counter may experience a discontinuity when the
DAC module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 8 }
radiusDynAuthClientDisconRetransmissions OBJECT-TYPE
SYNTAX Counter32
UNITS "retransmissions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-request packets
retransmitted to this RADIUS Dynamic Authorization
Server. Disconnect-NAK packets received from unknown
addresses. This counter may experience a discontinuity
when the DAC module (re)starts, as indicated by the
value of radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 9 }
radiusDynAuthClientDisconAcks OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-ACK packets
received from this Dynamic Authorization Server. This
counter may experience a discontinuity when the DAC
module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 10 }
radiusDynAuthClientDisconNaks OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-NAK packets
received from this Dynamic Authorization Server.
This includes the RADIUS Disconnect-NAK packets
received with a Service-Type attribute with value
'Authorize Only' and the RADIUS Disconnect-NAK
packets received if no session context was found. This
counter may experience a discontinuity when the DAC
module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 11 }
radiusDynAuthClientDisconNakAuthOnlyRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-NAK packets
that include a Service-Type attribute with value
'Authorize Only' received from this Dynamic
Authorization Server. This counter may experience a
discontinuity when the DAC module (re)starts, as
indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 12 }
radiusDynAuthClientDisconNakSessNoContext OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-NAK packets
received from this Dynamic Authorization Server
because no session context was found; i.e., it
includes an Error-Cause attribute with value 503
('Session Context Not Found'). This counter may
experience a discontinuity when the DAC module
(re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 13 }
radiusDynAuthClientMalformedDisconResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS Disconnect-Ack and
Disconnect-NAK packets received from this Dynamic
Authorization Server. Bad authenticators and unknown
types are not included as malformed Disconnect-Ack and
Disconnect-NAK packets. This counter may experience a
discontinuity when the DAC module (re)starts, as
indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM), and
Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 14 }
radiusDynAuthClientDisconBadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-Ack and Disconnect-NAK
packets that contained invalid Authenticator field
received from this Dynamic Authorization Server. This
counter may experience a discontinuity when the DAC
module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM), and
Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 15 }
radiusDynAuthClientDisconPendingRequests OBJECT-TYPE
SYNTAX Gauge32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS Disconnect-request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when an Disconnect-Request is sent and decremented
due to receipt of a Disconnect-Ack, a Disconnect-NAK,
a timeout, or a retransmission."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 16 }
radiusDynAuthClientDisconTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Disconnect request timeouts to this
server. After a timeout, the client may retry to the
same server or give up. A retry to the same server is
counted as a retransmit and as a timeout. A send
to a different server is counted as a
Disconnect-Request and as a timeout. This counter
may experience a discontinuity when the DAC module
(re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM)."
::= { radiusDynAuthServerEntry 17 }
radiusDynAuthClientDisconPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming Disconnect-Ack and
Disconnect-NAK packets from this Dynamic Authorization
Server silently discarded by the client application for
some reason other than malformed, bad authenticators,
or unknown types. This counter may experience a
discontinuity when the DAC module (re)starts, as
indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.1, Disconnect Messages (DM), and
Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 18 }
radiusDynAuthClientCoARequests OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-Requests sent to this
Dynamic Authorization Server. This also includes
CoA requests that have a Service-Type attribute
with value 'Authorize Only'. This counter may
experience a discontinuity when the DAC module
(re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 19 }
radiusDynAuthClientCoAAuthOnlyRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-requests that include a
Service-Type attribute with value 'Authorize Only'
sent to this Dynamic Authorization Client. This
counter may experience a discontinuity when the DAC
module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 20 }
radiusDynAuthClientCoARetransmissions OBJECT-TYPE
SYNTAX Counter32
UNITS "retransmissions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-request packets
retransmitted to this RADIUS Dynamic Authorization
Server. This counter may experience a discontinuity
when the DAC module (re)starts, as indicated by the
value of radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 21 }
radiusDynAuthClientCoAAcks OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-ACK packets received from
this Dynamic Authorization Server. This counter may
experience a discontinuity when the DAC module
(re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 22 }
radiusDynAuthClientCoANaks OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-NAK packets received from
this Dynamic Authorization Server. This includes the
RADIUS CoA-NAK packets received with a Service-Type
attribute with value 'Authorize Only' and the RADIUS
CoA-NAK packets received because no session context
was found. This counter may experience a discontinuity
when the DAC module (re)starts, as indicated by the
value of radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 23 }
radiusDynAuthClientCoANakAuthOnlyRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-NAK packets that include a
Service-Type attribute with value 'Authorize Only'
received from this Dynamic Authorization Server. This
counter may experience a discontinuity when the DAC
module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 24 }
radiusDynAuthClientCoANakSessNoContext OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-NAK packets received from
this Dynamic Authorization Server because no session
context was found; i.e., it includes an Error-Cause
attribute with value 503 ('Session Context Not Found').
This counter may experience a discontinuity when the
DAC module (re)starts as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 25 }
radiusDynAuthClientMalformedCoAResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed RADIUS CoA-Ack and CoA-NAK
packets received from this Dynamic Authorization
Server. Bad authenticators and unknown types are
not included as malformed CoA-Ack and CoA-NAK packets.
This counter may experience a discontinuity when the
DAC module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA), and Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 26 }
radiusDynAuthClientCoABadAuthenticators OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-Ack and CoA-NAK packets
that contained invalid Authenticator field
received from this Dynamic Authorization Server.
This counter may experience a discontinuity when the
DAC module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA), and Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 27 }
radiusDynAuthClientCoAPendingRequests OBJECT-TYPE
SYNTAX Gauge32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RADIUS CoA-request packets destined for
this server that have not yet timed out or received a
response. This variable is incremented when an
CoA-Request is sent and decremented due to receipt of
a CoA-Ack, a CoA-NAK, or a timeout, or a
retransmission."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 28 }
radiusDynAuthClientCoATimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CoA request timeouts to this server.
After a timeout, the client may retry to the same
server or give up. A retry to the same server is
counted as a retransmit and as a timeout. A send to
a different server is counted as a CoA-Request and
as a timeout. This counter may experience a
discontinuity when the DAC module (re)starts, as
indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA)."
::= { radiusDynAuthServerEntry 29 }
radiusDynAuthClientCoAPacketsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming CoA-Ack and CoA-NAK from this
Dynamic Authorization Server silently discarded by the
client application for some reason other than
malformed, bad authenticators, or unknown types. This
counter may experience a discontinuity when the DAC
module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.2, Change-of-Authorization
Messages (CoA), and Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 30 }
radiusDynAuthClientUnknownTypes OBJECT-TYPE
SYNTAX Counter32
UNITS "replies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming packets of unknown types
that were received on the Dynamic Authorization port.
This counter may experience a discontinuity when the
DAC module (re)starts, as indicated by the value of
radiusDynAuthClientCounterDiscontinuity."
REFERENCE
"RFC 3576, Section 2.3, Packet Format."
::= { radiusDynAuthServerEntry 31 }
radiusDynAuthClientCounterDiscontinuity OBJECT-TYPE
SYNTAX TimeTicks
UNITS "hundredths of a second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
last counter discontinuity. A discontinuity may
be the result of a reinitialization of the DAC
module within the managed entity."
::= { radiusDynAuthServerEntry 32 }
-- conformance information
radiusDynAuthClientMIBConformance
OBJECT IDENTIFIER ::= { radiusDynAuthClientMIB 2 }
radiusDynAuthClientMIBCompliances
OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 1 }
radiusDynAuthClientMIBGroups
OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 2 }
-- compliance statements
radiusDynAuthClientMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities implementing
the RADIUS Dynamic Authorization Client.
Implementation of this module is for entities that
support IPv4 and/or IPv6."
MODULE -- this module
MANDATORY-GROUPS { radiusDynAuthClientMIBGroup }
OBJECT radiusDynAuthServerAddressType
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv4 and
globally unique IPv6 addresses."
OBJECT radiusDynAuthServerAddress
SYNTAX InetAddress (SIZE(4|16))
DESCRIPTION
"An implementation is only required to support IPv4 and
globally unique IPv6 addresses."
GROUP radiusDynAuthClientAuthOnlyGroup
DESCRIPTION
"Only required for Dynamic Authorization Clients that
are supporting Service-Type attributes with value
'Authorize-Only'."
GROUP radiusDynAuthClientNoSessGroup
DESCRIPTION
"This group is not required if the Dynamic
Authorization Server cannot easily determine whether
a session exists (e.g., in case of a RADIUS
proxy)."
::= { radiusDynAuthClientMIBCompliances 1 }
-- units of conformance
radiusDynAuthClientMIBGroup OBJECT-GROUP
OBJECTS { radiusDynAuthClientDisconInvalidServerAddresses,
radiusDynAuthClientCoAInvalidServerAddresses,
radiusDynAuthServerAddressType,
radiusDynAuthServerAddress,
radiusDynAuthServerClientPortNumber,
radiusDynAuthServerID,
radiusDynAuthClientRoundTripTime,
radiusDynAuthClientDisconRequests,
radiusDynAuthClientDisconRetransmissions,
radiusDynAuthClientDisconAcks,
radiusDynAuthClientDisconNaks,
radiusDynAuthClientMalformedDisconResponses,
radiusDynAuthClientDisconBadAuthenticators,
radiusDynAuthClientDisconPendingRequests,
radiusDynAuthClientDisconTimeouts,
radiusDynAuthClientDisconPacketsDropped,
radiusDynAuthClientCoARequests,
radiusDynAuthClientCoARetransmissions,
radiusDynAuthClientCoAAcks,
radiusDynAuthClientCoANaks,
radiusDynAuthClientMalformedCoAResponses,
radiusDynAuthClientCoABadAuthenticators,
radiusDynAuthClientCoAPendingRequests,
radiusDynAuthClientCoATimeouts,
radiusDynAuthClientCoAPacketsDropped,
radiusDynAuthClientUnknownTypes,
radiusDynAuthClientCounterDiscontinuity
}
STATUS current
DESCRIPTION
"The collection of objects providing management of
a RADIUS Dynamic Authorization Client."
::= { radiusDynAuthClientMIBGroups 1 }
radiusDynAuthClientAuthOnlyGroup OBJECT-GROUP
OBJECTS { radiusDynAuthClientDisconAuthOnlyRequests,
radiusDynAuthClientDisconNakAuthOnlyRequest,
radiusDynAuthClientCoAAuthOnlyRequest,
radiusDynAuthClientCoANakAuthOnlyRequest
}
STATUS current
DESCRIPTION
"The collection of objects supporting the RADIUS
messages including Service-Type attribute with
value 'Authorize Only'."
::= { radiusDynAuthClientMIBGroups 2 }
radiusDynAuthClientNoSessGroup OBJECT-GROUP
OBJECTS { radiusDynAuthClientDisconNakSessNoContext,
radiusDynAuthClientCoANakSessNoContext
}
STATUS current
DESCRIPTION
"The collection of objects supporting the RADIUS
messages that are referring to non-existing sessions."
::= { radiusDynAuthClientMIBGroups 3 }
END